// © 2016 and later: Unicode, Inc. and others. // License & terms of use: http://www.unicode.org/copyright.html /* ------------------------------------------------------------------ */ /* Decimal Context module header */ /* ------------------------------------------------------------------ */ /* Copyright (c) IBM Corporation, 2000-2011. All rights reserved. */ /* */ /* This software is made available under the terms of the */ /* ICU License -- ICU 1.8.1 and later. */ /* */ /* The description and User's Guide ("The decNumber C Library") for */ /* this software is called decNumber.pdf. This document is */ /* available, together with arithmetic and format specifications, */ /* testcases, and Web links, on the General Decimal Arithmetic page. */ /* */ /* Please send comments, suggestions, and corrections to the author: */ /* mfc@uk.ibm.com */ /* Mike Cowlishaw, IBM Fellow */ /* IBM UK, PO Box 31, Birmingham Road, Warwick CV34 5JL, UK */ /* ------------------------------------------------------------------ */ /* Modified version, for use from within ICU. * Renamed public functions, to avoid an unwanted export of the * standard names from the ICU library. * * Use ICU's uprv_malloc() and uprv_free() * * Revert comment syntax to plain C * * Remove a few compiler warnings. */ #include "unicode/utypes.h" #include "putilimp.h" /* */ /* Context variables must always have valid values: */ /* */ /* status -- [any bits may be cleared, but not set, by user] */ /* round -- must be one of the enumerated rounding modes */ /* */ /* The following variables are implied for fixed size formats (i.e., */ /* they are ignored) but should still be set correctly in case used */ /* with decNumber functions: */ /* */ /* clamp -- must be either 0 or 1 */ /* digits -- must be in the range 1 through 999999999 */ /* emax -- must be in the range 0 through 999999999 */ /* emin -- must be in the range 0 through -999999999 */ /* extended -- must be either 0 or 1 [present only if DECSUBSET] */ /* traps -- only defined bits may be set */ /* */ /* ------------------------------------------------------------------ */ #if !defined(DECCONTEXT) #define DECCONTEXT #define DECCNAME "decContext" /* Short name */ #define DECCFULLNAME "Decimal Context Descriptor" /* Verbose name */ #define DECCAUTHOR "Mike Cowlishaw" /* Who to blame */ #if !defined(int32_t) /* #include */ /* C99 standard integers */ #endif #include /* for printf, etc. */ #include /* for traps */ /* Extended flags setting -- set this to 0 to use only IEEE flags */ #if !defined(DECEXTFLAG) #define DECEXTFLAG 1 /* 1=enable extended flags */ #endif /* Conditional code flag -- set this to 0 for best performance */ #if !defined(DECSUBSET) #define DECSUBSET 0 /* 1=enable subset arithmetic */ #endif /* Context for operations, with associated constants */ enum rounding { DEC_ROUND_CEILING, /* round towards +infinity */ DEC_ROUND_UP, /* round away from 0 */ DEC_ROUND_HALF_UP, /* 0.5 rounds up */ DEC_ROUND_HALF_EVEN, /* 0.5 rounds to nearest even */ DEC_ROUND_HALF_DOWN, /* 0.5 rounds down */ DEC_ROUND_DOWN, /* round towards 0 (truncate) */ DEC_ROUND_FLOOR, /* round towards -infinity */ DEC_ROUND_05UP, /* round for reround */ DEC_ROUND_MAX /* enum must be less than this */ }; #define DEC_ROUND_DEFAULT DEC_ROUND_HALF_EVEN; typedef struct { int32_t digits; /* working precision */ int32_t