# Copyright (c) Twisted Matrix Laboratories. # See LICENSE for details. """ A win32event based implementation of the Twisted main loop. This requires pywin32 (formerly win32all) or ActivePython to be installed. To install the event loop (and you should do this before any connections, listeners or connectors are added):: from twisted.internet import win32eventreactor win32eventreactor.install() LIMITATIONS: 1. WaitForMultipleObjects and thus the event loop can only handle 64 objects. 2. Process running has some problems (see L{twisted.internet.process} docstring). TODO: 1. Event loop handling of writes is *very* problematic (this is causing failed tests). Switch to doing it the correct way, whatever that means (see below). 2. Replace icky socket loopback waker with event based waker (use dummyEvent object) 3. Switch everyone to using Free Software so we don't have to deal with proprietary APIs. ALTERNATIVE SOLUTIONS: - IIRC, sockets can only be registered once. So we switch to a structure like the poll() reactor, thus allowing us to deal with write events in a decent fashion. This should allow us to pass tests, but we're still limited to 64 events. Or: - Instead of doing a reactor, we make this an addon to the select reactor. The WFMO event loop runs in a separate thread. This means no need to maintain separate code for networking, 64 event limit doesn't apply to sockets, we can run processes and other win32 stuff in default event loop. The only problem is that we're stuck with the icky socket based waker. Another benefit is that this could be extended to support >64 events in a simpler manner than the previous solution. The 2nd solution is probably what will get implemented. """ import sys # System imports import time from threading import Thread from weakref import WeakKeyDictionary from zope.interface import implementer # Win32 imports from win32file import FD_ACCEPT, FD_CLOSE, FD_CONNECT, FD_READ, WSAEventSelect try: # WSAEnumNetworkEvents was added in pywin32 215 from win32file import WSAEnumNetworkEvents except ImportError: import warnings warnings.warn( "Reliable disconnection notification requires pywin32 215 or later", category=UserWarning, ) def WSAEnumNetworkEvents(fd, event): return {FD_READ} import win32gui # type: ignore[import-untyped] from win32event import ( QS_ALLINPUT, WAIT_OBJECT_0, WAIT_TIMEOUT, CreateEvent, MsgWaitForMultipleObjects, ) # Twisted imports from twisted.internet import posixbase from twisted.internet.interfaces import IReactorFDSet, IReactorWin32Events from twisted.internet.threads import blockingCallFromThread from twisted.python import failure, log, threadable @implementer(IReactorFDSet, IReactorWin32Events) class Win32Reactor(posixbase.PosixReactorBase): """ Reactor that uses Win32 event APIs. @ivar _reads: A dictionary mapping L{FileDescriptor} instances to a win32 event object used to check for read events for that descriptor. @ivar _writes: A dictionary mapping L{FileDescriptor} instances to a arbitrary value. Keys in this dictionary will be given a chance to write out their data. @ivar _events: A dictionary mapping win32 event object to tuples of L{FileDescriptor} instances and event masks. @ivar _closedAndReading: Along with C{_closedAndNotReading}, keeps track of descriptors which have had close notification delivered from the OS but which we have not finished reading data from. MsgWaitForMultipleObjects will only deliver close notification to us once, so we remember it in these two dictionaries until we're ready to act on it. The OS has delivered close notification for each descriptor in this dictionary, and the descriptors are marked as allowed to handle read events in the reactor, so they can be processed. When a descriptor is marked as not allowed to handle read events in the reactor (ie, it is passed to L{IReactorFDSet.removeReader}), it is moved out of this dictionary and into C{_closedAndNotReading}. The descriptors are keys in this dictionary. The values are arbitrary. @type _closedAndReading: C{dict} @ivar _closedAndNotReading: These descriptors have had close notification delivered from the OS, but are not marked as allowed to handle read events in the reactor. They are saved here to record