//===-- X86ISelLowering.h - X86 DAG Lowering Interface ----------*- C++ -*-===// // // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. // See https://llvm.org/LICENSE.txt for license information. // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception // //===----------------------------------------------------------------------===// // // This file defines the interfaces that X86 uses to lower LLVM code into a // selection DAG. // //===----------------------------------------------------------------------===// #ifndef LLVM_LIB_TARGET_X86_X86ISELLOWERING_H #define LLVM_LIB_TARGET_X86_X86ISELLOWERING_H #include "llvm/CodeGen/MachineFunction.h" #include "llvm/CodeGen/TargetLowering.h" namespace llvm { class X86Subtarget; class X86TargetMachine; namespace X86ISD { // X86 Specific DAG Nodes enum NodeType : unsigned { // Start the numbering where the builtin ops leave off. FIRST_NUMBER = ISD::BUILTIN_OP_END, /// Bit scan forward. BSF, /// Bit scan reverse. BSR, /// X86 funnel/double shift i16 instructions. These correspond to /// X86::SHLDW and X86::SHRDW instructions which have different amt /// modulo rules to generic funnel shifts. /// NOTE: The operand order matches ISD::FSHL/FSHR not SHLD/SHRD. FSHL, FSHR, /// Bitwise logical AND of floating point values. This corresponds /// to X86::ANDPS or X86::ANDPD. FAND, /// Bitwise logical OR of floating point values. This corresponds /// to X86::ORPS or X86::ORPD. FOR, /// Bitwise logical XOR of floating point values. This corresponds /// to X86::XORPS or X86::XORPD. FXOR, /// Bitwise logical ANDNOT of floating point values. This /// corresponds to X86::ANDNPS or X86::ANDNPD. FANDN, /// These operations represent an abstract X86 call /// instruction, which includes a bunch of information. In particular the /// operands of these node are: /// /// #0 - The incoming token chain /// #1 - The callee /// #2 - The number of arg bytes the caller pushes on the stack. /// #3 - The number of arg bytes the callee pops off the stack. /// #4 - The value to pass in AL/AX/EAX (optional) /// #5 - The value to pass in DL/DX/EDX (optional) /// /// The result values of these nodes are: /// /// #0 - The outgoing token chain /// #1 - The first register result value (optional) /// #2 - The second register result value (optional) /// CALL, /// Same as call except it adds the NoTrack prefix. NT_CALL, // Pseudo for a OBJC call that gets emitted together with a special // marker instruction. CALL_RVMARKER, /// X86 compare and logical compare instructions. CMP, FCMP, COMI, UCOMI, /// X86 bit-test instructions. BT, /// X86 SetCC. Operand 0 is condition code, and operand 1 is the EFLAGS /// operand, usually produced by a CMP instruction. SETCC, /// X86 Select SELECTS, // Same as SETCC except it's materialized with a sbb and the value is all // one's or all zero's. SETCC_CARRY, // R = carry_bit ? ~0 : 0 /// X86 FP SETCC, implemented with CMP{cc}SS/CMP{cc}SD. /// Operands are two FP values to compare; result is a mask of /// 0s or 1s. Generally DTRT for C/C++ with NaNs. FSETCC, /// X86 FP SETCC, similar to above, but with output as an i1 mask and /// and a version with SAE. FSETCCM, FSETCCM_SAE, /// X86 conditional moves. Operand 0 and operand 1 are the two values /// to select from. Operand 2 is the condition code, and operand 3 is the /// flag operand produced by a CMP or TEST instruction. CMOV, /// X86 conditional branches. Operand 0 is the chain operand, operand 1 /// is the block to branch if condition is true, operand 2 is the /// condition code, and operand 3 is the flag operand produced by a CMP /// or TEST instruction. BRCOND, /// BRIND node with NoTrack prefix. Operand 0 is the chain operand and /// operand 1 is the target address. NT_BRIND, /// Return with a flag operand. Operand 0 is the chain operand, operand /// 1 is the number of bytes of stack to pop. RET_FLAG, /// Return from interrupt. Operand 0 is the number of bytes to pop. IRET, /// Repeat fill, corresponds to X86::REP_STOSx. REP_STOS, /// Repeat move, corresponds to X86::REP_MOVSx. REP_MOVS, /// On Darwin, this node represents the result of the popl /// at function entry, used for PIC code. GlobalBaseReg, /// A wrapper node for TargetConstantPool, TargetJumpTable, /// TargetExternalSymbol, TargetGlobalAddress, TargetGlobalTLSAddress, /// MCSymbol and TargetBlockAddress. Wrapper, /// Special wrapper used under X86-64 PIC mode for RIP /// relative displacements. WrapperRIP, /// Copies a 64-bit value from an MMX vector to the low word /// of an XMM vector, with the high word zero filled. MOVQ2DQ, /// Copies a 64-bit value from the low word of an XMM vector /// to an MMX vector. MOVDQ2Q, /// Copies a 32-bit value from the low word of a MMX /// vector to a GPR. MMX_MOVD2W, /// Copies a GPR into the low 32-bit word of a MMX vector /// and zero out the high word. MMX_MOVW2D, /// Extract an 8-bit value from a vector and zero extend it to /// i32, corresponds to X86::PEXTRB. PEXTRB, /// Extract a 16-bit value from a vector and zero extend it to /// i32, corresponds to X86::PEXTRW. PEXTRW, /// Insert any element of a 4 x float vector into any element /// of a destination 4 x floatvector. INSERTPS, /// Insert the lower 8-bits of a 32-bit value to a vector, /// corresponds to X86::PINSRB. PINSRB, /// Insert the lower 16-bits of a 32-bit value to a vector, /// corresponds to X86::PINSRW. PINSRW, /// Shuffle 16 8-bit values within a vector. PSHUFB, /// Compute Sum of Absolute Differences. PSADBW, /// Compute Double Block Packed Sum-Absolute-Differences DBPSADBW, /// Bitwise Logical AND NOT of Packed FP values. ANDNP, /// Blend where the selector is an immediate. BLENDI, /// Dynamic (non-constant condition) vector blend where only the sign bits /// of the condition elements are used. This is used to enforce that the /// condition mask is not valid for generic VSELECT optimizations. This /// is also used to implement the intrinsics. /// Operands are in VSELECT order: MASK, TRUE, FALSE BLENDV, /// Combined add and sub on an FP vector. ADDSUB, // FP vector ops with rounding mode. FADD_RND, FADDS, FADDS_RND, FSUB_RND, FSUBS, FSUBS_RND, FMUL_RND, FMULS, FMULS_RND, FDIV_RND, FDIVS, FDIVS_RND, FMAX_SAE, FMAXS_SAE, FMIN_SAE, FMINS_SAE, FSQRT_RND, FSQRTS, FSQRTS_RND, // FP vector get exponent. FGETEXP, FGETEXP_SAE, FGETEXPS, FGETEXPS_SAE, // Extract Normalized Mantissas. VGETMANT, VGETMANT_SAE, VGETMANTS, VGETMANTS_SAE, // FP Scale. SCALEF, SCALEF_RND, SCALEFS, SCALEFS_RND, // Unsigned Integer average. AVG, /// Integer horizontal add/sub. HADD, HSUB, /// Floating point horizontal add/sub. FHADD, FHSUB, // Detect Conflicts Within a Vector CONFLICT, /// Floating point max and min. FMAX, FMIN, /// Commutative