###############
# AUTHOR: Szabolcs Hornyak / design85@gmail.com
# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-genius/
###############

## Artillery Hornet printer profile is based on PR https://github.com/slic3r/slic3r-profiles/pull/14 created by https://github.com/newbeetle

# Print profiles for the Artillery printers.

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Artillery
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.0.8
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Artillery/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

#############
## PRINTER ##
#############

[printer_model:X1]
name = Artillery Sidewinder X1
variants = 0.4
technology = FFF
bed_model = bed-x1.stl
bed_texture = bed-x1.png
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery

[printer_model:Genius]
name = Artillery Genius
variants = 0.4
technology = FFF
bed_model = bed-genius.stl
bed_texture = bed-genius.png
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery

[printer_model:Hornet]
name = Artillery Hornet
variants = 0.4
technology = FFF
bed_model = bed-hornet.stl
bed_texture = bed-hornet.png
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery

[printer_model:X3 Plus]
name = Artillery Sidewinder X3 Plus
variants = 0.4
technology = FFF
bed_model = bed-x3-plus.stl
bed_texture = bed-x1.png
default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3

[printer_model:X3 Pro]
name = Artillery Sidewinder X3 Pro
variants = 0.4
technology = FFF
bed_model = bed-x3-pro.stl
bed_texture = bed-x1.png
default_materials = Artillery ABS @X3; Artillery PETG @X3; Artillery PLA @X3; Artillery PLA HS @X3; Artillery PLA Silk @X3; Artillery TPU @X3

[printer_model:X4 Plus]
name = Artillery Sidewinder X4 Plus
variants = 0.4
technology = FFF
bed_model = bed-x4-plus.stl
bed_texture = bed-x1.png
default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4

[printer_model:X4 Pro]
name = Artillery Sidewinder X4 Pro
variants = 0.4
technology = FFF
bed_model = bed-x4-pro.stl
bed_texture = bed-x1.png
default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4

[printer_model:X4 Max]
name = Artillery Sidewinder X4 Max
variants = 0.4
technology = FFF
bed_model = bed-x4-max.stl
bed_texture = bed-x1.png
default_materials = Artillery ABS @X4; Artillery PETG @X4; Artillery PLA & PLA HS @X4; Artillery PLA+ @X4; Artillery PLA Silk @X4; Artillery TPU @X4

# Common printer preset
[printer:*common*]
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
between_objects_gcode = 
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = Generic PLA @Artillery
default_print_profile = 0.20mm NORMAL @Artillery
deretract_speed = 0
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = marlin
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 1000,1000
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 1.5,1.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.25
max_print_height = 250
min_layer_height = 0.07
nozzle_diameter = 0.4
pause_print_gcode = 
printer_technology = FFF
remaining_times = 0
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 4
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 380
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
silent_mode = 0
single_extruder_multi_material = 0
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
end_gcode = G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+120, max_print_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0 ; deactivate idle timeout\nM84 ; disable motors\n

[printer:*common_STOCK_FW*]
inherits = *common*
start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S[first_layer_temperature] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}

[printer:*common_UPD_FW*]
inherits = *common*
start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12 ; K factor\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S[first_layer_temperature] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}

[printer:*bowden*]
inherits = *common_STOCK_FW*
retract_length = 5
retract_lift = 0.1
retract_before_wipe = 50%
default_filament_profile = Generic PLA @Artillery

[printer:*0.4nozzle*]
nozzle_diameter = 0.4
max_layer_height = 0.32
min_layer_height = 0.04
printer_variant = 0.4
default_print_profile = 0.20mm NORMAL @Artillery

