Clean up trailing spaces

Marlin/Configuration_adv.h

@@ -1689,7 +1689,7 @@
     // increasing the height the probe is raised to.
     // #define PTC_PROBE_RAISE 15U
 
-    // If the probe is outside of the defined range, use linear extrapolation using the closest 
+    // If the probe is outside of the defined range, use linear extrapolation using the closest
     // point and the PTC_LINEAR_EXTRAPOLATION'th next point. E.g. if set to 4 it will use data[0]
     // and data[4] to perform linear extrapolation for values below PTC_SAMPLE_START.
     // #define PTC_LINEAR_EXTRAPOLATION 4

Marlin/src/HAL/STM32F1/sdio.cpp

@@ -102,7 +102,7 @@ bool SDIO_ReadBlock_DMA(uint32_t blockAddress, uint8_t *data) {
   }
 
   while (!SDIO_GET_FLAG(SDIO_STA_DATAEND | SDIO_STA_TRX_ERROR_FLAGS)) { /* wait */ }
-  
+
   //If there were SDIO errors, do not wait DMA.
   if (SDIO->STA & SDIO_STA_TRX_ERROR_FLAGS) {
     SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
@@ -118,7 +118,7 @@ bool SDIO_ReadBlock_DMA(uint32_t blockAddress, uint8_t *data) {
     SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
     return false;
   }
-  
+
   dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
 
   if (SDIO->STA & SDIO_STA_RXDAVL) {

Marlin/src/feature/spindle_laser.h

@@ -233,7 +233,7 @@ public:
     // Inline modes of all other functions; all enable planner inline power control
     static inline void set_inline_enabled(const bool enable) {
       if (enable)
-        inline_power(cpwr_to_upwr(SPEED_POWER_STARTUP)); 
+        inline_power(cpwr_to_upwr(SPEED_POWER_STARTUP));
       else {
         isReady = false;
         unitPower = menuPower = 0;

Marlin/src/gcode/config/M200-M205.cpp

@@ -65,7 +65,7 @@
           SERIAL_ECHOLNPGM("?L value out of range (0-20).");
       }
     #endif
-    
+
     planner.calculate_volumetric_multipliers();
   }
 

Marlin/src/lcd/menu/menu_led.cpp

@@ -32,7 +32,7 @@
 
 #if ENABLED(LED_CONTROL_MENU)
   #include "../../feature/leds/leds.h"
-  
+
   #if ENABLED(LED_COLOR_PRESETS)
     void menu_led_presets() {
       START_MENU();
@@ -71,7 +71,7 @@
 
 #if ENABLED(CASE_LIGHT_MENU)
   #include "../../feature/caselight.h"
-  
+
   #if DISABLED(CASE_LIGHT_NO_BRIGHTNESS)
     void menu_case_light() {
       START_MENU();

Marlin/src/module/planner.cpp

@@ -2107,9 +2107,9 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
                             * TERN(HAS_MIXER_SYNC_CHANNEL, MIXING_STEPPERS, 1);
 
       if (cs > max_fr) NOMORE(speed_factor, max_fr / cs); //respect max feedrate on any movement (doesn't matter if E axes only or not)
-      
+
       #if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
-        const feedRate_t max_vfr = volumetric_extruder_feedrate_limit[extruder] 
+        const feedRate_t max_vfr = volumetric_extruder_feedrate_limit[extruder]
                                    * TERN(HAS_MIXER_SYNC_CHANNEL, MIXING_STEPPERS, 1);
 
         // TODO: Doesn't work properly for joined segments. Set MIN_STEPS_PER_SEGMENT 1 as workaround.

Marlin/src/module/planner.h

@@ -493,7 +493,7 @@ class Planner {
 
       // Update multipliers based on new diameter measurements
       static void calculate_volumetric_multipliers();
-  
+
       #if ENABLED(VOLUMETRIC_EXTRUDER_LIMIT)
         // Update pre calculated extruder feedrate limits based on volumetric values
         static void calculate_volumetric_extruder_limit(const uint8_t e);

Marlin/src/pins/stm32f4/pins_RUMBA32_AUS3D.h

@@ -31,7 +31,7 @@
 #define BOARD_INFO_NAME "RUMBA32"
 