FMIN and FMAX. FMAXC, FMINC, /// Scalar intrinsic floating point max and min. FMAXS, FMINS, /// Floating point reciprocal-sqrt and reciprocal approximation. /// Note that these typically require refinement /// in order to obtain suitable precision. FRSQRT, FRCP, // AVX-512 reciprocal approximations with a little more precision. RSQRT14, RSQRT14S, RCP14, RCP14S, // Thread Local Storage. TLSADDR, // Thread Local Storage. A call to get the start address // of the TLS block for the current module. TLSBASEADDR, // Thread Local Storage. When calling to an OS provided // thunk at the address from an earlier relocation. TLSCALL, // Exception Handling helpers. EH_RETURN, // SjLj exception handling setjmp. EH_SJLJ_SETJMP, // SjLj exception handling longjmp. EH_SJLJ_LONGJMP, // SjLj exception handling dispatch. EH_SJLJ_SETUP_DISPATCH, /// Tail call return. See X86TargetLowering::LowerCall for /// the list of operands. TC_RETURN, // Vector move to low scalar and zero higher vector elements. VZEXT_MOVL, // Vector integer truncate. VTRUNC, // Vector integer truncate with unsigned/signed saturation. VTRUNCUS, VTRUNCS, // Masked version of the above. Used when less than a 128-bit result is // produced since the mask only applies to the lower elements and can't // be represented by a select. // SRC, PASSTHRU, MASK VMTRUNC, VMTRUNCUS, VMTRUNCS, // Vector FP extend. VFPEXT, VFPEXT_SAE, VFPEXTS, VFPEXTS_SAE, // Vector FP round. VFPROUND, VFPROUND_RND, VFPROUNDS, VFPROUNDS_RND, // Masked version of above. Used for v2f64->v4f32. // SRC, PASSTHRU, MASK VMFPROUND, // 128-bit vector logical left / right shift VSHLDQ, VSRLDQ, // Vector shift elements VSHL, VSRL, VSRA, // Vector variable shift VSHLV, VSRLV, VSRAV, // Vector shift elements by immediate VSHLI, VSRLI, VSRAI, // Shifts of mask registers. KSHIFTL, KSHIFTR, // Bit rotate by immediate VROTLI, VROTRI, // Vector packed double/float comparison. CMPP, // Vector integer comparisons. PCMPEQ, PCMPGT, // v8i16 Horizontal minimum and position. PHMINPOS, MULTISHIFT, /// Vector comparison generating mask bits for fp and /// integer signed and unsigned data types. CMPM, // Vector mask comparison generating mask bits for FP values. CMPMM, // Vector mask comparison with SAE for FP values. CMPMM_SAE, // Arithmetic operations with FLAGS results. ADD, SUB, ADC, SBB, SMUL, UMUL, OR, XOR, AND, // Bit field extract. BEXTR, BEXTRI, // Zero High Bits Starting with Specified Bit Position. BZHI, // Parallel extract and deposit. PDEP, PEXT, // X86-specific multiply by immediate. MUL_IMM, // Vector sign bit extraction. MOVMSK, // Vector bitwise comparisons. PTEST, // Vector packed fp sign bitwise comparisons. TESTP, // OR/AND test for masks. KORTEST, KTEST, // ADD for masks. KADD, // Several flavors of instructions with vector shuffle behaviors. // Saturated signed/unnsigned packing. PACKSS, PACKUS, // Intra-lane alignr. PALIGNR, // AVX512 inter-lane alignr. VALIGN, PSHUFD, PSHUFHW, PSHUFLW, SHUFP, // VBMI2 Concat & Shift. VSHLD, VSHRD, VSHLDV, VSHRDV, // Shuffle Packed Values at 128-bit granularity. SHUF128, MOVDDUP, MOVSHDUP, MOVSLDUP, MOVLHPS, MOVHLPS, MOVSD, MOVSS, MOVSH, UNPCKL, UNPCKH, VPERMILPV, VPERMILPI, VPERMI, VPERM2X128, // Variable Permute (VPERM). // Res = VPERMV MaskV, V0 VPERMV, // 3-op Variable Permute (VPERMT2). // Res = VPERMV3 V0, MaskV, V1 VPERMV3, // Bitwise ternary logic. VPTERNLOG, // Fix Up Special Packed Float32/64 values. VFIXUPIMM, VFIXUPIMM_SAE, VFIXUPIMMS, VFIXUPIMMS_SAE, // Range Restriction Calculation For Packed Pairs of Float32/64 values. VRANGE, VRANGE_SAE, VRANGES, VRANGES_SAE, // Reduce - Perform Reduction Transformation on scalar\packed FP. VREDUCE, VREDUCE_SAE, VREDUCES, VREDUCES_SAE, // RndScale - Round FP Values To Include A Given Number Of Fraction Bits. // Also used by the legacy (V)ROUND intrinsics where we mask out the // scaling part of the immediate. VRNDSCALE, VRNDSCALE_SAE, VRNDSCALES, VRNDSCALES_SAE, // Tests Types Of a FP Values for packed types. VFPCLASS, // Tests Types Of a FP Values for scalar types. VFPCLASSS, // Broadcast (splat) scalar or element 0 of a vector. If the operand is // a vector, this node may change the vector length as part of the splat. VBROADCAST, // Broadcast mask to vector. VBROADCASTM, /// SSE4A Extraction and Insertion. EXTRQI, INSERTQI, // XOP arithmetic/logical shifts. VPSHA, VPSHL, // XOP signed/unsigned integer comparisons. VPCOM, VPCOMU, // XOP packed permute bytes. VPPERM, // XOP two source permutation. VPERMIL2, // Vector multiply packed unsigned doubleword integers. PMULUDQ, // Vector multiply packed signed doubleword integers. PMULDQ, // Vector Multiply Packed UnsignedIntegers with Round and Scale. MULHRS, // Multiply and Add Packed Integers. VPMADDUBSW, VPMADDWD, // AVX512IFMA multiply and add. // NOTE: These are different than the instruction and perform // op0 x op1 + op2. VPMADD52L, VPMADD52H, // VNNI VPDPBUSD, VPDPBUSDS, VPDPWSSD, VPDPWSSDS, // FMA nodes. // We use the target independent ISD::FMA for the non-inverted case. FNMADD, FMSUB, FNMSUB, FMADDSUB, FMSUBADD, // FMA with rounding mode. FMADD_RND, FNMADD_RND, FMSUB_RND, FNMSUB_RND, FMADDSUB_RND, FMSUBADD_RND, // AVX512-FP16 complex addition and multiplication. VFMADDC, VFMADDC_RND, VFCMADDC, VFCMADDC_RND, VFMULC, VFMULC_RND, VFCMULC, VFCMULC_RND, VFMADDCSH, VFMADDCSH_RND, VFCMADDCSH, VFCMADDCSH_RND, VFMULCSH, VFMULCSH_RND, VFCMULCSH, VFCMULCSH_RND, // Compress and expand. COMPRESS, EXPAND, // Bits shuffle VPSHUFBITQMB, // Convert Unsigned/Integer to Floating-Point Value with rounding mode. SINT_TO_FP_RND, UINT_TO_FP_RND, SCALAR_SINT_TO_FP, SCALAR_UINT_TO_FP, SCALAR_SINT_TO_FP_RND, SCALAR_UINT_TO_FP_RND, // Vector float/double to signed/unsigned integer. CVTP2SI, CVTP2UI, CVTP2SI_RND, CVTP2UI_RND, // Scalar float/double to signed/unsigned integer. CVTS2SI, CVTS2UI, CVTS2SI_RND, CVTS2UI_RND, // Vector float/double to signed/unsigned integer with truncation. CVTTP2SI, CVTTP2UI, CVTTP2SI_SAE, CVTTP2UI_SAE, // Scalar float/double to signed/unsigned integer with truncation. CVTTS2SI, CVTTS2UI, CVTTS2SI_SAE, CVTTS2UI_SAE, // Vector signed/unsigned integer to float/double. CVTSI2P, CVTUI2P, // Masked versions of above. Used for v2f64->v4f32. // SRC, PASSTHRU, MASK MCVTP2SI, MCVTP2UI, MCVTTP2SI, MCVTTP2UI, MCVTSI2P, MCVTUI2P, // Vector float to bfloat16. // Convert TWO packed single data to one packed BF16 data CVTNE2PS2BF16, // Convert packed single data to packed BF16 data CVTNEPS2BF16, // Masked version of above. // SRC, PASSTHRU, MASK MCVTNEPS2BF16, // Dot product of BF16 pairs to accumulated into // packed single precision. DPBF16PS, // A stack checking function call. On Windows it's _chkstk call. DYN_ALLOCA, // For