[printer:*common_X3_X4*]
autoemit_temperature_commands = 1
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
deretract_speed = 0
extra_loading_move = -2
extruder_colour = #FFFF00
extruder_offset = 0x0
high_current_on_filament_swap = 0
host_type = prusalink
inherits = 
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 10000,5000
machine_max_acceleration_extruding = 10000,1250
machine_max_acceleration_retracting = 10000,1250
machine_max_jerk_z = 0.2,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.25
min_layer_height = 0.07
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_settings_id = 
printer_technology = FFF
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 0
retract_before_wipe = 0%
retract_layer_change = 0
retract_length = 0.8
retract_length_toolchange = 10
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 380
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
silent_mode = 1
single_extruder_multi_material = 0
template_custom_gcode = 
thumbnails = 256x256
thumbnails_format = PNG
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 0
z_offset = 0
start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM140 S[first_layer_bed_temperature] ; start bed heating\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\n\n; Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; perform bed leveling\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Wait for final heating\nG1 Z10 F3000 ; move z up little to prevent scratching of surface\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\n\n; Сlean nozzle\nG92 E0 ; reset extruder\nG1 X150 Y{print_bed_size[1]-0.25} Z0.25 F5000.0 ; move to start position\nG1 X100 Y{print_bed_size[1]-0.25} Z0.25 F1500.0 E30 ; draw the first line\nG1 Z10 F3000 ; move z up little to prevent scratching\nG12 C2 ; clean nozzle\nG1 X25 Y{print_bed_size[1]-0.5} Z0.25 F5000.0 ; move to side a little\nG1 X90 Y{print_bed_size[1]-0.5} Z0.25 F1500.0 E15 ; draw the second line\nG92 E0 ; reset extruder\n\nM221 S{if layer_height<0.075}100{else}95{endif}\n

[printer:*common_X3*]
inherits = *common_X3_X4*
default_filament_profile = Artillery PLA @X3
default_print_profile = X3 Default (0.20mm) @Artillery
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
end_gcode = ; After G-Code\nG4 ; wait\nG92 E0 ; prepare to retract\nG1 E-1.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+120, max_print_height)}{endif} ; move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM84 ; disable motors\n
gcode_flavor = marlin2
machine_max_acceleration_travel = 3000,1250
machine_max_acceleration_x = 3000,1000
machine_max_acceleration_y = 3000,1000
machine_max_acceleration_z = 500,200
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 500,200
machine_max_feedrate_y = 500,200
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 10,10
machine_max_jerk_y = 10,10
retract_before_travel = 2
retract_speed = 35

[printer:*common_X4*]
inherits = *common_X3_X4*
default_filament_profile = Artillery PLA & PLA HS @X4
before_layer_gcode = 
layer_gcode = 
gcode_flavor = klipper
machine_max_acceleration_travel = 1500,1250
machine_max_acceleration_x = 10000,1000
machine_max_acceleration_y = 10000,1000
machine_max_acceleration_z = 200,200
machine_max_feedrate_x = 500,500
machine_max_feedrate_y = 500,500
printer_notes = 
retract_before_travel = 1.5
retract_speed = 35

[printer:Artillery Sidewinder X1]
inherits = *common_STOCK_FW*
renamed_from = "Sidewinder X1"
printer_model = X1
printer_variant = 0.4
bed_shape = 0x0,300x0,300x300,0x300
max_print_height = 400
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1

[printer:Artillery Sidewinder X1 BL-TOUCH]
inherits = *common_UPD_FW*
renamed_from = "Sidewinder X1 BL-TOUCH"
printer_model = X1
printer_variant = 0.4
bed_shape = 0x0,300x0,300x300,0x300
max_print_height = 400
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1

[printer:Artillery Genius]
inherits = *common_STOCK_FW*
renamed_from = "Genius"
printer_model = Genius
printer_variant = 0.4
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 250
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius

[printer:Artillery Genius BL-TOUCH]
inherits = *common_UPD_FW*
renamed_from = "Genius BL-TOUCH"
printer_model = Genius
printer_variant = 0.4
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 250
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius

[printer:Artillery Hornet]
inherits = *bowden*
printer_model = Hornet
printer_variant = 0.4
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 250
machine_limits_usage = time_estimate_only
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Hornet\nPRINTER_HAS_Bowden

[printer:Artillery Sidewinder X3 Plus]
inherits = *common_X3*
printer_model = X3 Plus
bed_shape = 0x0,300x0,300x300,0x300
max_print_height = 400
printer_notes = 

[printer:Artillery Sidewinder X3 Pro]
inherits = *common_X3*
printer_model = X3 Pro
bed_shape = 0x0,240x0,240x240,0x240
max_print_height = 260
printer_notes = 

[printer:Artillery Sidewinder X4 Plus]
inherits = *common_X4*
printer_model = X4 Plus
bed_shape = 0x0,300x0,300x300,0x300
default_print_profile = ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery
machine_max_feedrate_e = 100,120
machine_max_feedrate_z = 13,12
machine_max_jerk_e = 10,2.5
machine_max_jerk_x = 20,10
machine_max_jerk_y = 20,10
max_print_height = 400
end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X5 Y280 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z

