Home Explore Help
Sign In
SMusatov
/
marlinfw
mirror of https://github.com/MarlinFirmware/Marlin
1
0
Fork 0
Files Wiki
Branch: bugfix-2.1.x
Branches Tags
marlinfw
/
buildroot
/
tests
/
BTT_GTR_V1_0

BTT_GTR_V1_0 2.8 KB
Permalink History Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748 
  1. #!/usr/bin/env bash
    2. 

  2. #
    3. 

  3. # Build tests for BigTreeTech GTR 1.0
    4. 

  4. #
    5. 

  5. 

  6. # exit on first failure
    7. 

  7. set -e
    8. 

  8. 

  9. restore_configs
    10. 

  10. opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
    11. 

  11.         EXTRUDERS 8 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 TEMP_SENSOR_5 1 TEMP_SENSOR_6 1 TEMP_SENSOR_7 1
    12. 

  12. # Not necessary to enable auto-fan for all extruders to hit problematic code paths
    13. 

  13. opt_set E0_AUTO_FAN_PIN PC10 E1_AUTO_FAN_PIN PC11 E2_AUTO_FAN_PIN PC12 NEOPIXEL_PIN PF13 \
    14. 

  14.         X_DRIVER_TYPE TMC2208 Y_DRIVER_TYPE TMC2130 \
    15. 

  15.         NUM_RUNOUT_SENSORS 8 FIL_RUNOUT_PIN 3 FIL_RUNOUT2_PIN 4 FIL_RUNOUT3_PIN 5 FIL_RUNOUT4_PIN 6 FIL_RUNOUT5_PIN 7 \
    16. 

  16.         FIL_RUNOUT6_PIN 8 FIL_RUNOUT7_PIN 9 FIL_RUNOUT8_PIN 10 FIL_RUNOUT4_STATE HIGH FIL_RUNOUT8_STATE HIGH \
    17. 

  17.         FILAMENT_RUNOUT_SCRIPT '"M600 T%c"'
    18. 

  18. opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER BLTOUCH NEOPIXEL_LED Z_SAFE_HOMING NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE \
    19. 

  19.            FILAMENT_RUNOUT_SENSOR FIL_RUNOUT4_PULLUP FIL_RUNOUT8_PULLUP FILAMENT_CHANGE_RESUME_ON_INSERT PAUSE_REHEAT_FAST_RESUME \
    20. 

  20.            LCD_BED_TRAMMING BED_TRAMMING_USE_PROBE
    21. 

  21. opt_disable CONFIGURE_FILAMENT_CHANGE
    22. 

  22. exec_test $1 $2 "BigTreeTech GTR | 8 Extruders | Auto-Fan | Mixed TMC Drivers | Runout Sensors w/ distinct states" "$3"
    23. 

  23. 

  24. restore_configs
    25. 

  25. opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
    26. 

  26.         EXTRUDERS 5 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 TEMP_SENSOR_3 1 TEMP_SENSOR_4 1 \
    27. 

  27.         Z_DRIVER_TYPE A4988 Z2_DRIVER_TYPE A4988 Z3_DRIVER_TYPE A4988 Z4_DRIVER_TYPE A4988 \
    28. 

  28.         DEFAULT_Kp_LIST '{ 22.2, 20.0, 21.0, 19.0, 18.0 }' DEFAULT_Ki_LIST '{ 1.08 }' DEFAULT_Kd_LIST '{ 114.0, 112.0, 110.0, 108.0 }' \
    29. 

  29.         Z3_STOP_PIN PI7 Z4_STOP_PIN PF6
    30. 

  30. opt_enable TOOLCHANGE_FILAMENT_SWAP TOOLCHANGE_MIGRATION_FEATURE TOOLCHANGE_FS_SLOW_FIRST_PRIME TOOLCHANGE_FS_PRIME_FIRST_USED \
    31. 

  31.            REPRAP_DISCOUNT_SMART_CONTROLLER PID_PARAMS_PER_HOTEND Z_MULTI_ENDSTOPS TC_GCODE_USE_GLOBAL_X TC_GCODE_USE_GLOBAL_Y
    32. 

  32. exec_test $1 $2 "BigTreeTech GTR | 6 Extruders | Quad Z + Endstops" "$3"
    33. 

  33. 

  34. restore_configs
    35. 

  35. opt_set MOTHERBOARD BOARD_BTT_GTR_V1_0 SERIAL_PORT -1 \
    36. 

  36.         EXTRUDERS 3 TEMP_SENSOR_1 1 TEMP_SENSOR_2 1 \
    37. 

  37.         SERVO1_PIN PE9 SERVO2_PIN PE11 \
    38. 

  38.         SERVO_DELAY '{ 300, 300, 300 }' \
    39. 

  39.         SWITCHING_TOOLHEAD_X_POS '{ 215, 0 ,0 }' \
    40. 

  40.         MPC_HEATER_POWER '{ 40.0f, 40.0f, 40.0f }' \
    41. 

  41.         MPC_BLOCK_HEAT_CAPACITY '{ 16.7f, 16.7f, 16.7f }' \
    42. 

  42.         MPC_SENSOR_RESPONSIVENESS '{ 0.22f, 0.22f, 0.22f }' \
    43. 

  43.         MPC_AMBIENT_XFER_COEFF '{ 0.068f, 0.068f, 0.068f }' \
    44. 

  44.         MPC_AMBIENT_XFER_COEFF_FAN255 '{ 0.097f, 0.097f, 0.097f }' \
    45. 

  45.         FILAMENT_HEAT_CAPACITY_PERMM '{ 5.6e-3f, 3.6e-3f, 5.6e-3f }'
    46. 

  46. opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SWITCHING_TOOLHEAD TOOL_SENSOR MPCTEMP MPC_EDIT_MENU MPC_AUTOTUNE MPC_AUTOTUNE_MENU
    47. 

  47. opt_disable PIDTEMP
    48. 

  48. exec_test $1 $2 "BigTreeTech GTR | MPC | Switching Toolhead | Tool Sensors" "$3"
    49.