123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260 |
- /*
- *******************************************************************************
- * Copyright (c) 2017, STMicroelectronics
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions are met:
- *
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *******************************************************************************
- */
- #include "pins_arduino.h"
- #ifdef __cplusplus
- extern "C" {
- #endif
- // Pin number
- // This array allows to wrap Arduino pin number(Dx or x)
- // to STM32 PinName (PX_n)
- const PinName digitalPin[] = {
- #if STM32F4X_PIN_NUM >= 64 //64 pins mcu, 51 gpio
- PC_13, //D0
- PC_14, //D1 - OSC32_IN
- PC_15, //D2 - OSC32_OUT
- PH_0, //D3 - OSC_IN
- PH_1, //D4 - OSC_OUT
- PB_2, //D5 - BOOT1
- PB_10, //D6 - 1:SPI2_SCK / I2C2_SCL / USART3_TX / TIM2_CH3
- PB_11, //D7 - 1:I2C2_SDA / USART3_RX / TIM2_CH4
- PB_12, //D8 - 1:SPI2_NSS / OTG_HS_ID
- PB_13, //D9 - 1:SPI2_SCK 2:OTG_HS_VBUS
- PB_14, //D10 - 1:SPI2_MISO / TIM12_CH1 / OTG_HS_DM
- PB_15, //D11 - SPI2_MOSI / TIM12_CH2 / OTG_HS_DP
- PC_6, //D12 - 1:TIM8_CH1 / SDIO_D6 / USART6_TX / TIM3_CH1
- PC_7, //D13 - 1:TIM8_CH2 / SDIO_D7 / USART6_RX / TIM3_CH2
- PC_8, //D14 - 1:TIM8_CH3 / SDIO_D0 / TIM3_CH3
- PC_9, //D15 - 1:TIM8_CH4 / SDIO_D1 / TIM3_CH4
- PA_8, //D16 - 1:TIM1_CH1 / I2C3_SCL / OTG_FS_SOF
- PA_9, //D17 - 1:USART1_TX / TIM1_CH2 2:OTG_FS_VBUS
- PA_10, //D18 - 1:USART1_RX / TIM1_CH3 / OTG_FS_ID
- PA_11, //D19 - 1:TIM1_CH4 / OTG_FS_DM
- PA_12, //D20 - 1:OTG_FS_DP
- PA_13, //D21 - 0:JTMS-SWDIO
- PA_14, //D22 - 0:JTCK-SWCLK
- PA_15, //D23 - 0:JTDI 1:SPI3_NSS / SPI1_NSS
- PC_10, //D24 - 1:UART4_TX / SPI3_SCK / SDIO_D2 / USART3_TX
- PC_11, //D25 - 1:UART4_RX / SPI3_MISO / SDIO_D3 / USART3_RX
- PC_12, //D26 - 1:UART5_TX / SPI3_MOSI / SDIO_CK
- PD_2, //D27 - 1:UART5_RX / SDIO_CMD
- PB_3, //D28 - 0:JTDO 1:SPI3_SCK / TIM2_CH2 / SPI1_SCK
- PB_4, //D29 - 0:NJTRST 1:SPI3_MISO / TIM3_CH1 / SPI1_MISO
- PB_5, //D30 - 1:TIM3_CH2 / SPI1_MOSI / SPI3_MOSI
- PB_6, //D31 - 1:I2C1_SCL / TIM4_CH1 / USART1_TX
- PB_7, //D32 - 1:I2C1_SDA / TIM4_CH2 / USART1_RX
- PB_8, //D33 - 1:I2C1_SCL / TIM4_CH3 / SDIO_D4 / TIM10_CH1
- PB_9, //D34 - 1:I2C1_SDA / TIM4_CH4 / SDIO_D5 / TIM11_CH1 / SPI2_NSS
- PA_0, //D35/A0 - 1:UART4_TX / TIM5_CH1 2:ADC123_IN0
- PA_1, //D36/A1 - 1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1
- PA_2, //D37/A2 - 1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2
- PA_3, //D38/A3 - 1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3
- PA_4, //D39/A4 - NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1