[printer:Artillery Sidewinder X4 Pro]
inherits = *common_X4*
printer_model = X4 Pro
bed_shape = 0x0,240x0,240x240,0x240
default_print_profile = ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery
machine_max_feedrate_e = 120,120
machine_max_feedrate_z = 13,13
machine_max_jerk_e = 2.5,2.5
machine_max_jerk_x = 10,10
machine_max_jerk_y = 10,10
max_print_height = 260
end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X5 Y220 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z

[printer:Artillery Sidewinder X4 Max]
inherits = *common_X4*
printer_model = X4 Max
bed_shape = 0x0,500x0,500x500,0x500
default_print_profile = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery
machine_max_feedrate_e = 100,120
machine_max_feedrate_z = 13,12
machine_max_jerk_e = 10,2.5
machine_max_jerk_x = 20,10
machine_max_jerk_y = 20,10
max_print_height = 500
end_gcode = G91 ;Relative positioning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X5 Y480 F3000;\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z

###########
## PRINT ##'
###########
# Common print preset
[print:*common*]
# V2.2 #
#bottom_fill_pattern = rectilinear
#top_fill_pattern = rectilinear
#fill_pattern = cubic
# V2.3 #
top_fill_pattern = monotonic
bottom_fill_pattern = monotonic
fill_pattern = adaptivecubic

avoid_crossing_perimeters = 0
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.78
bridge_speed = 20
# brim_width = 5
bottom_solid_min_thickness = 1.2
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 25
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 25
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 15%
first_layer_acceleration = 500
first_layer_extrusion_width = 0.42
first_layer_height = 150%
first_layer_speed = 20
gap_fill_speed = 30
gcode_comments = 1
gcode_label_objects = 1
infill_acceleration = 1000
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 50
interface_shells = 0
max_print_speed = 150
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
overhangs = 1
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
perimeters = 3
perimeter_acceleration = 800
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 45
post_process = 
print_settings_id = 
raft_layers = 0
resolution = 0
seam_position = nearest
single_extruder_multi_material_priming = 0
skirts = 1
skirt_distance = 6
skirt_height = 1
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 50
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 55
support_material_with_sheath = 0
support_material_xy_spacing = 50%
thin_walls = 1
travel_speed = 130
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 30
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 125
xy_size_compensation = 0

[print:*0.08mm*]
inherits = *common*
default_acceleration = 500
layer_height = 0.08
perimeters = 3
bottom_solid_layers = 9
top_solid_layers = 11

[print:*0.10mm*]
inherits = *common*
default_acceleration = 500
layer_height = 0.1
perimeters = 3
bottom_solid_layers = 7
top_solid_layers = 9

[print:*0.12mm*]
inherits = *common*
default_acceleration = 500
layer_height = 0.12
perimeters = 3
bottom_solid_layers = 6
top_solid_layers = 7

[print:*0.16mm*]
inherits = *common*
layer_height = 0.16
bottom_solid_layers = 5
top_solid_layers = 7

[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
bottom_solid_layers = 4
top_solid_layers = 5

[print:*0.24mm*]
inherits = *common*
layer_height = 0.24
top_infill_extrusion_width = 0.45
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.28mm*]
inherits = *common*
layer_height = 0.28
first_layer_height = 0.36
top_infill_extrusion_width = 0.45
first_layer_extrusion_width = 0.75
bottom_solid_layers = 3
top_solid_layers = 4