allocating variable amounts of stack space when using // segmented stacks. Check if the current stacklet has enough space, and // falls back to heap allocation if not. SEG_ALLOCA, // For allocating stack space when using stack clash protector. // Allocation is performed by block, and each block is probed. PROBED_ALLOCA, // Memory barriers. MEMBARRIER, MFENCE, // Get a random integer and indicate whether it is valid in CF. RDRAND, // Get a NIST SP800-90B & C compliant random integer and // indicate whether it is valid in CF. RDSEED, // Protection keys // RDPKRU - Operand 0 is chain. Operand 1 is value for ECX. // WRPKRU - Operand 0 is chain. Operand 1 is value for EDX. Operand 2 is // value for ECX. RDPKRU, WRPKRU, // SSE42 string comparisons. // These nodes produce 3 results, index, mask, and flags. X86ISelDAGToDAG // will emit one or two instructions based on which results are used. If // flags and index/mask this allows us to use a single instruction since // we won't have to pick and opcode for flags. Instead we can rely on the // DAG to CSE everything and decide at isel. PCMPISTR, PCMPESTR, // Test if in transactional execution. XTEST, // ERI instructions. RSQRT28, RSQRT28_SAE, RSQRT28S, RSQRT28S_SAE, RCP28, RCP28_SAE, RCP28S, RCP28S_SAE, EXP2, EXP2_SAE, // Conversions between float and half-float. CVTPS2PH, CVTPH2PS, CVTPH2PS_SAE, // Masked version of above. // SRC, RND, PASSTHRU, MASK MCVTPS2PH, // Galois Field Arithmetic Instructions GF2P8AFFINEINVQB, GF2P8AFFINEQB, GF2P8MULB, // LWP insert record. LWPINS, // User level wait UMWAIT, TPAUSE, // Enqueue Stores Instructions ENQCMD, ENQCMDS, // For avx512-vp2intersect VP2INTERSECT, // User level interrupts - testui TESTUI, /// X86 strict FP compare instructions. STRICT_FCMP = ISD::FIRST_TARGET_STRICTFP_OPCODE, STRICT_FCMPS, // Vector packed double/float comparison. STRICT_CMPP, /// Vector comparison generating mask bits for fp and /// integer signed and unsigned data types. STRICT_CMPM, // Vector float/double to signed/unsigned integer with truncation. STRICT_CVTTP2SI, STRICT_CVTTP2UI, // Vector FP extend. STRICT_VFPEXT, // Vector FP round. STRICT_VFPROUND, // RndScale - Round FP Values To Include A Given Number Of Fraction Bits. // Also used by the legacy (V)ROUND intrinsics where we mask out the // scaling part of the immediate. STRICT_VRNDSCALE, // Vector signed/unsigned integer to float/double. STRICT_CVTSI2P, STRICT_CVTUI2P, // Strict FMA nodes. STRICT_FNMADD, STRICT_FMSUB, STRICT_FNMSUB, // Conversions between float and half-float. STRICT_CVTPS2PH, STRICT_CVTPH2PS, // WARNING: Only add nodes here if they are stric FP nodes. Non-memory and // non-strict FP nodes should be above FIRST_TARGET_STRICTFP_OPCODE. // Compare and swap. LCMPXCHG_DAG = ISD::FIRST_TARGET_MEMORY_OPCODE, LCMPXCHG8_DAG, LCMPXCHG16_DAG, LCMPXCHG16_SAVE_RBX_DAG, /// LOCK-prefixed arithmetic read-modify-write instructions. /// EFLAGS, OUTCHAIN = LADD(INCHAIN, PTR, RHS) LADD, LSUB, LOR, LXOR, LAND, // Load, scalar_to_vector, and zero extend. VZEXT_LOAD, // extract_vector_elt, store. VEXTRACT_STORE, // scalar broadcast from memory. VBROADCAST_LOAD, // subvector broadcast from memory. SUBV_BROADCAST_LOAD, // Store FP control word into i16 memory. FNSTCW16m, // Load FP control word from i16 memory. FLDCW16m, /// This instruction implements FP_TO_SINT with the /// integer destination in memory and a FP reg source. This corresponds /// to the X86::FIST*m instructions and the rounding mode change stuff. It /// has two inputs (token chain and address) and two outputs (int value /// and token chain). Memory VT specifies the type to store to. FP_TO_INT_IN_MEM, /// This instruction implements SINT_TO_FP with the /// integer source in memory and FP reg result. This corresponds to the /// X86::FILD*m instructions. It has two inputs (token chain and address) /// and two outputs (FP value and token chain). The integer source type is /// specified by the memory VT. FILD, /// This instruction implements a fp->int store from FP stack /// slots. This corresponds to the fist instruction. It takes a /// chain operand, value to store, address, and glue. The memory VT /// specifies the type to store as. FIST, /// This instruction implements an extending load to FP stack slots. /// This corresponds to the X86::FLD32m / X86::FLD64m. It takes a chain /// operand, and ptr to load from. The memory VT specifies the type to /// load from. FLD, /// This instruction implements a truncating store from FP stack /// slots. This corresponds to the X86::FST32m / X86::FST64m. It takes a /// chain operand, value to store, address, and glue. The memory VT /// specifies the type to store as. FST, /// These instructions grab the address of the next argument /// from a va_list. (reads and modifies the va_list in memory) VAARG_64, VAARG_X32, // Vector truncating store with unsigned/signed saturation VTRUNCSTOREUS, VTRUNCSTORES, // Vector truncating masked store with unsigned/signed saturation VMTRUNCSTOREUS, VMTRUNCSTORES, // X86 specific gather and scatter MGATHER, MSCATTER, // Key locker nodes that produce flags. AESENC128KL, AESDEC128KL, AESENC256KL, AESDEC256KL, AESENCWIDE128KL, AESDECWIDE128KL, AESENCWIDE256KL, AESDECWIDE256KL, // Save xmm argument registers to the stack, according to %al. An operator // is needed so that this can be expanded with control flow. VASTART_SAVE_XMM_REGS, // WARNING: Do not add anything in the end unless you want the node to // have memop! In fact, starting from FIRST_TARGET_MEMORY_OPCODE all // opcodes will be thought as target memory ops! }; } // end namespace X86ISD namespace X86 { /// Current rounding mode is represented in bits 11:10 of FPSR. These /// values are same as corresponding constants for rounding mode used /// in glibc. enum RoundingMode { rmToNearest = 0, // FE_TONEAREST rmDownward = 1 << 10, // FE_DOWNWARD rmUpward = 2 << 10, // FE_UPWARD rmTowardZero = 3 << 10, // FE_TOWARDZERO rmMask = 3 << 10 // Bit mask selecting rounding mode }; } /// Define some predicates that are used for node matching. namespace X86 { /// Returns true if Elt is a constant zero or floating point constant +0.0. bool isZeroNode(SDValue Elt); /// Returns true of the given offset can be /// fit into displacement field of the instruction. bool isOffsetSuitableForCodeModel(int64_t Offset, CodeModel::Model M, bool hasSymbolicDisplacement); /// Determines whether the callee is required to pop its /// own arguments. Callee pop is necessary to support tail calls. bool isCalleePop(CallingConv::ID CallingConv, bool is64Bit, bool IsVarArg, bool GuaranteeTCO); /// If Op is a constant whose elements are all the same constant or /// undefined, return true and return the constant value