emax; /* maximum positive exponent */ int32_t emin; /* minimum negative exponent */ enum rounding round; /* rounding mode */ uint32_t traps; /* trap-enabler flags */ uint32_t status; /* status flags */ uint8_t clamp; /* flag: apply IEEE exponent clamp */ #if DECSUBSET uint8_t extended; /* flag: special-values allowed */ #endif } decContext; /* Maxima and Minima for context settings */ #define DEC_MAX_DIGITS 999999999 #define DEC_MIN_DIGITS 1 #define DEC_MAX_EMAX 999999999 #define DEC_MIN_EMAX 0 #define DEC_MAX_EMIN 0 #define DEC_MIN_EMIN -999999999 #define DEC_MAX_MATH 999999 /* max emax, etc., for math funcs. */ /* Classifications for decimal numbers, aligned with 754 (note that */ /* 'normal' and 'subnormal' are meaningful only with a decContext */ /* or a fixed size format). */ enum decClass { DEC_CLASS_SNAN, DEC_CLASS_QNAN, DEC_CLASS_NEG_INF, DEC_CLASS_NEG_NORMAL, DEC_CLASS_NEG_SUBNORMAL, DEC_CLASS_NEG_ZERO, DEC_CLASS_POS_ZERO, DEC_CLASS_POS_SUBNORMAL, DEC_CLASS_POS_NORMAL, DEC_CLASS_POS_INF }; /* Strings for the decClasses */ #define DEC_ClassString_SN "sNaN" #define DEC_ClassString_QN "NaN" #define DEC_ClassString_NI "-Infinity" #define DEC_ClassString_NN "-Normal" #define DEC_ClassString_NS "-Subnormal" #define DEC_ClassString_NZ "-Zero" #define DEC_ClassString_PZ "+Zero" #define DEC_ClassString_PS "+Subnormal" #define DEC_ClassString_PN "+Normal" #define DEC_ClassString_PI "+Infinity" #define DEC_ClassString_UN "Invalid" /* Trap-enabler and Status flags (exceptional conditions), and */ /* their names. The top byte is reserved for internal use */ #if DECEXTFLAG /* Extended flags */ #define DEC_Conversion_syntax 0x00000001 #define DEC_Division_by_zero 0x00000002 #define DEC_Division_impossible 0x00000004 #define DEC_Division_undefined 0x00000008 #define DEC_Insufficient_storage 0x00000010 /* [when malloc fails] */ #define DEC_Inexact 0x00000020 #define DEC_Invalid_context 0x00000040 #define DEC_Invalid_operation 0x00000080 #if DECSUBSET #define DEC_Lost_digits 0x00000100 #endif #define DEC_Overflow 0x00000200 #define DEC_Clamped 0x00000400 #define DEC_Rounded 0x00000800 #define DEC_Subnormal 0x00001000 #define DEC_Underflow 0x00002000 #else /* IEEE flags only */ #define DEC_Conversion_syntax 0x00000010 #define DEC_Division_by_zero 0x00000002 #define DEC_Division_impossible 0x00000010 #define DEC_Division_undefined 0x00000010 #define DEC_Insufficient_storage 0x00000010 /* [when malloc fails] */ #define DEC_Inexact 0x00000001 #define DEC_Invalid_context 0x00000010 #define DEC_Invalid_operation 0x00000010 #if DECSUBSET #define DEC_Lost_digits 0x00000000 #endif #define DEC_Overflow 0x00000008 #define DEC_Clamped 0x00000000 #define DEC_Rounded 0x00000000 #define DEC_Subnormal 0x00000000 #define DEC_Underflow 0x00000004 #endif /* IEEE 754 groupings for the flags */ /* [DEC_Clamped, DEC_Lost_digits, DEC_Rounded, and DEC_Subnormal */ /* are not in IEEE 754] */ #define DEC_IEEE_754_Division_by_zero (DEC_Division_by_zero) #if DECSUBSET #define DEC_IEEE_754_Inexact (DEC_Inexact | DEC_Lost_digits) #else #define DEC_IEEE_754_Inexact (DEC_Inexact) #endif #define DEC_IEEE_754_Invalid_operation (DEC_Conversion_syntax | \ DEC_Division_impossible | \ DEC_Division_undefined | \ DEC_Insufficient_storage | \ DEC_Invalid_context | \ DEC_Invalid_operation) #define DEC_IEEE_754_Overflow (DEC_Overflow) #define