[print:0.08mm SUPERDETAIL @Artillery]
inherits = *0.08mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.10mm HIGHDETAIL @Artillery]
inherits = *0.10mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.12mm DETAIL @Artillery]
inherits = *0.12mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.16mm OPTIMAL @Artillery]
inherits = *0.16mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.20mm SLOW @Artillery]
inherits = *0.20mm*
external_perimeter_speed = 15
fill_density = 20%
gap_fill_speed = 25
infill_speed = 50
perimeter_speed = 30
perimeters = 3
solid_infill_speed = 50
top_solid_infill_speed = 25
first_layer_speed = 15
travel_speed = 100
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.20mm NORMAL @Artillery]
inherits = *0.20mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.20mm SPEED @Artillery]
inherits = *0.20mm*
external_perimeter_speed = 35
fill_density = 15%
fill_pattern = grid
gap_fill_speed = 45
infill_speed = 150
infill_only_where_needed = 1
perimeter_speed = 60
perimeters = 2
solid_infill_speed = 150
top_solid_infill_speed = 50
travel_speed = 170
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.24mm DRAFT @Artillery]
inherits = *0.24mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.28mm SUPERDRAFT @Artillery]
inherits = *0.28mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:*common_x3_x4*]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = monotonic
bottom_solid_layers = 3
bottom_solid_min_thickness = 0
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 30
brim_separation = 0
brim_type = outer_only
brim_width = 0
compatible_printers =
compatible_printers_condition =
complete_objects = 0
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
external_perimeters_first = 0
extra_perimeters = 1
extra_perimeters_on_overhangs = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.45
fill_angle = 45
fill_pattern = alignedrectilinear
first_layer_acceleration_over_raft = 0
first_layer_height = 0.25
first_layer_speed = 30
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 20
gcode_comments = 0
gcode_label_objects = 0
gcode_resolution = 0.0125
gcode_substitutions =
infill_acceleration = 0
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
inherits =
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_height = 0.2
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 0
mmu_segmented_region_interlocking_depth = 0
mmu_segmented_region_max_width = 0
notes =
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
perimeter_acceleration = 1500
perimeter_speed = 120
seam_position = rear
skirts = 0
skirt_distance = 0
small_perimeter_speed = 25
solid_infill_extrusion_width = 0.45
support_material_extrusion_width = 0.35
top_infill_extrusion_width = 0.4
travel_acceleration = 3000
travel_speed = 250
external_perimeter_extrusion_width = 0.4

[print:*common_x3*]
inherits = *common_x3_x4*
compatible_printers_condition = printer_model=~/(X3).*/ and nozzle_diameter[0]==0.4
avoid_crossing_perimeters = 0
bridge_acceleration = 1000
default_acceleration = 3000
enable_dynamic_overhang_speeds = 1
external_perimeter_acceleration = 1500
external_perimeter_extrusion_width = 0.45
fill_density = 5%
first_layer_acceleration = 0
first_layer_extrusion_width = 0.42
infill_overlap = 25%
max_print_speed = 400
solid_infill_speed = 150
top_solid_infill_speed = 150

[print:X3 Default (0.20mm) @Artillery]
inherits = *common_x3*
first_layer_height = 0.2
perimeters = 2
seam_position = random
infill_anchor = 400%
small_perimeter_speed = 50%
external_perimeter_speed = 120
infill_speed = 150
support_material_speed = 200
bridge_speed = 70
gap_fill_speed = 120
overhang_speed_0 = 80%
overhang_speed_1 = 50
overhang_speed_2 = 30
overhang_speed_3 = 10
travel_speed = 350
first_layer_speed = 50
first_layer_acceleration = 1000
extrusion_width = 0.4
first_layer_extrusion_width = 0.5
perimeter_extrusion_width = 0.4
infill_overlap = 35%
resolution = 0.012
gcode_resolution = 0.012

[print:ArtillerySlicer X3 TPU @Artillery]
inherits = *common_x3*
external_perimeter_speed = 30
infill_speed = 30

[print:*common_x4*]
inherits = *common_x3_x4*
bridge_acceleration = 3000
external_perimeter_acceleration = 3000
first_layer_acceleration = 3000
first_layer_extrusion_width = 0.5
infill_overlap = 75%

[print:*common_x4_max*]
inherits = *common_x4*
default_acceleration = 3000
compatible_printers_condition = printer_model=~/(X4 Max).*/ and nozzle_diameter[0]==0.4

[print:*common_x4_plus*]
inherits = *common_x4*
default_acceleration = 5000
compatible_printers_condition = printer_model=~/(X4 Plus).*/ and nozzle_diameter[0]==0.4

[print:*common_x4_pro*]
inherits = *common_x4*
default_acceleration = 10000
compatible_printers_condition = printer_model=~/(X4 Pro).*/ and nozzle_diameter[0]==0.4

[print:*common_x4_ABS_PETG_PLA*]
external_perimeter_speed = 50%
max_print_speed = 300

[print:ArtillerySlicer X4 Max ABS @Artillery]
inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 0
infill_speed = 100
solid_infill_speed = 100
top_solid_infill_speed = 100