in \p SplatVal. /// If we have undef bits that don't cover an entire element, we treat these /// as zero if AllowPartialUndefs is set, else we fail and return false. bool isConstantSplat(SDValue Op, APInt &SplatVal, bool AllowPartialUndefs = true); /// Check if Op is a load operation that could be folded into some other x86 /// instruction as a memory operand. Example: vpaddd (%rdi), %xmm0, %xmm0. bool mayFoldLoad(SDValue Op, const X86Subtarget &Subtarget, bool AssumeSingleUse = false); /// Check if Op is a load operation that could be folded into a vector splat /// instruction as a memory operand. Example: vbroadcastss 16(%rdi), %xmm2. bool mayFoldLoadIntoBroadcastFromMem(SDValue Op, MVT EltVT, const X86Subtarget &Subtarget, bool AssumeSingleUse = false); /// Check if Op is a value that could be used to fold a store into some /// other x86 instruction as a memory operand. Ex: pextrb $0, %xmm0, (%rdi). bool mayFoldIntoStore(SDValue Op); /// Check if Op is an operation that could be folded into a zero extend x86 /// instruction. bool mayFoldIntoZeroExtend(SDValue Op); } // end namespace X86 //===--------------------------------------------------------------------===// // X86 Implementation of the TargetLowering interface class X86TargetLowering final : public TargetLowering { public: explicit X86TargetLowering(const X86TargetMachine &TM, const X86Subtarget &STI); unsigned getJumpTableEncoding() const override; bool useSoftFloat() const override; void markLibCallAttributes(MachineFunction *MF, unsigned CC, ArgListTy &Args) const override; MVT getScalarShiftAmountTy(const DataLayout &, EVT VT) const override { return MVT::i8; } const MCExpr * LowerCustomJumpTableEntry(const MachineJumpTableInfo *MJTI, const MachineBasicBlock *MBB, unsigned uid, MCContext &Ctx) const override; /// Returns relocation base for the given PIC jumptable. SDValue getPICJumpTableRelocBase(SDValue Table, SelectionDAG &DAG) const override; const MCExpr * getPICJumpTableRelocBaseExpr(const MachineFunction *MF, unsigned JTI, MCContext &Ctx) const override; /// Return the desired alignment for ByVal aggregate /// function arguments in the caller parameter area. For X86, aggregates /// that contains are placed at 16-byte boundaries while the rest are at /// 4-byte boundaries. uint64_t getByValTypeAlignment(Type *Ty, const DataLayout &DL) const override; EVT getOptimalMemOpType(const MemOp &Op, const AttributeList &FuncAttributes) const override; /// Returns true if it's safe to use load / store of the /// specified type to expand memcpy / memset inline. This is mostly true /// for all types except for some special cases. For example, on X86 /// targets without SSE2 f64 load / store are done with fldl / fstpl which /// also does type conversion. Note the specified type doesn't have to be /// legal as the hook is used before type legalization. bool isSafeMemOpType(MVT VT) const override; /// Returns true if the target allows unaligned memory accesses of the /// specified type. Returns whether it is "fast" in the last argument. bool allowsMisalignedMemoryAccesses(EVT VT, unsigned AS, Align Alignment, MachineMemOperand::Flags Flags, bool *Fast) const override; /// Provide custom lowering hooks for some operations. /// SDValue LowerOperation(SDValue Op, SelectionDAG &DAG) const override; /// Replace the results of node with an illegal result /// type with new values built out of custom code. /// void ReplaceNodeResults(SDNode *N, SmallVectorImpl&Results, SelectionDAG &DAG) const override; SDValue PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const override; /// Return true if the target has native support for /// the specified value type and it is 'desirable' to use the type for the /// given node type. e.g. On x86 i16 is legal, but undesirable since i16 /// instruction encodings are longer and some i16 instructions are slow. bool isTypeDesirableForOp(unsigned Opc, EVT VT) const override; /// Return true if the target has native support for the /// specified value type and it is 'desirable' to use the type. e.g. On x86 /// i16 is legal, but undesirable since i16 instruction encodings are longer /// and some i16 instructions are slow. bool IsDesirableToPromoteOp(SDValue Op, EVT &PVT) const override; /// Return the newly negated expression if the cost is not expensive and /// set the cost in \p Cost to indicate that if it is cheaper or neutral to /// do the negation. SDValue getNegatedExpression(SDValue Op, SelectionDAG &DAG, bool LegalOperations, bool ForCodeSize, NegatibleCost &Cost, unsigned Depth) const override; MachineBasicBlock * EmitInstrWithCustomInserter(MachineInstr &MI, MachineBasicBlock *MBB) const override; /// This method returns the name of a target specific DAG node. const char *getTargetNodeName(unsigned Opcode) const override; /// Do not merge vector stores after legalization because that may conflict /// with x86-specific store splitting optimizations. bool mergeStoresAfterLegalization(EVT MemVT) const override { return !MemVT.isVector(); } bool canMergeStoresTo(unsigned AddressSpace, EVT MemVT, const MachineFunction &MF) const override; bool isCheapToSpeculateCttz() const override; bool isCheapToSpeculateCtlz() const override; bool isCtlzFast() const override; bool hasBitPreservingFPLogic(EVT VT) const override { return VT == MVT::f32 || VT == MVT::f64 || VT.isVector() || (VT == MVT::f16 && X86ScalarSSEf16); } bool isMultiStoresCheaperThanBitsMerge(EVT LTy, EVT HTy) const override { // If the pair to store is a mixture of float and int values, we will // save two bitwise instructions and one float-to-int instruction and // increase one store instruction. There is potentially a more // significant benefit because it avoids the float->int domain switch // for input value. So It is more likely a win. if ((LTy.isFloatingPoint() && HTy.isInteger()) || (LTy.isInteger() && HTy.isFloatingPoint())) return true; // If the pair only contains int values, we will save two bitwise // instructions and increase one store instruction (costing one more // store buffer). Since the benefit is more blurred so we leave // such pair out until we get testcase to prove it is a win. return false; } bool isMaskAndCmp0FoldingBeneficial(const Instruction &AndI) const override; bool hasAndNotCompare(SDValue Y) const override; bool hasAndNot(SDValue Y) const override; bool hasBitTest(SDValue X, SDValue Y) const override; bool shouldProduceAndByConstByHoistingConstFromShiftsLHSOfAnd( SDValue X, ConstantSDNode *XC, ConstantSDNode *CC, SDValue Y, unsigned OldShiftOpcode, unsigned NewShiftOpcode, SelectionDAG &DAG) const override; bool shouldFoldConstantShiftPairToMask(const SDNode *N, CombineLevel Level) const override; bool