DEC_IEEE_754_Underflow (DEC_Underflow) /* flags which are normally errors (result is qNaN, infinite, or 0) */ #define DEC_Errors (DEC_IEEE_754_Division_by_zero | \ DEC_IEEE_754_Invalid_operation | \ DEC_IEEE_754_Overflow | DEC_IEEE_754_Underflow) /* flags which cause a result to become qNaN */ #define DEC_NaNs DEC_IEEE_754_Invalid_operation /* flags which are normally for information only (finite results) */ #if DECSUBSET #define DEC_Information (DEC_Clamped | DEC_Rounded | DEC_Inexact \ | DEC_Lost_digits) #else #define DEC_Information (DEC_Clamped | DEC_Rounded | DEC_Inexact) #endif /* IEEE 854 names (for compatibility with older decNumber versions) */ #define DEC_IEEE_854_Division_by_zero DEC_IEEE_754_Division_by_zero #define DEC_IEEE_854_Inexact DEC_IEEE_754_Inexact #define DEC_IEEE_854_Invalid_operation DEC_IEEE_754_Invalid_operation #define DEC_IEEE_854_Overflow DEC_IEEE_754_Overflow #define DEC_IEEE_854_Underflow DEC_IEEE_754_Underflow /* Name strings for the exceptional conditions */ #define DEC_Condition_CS "Conversion syntax" #define DEC_Condition_DZ "Division by zero" #define DEC_Condition_DI "Division impossible" #define DEC_Condition_DU "Division undefined" #define DEC_Condition_IE "Inexact" #define DEC_Condition_IS "Insufficient storage" #define DEC_Condition_IC "Invalid context" #define DEC_Condition_IO "Invalid operation" #if DECSUBSET #define DEC_Condition_LD "Lost digits" #endif #define DEC_Condition_OV "Overflow" #define DEC_Condition_PA "Clamped" #define DEC_Condition_RO "Rounded" #define DEC_Condition_SU "Subnormal" #define DEC_Condition_UN "Underflow" #define DEC_Condition_ZE "No status" #define DEC_Condition_MU "Multiple status" #define DEC_Condition_Length 21 /* length of the longest string, */ /* including terminator */ /* Initialization descriptors, used by decContextDefault */ #define DEC_INIT_BASE 0 #define DEC_INIT_DECIMAL32 32 #define DEC_INIT_DECIMAL64 64 #define DEC_INIT_DECIMAL128 128 /* Synonyms */ #define DEC_INIT_DECSINGLE DEC_INIT_DECIMAL32 #define DEC_INIT_DECDOUBLE DEC_INIT_DECIMAL64 #define DEC_INIT_DECQUAD DEC_INIT_DECIMAL128 /* decContext routines */ U_CAPI decContext * U_EXPORT2 uprv_decContextClearStatus(decContext *, uint32_t); U_CAPI decContext * U_EXPORT2 uprv_decContextDefault(decContext *, int32_t); U_CAPI enum rounding U_EXPORT2 uprv_decContextGetRounding(decContext *); U_CAPI uint32_t U_EXPORT2 uprv_decContextGetStatus(decContext *); U_CAPI decContext * U_EXPORT2 uprv_decContextRestoreStatus(decContext *, uint32_t, uint32_t); U_CAPI uint32_t U_EXPORT2 uprv_decContextSaveStatus(decContext *, uint32_t); U_CAPI decContext * U_EXPORT2 uprv_decContextSetRounding(decContext *, enum rounding); U_CAPI decContext * U_EXPORT2 uprv_decContextSetStatus(decContext *, uint32_t); U_CAPI decContext * U_EXPORT2 uprv_decContextSetStatusFromString(decContext *, const char *); U_CAPI decContext * U_EXPORT2 uprv_decContextSetStatusFromStringQuiet(decContext *, const char *); U_CAPI decContext * U_EXPORT2 uprv_decContextSetStatusQuiet(decContext *, uint32_t); U_CAPI const char * U_EXPORT2 uprv_decContextStatusToString(const decContext *); U_CAPI uint32_t U_EXPORT2 uprv_decContextTestSavedStatus(uint32_t, uint32_t); U_CAPI uint32_t U_EXPORT2 uprv_decContextTestStatus(decContext *, uint32_t); U_CAPI decContext * U_EXPORT2 uprv_decContextZeroStatus(decContext *); #endif