🧑‍💻 Optimize PlatformIO source filtering (#25332)

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

Marlin/src/HAL/LPC1768/HAL.h

@@ -165,7 +165,9 @@ int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
 // Defines
 // ------------------------
 
-#define PLATFORM_M997_SUPPORT
+#ifndef PLATFORM_M997_SUPPORT
+  #define PLATFORM_M997_SUPPORT
+#endif
 void flashFirmware(const int16_t);
 
 #define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment

Marlin/src/HAL/LPC1768/tft/tft_spi.cpp

@@ -20,6 +20,8 @@
  *
  */
 
+#ifdef TARGET_LPC1768
+
 #include "../../../inc/MarlinConfig.h"
 
 #if HAS_SPI_TFT
@@ -143,3 +145,4 @@ void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Coun
 }
 
 #endif // HAS_SPI_TFT
+#endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/tft/xpt2046.cpp

@@ -20,6 +20,8 @@
  *
  */
 
+#ifdef TARGET_LPC1768
+
 #include "../../../inc/MarlinConfig.h"
 
 #if HAS_TFT_XPT2046 || HAS_RES_TOUCH_BUTTONS
@@ -130,4 +132,5 @@ uint16_t XPT2046::SoftwareIO(uint16_t data) {
   return result;
 }
 
-#endif // HAS_TFT_XPT2046
+#endif // HAS_TFT_XPT2046 || HAS_RES_TOUCH_BUTTONS
+#endif // TARGET_LPC1768

Marlin/src/HAL/STM32/HAL.h

@@ -175,7 +175,9 @@ typedef libServo hal_servo_t;
   #define JTAGSWD_RESET() AFIO_DBGAFR_CONFIG(AFIO_MAPR_SWJ_CFG_RESET); // Reset: FULL SWD+JTAG
 #endif
 
-#define PLATFORM_M997_SUPPORT
+#ifndef PLATFORM_M997_SUPPORT
+  #define PLATFORM_M997_SUPPORT
+#endif
 void flashFirmware(const int16_t);
 
 // Maple Compatibility

Marlin/src/HAL/STM32F1/HAL.h

@@ -205,7 +205,9 @@ void analogWrite(const pin_t pin, int pwm_val8); // PWM only! mul by 257 in mapl
 #define JTAG_DISABLE()    afio_cfg_debug_ports(AFIO_DEBUG_SW_ONLY)
 #define JTAGSWD_DISABLE() afio_cfg_debug_ports(AFIO_DEBUG_NONE)
 
-#define PLATFORM_M997_SUPPORT
+#ifndef PLATFORM_M997_SUPPORT
+  #define PLATFORM_M997_SUPPORT
+#endif
 void flashFirmware(const int16_t);
 