 #if NO_EEPROM_SELECTED
-  #if MB(RUMBA32_V1_0) 
+  #if MB(RUMBA32_V1_0)
     #define FLASH_EEPROM_EMULATION
     #define MARLIN_EEPROM_SIZE 0x1000             // 4KB
   #elif MB(RUMBA32_V1_1)

buildroot/share/PlatformIO/variants/CHITU_F103/board.cpp

@@ -71,19 +71,19 @@ void boardInit(void) {
 
 extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
   /*
-    gpio_dev *gpio_device;      GPIO device 
+    gpio_dev *gpio_device;      GPIO device
     timer_dev *timer_device;    Pin's timer device, if any.
-    const adc_dev *adc_device;  ADC device, if any. 
-    uint8 gpio_bit;             Pin's GPIO port bit. 
-    uint8 timer_channel;        Timer channel, or 0 if none. 
-    uint8 adc_channel;          Pin ADC channel, or ADCx if none. 
+    const adc_dev *adc_device;  ADC device, if any.
+    uint8 gpio_bit;             Pin's GPIO port bit.
+    uint8 timer_channel;        Timer channel, or 0 if none.
+    uint8 adc_channel;          Pin ADC channel, or ADCx if none.
   */
 
   {&gpioa, &timer2, &adc1,  0, 1,    0}, /* PA0 */
   {&gpioa, &timer2, &adc1,  1, 2,    1}, /* PA1 */
   {&gpioa, &timer2, &adc1,  2, 3,    2}, /* PA2 */
   {&gpioa, &timer2, &adc1,  3, 4,    3}, /* PA3 */
-  {&gpioa,   NULL, &adc1,  4, 0,    4}, /* PA4 */	
+  {&gpioa,   NULL, &adc1,  4, 0,    4}, /* PA4 */
   {&gpioa,   NULL, &adc1,  5, 0,    5}, /* PA5 */
   {&gpioa, &timer3, &adc1,  6, 1,    6}, /* PA6 */
   {&gpioa, &timer3, &adc1,  7, 2,    7}, /* PA7 */
@@ -91,7 +91,7 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
   {&gpioa, &timer1, NULL,  9, 2, ADCx}, /* PA9 */
   {&gpioa, &timer1, NULL, 10, 3, ADCx}, /* PA10 */
   {&gpioa,   NULL, NULL, 11, 0, ADCx}, /* PA11 */
-  {&gpioa,   NULL, NULL, 12, 0, ADCx}, /* PA12 */	
+  {&gpioa,   NULL, NULL, 12, 0, ADCx}, /* PA12 */
   {&gpioa,   NULL, NULL, 13, 0, ADCx}, /* PA13 */
   {&gpioa,   NULL, NULL, 14, 0, ADCx}, /* PA14 */
   {&gpioa,   NULL, NULL, 15, 0, ADCx}, /* PA15 */
@@ -120,13 +120,13 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
   {&gpioc,   NULL, &adc1,  3, 0,   13}, /* PC3 */
   {&gpioc,   NULL, &adc1,  4, 0,   14}, /* PC4 */
   {&gpioc,   NULL, &adc1,  5, 0,   15}, /* PC5 */
-  {&gpioc, &timer8, NULL,  6, 1, ADCx}, /* PC6 */	
+  {&gpioc, &timer8, NULL,  6, 1, ADCx}, /* PC6 */
   {&gpioc, &timer8, NULL,  7, 2, ADCx}, /* PC7 */
   {&gpioc, &timer8, NULL,  8, 3, ADCx}, /* PC8 */
   {&gpioc, &timer8, NULL,  9, 4, ADCx}, /* PC9 */
   {&gpioc,   NULL, NULL, 10, 0, ADCx}, /* PC10 UART4_TX/SDIO_D2 */
   {&gpioc,   NULL, NULL, 11, 0, ADCx}, /* PC11 UART4_RX/SDIO_D3 */
-  {&gpioc,   NULL, NULL, 12, 0, ADCx}, /* PC12 UART5_TX/SDIO_CK */	
+  {&gpioc,   NULL, NULL, 12, 0, ADCx}, /* PC12 UART5_TX/SDIO_CK */
   {&gpioc,   NULL, NULL, 13, 0, ADCx}, /* PC13 TAMPER-RTC */
   {&gpioc,   NULL, NULL, 14, 0, ADCx}, /* PC14 OSC32_IN */
   {&gpioc,   NULL, NULL, 15, 0, ADCx}, /* PC15 OSC32_OUT */
@@ -134,7 +134,7 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
 	{&gpiod,   NULL, NULL,   0, 0, ADCx} , /* PD0 OSC_IN */
 	{&gpiod,   NULL, NULL,   1, 0, ADCx} , /* PD1  OSC_OUT */
 	{&gpiod,   NULL, NULL,   2, 0, ADCx} , /* PD2  TIM3_ETR/UART5_RX SDIO_CMD */
-	
+
 	{&gpiod,   NULL, NULL,   3, 0, ADCx} , /* PD3  FSMC_CLK */
 	{&gpiod,   NULL, NULL,   4, 0, ADCx} , /* PD4  FSMC_NOE */
 	{&gpiod,   NULL, NULL,   5, 0, ADCx} , /* PD5  FSMC_NWE */
@@ -145,10 +145,10 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
 	{&gpiod,   NULL, NULL,  10, 0, ADCx} , /* PD10  FSMC_D15 */
 	{&gpiod,   NULL, NULL,  11, 0, ADCx} , /* PD11  FSMC_A16 */
 	{&gpiod,   NULL, NULL,  12, 0, ADCx} , /* PD12  FSMC_A17 */
-	{&gpiod,   NULL, NULL,  13, 0, ADCx} , /* PD13  FSMC_A18 */	
+	{&gpiod,   NULL, NULL,  13, 0, ADCx} , /* PD13  FSMC_A18 */
 	{&gpiod,   NULL, NULL,  14, 0, ADCx} , /* PD14  FSMC_D0 */
 	{&gpiod,   NULL, NULL,  15, 0, ADCx} , /* PD15  FSMC_D1 */
-	
+
 	{&gpioe,   NULL, NULL,   0, 0, ADCx} , /* PE0   */
 	{&gpioe,   NULL, NULL,   1, 0, ADCx} , /* PE1   */
 	{&gpioe,   NULL, NULL,   2, 0, ADCx} , /* PE2   */
@@ -162,9 +162,9 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
 	{&gpioe,   NULL, NULL,  10, 0, ADCx} , /* PE10  */
 	{&gpioe,   NULL, NULL,  11, 0, ADCx} , /* PE11  */
 	{&gpioe,   NULL, NULL,  12, 0, ADCx} , /* PE12  */
-	{&gpioe,   NULL, NULL,  13, 0, ADCx} , /* PE13  */	
+	{&gpioe,   NULL, NULL,  13, 0, ADCx} , /* PE13  */
 	{&gpioe,   NULL, NULL,  14, 0, ADCx} , /* PE14  */
-	{&gpioe,   NULL, NULL,  15, 0, ADCx} , /* PE15  */	
+	{&gpioe,   NULL, NULL,  15, 0, ADCx} , /* PE15  */
 