their closed state, but not processed at all. When one of these descriptors is passed to L{IReactorFDSet.addReader}, it is moved out of this dictionary and into C{_closedAndReading}. The descriptors are keys in this dictionary. The values are arbitrary. This is a weak key dictionary so that if an application tells the reactor to stop reading from a descriptor and then forgets about that descriptor itself, the reactor will also forget about it. @type _closedAndNotReading: C{WeakKeyDictionary} """ dummyEvent = CreateEvent(None, 0, 0, None) def __init__(self): self._reads = {} self._writes = {} self._events = {} self._closedAndReading = {} self._closedAndNotReading = WeakKeyDictionary() posixbase.PosixReactorBase.__init__(self) def _makeSocketEvent(self, fd, action, why): """ Make a win32 event object for a socket. """ event = CreateEvent(None, 0, 0, None) WSAEventSelect(fd, event, why) self._events[event] = (fd, action) return event def addEvent(self, event, fd, action): """ Add a new win32 event to the event loop. """ self._events[event] = (fd, action) def removeEvent(self, event): """ Remove an event. """ del self._events[event] def addReader(self, reader): """ Add a socket FileDescriptor for notification of data available to read. """ if reader not in self._reads: self._reads[reader] = self._makeSocketEvent( reader, "doRead", FD_READ | FD_ACCEPT | FD_CONNECT | FD_CLOSE ) # If the reader is closed, move it over to the dictionary of reading # descriptors. if reader in self._closedAndNotReading: self._closedAndReading[reader] = True del self._closedAndNotReading[reader] def addWriter(self, writer): """ Add a socket FileDescriptor for notification of data available to write. """ if writer not in self._writes: self._writes[writer] = 1 def removeReader(self, reader): """Remove a Selectable for notification of data available to read.""" if reader in self._reads: del self._events[self._reads[reader]] del self._reads[reader] # If the descriptor is closed, move it out of the dictionary of # reading descriptors into the dictionary of waiting descriptors. if reader in self._closedAndReading: self._closedAndNotReading[reader] = True del self._closedAndReading[reader] def removeWriter(self, writer): """Remove a Selectable for notification of data available to write.""" if writer in self._writes: del self._writes[writer] def removeAll(self): """ Remove all selectables, and return a list of them. """ return self._removeAll(self._reads, self._writes) def getReaders(self): return list(self._reads.keys()) def getWriters(self): return list(self._writes.keys()) def doWaitForMultipleEvents(self, timeout): log.msg(channel="system", event="iteration", reactor=self) if timeout is None: timeout = 100 # Keep track of whether we run any application code before we get to the # MsgWaitForMultipleObjects. If so, there's a chance it will schedule a # new timed call or stop the reactor or do something else that means we # shouldn't block in MsgWaitForMultipleObjects for the full timeout. ranUserCode = False # If any descriptors are trying to close, try to get them out of the way # first. for reader in list(self._closedAndReading.keys()): ranUserCode = True self._runAction("doRead", reader) for fd in list(self._writes.keys()): ranUserCode = True log.callWithLogger(fd, self._runWrite, fd) if ranUserCode: # If application code *might* have scheduled an event, assume it # did. If we're wrong, we'll get back here shortly anyway. If # we're right, we'll be sure to handle the event (including reactor # shutdown) in a timely manner. timeout = 0 if not (self._events or self._writes): # sleep so we don't suck up CPU time time.sleep(timeout) return handles = list(self._events.keys()) or [self.dummyEvent] timeout = int(timeout * 1000) val = MsgWaitForMultipleObjects(handles, 0, timeout, QS_ALLINPUT) if val == WAIT_TIMEOUT: return elif val == WAIT_OBJECT_0 + len(handles): exit = win32gui.PumpWaitingMessages() if exit: self.callLater(0, self.stop) return elif val >= WAIT_OBJECT_0 and val < WAIT_OBJECT_0 + len(handles): event = handles[val - WAIT_OBJECT_0] fd, action = self._events[event] if fd in self._reads: # Before anything, make sure it's still a valid file descriptor. fileno = fd.fileno() if