//===-- ARMUnwindOpAsm.cpp - ARM Unwind Opcodes Assembler -------*- C++ -*-===// // // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. // See https://llvm.org/LICENSE.txt for license information. // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception // //===----------------------------------------------------------------------===// // // This file implements the unwind opcode assembler for ARM exception handling // table. // //===----------------------------------------------------------------------===// #include "ARMUnwindOpAsm.h" #include "llvm/Support/ARMEHABI.h" #include "llvm/Support/LEB128.h" #include "llvm/Support/MathExtras.h" #include using namespace llvm; namespace { /// UnwindOpcodeStreamer - The simple wrapper over SmallVector to emit bytes /// with MSB to LSB per uint32_t ordering. For example, the first byte will /// be placed in Vec[3], and the following bytes will be placed in 2, 1, 0, /// 7, 6, 5, 4, 11, 10, 9, 8, and so on. class UnwindOpcodeStreamer { private: SmallVectorImpl &Vec; size_t Pos = 3; public: UnwindOpcodeStreamer(SmallVectorImpl &V) : Vec(V) {} /// Emit the byte in MSB to LSB per uint32_t order. void EmitByte(uint8_t elem) { Vec[Pos] = elem; Pos = (((Pos ^ 0x3u) + 1) ^ 0x3u); } /// Emit the size prefix. void EmitSize(size_t Size) { size_t SizeInWords = (Size + 3) / 4; assert(SizeInWords <= 0x100u && "Only 256 additional words are allowed for unwind opcodes"); EmitByte(static_cast(SizeInWords - 1)); } /// Emit the personality index prefix. void EmitPersonalityIndex(unsigned PI) { assert(PI < ARM::EHABI::NUM_PERSONALITY_INDEX && "Invalid personality prefix"); EmitByte(ARM::EHABI::EHT_COMPACT | PI); } /// Fill the rest of bytes with FINISH opcode. void FillFinishOpcode() { while (Pos < Vec.size()) EmitByte(ARM::EHABI::UNWIND_OPCODE_FINISH); } }; } // end anonymous namespace void UnwindOpcodeAssembler::EmitRegSave(uint32_t RegSave) { if (RegSave == 0u) { // That's the special case for RA PAC. EmitInt8(ARM::EHABI::UNWIND_OPCODE_POP_RA_AUTH_CODE); return; } // One byte opcode to save register r14 and r11-r4 if (RegSave & (1u << 4)) { // The one byte opcode will always save r4, thus we can't use the one byte // opcode when r4 is not in .save directive. // Compute the consecutive registers from r4 to r11. uint32_t Mask = RegSave & 0xff0u; uint32_t Range = countTrailingOnes(Mask >> 5); // Exclude r4. // Mask off non-consecutive registers. Keep r4. Mask &= ~(0xffffffe0u << Range); // Emit this opcode when the mask covers every registers. uint32_t UnmaskedReg = RegSave & 0xfff0u & (~Mask); if (UnmaskedReg == 0u) { // Pop r[4 : (4 + n)] EmitInt8(ARM::EHABI::UNWIND_OPCODE_POP_REG_RANGE_R4 | Range); RegSave &= 0x000fu; } else if (UnmaskedReg == (1u << 14)) { // Pop r[14] + r[4 : (4 + n)] EmitInt8(ARM::EHABI::UNWIND_OPCODE_POP_REG_RANGE_R4_R14 | Range); RegSave &= 0x000fu; } } // Two bytes opcode to save register r15-r4 if ((RegSave & 0xfff0u) != 0) EmitInt16(ARM::EHABI::UNWIND_OPCODE_POP_REG_MASK_R4 | (RegSave >> 4)); // Opcode to save register r3-r0 if ((RegSave & 0x000fu) != 0) EmitInt16(ARM::EHABI::UNWIND_OPCODE_POP_REG_MASK | (RegSave & 0x000fu)); } /// Emit unwind