 	{&gpiof,   NULL, NULL,   0, 0, ADCx} , /* PF0   */
 	{&gpiof,   NULL, NULL,   1, 0, ADCx} , /* PF1   */
@@ -179,10 +179,10 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
 	{&gpiof,   NULL, NULL,  10, 0, ADCx} , /* PF10  */
 	{&gpiof,   NULL, NULL,  11, 0, ADCx} , /* PF11  */
 	{&gpiof,   NULL, NULL,  12, 0, ADCx} , /* PF12  */
-	{&gpiof,   NULL, NULL,  13, 0, ADCx} , /* PF13  */	
+	{&gpiof,   NULL, NULL,  13, 0, ADCx} , /* PF13  */
 	{&gpiof,   NULL, NULL,  14, 0, ADCx} , /* PF14  */
-	{&gpiof,   NULL, NULL,  15, 0, ADCx} , /* PF15  */		
-	
+	{&gpiof,   NULL, NULL,  15, 0, ADCx} , /* PF15  */
+
 	{&gpiog,   NULL, NULL,   0, 0, ADCx} , /* PG0   */
 	{&gpiog,   NULL, NULL,   1, 0, ADCx} , /* PG1   */
 	{&gpiog,   NULL, NULL,   2, 0, ADCx} , /* PG2   */
@@ -196,9 +196,9 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS] = {
 	{&gpiog,   NULL, NULL,  10, 0, ADCx} , /* PG10  */
 	{&gpiog,   NULL, NULL,  11, 0, ADCx} , /* PG11  */
 	{&gpiog,   NULL, NULL,  12, 0, ADCx} , /* PG12  */
-	{&gpiog,   NULL, NULL,  13, 0, ADCx} , /* PG13  */	
+	{&gpiog,   NULL, NULL,  13, 0, ADCx} , /* PG13  */
 	{&gpiog,   NULL, NULL,  14, 0, ADCx} , /* PG14  */
-	{&gpiog,   NULL, NULL,  15, 0, ADCx}   /* PG15  */		
+	{&gpiog,   NULL, NULL,  15, 0, ADCx}   /* PG15  */
 };
 
 /*  Basically everything that is defined as having a timer us PWM */

buildroot/share/PlatformIO/variants/CHITU_F103/ld/stm32f103z_dfu.ld

@@ -1,5 +1,5 @@
 /*
- * libmaple linker script 
+ * libmaple linker script
  *
  * This build puts .text (and .rodata) in Flash, and
  * .data/.bss/heap (of course) in SRAM, but links starting at the