123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126 |
- /*
- * RTP packetization for Xiph audio and video
- * Copyright (c) 2010 Josh Allmann
- *
- * This file is part of Libav.
- *
- * Libav is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * Libav is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with Libav; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
- #include "avformat.h"
- #include "rtpenc.h"
- /**
- * Packetize Xiph frames into RTP according to
- * RFC 5215 (Vorbis) and the Theora RFC draft.
- * (http://svn.xiph.org/trunk/theora/doc/draft-ietf-avt-rtp-theora-00.txt)
- */
- void ff_rtp_send_xiph(AVFormatContext *s1, const uint8_t *buff, int size)
- {
- RTPMuxContext *s = s1->priv_data;
- int max_pkt_size, xdt, frag;
- uint8_t *q;
- max_pkt_size = s->max_payload_size;
- // set xiph data type
- switch (*buff) {
- case 0x01: // vorbis id
- case 0x05: // vorbis setup
- case 0x80: // theora header
- case 0x82: // theora tables
- xdt = 1; // packed config payload
- break;
- case 0x03: // vorbis comments
- case 0x81: // theora comments
- xdt = 2; // comment payload
- break;
- default:
- xdt = 0; // raw data payload
- break;
- }
- // Set ident.
- // Probably need a non-fixed way of generating
- // this, but it has to be done in SDP and passed in from there.
- q = s->buf;
- *q++ = (RTP_XIPH_IDENT >> 16) & 0xff;
- *q++ = (RTP_XIPH_IDENT >> 8) & 0xff;
- *q++ = (RTP_XIPH_IDENT ) & 0xff;
- // set fragment
- // 0 - whole frame (possibly multiple frames)
- // 1 - first fragment
- // 2 - fragment continuation
- // 3 - last fragmement
- frag = size <= max_pkt_size ? 0 : 1;
- if (!frag && !xdt) { // do we have a whole frame of raw data?
- uint8_t *end_ptr = s->buf + 6 + max_pkt_size; // what we're allowed to write
- uint8_t *ptr = s->buf_ptr + 2 + size; // what we're going to write
- int remaining = end_ptr - ptr;
- assert(s->num_frames <= s->max_frames_per_packet);
- if ((s->num_frames > 0 && remaining < 0) ||
- s->num_frames == s->max_frames_per_packet) {
- // send previous packets now; no room for new data
- ff_rtp_send_data(s1, s->buf, s->buf_ptr - s->buf, 0);
- s->num_frames = 0;
- }
- // buffer current frame to send later
- if (0 == s->num_frames) s->timestamp = s->cur_timestamp;
- s->num_frames++;
- // Set packet header. Normally, this is OR'd with frag and xdt,
- // but those are zero, so omitted here
- *q++ = s->num_frames;
- if (s->num_frames > 1) q = s->buf_ptr; // jump ahead if needed
- *q++ = (size >> 8) & 0xff;
- *q++ = size & 0xff;
- memcpy(q, buff, size);
- q += size;
- s->buf_ptr = q;
- return;
- } else if (s->num_frames) {
- // immediately send buffered frames if buffer is not raw data,
- // or if current frame is fragmented.
- ff_rtp_send_data(s1, s->buf, s->buf_ptr - s->buf, 0);
- }
- s->timestamp = s->cur_timestamp;
- s->num_frames = 0;
- s->buf_ptr = q;
- while (size > 0) {
- int len = (!frag || frag == 3) ? size : max_pkt_size;
- q = s->buf_ptr;
- // set packet headers
- *q++ = (frag << 6) | (xdt << 4); // num_frames = 0
- *q++ = (len >> 8) & 0xff;
- *q++ = len & 0xff;
- // set packet body
- memcpy(q, buff, len);
- q += len;
- buff += len;
- size -= len;
- ff_rtp_send_data(s1, s->buf, q - s->buf, 0);
- frag = size <= max_pkt_size ? 3 : 2;
- }
- }
|