 #define HAL_CAN_SET_PWM_FREQ      // This HAL supports PWM Frequency adjustment

Marlin/src/HAL/shared/fauxpins.h

@@ -0,0 +1,367 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+//
+// Faux pins for Dependency Check
+//
+
+//
+// STM32 Pin Names
+//
+#define PA0  0x10
+#define PA1  0x11
+#define PA2  0x12
+#define PA3  0x13
+#define PA4  0x14
+#define PA5  0x15
+#define PA6  0x16
+#define PA7  0x17
+#define PA8  0x18
+#define PA9  0x19
+#define PA10 0x1A
+#define PA11 0x1B
+#define PA12 0x1C
+#define PA13 0x1D
+#define PA14 0x1E
+#define PA15 0x1F
+
+#define PB0  0x20
+#define PB1  0x21
+#define PB2  0x22
+#define PB3  0x23
+#define PB4  0x24
+#define PB5  0x25
+#define PB6  0x26
+#define PB7  0x27
+#define PB8  0x28
+#define PB9  0x29
+#define PB10 0x2A
+#define PB11 0x2B
+#define PB12 0x2C
+#define PB13 0x2D
+#define PB14 0x2E
+#define PB15 0x2F
+
+#define PC0  0x30
+#define PC1  0x31
+#define PC2  0x32
+#define PC3  0x33
+#define PC4  0x34
+#define PC5  0x35
+#define PC6  0x36
+#define PC7  0x37
+#define PC8  0x38
+#define PC9  0x39
+#define PC10 0x3A
+#define PC11 0x3B
+#define PC12 0x3C
+#define PC13 0x3D
+#define PC14 0x3E
+#define PC15 0x3F
+
+#define PD0  0x40
+#define PD1  0x41
+#define PD2  0x42
+#define PD3  0x43
+#define PD4  0x44
+#define PD5  0x45
+#define PD6  0x46
+#define PD7  0x47
+#define PD8  0x48
+#define PD9  0x49
+#define PD10 0x4A
+#define PD11 0x4B
+#define PD12 0x4C
+#define PD13 0x4D
+#define PD14 0x4E
+#define PD15 0x4F
+
+#define PE0  0x50
+#define PE1  0x51
+#define PE2  0x52
+#define PE3  0x53
+#define PE4  0x54
+#define PE5  0x55
+#define PE6  0x56
+#define PE7  0x57
+#define PE8  0x58
+#define PE9  0x59
+#define PE10 0x5A
+#define PE11 0x5B
+#define PE12 0x5C
+#define PE13 0x5D
+#define PE14 0x5E
+#define PE15 0x5F
+
+#define PF0  0x60
+#define PF1  0x61
+#define PF2  0x62
+#define PF3  0x63
+#define PF4  0x64
+#define PF5  0x65
+#define PF6  0x66
+#define PF7  0x67
+#define PF8  0x68
+#define PF9  0x69
+#define PF10 0x6A
+#define PF11 0x6B
+#define PF12 0x6C
+#define PF13 0x6D
+#define PF14 0x6E
+#define PF15 0x6F
+
+#define PG0  0x70
+#define PG1  0x71
+#define PG2  0x72
+#define PG3  0x73
+#define PG4  0x74
+#define PG5  0x75
+#define PG6  0x76
+#define PG7  0x77
+#define PG8  0x78
+#define PG9  0x79
+#define PG10 0x7A
+#define PG11 0x7B
+#define PG12 0x7C
+#define PG13 0x7D
+#define PG14 0x7E
+#define PG15 0x7F
+
+#define PH0  0x80
+#define PH1  0x81
+#define PH2  0x82
+#define PH3  0x83
+#define PH4  0x84
+#define PH5  0x85
+#define PH6  0x86
+#define PH7  0x87
+#define PH8  0x88
+#define PH9  0x89
+#define PH10 0x8A
+#define PH11 0x8B
+#define PH12 0x8C
+#define PH13 0x8D
+#define PH14 0x8E
+#define PH15 0x8F
+
+#define PI0  0x90
+#define PI1  0x91
+#define PI2  0x92
+#define PI3  0x93
+#define PI4  0x94
+#define PI5  0x95
+#define PI6  0x96
+#define PI7  0x97
+#define PI8  0x98
+#define PI9  0x99
+#define PI10 0x9A
+#define PI11 0x9B
+#define PI12 0x9C
+#define PI13 0x9D
+#define PI14 0x9E
+#define PI15 0x9F
+
+#define PJ0  0xA0
+#define PJ1  0xA1
+#define PJ2  0xA2
+#define PJ3  0xA3
+#define PJ4  0xA4
+#define PJ5  0xA5
+#define PJ6  0xA6
+#define PJ7  0xA7
+#define PJ8  0xA8
+#define PJ9  0xA9
+#define PJ10 0xAA
+#define PJ11 0xAB
+#define PJ12 0xAC
+#define PJ13 0xAD
+#define PJ14 0xAE
+#define PJ15 0xAF
+
+//
+// LPC Pin Names
+//
+#define P0_0  100
+#define P0_1  101
+#define P0_2  102
+#define P0_3  103
+#define P0_4  104
+#define P0_5  105
+#define P0_6  106
+#define P0_7  107
+#define P0_8  108
+#define P0_9  109
+#define P0_10 110
+#define P0_11 111
+#define P0_12 112
+#define P0_13 113
+#define P0_14 114
+#define P0_15 115
+#define P0_16 116
+#define P0_17 117
+#define P0_18 118
+#define P0_19 119
+#define P0_20 120
+#define P0_21 121
+#define P0_22 122
+#define P0_23 123
+#define P0_24 124
+#define P0_25 125
+#define P0_26 126
+#define P0_27 127
+#define P0_28 128
+#define P0_29 129
+#define P0_30 130
+#define P0_31 131
+
+#define P1_0  200
+#define P1_1  201
+#define P1_2  202
+#define P1_3  203
+#define P1_4  204
+#define P1_5  205
+#define P1_6  206
+#define P1_7  207
+#define P1_8  208
+#define P1_9  209
+#define P1_10 210
+#define P1_11 211
+#define P1_12 212
+#define P1_13 213
+#define P1_14 214
+#define P1_15 215
+#define P1_16 216
+#define P1_17 217
+#define P1_18 218
+#define P1_19 219
+#define P1_20 220
+#define P1_21 221
+#define P1_22 222
+#define P1_23 223
+#define P1_24 224
+#define P1_25 225
+#define P1_26 226
+#define P1_27 227
+#define P1_28 228
+#define P1_29 229
+#define P1_30 230
+#define P1_31 231
+
+#define P2_0  300
+#define P2_1  301
+#define P2_2  302
+#define P2_3  303
+#define P2_4  304
+#define P2_5  305
+#define P2_6  306
+#define P2_7  307
+#define P2_8  308
+#define P2_9  309
+#define P2_10 310
+#define P2_11 311
+#define P2_12 312
+#define P2_13 313
+#define P2_14 314
+#define P2_15 315
+#define P2_16 316
+#define P2_17 317
+#define P2_18 318
+#define P2_19 319
+#define P2_20 320
+#define P2_21 321
+#define P2_22 322
+#define P2_23 323
+#define P2_24 324
+#define P2_25 325
+#define P2_26 326
+#define P2_27 327
+#define P2_28 328
+#define P2_29 329
+#define P2_30 330
+#define P2_31 331
+
+#define P3_0  400
+#define P3_1  401
+#define P3_2  402
+#define P3_3  403
+#define P3_4  404
+#define P3_5  405
+#define P3_6  406
+#define P3_7  407
+#define P3_8  408
+#define P3_9  409
+#define P3_10 410
+#define P3_11 411
+#define P3_12 412
+#define P3_13 413
+#define P3_14 414
+#define P3_15 415
+#define P3_16 416
+#define P3_17 417
+#define P3_18 418
+#define P3_19 419
+#define P3_20 420
+#define P3_21 421
+#define P3_22 422
+#define P3_23 423
+#define P3_24 424
+#define P3_25 425
+#define P3_26 426
+#define P3_27 427
+#define P3_28 428
+#define P3_29 429
+#define P3_30 430
+#define P3_31 431
+
+#define P4_0  500
+#define P4_1  501
+#define P4_2  502
+#define P4_3  503
+#define P4_4  504
+#define P4_5  505
+#define P4_6  506
+#define P4_7  507
+#define P4_8  508
+#define P4_9  509
+#define P4_10 510
+#define P4_11 511
+#define P4_12 512
+#define P4_13 513
+#define P4_14 514
+#define P4_15 515
+#define P4_16 516
+#define P4_17 517
+#define P4_18 518
+#define P4_19 519
+#define P4_20 520
+#define P4_21 521
+#define P4_22 522
+#define P4_23 523
+#define P4_24 524
+#define P4_25 525
+#define P4_26 526
+#define P4_27 527
+#define P4_28 528
+#define P4_29 529
+#define P4_30 530
+#define P4_31 531