[print:ArtillerySlicer X4 Plus ABS @Artillery]
inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 0
infill_speed = 100
solid_infill_speed = 150
top_solid_infill_speed = 150

[print:ArtillerySlicer X4 Pro ABS @Artillery]
inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 0
infill_speed = 100
solid_infill_speed = 200
top_solid_infill_speed = 200

[print:ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery]
inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 0
infill_speed = 150
solid_infill_speed = 100
top_solid_infill_speed = 100

[print:ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery]
inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 0
infill_speed = 150
solid_infill_speed = 150
top_solid_infill_speed = 150

[print:ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery]
inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 0
infill_speed = 300
solid_infill_speed = 200
top_solid_infill_speed = 200

[print:ArtillerySlicer X4 Max PLA HS @Artillery]
inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 1
infill_speed = 150
solid_infill_speed = 100
top_solid_infill_speed = 100

[print:ArtillerySlicer X4 Plus PLA HS @Artillery]
inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 1
infill_speed = 150
solid_infill_speed = 150
top_solid_infill_speed = 150

[print:ArtillerySlicer X4 Pro PLA HS @Artillery]
inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 1
infill_speed = 300
solid_infill_speed = 200
top_solid_infill_speed = 200

[print:ArtillerySlicer X4 Max PLA Silk @Artillery]
inherits = *common_x4_max*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 0
infill_speed = 150
solid_infill_speed = 100
top_solid_infill_speed = 100

[print:ArtillerySlicer X4 Plus PLA Silk @Artillery]
inherits = *common_x4_plus*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 0
infill_speed = 150
solid_infill_speed = 150
top_solid_infill_speed = 150

[print:ArtillerySlicer X4 Pro PLA Silk @Artillery]
inherits = *common_x4_pro*; *common_x4_ABS_PETG_PLA*
avoid_crossing_perimeters = 0
infill_speed = 150
solid_infill_speed = 200
top_solid_infill_speed = 200

[print:*common_x4_TPU*]
avoid_crossing_perimeters = 0
enable_dynamic_overhang_speeds = 0
external_perimeter_speed = 30
fill_density = 15%
infill_speed = 30
max_print_speed = 60
solid_infill_speed = 30
top_solid_infill_speed = 30

[print:ArtillerySlicer X4 Max TPU @Artillery]
inherits = *common_x4_max*; *common_x4_TPU*

[print:ArtillerySlicer X4 Plus TPU @Artillery]
inherits = *common_x4_plus*; *common_x4_TPU*

[print:ArtillerySlicer X4 Pro TPU @Artillery]
inherits = *common_x4_pro*; *common_x4_TPU*

###############
## FILAMENTS ##
###############

# Common filament preset
[filament:*common*]
cooling = 1
compatible_printers = 
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 15
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Artillery.*/


# Common filament preset
[filament:*common_x3_x4*]
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
compatible_prints_condition =
cooling = 1
enable_dynamic_fan_speeds = 0
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 0.98
fan_always_on = 1
fan_below_layer_time = 60
filament_colour = #E2E2E2
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 0
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_minimal_purge_on_wipe_tower = 15
filament_multitool_ramming = 0
filament_multitool_ramming_flow = 10
filament_multitool_ramming_volume = 10
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length_toolchange = nil
filament_retract_lift = 0.1
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_restart_extra_toolchange = nil
filament_settings_id = ""
filament_soluble = 0
filament_spool_weight = 0
filament_toolchange_delay = 0
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Artillery
full_fan_speed_layer = 0
idle_temperature = nil
inherits =
max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 10
overhang_fan_speed_0 = 0
overhang_fan_speed_1 = 0
overhang_fan_speed_2 = 0
overhang_fan_speed_3 = 0
slowdown_below_layer_time = 5
start_filament_gcode = ; Filament gcode

[filament:*common_x3*]
inherits = *common_x3_x4*
disable_fan_first_layers = 2
filament_max_volumetric_speed = 0
filament_retract_before_travel = 1
filament_wipe = nil
compatible_printers_condition = printer_model=~/(X3).*/ and nozzle_diameter[0]==0.4

[filament:*common_x4*]
inherits = *common_x3_x4*
disable_fan_first_layers = 1
filament_retract_before_travel = 2
filament_retract_speed = 40
filament_wipe = 1
compatible_printers_condition = printer_model=~/(X4).*/ and nozzle_diameter[0]==0.4

