# A sample TOML config file for SeaweedFS filer store # Used with "weed filer" or "weed server -filer" # Put this file to one of the location, with descending priority # ./filer.toml # $HOME/.seaweedfs/filer.toml # /etc/seaweedfs/filer.toml #################################################### # Customizable filer server options #################################################### [filer.options] # with http DELETE, by default the filer would check whether a folder is empty. # recursive_delete will delete all sub folders and files, similar to "rm -Rf" recursive_delete = false #max_file_name_length = 255 #################################################### # The following are filer store options #################################################### [leveldb2] # local on disk, mostly for simple single-machine setup, fairly scalable # faster than previous leveldb, recommended. enabled = true dir = "./filerldb2" # directory to store level db files [leveldb3] # similar to leveldb2. # each bucket has its own meta store. enabled = false dir = "./filerldb3" # directory to store level db files [rocksdb] # local on disk, similar to leveldb # since it is using a C wrapper, you need to install rocksdb and build it by yourself enabled = false dir = "./filerrdb" # directory to store rocksdb files [sqlite] # local on disk, similar to leveldb enabled = false dbFile = "./filer.db" # sqlite db file [mysql] # or memsql, tidb # CREATE TABLE IF NOT EXISTS `filemeta` ( # `dirhash` BIGINT NOT NULL COMMENT 'first 64 bits of MD5 hash value of directory field', # `name` VARCHAR(766) NOT NULL COMMENT 'directory or file name', # `directory` TEXT NOT NULL COMMENT 'full path to parent directory', # `meta` LONGBLOB, # PRIMARY KEY (`dirhash`, `name`) # ) DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_bin; enabled = false # dsn will take priority over "hostname, port, username, password, database". # [username[:password]@][protocol[(address)]]/dbname[?param1=value1&...¶mN=valueN] dsn = "root@tcp(localhost:3306)/seaweedfs?collation=utf8mb4_bin" hostname = "localhost" port = 3306 username = "root" password = "" database = "" # create or use an existing database connection_max_idle = 2 connection_max_open = 100 connection_max_lifetime_seconds = 0 interpolateParams = false # if insert/upsert failing, you can disable upsert or update query syntax to match your RDBMS syntax: enableUpsert = true upsertQuery = """INSERT INTO `%s` (`dirhash`,`name`,`directory`,`meta`) VALUES (?,?,?,?) AS `new` ON DUPLICATE KEY UPDATE `meta` = `new`.`meta`""" [mysql2] # or memsql, tidb enabled = false createTable = """ CREATE TABLE IF NOT EXISTS `%s` ( `dirhash` BIGINT NOT NULL, `name` VARCHAR(766) NOT NULL, `directory` TEXT NOT NULL, `meta` LONGBLOB, PRIMARY KEY (`dirhash`, `name`) ) DEFAULT CHARSET=utf8mb4 COLLATE=utf8mb4_bin; """ hostname = "localhost" port = 3306 username = "root" password = "" database = "" # create or use an existing database connection_max_idle = 2 connection_max_open = 100 connection_max_lifetime_seconds = 0 interpolateParams = false # if insert/upsert failing, you can disable upsert or update query syntax to match your RDBMS syntax: enableUpsert = true upsertQuery = """INSERT INTO `%s` (`dirhash`,`name`,`directory`,`meta`) VALUES (?,?,?,?) AS `new` ON DUPLICATE KEY UPDATE `meta` = `new`.`meta`""" [postgres] # or cockroachdb, YugabyteDB # CREATE TABLE IF NOT EXISTS filemeta ( # dirhash BIGINT, # name VARCHAR(65535), # directory VARCHAR(65535), # meta bytea, # PRIMARY KEY (dirhash, name) # ); enabled = false hostname = "localhost" port = 5432 username = "postgres" password = "" database = "postgres" # create or use an existing database schema = "" sslmode = "disable" connection_max_idle = 100 connection_max_open = 100 connection_max_lifetime_seconds = 0 # if insert/upsert failing, you can disable upsert or update query syntax to match your RDBMS syntax: enableUpsert = true upsertQuery = """UPSERT INTO "%[1]s" (dirhash,name,directory,meta) VALUES($1,$2,$3,$4)""" [postgres2] enabled = false createTable = """ CREATE TABLE IF NOT EXISTS "%s" ( dirhash BIGINT, name VARCHAR(65535), directory VARCHAR(65535), meta bytea, PRIMARY KEY (dirhash, name) ); """ hostname = "localhost" port = 5432 username = "postgres" password = "" database = "postgres" # create or use an existing database schema = "" sslmode = "disable" connection_max_idle = 100 connection_max_open = 100 connection_max_lifetime_seconds = 0 # if insert/upsert failing, you can disable upsert or update query syntax to match your RDBMS syntax: enableUpsert = true upsertQuery = """UPSERT INTO "%[1]s" (dirhash,name,directory,meta) VALUES($1,$2,$3,$4)""" [cassandra] # CREATE TABLE filemeta ( # directory varchar, # name varchar, # meta blob, # PRIMARY KEY (directory, name) # ) WITH CLUSTERING ORDER BY (name ASC); enabled = false keyspace = "seaweedfs" hosts = [ "localhost:9042", ] username = "" password = "" # This changes the data layout. Only add new directories. Removing/Updating will cause data loss. superLargeDirectories = [] # Name of the datacenter local to this filer, used as host selection fallback. localDC = "" # Gocql connection timeout, default: 600ms connection_timeout_millisecond = 600 [hbase] enabled = false zkquorum = "" table = "seaweedfs" [redis2] enabled = false address = "localhost:6379" password = "" database = 0 # This changes the data layout. Only add new directories. Removing/Updating will cause data loss. superLargeDirectories = [] [redis2_sentinel] enabled = false addresses = ["172.22.12.7:26379","172.22.12.8:26379","172.22.12.9:26379"] masterName = "master" username = "" password = "" database = 0 [redis_cluster2] enabled = false addresses = [ "localhost:30001", "localhost:30002", "localhost:30003", "localhost:30004", "localhost:30005", "localhost:30006", ] password = "" # allows reads from slave servers or the master, but all writes still go to the master readOnly = false # automatically use the closest Redis server for reads routeByLatency = false # This changes the data layout. Only add new directories. Removing/Updating will cause data loss. superLargeDirectories = [] [redis_lua] enabled = false address = "localhost:6379" password = "" database = 0 # This changes the data layout. Only add new directories. Removing/Updating will cause data loss. superLargeDirectories = [] [redis_lua_sentinel] enabled = false addresses = ["172.22.12.7:26379","172.22.12.8:26379","172.22.12.9:26379"] masterName = "master" username = "" password = "" database = 0 [redis_lua_cluster] enabled = false addresses = [ "localhost:30001", "localhost:30002", "localhost:30003", "localhost:30004", "localhost:30005", "localhost:30006", ] password = "" # allows reads from slave servers or the master, but all writes still go to the master readOnly = false # automatically use the closest Redis server for reads routeByLatency = false # This changes the data layout. Only add new directories. Removing/Updating will cause data loss. superLargeDirectories = [] [redis3] # beta enabled = false address = "localhost:6379" password = "" database = 0 [redis3_sentinel] enabled = false addresses = ["172.22.12.7:26379","172.22.12.8:26379","172.22.12.9:26379"] masterName = "master" username = "" password = "" database = 0 [redis_cluster3] # beta enabled = false addresses = [ "localhost:30001", "localhost:30002", "localhost:30003", "localhost:30004", "localhost:30005", "localhost:30006", ] password = "" # allows reads from slave servers or the master, but all writes still go to the master readOnly = false # automatically use the closest Redis server for reads routeByLatency = false [etcd] enabled = false servers = "localhost:2379" username = "" password = "" key_prefix = "seaweedfs." timeout = "3s" # Set the CA certificate path tls_ca_file="" # Set the client certificate path tls_client_crt_file="" # Set the client private key path tls_client_key_file="" [mongodb] enabled = false uri = "mongodb://localhost:27017" username = "" password = "" ssl = false ssl_ca_file = "" ssl_cert_file = "" ssl_key_file = " insecure_skip_verify = false option_pool_size = 0 database = "seaweedfs" [elastic7] enabled = false servers = [ "http://localhost1:9200", "http://localhost2:9200", "http://localhost3:9200", ] username = "" password = "" sniff_enabled = false healthcheck_enabled = false # increase the value is recommend, be sure the value in Elastic is greater or equal here index.max_result_window = 10000 [arangodb] # in development dont use it enabled = false db_name = "seaweedfs" servers=["http://localhost:8529"] # list of servers to connect to # only basic auth supported for now username="" password="" # skip tls cert validation insecure_skip_verify = true [ydb] # https://ydb.tech/ enabled = false dsn = "grpc://localhost:2136?database=/local" prefix = "seaweedfs" useBucketPrefix = true # Fast Bucket Deletion poolSizeLimit = 50 dialTimeOut = 10 # Authenticate produced with one of next environment variables: # YDB_SERVICE_ACCOUNT_KEY_FILE_CREDENTIALS= — used service account key file by path # YDB_ANONYMOUS_CREDENTIALS="1" — used for authenticate with anonymous access. Anonymous access needs for connect to testing YDB installation # YDB_METADATA_CREDENTIALS="1" — used metadata service for authenticate to YDB from yandex cloud virtual machine or from yandex function # YDB_ACCESS_TOKEN_CREDENTIALS= — used for authenticate to YDB with short-life access token. For example, access token may be IAM token ########################## ########################## # To add path-specific filer store: # # 1. Add a name following the store type separated by a dot ".". E.g., cassandra.tmp # 2. Add a location configuration. E.g., location = "/tmp/" # 3. Copy and customize all other configurations. # Make sure they are not the same if using the same store type! # 4. Set enabled to true # # The following is just using redis as an example ########################## [redis2.tmp] enabled = false location = "/tmp/" address = "localhost:6379" password = "" database = 1 [tikv] enabled = false # If you have many pd address, use ',' split then: # pdaddrs = "pdhost1:2379, pdhost2:2379, pdhost3:2379" pdaddrs = "localhost:2379" # Concurrency for TiKV delete range deleterange_concurrency = 1 # Enable 1PC enable_1pc = false # Set the CA certificate path ca_path="" # Set the certificate path cert_path="" # Set the private key path key_path="" # The name list used to verify the cn name verify_cn=""