marlinfw/config/examples/Wanhao/Duplicator i3 2.1/README.md

Configuration for the Wanhao Duplicator i3 v2.1

Made by Bot-In-a-Box Educational Robotics See original configuration repo

Notes:

• YMMV, but the included thermistor table has been tested to work with a 100k bed thermistor with a 10K pull-up resistor
• The smaller Marlin logo is used to save memory
• You may have a 4.7K pull-up resistor, in which case the included thermistor table will be off
• The included thermistor table was generated with buildroot/share/scripts/createTemperatureLookupMarlin.py --rp=10000
• Includes an optional custom Wanhao logo bootscreen designed to fit the stock LCD
• Includes an optional custom Chippy from Bot-In-a-Box bootscreen designed to fit the stock LCD

Inspirations:

• https://www.thingiverse.com/thing:3378807 (Custom firmware 1.x by Nitrogen777)
• https://www.thingiverse.com/thing:3378807 (Custom firmware 2.x by Remotheman)

Instructions:

• Copy the Configuration.h, _Bootscreen.h (or Chippy_Bootscreen.h; rename it _Bootscreen.h), and Configuration_adv.h to the Marlin/ directory
• Copy the thermistor_99.h and thermistors.h files to the Marlin/src/modules/thermistors directory
• Flash the firmware onto your Melzi (https://www.fission3d.com/guides/flash-bootloader-and-install-firmware-with-raspberry-pi might help)