shouldFoldMaskToVariableShiftPair(SDValue Y) const override; bool shouldTransformSignedTruncationCheck(EVT XVT, unsigned KeptBits) const override { // For vectors, we don't have a preference.. if (XVT.isVector()) return false; auto VTIsOk = [](EVT VT) -> bool { return VT == MVT::i8 || VT == MVT::i16 || VT == MVT::i32 || VT == MVT::i64; }; // We are ok with KeptBitsVT being byte/word/dword, what MOVS supports. // XVT will be larger than KeptBitsVT. MVT KeptBitsVT = MVT::getIntegerVT(KeptBits); return VTIsOk(XVT) && VTIsOk(KeptBitsVT); } bool shouldExpandShift(SelectionDAG &DAG, SDNode *N) const override; bool shouldSplatInsEltVarIndex(EVT VT) const override; bool shouldConvertFpToSat(unsigned Op, EVT FPVT, EVT VT) const override { // Converting to sat variants holds little benefit on X86 as we will just // need to saturate the value back using fp arithmatic. return Op != ISD::FP_TO_UINT_SAT && isOperationLegalOrCustom(Op, VT); } bool convertSetCCLogicToBitwiseLogic(EVT VT) const override { return VT.isScalarInteger(); } /// Vector-sized comparisons are fast using PCMPEQ + PMOVMSK or PTEST. MVT hasFastEqualityCompare(unsigned NumBits) const override; /// Return the value type to use for ISD::SETCC. EVT getSetCCResultType(const DataLayout &DL, LLVMContext &Context, EVT VT) const override; bool targetShrinkDemandedConstant(SDValue Op, const APInt &DemandedBits, const APInt &DemandedElts, TargetLoweringOpt &TLO) const override; /// Determine which of the bits specified in Mask are known to be either /// zero or one and return them in the KnownZero/KnownOne bitsets. void computeKnownBitsForTargetNode(const SDValue Op, KnownBits &Known, const APInt &DemandedElts, const SelectionDAG &DAG, unsigned Depth = 0) const override; /// Determine the number of bits in the operation that are sign bits. unsigned ComputeNumSignBitsForTargetNode(SDValue Op, const APInt &DemandedElts, const SelectionDAG &DAG, unsigned Depth) const override; bool SimplifyDemandedVectorEltsForTargetNode(SDValue Op, const APInt &DemandedElts, APInt &KnownUndef, APInt &KnownZero, TargetLoweringOpt &TLO, unsigned Depth) const override; bool SimplifyDemandedVectorEltsForTargetShuffle(SDValue Op, const APInt &DemandedElts, unsigned MaskIndex, TargetLoweringOpt &TLO, unsigned Depth) const; bool SimplifyDemandedBitsForTargetNode(SDValue Op, const APInt &DemandedBits, const APInt &DemandedElts, KnownBits &Known, TargetLoweringOpt &TLO, unsigned Depth) const override; SDValue SimplifyMultipleUseDemandedBitsForTargetNode( SDValue Op, const APInt &DemandedBits, const APInt &DemandedElts, SelectionDAG &DAG, unsigned Depth) const override; bool isSplatValueForTargetNode(SDValue Op, const APInt &DemandedElts, APInt &UndefElts, unsigned Depth) const override; const Constant *getTargetConstantFromLoad(LoadSDNode *LD) const override; SDValue unwrapAddress(SDValue N) const override; SDValue getReturnAddressFrameIndex(SelectionDAG &DAG) const; bool ExpandInlineAsm(CallInst *CI) const override; ConstraintType getConstraintType(StringRef Constraint) const override; /// Examine constraint string and operand type and determine a weight value. /// The operand object must already have been set up with the operand type. ConstraintWeight getSingleConstraintMatchWeight(AsmOperandInfo &info, const char *constraint) const override; const char *LowerXConstraint(EVT ConstraintVT) const override; /// Lower the specified operand into the Ops vector. If it is invalid, don't /// add anything to Ops. If hasMemory is true it means one of the asm /// constraint of the inline asm instruction being processed is 'm'. void LowerAsmOperandForConstraint(SDValue Op, std::string &Constraint, std::vector &Ops, SelectionDAG &DAG) const override; unsigned getInlineAsmMemConstraint(StringRef ConstraintCode) const override { if (ConstraintCode == "v") return InlineAsm::Constraint_v; return TargetLowering::getInlineAsmMemConstraint(ConstraintCode); } /// Handle Lowering flag assembly outputs. SDValue LowerAsmOutputForConstraint(SDValue &Chain, SDValue &Flag, const SDLoc &DL, const AsmOperandInfo &Constraint, SelectionDAG &DAG) const override; /// Given a physical register constraint /// (e.g. {edx}), return the register number and the register class for the /// register. This should only be used for C_Register constraints. On /// error, this returns a register number of 0. std::pair getRegForInlineAsmConstraint(const TargetRegisterInfo *TRI, StringRef Constraint, MVT VT) const override; /// Return true if the addressing mode represented /// by AM is legal for this target, for a load/store of the specified type. bool isLegalAddressingMode(const DataLayout &DL, const AddrMode &AM, Type *Ty, unsigned AS, Instruction *I = nullptr) const override; /// Return true if the specified immediate is legal /// icmp immediate, that is the target has icmp instructions which can /// compare a register against the immediate without having to materialize /// the immediate into a register. bool isLegalICmpImmediate(int64_t Imm) const override; /// Return true if the specified immediate is legal /// add immediate, that is the target has add instructions which can /// add a register and the immediate without having to materialize /// the immediate into a register. bool isLegalAddImmediate(int64_t Imm) const override; bool isLegalStoreImmediate(int64_t Imm) const override; /// Return the cost of the scaling factor used in the addressing /// mode represented by AM for this target, for a load/store /// of the specified type. /// If the AM is supported, the return value must be >= 0. /// If the AM is not supported, it returns a negative value. InstructionCost getScalingFactorCost(const DataLayout &DL, const AddrMode &AM, Type *Ty, unsigned AS) const override; /// This is used to enable splatted operand transforms for vector shifts /// and vector funnel shifts. bool isVectorShiftByScalarCheap(Type *Ty) const override; /// Add x86-specific opcodes to the default list. bool isBinOp(unsigned Opcode) const override; /// Returns true if the opcode is a commutative binary operation. bool isCommutativeBinOp(unsigned Opcode) const override; /// Return true if it's free to truncate a value of /// type Ty1 to type Ty2. e.g. On x86 it's free to truncate a i32 value in /// register EAX to i16 by referencing its sub-register AX. bool isTruncateFree(Type *Ty1, Type *Ty2) const override; bool isTruncateFree(EVT VT1, EVT VT2) const override; bool allowTruncateForTailCall(Type *Ty1, Type *Ty2) const override; /// Return true if any actual instruction that defines a /// value of type Ty1 implicit zero-extends the value to Ty2 in the result /// register. This does not necessarily include registers defined