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #428AF5
filament_cost = 20
filament_density = 1.24
filament_max_volumetric_speed = 15
filament_type = PLA
first_layer_bed_temperature = 65
first_layer_temperature = 210
full_fan_speed_layer = 3
max_fan_speed = 100
min_fan_speed = 100
temperature = 205

[filament:*PET*]
inherits = *common*
bed_temperature = 70
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #42E9F5
filament_cost = 30
filament_density = 1.27
filament_max_volumetric_speed = 8
filament_type = PETG
first_layer_bed_temperature = 70
first_layer_temperature = 235
max_fan_speed = 50
min_fan_speed = 20
temperature = 230

[filament:*ABS*]
inherits = *common*
bed_temperature = 90
bridge_fan_speed = 30
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #6603FC
filament_cost = 20
filament_density = 1.04
filament_max_volumetric_speed = 11
filament_type = ABS
first_layer_bed_temperature = 90
first_layer_temperature = 240
max_fan_speed = 0
min_fan_speed = 0
temperature = 240
top_fan_speed = 0

[filament:*TPU*]
inherits = *common*
bed_temperature = 55
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #CFFFFB
filament_cost = 30
filament_density = 1.2
filament_max_volumetric_speed = 11
filament_retract_before_travel = 4
filament_retract_length = 2.5
filament_retract_speed = 30
filament_type = TPU
first_layer_bed_temperature = 55
first_layer_temperature = 210
max_fan_speed = 70
min_fan_speed = 0

[filament:Generic PLA @Artillery]
inherits = *PLA*
filament_vendor = Generic

[filament:Generic PETG @Artillery]
inherits = *PET*
filament_vendor = Generic

[filament:Generic ABS @Artillery]
inherits = *ABS*
filament_vendor = Generic

[filament:Generic TPU @Artillery]
inherits = *TPU*
filament_vendor = Generic

[filament:Eolas Prints PLA @Artillery]
inherits = *PLA*
filament_vendor = Eolas Prints
filament_cost = 23.50
filament_density = 1.24
filament_spool_weight = 0
filament_colour = #4D9398
first_layer_bed_temperature = 65
first_layer_temperature = 208
temperature = 202

[filament:Eolas Prints PLA Matte @Artillery]
inherits = Eolas Prints PLA @Artillery
filament_cost = 25.50
filament_max_volumetric_speed = 14
temperature = 210

[filament:Eolas Prints INGEO 850 @Artillery]
inherits = Eolas Prints PLA @Artillery
filament_cost = 25.90
temperature = 210

[filament:Eolas Prints INGEO 870 @Artillery]
inherits = Eolas Prints PLA @Artillery
filament_cost = 25.90
temperature = 215
first_layer_bed_temperature = 68
first_layer_temperature = 220
bed_temperature = 65

[filament:Eolas Prints PETG @Artillery]
inherits = *PET*
filament_vendor = Eolas Prints
filament_cost = 29.90
filament_density = 1.27
filament_spool_weight = 0
filament_colour = #4D9398
temperature = 240
first_layer_bed_temperature = 85
first_layer_temperature = 235
bed_temperature = 90

[filament:Eolas Prints PETG - UV Resistant @Artillery]
inherits = Eolas Prints PETG @Artillery
filament_cost = 35.90
temperature = 242
first_layer_temperature = 237

[filament:Eolas Prints TPU 93A @Artillery]
inherits = *TPU*
filament_vendor = Eolas Prints
filament_cost = 34.99
filament_density = 1.21
filament_colour = #4D9398
filament_max_volumetric_speed = 1.2
temperature = 230
first_layer_bed_temperature = 30
bed_temperature = 30
filament_retract_length = 0
extrusion_multiplier = 1.16

[filament:Artillery ABS @X3]
inherits = *common_x3*
bed_temperature = 100
compatible_prints = X3 Default (0.20mm) @Artillery
filament_density = 1.04
filament_retract_length = 1
filament_retract_speed = 40
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 260
temperature = 250

[filament:Artillery PETG @X3]
inherits = *common_x3*
bed_temperature = 90
compatible_prints = X3 Default (0.20mm) @Artillery
filament_density = 1.26
filament_retract_length = 1.1
filament_retract_speed = 40
filament_type = PETG
first_layer_bed_temperature = 90
first_layer_temperature = 250
temperature = 245