- PA_5, //D40/A5 - NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2
- PA_6, //D41/A6 - 1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6
- PA_7, //D42/A7 - 1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7
- PB_0, //D43/A8 - 1:TIM3_CH3 2:ADC12_IN8
- PB_1, //D44/A9 - 1:TIM3_CH4 2:ADC12_IN9
- PC_0, //D45/A10 - 1: 2:ADC123_IN10
- PC_1, //D46/A11 - 1: 2:ADC123_IN11
- PC_2, //D47/A12 - 1:SPI2_MISO 2:ADC123_IN12
- PC_3, //D48/A13 - 1:SPI2_MOSI 2:ADC123_IN13
- PC_4, //D49/A14 - 1: 2:ADC12_IN14
- PC_5, //D50/A15 - 1: 2:ADC12_IN15
- #if STM32F4X_PIN_NUM >= 144
- PF_3, //D51/A16 - 1:FSMC_A3 2:ADC3_IN9
- PF_4, //D52/A17 - 1:FSMC_A4 2:ADC3_IN14
- PF_5, //D53/A18 - 1:FSMC_A5 2:ADC3_IN15
- PF_6, //D54/A19 - 1:TIM10_CH1 2:ADC3_IN4
- PF_7, //D55/A20 - 1:TIM11_CH1 2:ADC3_IN5
- PF_8, //D56/A21 - 1:TIM13_CH1 2:ADC3_IN6
- PF_9, //D57/A22 - 1;TIM14_CH1 2:ADC3_IN7
- PF_10, //D58/A23 - 2:ADC3_IN8
- #endif
- #endif
- #if STM32F4X_PIN_NUM >= 100 //100 pins mcu, 82 gpio
- PE_2, //D59 - 1:FSMC_A23
- PE_3, //D60 - 1:FSMC_A19
- PE_4, //D61 - 1:FSMC_A20
- PE_5, //D62 - 1:FSMC_A21
- PE_6, //D63 - 1:FSMC_A22
- PE_7, //D64 - 1:FSMC_D4
- PE_8, //D65 - 1:FSMC_D5
- PE_9, //D66 - 1:FSMC_D6 / TIM1_CH1
- PE_10, //D67 - 1:FSMC_D7
- PE_11, //D68 - 1:FSMC_D8 / TIM1_CH2
- PE_12, //D69 - 1:FSMC_D9
- PE_13, //D70 - 1:FSMC_D10 / TIM1_CH3
- PE_14, //D71 - 1:FSMC_D11 / TIM1_CH4
- PE_15, //D72 - 1:FSMC_D12
- PD_8, //D73 - 1:FSMC_D13 / USART3_TX
- PD_9, //D74 - 1:FSMC_D14 / USART3_RX
- PD_10, //D75 - 1:FSMC_D15
- PD_11, //D76 - 1:FSMC_A16
- PD_12, //D77 - 1:FSMC_A17 / TIM4_CH1
- PD_13, //D78 - 1:FSMC_A18 / TIM4_CH2
- PD_14, //D79 - 1:FSMC_D0 / TIM4_CH3
- PD_15, //D80 - 1:FSMC_D1 / TIM4_CH4
- PD_0, //D81 - 1:FSMC_D2
- PD_1, //D82 - 1:FSMC_D3
- PD_3, //D83 - 1:FSMC_CLK
- PD_4, //D84 - 1:FSMC_NOE
- PD_5, //D85 - 1:USART2_TX
- PD_6, //D86 - 1:USART2_RX
- PD_7, //D87
- PE_0, //D88
- PE_1, //D89
- #endif
- #if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
- PF_0, //D90 - 1:FSMC_A0 / I2C2_SDA
- PF_1, //D91 - 1:FSMC_A1 / I2C2_SCL
- PF_2, //D92 - 1:FSMC_A2
- PF_11, //D93
- PF_12, //D94 - 1:FSMC_A6
- PF_13, //D95 - 1:FSMC_A7
- PF_14, //D96 - 1:FSMC_A8
- PF_15, //D97 - 1:FSMC_A9
- PG_0, //D98 - 1:FSMC_A10
- PG_1, //D99 - 1:FSMC_A11
- PG_2, //D100 - 1:FSMC_A12
- PG_3, //D101 - 1:FSMC_A13
- PG_4, //D102 - 1:FSMC_A14
- PG_5, //D103 - 1:FSMC_A15
- PG_6, //D104
- PG_7, //D105
- PG_8, //D106
- PG_9, //D107 - 1:USART6_RX
- PG_10, //D108 - 1:FSMC_NE3
- PG_11, //D109
- PG_12, //D110 - 1:FSMC_NE4
- PG_13, //D111 - 1:FSMC_A24