Marlin/src/gcode/control/M993_M994.cpp

@@ -22,7 +22,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if ALL(SPI_FLASH, HAS_MEDIA, MARLIN_DEV_MODE)
+#if SPI_FLASH_BACKUP
 
 #include "../gcode.h"
 #include "../../sd/cardreader.h"
@@ -85,4 +85,4 @@ void GcodeSuite::M994() {
   card.closefile();
 }
 
-#endif // SPI_FLASH && HAS_MEDIA && MARLIN_DEV_MODE
+#endif // SPI_FLASH_BACKUP

Marlin/src/gcode/gcode.cpp

@@ -1061,7 +1061,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) {
         case 422: M422(); break;                                  // M422: Set Z Stepper automatic alignment position using probe
       #endif
 
-      #if ALL(SPI_FLASH, HAS_MEDIA, MARLIN_DEV_MODE)
+      #if SPI_FLASH_BACKUP
         case 993: M993(); break;                                  // M993: Backup SPI Flash to SD
         case 994: M994(); break;                                  // M994: Load a Backup from SD to SPI Flash
       #endif

Marlin/src/gcode/gcode.h

@@ -1207,7 +1207,7 @@ private:
     static void M995();
   #endif
 
-  #if BOTH(SPI_FLASH, HAS_MEDIA)
+  #if SPI_FLASH_BACKUP
     static void M993();
     static void M994();
   #endif