[filament:Artillery PLA @X3]
inherits = *common_x3*
bed_temperature = 60
compatible_prints = X3 Default (0.20mm) @Artillery
filament_density = 1.24
filament_retract_length = 1
filament_retract_speed = 60
filament_type = PLA
first_layer_bed_temperature = 60
first_layer_temperature = 210
temperature = 210

[filament:Artillery PLA HS @X3]
inherits = *common_x3*
bed_temperature = 60
compatible_prints = X3 Default (0.20mm) @Artillery
filament_density = 1.2
filament_retract_length = 1.2
filament_retract_speed = 60
filament_type = PLA
first_layer_bed_temperature = 60
first_layer_temperature = 210
temperature = 210

[filament:Artillery PLA Silk @X3]
inherits = *common_x3*
bed_temperature = 70
compatible_prints = X3 Default (0.20mm) @Artillery
filament_density = 1.2
filament_retract_length = 1
filament_retract_speed = 40
filament_type = PLA
first_layer_bed_temperature = 70
first_layer_temperature = 210
temperature = 210

[filament:Artillery TPU @X3]
inherits = *common_x3*
bed_temperature = 70
compatible_prints = ArtillerySlicer X3 TPU @Artillery
filament_density = 1.21
filament_retract_length = 0.8
filament_retract_speed = 40
filament_type = TPU
first_layer_bed_temperature = 70
first_layer_temperature = 210
temperature = 210

[filament:Artillery ABS @X4]
inherits = *common_x4*
bed_temperature = 100
compatible_prints = ArtillerySlicer X4 Max ABS @Artillery; ArtillerySlicer X4 Plus ABS @Artillery; ArtillerySlicer X4 Pro ABS @Artillery
filament_density = 1.04
filament_max_volumetric_speed = 20
filament_retract_length = 1.3
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 260
temperature = 260

[filament:Artillery PETG @X4]
inherits = *common_x4*
bed_temperature = 90
compatible_prints = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery
filament_density = 1.26
filament_max_volumetric_speed = 20
filament_retract_length = 1.3
filament_type = PETG
first_layer_bed_temperature = 90
first_layer_temperature = 250
temperature = 250

[filament:Artillery PLA & PLA HS @X4]
inherits = *common_x4*
compatible_prints = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Max PLA HS @Artillery; ArtillerySlicer X4 Plus PLA HS @Artillery; ArtillerySlicer X4 Pro PLA HS @Artillery
bed_temperature = 60
filament_density = 1.2
filament_max_volumetric_speed = 20
filament_retract_length = 1.3
filament_type = PLA
first_layer_bed_temperature = 60
first_layer_temperature = 210
temperature = 210

[filament:Artillery PLA+ @X4]
inherits = *common_x4*
bed_temperature = 60
compatible_prints = ArtillerySlicer X4 Max PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Plus PETG & PLA & PLA+ @Artillery; ArtillerySlicer X4 Pro PETG & PLA & PLA+ @Artillery
filament_density = 1.25
filament_max_volumetric_speed = 20
filament_retract_length = 1.3
filament_type = PLA
first_layer_bed_temperature = 60
first_layer_temperature = 210
temperature = 210

[filament:Artillery PLA Silk @X4]
inherits = *common_x4*
bed_temperature = 60
compatible_prints = ArtillerySlicer X4 Max PLA Silk @Artillery; ArtillerySlicer X4 Plus PLA Silk @Artillery; ArtillerySlicer X4 Pro PLA Silk @Artillery
filament_density = 1.2
filament_max_volumetric_speed = 20
filament_retract_length = 1.2
filament_type = PLA
first_layer_bed_temperature = 70
first_layer_temperature = 215
temperature = 215

[filament:Artillery TPU @X4]
inherits = *common_x4*
bed_temperature = 70
compatible_prints = ArtillerySlicer X4 Max TPU @Artillery; ArtillerySlicer X4 Plus TPU @Artillery; ArtillerySlicer X4 Pro TPU @Artillery
filament_density = 1.21
filament_max_volumetric_speed = 4
filament_retract_length = 1.5
filament_type = TPU
first_layer_bed_temperature = 70
first_layer_temperature = 215
temperature = 215