in /// unknown ways, such as incoming arguments, or copies from unknown /// virtual registers. Also, if isTruncateFree(Ty2, Ty1) is true, this /// does not necessarily apply to truncate instructions. e.g. on x86-64, /// all instructions that define 32-bit values implicit zero-extend the /// result out to 64 bits. bool isZExtFree(Type *Ty1, Type *Ty2) const override; bool isZExtFree(EVT VT1, EVT VT2) const override; bool isZExtFree(SDValue Val, EVT VT2) const override; bool shouldSinkOperands(Instruction *I, SmallVectorImpl &Ops) const override; bool shouldConvertPhiType(Type *From, Type *To) const override; /// Return true if folding a vector load into ExtVal (a sign, zero, or any /// extend node) is profitable. bool isVectorLoadExtDesirable(SDValue) const override; /// Return true if an FMA operation is faster than a pair of fmul and fadd /// instructions. fmuladd intrinsics will be expanded to FMAs when this /// method returns true, otherwise fmuladd is expanded to fmul + fadd. bool isFMAFasterThanFMulAndFAdd(const MachineFunction &MF, EVT VT) const override; /// Return true if it's profitable to narrow /// operations of type VT1 to VT2. e.g. on x86, it's profitable to narrow /// from i32 to i8 but not from i32 to i16. bool isNarrowingProfitable(EVT VT1, EVT VT2) const override; bool shouldFoldSelectWithIdentityConstant(unsigned BinOpcode, EVT VT) const override; /// Given an intrinsic, checks if on the target the intrinsic will need to map /// to a MemIntrinsicNode (touches memory). If this is the case, it returns /// true and stores the intrinsic information into the IntrinsicInfo that was /// passed to the function. bool getTgtMemIntrinsic(IntrinsicInfo &Info, const CallInst &I, MachineFunction &MF, unsigned Intrinsic) const override; /// Returns true if the target can instruction select the /// specified FP immediate natively. If false, the legalizer will /// materialize the FP immediate as a load from a constant pool. bool isFPImmLegal(const APFloat &Imm, EVT VT, bool ForCodeSize) const override; /// Targets can use this to indicate that they only support *some* /// VECTOR_SHUFFLE operations, those with specific masks. By default, if a /// target supports the VECTOR_SHUFFLE node, all mask values are assumed to /// be legal. bool isShuffleMaskLegal(ArrayRef Mask, EVT VT) const override; /// Similar to isShuffleMaskLegal. Targets can use this to indicate if there /// is a suitable VECTOR_SHUFFLE that can be used to replace a VAND with a /// constant pool entry. bool isVectorClearMaskLegal(ArrayRef Mask, EVT VT) const override; /// Returns true if lowering to a jump table is allowed. bool areJTsAllowed(const Function *Fn) const override; /// If true, then instruction selection should /// seek to shrink the FP constant of the specified type to a smaller type /// in order to save space and / or reduce runtime. bool ShouldShrinkFPConstant(EVT VT) const override { // Don't shrink FP constpool if SSE2 is available since cvtss2sd is more // expensive than a straight movsd. On the other hand, it's important to // shrink long double fp constant since fldt is very slow. return !X86ScalarSSEf64 || VT == MVT::f80; } /// Return true if we believe it is correct and profitable to reduce the /// load node to a smaller type. bool shouldReduceLoadWidth(SDNode *Load, ISD::LoadExtType ExtTy, EVT NewVT) const override; /// Return true if the specified scalar FP type is computed in an SSE /// register, not on the X87 floating point stack. bool isScalarFPTypeInSSEReg(EVT VT) const { return (VT == MVT::f64 && X86ScalarSSEf64) || // f64 is when SSE2 (VT == MVT::f32 && X86ScalarSSEf32) || // f32 is when SSE1 (VT == MVT::f16 && X86ScalarSSEf16); // f16 is when AVX512FP16 } /// Returns true if it is beneficial to convert a load of a constant /// to just the constant itself. bool shouldConvertConstantLoadToIntImm(const APInt &Imm, Type *Ty) const override; bool reduceSelectOfFPConstantLoads(EVT CmpOpVT) const override; bool convertSelectOfConstantsToMath(EVT VT) const override; bool decomposeMulByConstant(LLVMContext &Context, EVT VT, SDValue C) const override; /// Return true if EXTRACT_SUBVECTOR is cheap for this result type /// with this index. bool isExtractSubvectorCheap(EVT ResVT, EVT SrcVT, unsigned Index) const override; /// Scalar ops always have equal or better analysis/performance/power than /// the vector equivalent, so this always makes sense if the scalar op is /// supported. bool shouldScalarizeBinop(SDValue) const override; /// Extract of a scalar FP value from index 0 of a vector is free. bool isExtractVecEltCheap(EVT VT, unsigned Index) const override { EVT EltVT = VT.getScalarType(); return (EltVT == MVT::f32 || EltVT == MVT::f64) && Index == 0; } /// Overflow nodes should get combined/lowered to optimal instructions /// (they should allow eliminating explicit compares by getting flags from /// math ops). bool shouldFormOverflowOp(unsigned Opcode, EVT VT, bool MathUsed) const override; bool storeOfVectorConstantIsCheap(EVT MemVT, unsigned NumElem, unsigned AddrSpace) const override { // If we can replace more than 2 scalar stores, there will be a reduction // in instructions even after we add a vector constant load. return NumElem > 2; } bool isLoadBitCastBeneficial(EVT LoadVT, EVT BitcastVT, const SelectionDAG &DAG, const MachineMemOperand &MMO) const override; /// Intel processors have a unified instruction and data cache const char * getClearCacheBuiltinName() const override { return nullptr; // nothing to do, move along. } Register getRegisterByName(const char* RegName, LLT VT, const MachineFunction &MF) const override; /// If a physical register, this returns the register that receives the /// exception address on entry to an EH pad. Register getExceptionPointerRegister(const Constant *PersonalityFn) const override; /// If a physical register, this returns the register that receives the /// exception typeid on entry to a landing pad. Register getExceptionSelectorRegister(const Constant *PersonalityFn) const override; virtual bool needsFixedCatchObjects() const override; /// This method returns a target specific FastISel object, /// or null if the target does not support "fast" ISel. FastISel *createFastISel(FunctionLoweringInfo &funcInfo, const TargetLibraryInfo *libInfo) const override; /// If the target has a standard location for the stack protector cookie, /// returns the address of that location. Otherwise, returns nullptr. Value *getIRStackGuard(IRBuilderBase &IRB) const override; bool useLoadStackGuardNode() const override; bool useStackGuardXorFP() const override; void insertSSPDeclarations(Module &M) const override; Value *getSDagStackGuard(const Module &M) const