| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849 |
- #
- # Marlin Firmware
- # PlatformIO Configuration File
- #
- #################################
- #
- # STM32G0 Architecture
- #
- # Naming Example: STM32G0B1RET6
- #
- # G : Foundation
- # 0 : Cortex M0+ core (0:M0, 1-2:M3, 3-4:M4, 7:M7)
- # B1 : Line/Features
- # R : 64 pins (R:64 or 66, F:20)
- # E : 512KB Flash-memory (C:256KB, D:384KB, E:512KB, G:1024KB)
- # T : LQFP package
- # 6 : -40...85°C (7: ...105°C)
- #
- #################################
- #
- # BigTreeTech SKR mini E3 V3.0 (STM32G0B1RET6 ARM Cortex-M0+)
- #
- [env:STM32G0B1RE_btt]
- extends = stm32_variant
- platform = ststm32@~14.1.0
- platform_packages = framework-arduinoststm32@~4.20600.231001
- toolchain-gccarmnoneeabi@1.100301.220327
- board = marlin_STM32G0B1RE
- board_build.offset = 0x2000
- board_upload.offset_address = 0x08002000
- build_flags = ${stm32_variant.build_flags}
- -DPIN_SERIAL4_RX=PC_11 -DPIN_SERIAL4_TX=PC_10
- -DSERIAL_RX_BUFFER_SIZE=1024 -DSERIAL_TX_BUFFER_SIZE=1024
- -DTIMER_SERVO=TIM3 -DTIMER_TONE=TIM4
- -DSTEP_TIMER_IRQ_PRIO=0
- upload_protocol = stlink
- debug_tool = stlink
- #
- # Custom upload to SD via Marlin with Binary Protocol
- #
- [env:STM32G0B1RE_btt_xfer]
- extends = env:STM32G0B1RE_btt
- build_flags = ${env:STM32G0B1RE_btt.build_flags} -DXFER_BUILD
- extra_scripts = ${env:STM32G0B1RE_btt.extra_scripts}
- pre:buildroot/share/scripts/upload.py
- upload_protocol = custom
|