opcodes for .vsave directives void UnwindOpcodeAssembler::EmitVFPRegSave(uint32_t VFPRegSave) { // We only have 4 bits to save the offset in the opcode so look at the lower // and upper 16 bits separately. for (uint32_t Regs : {VFPRegSave & 0xffff0000u, VFPRegSave & 0x0000ffffu}) { while (Regs) { // Now look for a run of set bits. Remember the MSB and LSB of the run. auto RangeMSB = 32 - countLeadingZeros(Regs); auto RangeLen = countLeadingOnes(Regs << (32 - RangeMSB)); auto RangeLSB = RangeMSB - RangeLen; int Opcode = RangeLSB >= 16 ? ARM::EHABI::UNWIND_OPCODE_POP_VFP_REG_RANGE_FSTMFDD_D16 : ARM::EHABI::UNWIND_OPCODE_POP_VFP_REG_RANGE_FSTMFDD; EmitInt16(Opcode | ((RangeLSB % 16) << 4) | (RangeLen - 1)); // Zero out bits we're done with. Regs &= ~(-1u << RangeLSB); } } } /// Emit unwind opcodes to copy address from source register to $sp. void UnwindOpcodeAssembler::EmitSetSP(uint16_t Reg) { EmitInt8(ARM::EHABI::UNWIND_OPCODE_SET_VSP | Reg); } /// Emit unwind opcodes to add $sp with an offset. void UnwindOpcodeAssembler::EmitSPOffset(int64_t Offset) { if (Offset > 0x200) { uint8_t Buff[16]; Buff[0] = ARM::EHABI::UNWIND_OPCODE_INC_VSP_ULEB128; size_t ULEBSize = encodeULEB128((Offset - 0x204) >> 2, Buff + 1); emitBytes(Buff, ULEBSize + 1); } else if (Offset > 0) { if (Offset > 0x100) { EmitInt8(ARM::EHABI::UNWIND_OPCODE_INC_VSP | 0x3fu); Offset -= 0x100; } EmitInt8(ARM::EHABI::UNWIND_OPCODE_INC_VSP | static_cast((Offset - 4) >> 2)); } else if (Offset < 0) { while (Offset < -0x100) { EmitInt8(ARM::EHABI::UNWIND_OPCODE_DEC_VSP | 0x3fu); Offset += 0x100; } EmitInt8(ARM::EHABI::UNWIND_OPCODE_DEC_VSP | static_cast(((-Offset) - 4) >> 2)); } } void UnwindOpcodeAssembler::Finalize(unsigned &PersonalityIndex, SmallVectorImpl &Result) { UnwindOpcodeStreamer OpStreamer(Result); if (HasPersonality) { // User-specifed personality routine: [ SIZE , OP1 , OP2 , ... ] PersonalityIndex = ARM::EHABI::NUM_PERSONALITY_INDEX; size_t TotalSize = Ops.size() + 1; size_t RoundUpSize = (TotalSize + 3) / 4 * 4; Result.resize(RoundUpSize); OpStreamer.EmitSize(RoundUpSize); } else { // If no personalityindex is specified, select ane if (PersonalityIndex == ARM::EHABI::NUM_PERSONALITY_INDEX) PersonalityIndex = (Ops.size() <= 3) ? ARM::EHABI::AEABI_UNWIND_CPP_PR0 : ARM::EHABI::AEABI_UNWIND_CPP_PR1; if (PersonalityIndex == ARM::EHABI::AEABI_UNWIND_CPP_PR0) { // __aeabi_unwind_cpp_pr0: [ 0x80 , OP1 , OP2 , OP3 ] assert(Ops.size() <= 3 && "too many opcodes for __aeabi_unwind_cpp_pr0"); Result.resize(4); OpStreamer.EmitPersonalityIndex(PersonalityIndex); } else { // __aeabi_unwind_cpp_pr{1,2}: [ {0x81,0x82} , SIZE , OP1 , OP2 , ... ] size_t TotalSize = Ops.size() + 2; size_t RoundUpSize = (TotalSize + 3) / 4 * 4; Result.resize(RoundUpSize); OpStreamer.EmitPersonalityIndex(PersonalityIndex); OpStreamer.EmitSize(RoundUpSize); } } // Copy the unwind opcodes for (size_t i = OpBegins.size() - 1; i > 0; --i) for (size_t j = OpBegins[i - 1], end = OpBegins[i]; j < end; ++j) OpStreamer.EmitByte(Ops[j]); // Emit the padding finish opcodes if the size is not multiple of 4. OpStreamer.FillFinishOpcode(); // Reset the assembler state Reset(); }