override; Function *getSSPStackGuardCheck(const Module &M) const override; SDValue emitStackGuardXorFP(SelectionDAG &DAG, SDValue Val, const SDLoc &DL) const override; /// Return true if the target stores SafeStack pointer at a fixed offset in /// some non-standard address space, and populates the address space and /// offset as appropriate. Value *getSafeStackPointerLocation(IRBuilderBase &IRB) const override; std::pair BuildFILD(EVT DstVT, EVT SrcVT, const SDLoc &DL, SDValue Chain, SDValue Pointer, MachinePointerInfo PtrInfo, Align Alignment, SelectionDAG &DAG) const; /// Customize the preferred legalization strategy for certain types. LegalizeTypeAction getPreferredVectorAction(MVT VT) const override; bool softPromoteHalfType() const override { return true; } MVT getRegisterTypeForCallingConv(LLVMContext &Context, CallingConv::ID CC, EVT VT) const override; unsigned getNumRegistersForCallingConv(LLVMContext &Context, CallingConv::ID CC, EVT VT) const override; unsigned getVectorTypeBreakdownForCallingConv( LLVMContext &Context, CallingConv::ID CC, EVT VT, EVT &IntermediateVT, unsigned &NumIntermediates, MVT &RegisterVT) const override; bool isIntDivCheap(EVT VT, AttributeList Attr) const override; bool supportSwiftError() const override; bool hasStackProbeSymbol(MachineFunction &MF) const override; bool hasInlineStackProbe(MachineFunction &MF) const override; StringRef getStackProbeSymbolName(MachineFunction &MF) const override; unsigned getStackProbeSize(MachineFunction &MF) const; bool hasVectorBlend() const override { return true; } unsigned getMaxSupportedInterleaveFactor() const override { return 4; } /// Lower interleaved load(s) into target specific /// instructions/intrinsics. bool lowerInterleavedLoad(LoadInst *LI, ArrayRef Shuffles, ArrayRef Indices, unsigned Factor) const override; /// Lower interleaved store(s) into target specific /// instructions/intrinsics. bool lowerInterleavedStore(StoreInst *SI, ShuffleVectorInst *SVI, unsigned Factor) const override; SDValue expandIndirectJTBranch(const SDLoc& dl, SDValue Value, SDValue Addr, SelectionDAG &DAG) const override; Align getPrefLoopAlignment(MachineLoop *ML) const override; protected: std::pair findRepresentativeClass(const TargetRegisterInfo *TRI, MVT VT) const override; private: /// Keep a reference to the X86Subtarget around so that we can /// make the right decision when generating code for different targets. const X86Subtarget &Subtarget; /// Select between SSE or x87 floating point ops. /// When SSE is available, use it for f32 operations. /// When SSE2 is available, use it for f64 operations. bool X86ScalarSSEf32; bool X86ScalarSSEf64; bool X86ScalarSSEf16; /// A list of legal FP immediates. std::vector LegalFPImmediates; /// Indicate that this x86 target can instruction /// select the specified FP immediate natively. void addLegalFPImmediate(const APFloat& Imm) { LegalFPImmediates.push_back(Imm); } SDValue LowerCallResult(SDValue Chain, SDValue InFlag, CallingConv::ID CallConv, bool isVarArg, const SmallVectorImpl &Ins, const SDLoc &dl, SelectionDAG &DAG, SmallVectorImpl &InVals, uint32_t *RegMask) const; SDValue LowerMemArgument(SDValue Chain, CallingConv::ID CallConv, const SmallVectorImpl &ArgInfo, const SDLoc &dl, SelectionDAG &DAG, const CCValAssign &VA, MachineFrameInfo &MFI, unsigned i) const; SDValue LowerMemOpCallTo(SDValue Chain, SDValue StackPtr, SDValue Arg, const SDLoc &dl, SelectionDAG &DAG, const CCValAssign &VA, ISD::ArgFlagsTy Flags, bool isByval) const; // Call lowering helpers. /// Check whether the call is eligible for tail call optimization. Targets /// that want to do tail call optimization should implement this function. bool IsEligibleForTailCallOptimization( SDValue Callee, CallingConv::ID CalleeCC, bool IsCalleeStackStructRet, bool isVarArg, Type *RetTy, const SmallVectorImpl &Outs, const SmallVectorImpl &OutVals, const SmallVectorImpl &Ins, SelectionDAG &DAG) const; SDValue EmitTailCallLoadRetAddr(SelectionDAG &DAG, SDValue &OutRetAddr, SDValue Chain, bool IsTailCall, bool Is64Bit, int FPDiff, const SDLoc &dl) const; unsigned GetAlignedArgumentStackSize(unsigned StackSize, SelectionDAG &DAG) const; unsigned getAddressSpace() const; SDValue FP_TO_INTHelper(SDValue Op, SelectionDAG &DAG, bool IsSigned, SDValue &Chain) const; SDValue LRINT_LLRINTHelper(SDNode *N, SelectionDAG &DAG) const; SDValue LowerBUILD_VECTOR(SDValue Op, SelectionDAG &DAG) const; SDValue LowerVSELECT(SDValue Op, SelectionDAG &DAG) const; SDValue LowerEXTRACT_VECTOR_ELT(SDValue Op, SelectionDAG &DAG) const; SDValue LowerINSERT_VECTOR_ELT(SDValue Op, SelectionDAG &DAG) const; unsigned getGlobalWrapperKind(const GlobalValue *GV = nullptr, const unsigned char OpFlags = 0) const; SDValue LowerConstantPool(SDValue Op, SelectionDAG &DAG) const; SDValue LowerBlockAddress(SDValue Op, SelectionDAG &DAG) const; SDValue LowerGlobalAddress(SDValue Op, SelectionDAG &DAG) const; SDValue LowerGlobalTLSAddress(SDValue Op, SelectionDAG &DAG) const; SDValue LowerExternalSymbol(SDValue Op, SelectionDAG &DAG) const; /// Creates target global address or external symbol nodes for calls or /// other uses. SDValue LowerGlobalOrExternal(SDValue Op, SelectionDAG &DAG, bool ForCall) const; SDValue LowerSINT_TO_FP(SDValue Op, SelectionDAG &DAG) const; SDValue LowerUINT_TO_FP(SDValue Op, SelectionDAG &DAG) const; SDValue LowerTRUNCATE(SDValue Op, SelectionDAG &DAG) const; SDValue LowerFP_TO_INT(SDValue Op, SelectionDAG &DAG) const; SDValue LowerFP_TO_INT_SAT(SDValue Op, SelectionDAG &DAG) const; SDValue LowerLRINT_LLRINT(SDValue Op, SelectionDAG &DAG) const; SDValue LowerSETCC(SDValue Op, SelectionDAG &DAG) const; SDValue LowerSETCCCARRY(SDValue Op, SelectionDAG &DAG) const; SDValue LowerSELECT(SDValue Op, SelectionDAG &DAG) const; SDValue LowerBRCOND(SDValue Op, SelectionDAG &DAG) const; SDValue LowerJumpTable(SDValue Op, SelectionDAG &DAG) const; SDValue LowerDYNAMIC_STACKALLOC(SDValue Op, SelectionDAG &DAG) const; SDValue LowerVASTART(SDValue Op, SelectionDAG &DAG) const; SDValue LowerVAARG(SDValue Op, SelectionDAG &DAG) const; SDValue LowerRETURNADDR(SDValue Op, SelectionDAG &DAG) const; SDValue LowerADDROFRETURNADDR(SDValue Op, SelectionDAG &DAG) const; SDValue LowerFRAMEADDR(SDValue Op, SelectionDAG &DAG) const; SDValue LowerFRAME_TO_ARGS_OFFSET(SDValue Op, SelectionDAG &DAG) const; SDValue LowerEH_RETURN(SDValue Op, SelectionDAG &DAG) const; SDValue lowerEH_SJLJ_SETJMP(SDValue Op, SelectionDAG &DAG) const; SDValue lowerEH_SJLJ_LONGJMP(SDValue Op, SelectionDAG &DAG) const; SDValue lowerEH_SJLJ_SETUP_DISPATCH(SDValue Op, SelectionDAG &DAG) const; SDValue LowerINIT_TRAMPOLINE(SDValue Op, SelectionDAG &DAG) const; SDValue