fileno == -1: self._disconnectSelectable(fd, posixbase._NO_FILEDESC, False) return # Since it's a socket (not another arbitrary event added via # addEvent) and we asked for FD_READ | FD_CLOSE, check to see if # we actually got FD_CLOSE. This needs a special check because # it only gets delivered once. If we miss it, it's gone forever # and we'll never know that the connection is closed. events = WSAEnumNetworkEvents(fileno, event) if FD_CLOSE in events: self._closedAndReading[fd] = True log.callWithLogger(fd, self._runAction, action, fd) def _runWrite(self, fd): closed = 0 try: closed = fd.doWrite() except BaseException: closed = sys.exc_info()[1] log.deferr() if closed: self.removeReader(fd) self.removeWriter(fd) try: fd.connectionLost(failure.Failure(closed)) except BaseException: log.deferr() elif closed is None: return 1 def _runAction(self, action, fd): try: closed = getattr(fd, action)() except BaseException: closed = sys.exc_info()[1] log.deferr() if closed: self._disconnectSelectable(fd, closed, action == "doRead") doIteration = doWaitForMultipleEvents class _ThreadFDWrapper: """ This wraps an event handler and translates notification in the helper L{Win32Reactor} thread into a notification in the primary reactor thread. @ivar _reactor: The primary reactor, the one to which event notification will be sent. @ivar _fd: The L{FileDescriptor} to which the event will be dispatched. @ivar _action: A C{str} giving the method of C{_fd} which handles the event. @ivar _logPrefix: The pre-fetched log prefix string for C{_fd}, so that C{_fd.logPrefix} does not need to be called in a non-main thread. """ def __init__(self, reactor, fd, action, logPrefix): self._reactor = reactor self._fd = fd self._action = action self._logPrefix = logPrefix def logPrefix(self): """ Return the original handler's log prefix, as it was given to C{__init__}. """ return self._logPrefix def _execute(self): """ Callback fired when the associated event is set. Run the C{action} callback on the wrapped descriptor in the main reactor thread and raise or return whatever it raises or returns to cause this event handler to be removed from C{self._reactor} if appropriate. """ return blockingCallFromThread( self._reactor, lambda: getattr(self._fd, self._action)() ) def connectionLost(self, reason): """ Pass through to the wrapped descriptor, but in the main reactor thread instead of the helper C{Win32Reactor} thread. """ self._reactor.callFromThread(self._fd.connectionLost, reason) @implementer(IReactorWin32Events) class _ThreadedWin32EventsMixin: """ This mixin implements L{IReactorWin32Events} for another reactor by running a L{Win32Reactor} in a separate thread and dispatching work to it. @ivar _reactor: The L{Win32Reactor} running in the other thread. This is L{None} until it is actually needed. @ivar _reactorThread: The L{threading.Thread} which is running the L{Win32Reactor}. This is L{None} until it is actually needed. """ _reactor = None _reactorThread = None def _unmakeHelperReactor(self): """ Stop and discard the reactor started by C{_makeHelperReactor}. """ self._reactor.callFromThread(self._reactor.stop) self._reactor = None def _makeHelperReactor(self): """ Create and (in a new thread) start a L{Win32Reactor} instance to use for the implementation of L{IReactorWin32Events}. """ self._reactor = Win32Reactor() # This is a helper reactor, it is not the global reactor and its thread # is not "the" I/O thread. Prevent it from registering it as such. self._reactor._registerAsIOThread = False self._reactorThread = Thread(target=self._reactor.run, args=(False,)) self.addSystemEventTrigger("after", "shutdown", self._unmakeHelperReactor) self._reactorThread.start() def addEvent(self, event, fd, action): """ @see: L{IReactorWin32Events} """ if self._reactor is None: self._makeHelperReactor() self._reactor.callFromThread( self._reactor.addEvent, event, _ThreadFDWrapper(self, fd, action, fd.logPrefix()), "_execute", ) def removeEvent(self, event): """ @see: L{IReactorWin32Events} """ self._reactor.callFromThread(self._reactor.removeEvent, event) def install(): threadable.init(1) r = Win32Reactor() from . import main main.installReactor(r) __all__ = ["Win32Reactor", "install"]