- PG_14, //D112 - 1:FSMC_A25 / USART6_TX
- PG_15, //D113
- #endif
- #if STM32F4X_PIN_NUM >= 176 //176 pins mcu, 140 gpio
- PI_8, //D114
- PI_9, //D115
- PI_10, //D116
- PI_11, //D117
- PH_2, //D118
- PH_3, //D119
- PH_4, //D120 - 1:I2C2_SCL
- PH_5, //D121 - 1:I2C2_SDA
- PH_6, //D122 - 1:TIM12_CH1
- PH_7, //D123 - 1:I2C3_SCL
- PH_8, //D124 - 1:I2C3_SDA
- PH_9, //D125 - 1:TIM12_CH2
- PH_10, //D126 - 1:TIM5_CH1
- PH_11, //D127 - 1:TIM5_CH2
- PH_12, //D128 - 1:TIM5_CH3
- PH_13, //D129
- PH_14, //D130
- PH_15, //D131
- PI_0, //D132 - 1:TIM5_CH4 / SPI2_NSS
- PI_1, //D133 - 1:SPI2_SCK
- PI_2, //D134 - 1:TIM8_CH4 /SPI2_MISO
- PI_3, //D135 - 1:SPI2_MOS
- PI_4, //D136
- PI_5, //D137 - 1:TIM8_CH1
- PI_6, //D138 - 1:TIM8_CH2
- PI_7, //D139 - 1:TIM8_CH3
- #endif
- };
- #ifdef __cplusplus
- }
- #endif
- // ------------------------
- #ifdef __cplusplus
- extern "C" {
- #endif
- /**
- * @brief System Clock Configuration
- * @param None
- * @retval None
- */
- WEAK void SystemClock_Config() {
- RCC_OscInitTypeDef RCC_OscInitStruct;
- RCC_ClkInitTypeDef RCC_ClkInitStruct;
- /**Configure the main internal regulator output voltage
- */
- __HAL_RCC_PWR_CLK_ENABLE();
- __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
- /**Initializes the CPU, AHB and APB busses clocks
- */
- RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
- RCC_OscInitStruct.HSEState = RCC_HSE_ON;
- RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
- RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
- RCC_OscInitStruct.PLL.PLLM = 8;
- RCC_OscInitStruct.PLL.PLLN = 336;
- RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
- RCC_OscInitStruct.PLL.PLLQ = 7;
- if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
- _Error_Handler(__FILE__, __LINE__);
- }
- /**Initializes the CPU, AHB and APB busses clocks
- */
- RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
- | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
- RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
- RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
- RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
- RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
- if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
- _Error_Handler(__FILE__, __LINE__);
- }
- /**Configure the Systick interrupt time
- */
- HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000);
- /**Configure the Systick
- */
- HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
- /* SysTick_IRQn interrupt configuration */
- HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
- }
- #ifdef __cplusplus
- }
- #endif
|