LowerFLT_ROUNDS_(SDValue Op, SelectionDAG &DAG) const; SDValue LowerSET_ROUNDING(SDValue Op, SelectionDAG &DAG) const; SDValue LowerWin64_i128OP(SDValue Op, SelectionDAG &DAG) const; SDValue LowerWin64_FP_TO_INT128(SDValue Op, SelectionDAG &DAG, SDValue &Chain) const; SDValue LowerWin64_INT128_TO_FP(SDValue Op, SelectionDAG &DAG) const; SDValue LowerGC_TRANSITION(SDValue Op, SelectionDAG &DAG) const; SDValue LowerINTRINSIC_WO_CHAIN(SDValue Op, SelectionDAG &DAG) const; SDValue lowerFaddFsub(SDValue Op, SelectionDAG &DAG) const; SDValue LowerFP_EXTEND(SDValue Op, SelectionDAG &DAG) const; SDValue LowerFP_ROUND(SDValue Op, SelectionDAG &DAG) const; SDValue LowerFormalArguments(SDValue Chain, CallingConv::ID CallConv, bool isVarArg, const SmallVectorImpl &Ins, const SDLoc &dl, SelectionDAG &DAG, SmallVectorImpl &InVals) const override; SDValue LowerCall(CallLoweringInfo &CLI, SmallVectorImpl &InVals) const override; SDValue LowerReturn(SDValue Chain, CallingConv::ID CallConv, bool isVarArg, const SmallVectorImpl &Outs, const SmallVectorImpl &OutVals, const SDLoc &dl, SelectionDAG &DAG) const override; bool supportSplitCSR(MachineFunction *MF) const override { return MF->getFunction().getCallingConv() == CallingConv::CXX_FAST_TLS && MF->getFunction().hasFnAttribute(Attribute::NoUnwind); } void initializeSplitCSR(MachineBasicBlock *Entry) const override; void insertCopiesSplitCSR( MachineBasicBlock *Entry, const SmallVectorImpl &Exits) const override; bool isUsedByReturnOnly(SDNode *N, SDValue &Chain) const override; bool mayBeEmittedAsTailCall(const CallInst *CI) const override; EVT getTypeForExtReturn(LLVMContext &Context, EVT VT, ISD::NodeType ExtendKind) const override; bool CanLowerReturn(CallingConv::ID CallConv, MachineFunction &MF, bool isVarArg, const SmallVectorImpl &Outs, LLVMContext &Context) const override; const MCPhysReg *getScratchRegisters(CallingConv::ID CC) const override; TargetLoweringBase::AtomicExpansionKind shouldExpandAtomicLoadInIR(LoadInst *LI) const override; bool shouldExpandAtomicStoreInIR(StoreInst *SI) const override; TargetLoweringBase::AtomicExpansionKind shouldExpandAtomicRMWInIR(AtomicRMWInst *AI) const override; LoadInst * lowerIdempotentRMWIntoFencedLoad(AtomicRMWInst *AI) const override; bool lowerAtomicStoreAsStoreSDNode(const StoreInst &SI) const override; bool lowerAtomicLoadAsLoadSDNode(const LoadInst &LI) const override; bool needsCmpXchgNb(Type *MemType) const; void SetupEntryBlockForSjLj(MachineInstr &MI, MachineBasicBlock *MBB, MachineBasicBlock *DispatchBB, int FI) const; // Utility function to emit the low-level va_arg code for X86-64. MachineBasicBlock * EmitVAARGWithCustomInserter(MachineInstr &MI, MachineBasicBlock *MBB) const; /// Utility function to emit the xmm reg save portion of va_start. MachineBasicBlock *EmitLoweredCascadedSelect(MachineInstr &MI1, MachineInstr &MI2, MachineBasicBlock *BB) const; MachineBasicBlock *EmitLoweredSelect(MachineInstr &I, MachineBasicBlock *BB) const; MachineBasicBlock *EmitLoweredCatchRet(MachineInstr &MI, MachineBasicBlock *BB) const; MachineBasicBlock *EmitLoweredSegAlloca(MachineInstr &MI, MachineBasicBlock *BB) const; MachineBasicBlock *EmitLoweredProbedAlloca(MachineInstr &MI, MachineBasicBlock *BB) const; MachineBasicBlock *EmitLoweredTLSAddr(MachineInstr &MI, MachineBasicBlock *BB) const; MachineBasicBlock *EmitLoweredTLSCall(MachineInstr &MI, MachineBasicBlock *BB) const; MachineBasicBlock *EmitLoweredIndirectThunk(MachineInstr &MI, MachineBasicBlock *BB) const; MachineBasicBlock *emitEHSjLjSetJmp(MachineInstr &MI, MachineBasicBlock *MBB) const; void emitSetJmpShadowStackFix(MachineInstr &MI, MachineBasicBlock *MBB) const; MachineBasicBlock *emitEHSjLjLongJmp(MachineInstr &MI, MachineBasicBlock *MBB) const; MachineBasicBlock *emitLongJmpShadowStackFix(MachineInstr &MI, MachineBasicBlock *MBB) const; MachineBasicBlock *EmitSjLjDispatchBlock(MachineInstr &MI, MachineBasicBlock *MBB) const; /// Emit flags for the given setcc condition and operands. Also returns the /// corresponding X86 condition code constant in X86CC. SDValue emitFlagsForSetcc(SDValue Op0, SDValue Op1, ISD::CondCode CC, const SDLoc &dl, SelectionDAG &DAG, SDValue &X86CC) const; /// Check if replacement of SQRT with RSQRT should be disabled. bool isFsqrtCheap(SDValue Op, SelectionDAG &DAG) const override; /// Use rsqrt* to speed up sqrt calculations. SDValue getSqrtEstimate(SDValue Op, SelectionDAG &DAG, int Enabled, int &RefinementSteps, bool &UseOneConstNR, bool Reciprocal) const override; /// Use rcp* to speed up fdiv calculations. SDValue getRecipEstimate(SDValue Op, SelectionDAG &DAG, int Enabled, int &RefinementSteps) const override; /// Reassociate floating point divisions into multiply by reciprocal. unsigned combineRepeatedFPDivisors() const override; SDValue BuildSDIVPow2(SDNode *N, const APInt &Divisor, SelectionDAG &DAG, SmallVectorImpl &Created) const override; }; namespace X86 { FastISel *createFastISel(FunctionLoweringInfo &funcInfo, const TargetLibraryInfo *libInfo); } // end namespace X86 // X86 specific Gather/Scatter nodes. // The class has the same order of operands as MaskedGatherScatterSDNode for // convenience. class X86MaskedGatherScatterSDNode : public MemIntrinsicSDNode { public: // This is a intended as a utility and should never be directly created. X86MaskedGatherScatterSDNode() = delete; ~X86MaskedGatherScatterSDNode() = delete; const SDValue &getBasePtr() const { return getOperand(3); } const SDValue &getIndex() const { return getOperand(4); } const SDValue &getMask() const { return getOperand(2); } const SDValue &getScale() const { return getOperand(5); } static bool classof(const SDNode *N) { return N->getOpcode() == X86ISD::MGATHER || N->getOpcode() == X86ISD::MSCATTER; } }; class X86MaskedGatherSDNode : public X86MaskedGatherScatterSDNode { public: const SDValue &getPassThru() const { return getOperand(1); } static bool classof(const SDNode *N) { return N->getOpcode() == X86ISD::MGATHER; } }; class X86MaskedScatterSDNode : public X86MaskedGatherScatterSDNode { public: const SDValue &getValue() const { return getOperand(1); } static bool classof(const SDNode *N) { return N->getOpcode() == X86ISD::MSCATTER; } }; /// Generate unpacklo/unpackhi shuffle mask. void createUnpackShuffleMask(EVT VT, SmallVectorImpl &Mask, bool Lo, bool Unary); /// Similar to unpacklo/unpackhi, but without the 128-bit lane limitation /// imposed by AVX and specific to the unary pattern. Example: /// v8iX Lo --> <0, 0, 1, 1, 2, 2, 3, 3> /// v8iX Hi --> <4, 4, 5, 5, 6, 6, 7, 7> void createSplat2ShuffleMask(MVT VT, SmallVectorImpl &Mask, bool Lo); } // end namespace llvm #endif // LLVM_LIB_TARGET_X86_X86ISELLOWERING_H