# Print profiles for the Anycubic printers.

[vendor]
repo_id = non-prusa-sla
# Vendor name will be shown by the Config Wizard.
name = Anycubic SLA
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.0.0
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/AnycubicSLA/

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:PHOTON MONO]
name = Photon Mono
variants = default
technology = SLA
family = PHOTON MONO
default_materials = Generic Blue Resin @MONO 0.05

[printer_model:PHOTON MONO X]
name = Photon Mono X
variants = default
technology = SLA
family = PHOTON MONO
default_materials = Generic Blue Resin @MONO 0.05

[printer_model:PHOTON MONO X 6K]
name = Photon Mono X 6K
variants = default
technology = SLA
family = PHOTON MONO
default_materials = Anycubic Plant-based UV Resin Grey 23 @MONO 0.05

[printer_model:PHOTON MONO SE]
name = Photon Mono SE
variants = default
technology = SLA
family = PHOTON MONO
default_materials = Generic Blue Resin @MONO 0.05

## SLA printers

[sla_print:*common print ANYCUBIC SLA*]
compatible_printers_condition = printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/ 
layer_height = 0.05
pad_edge_radius = 0.5
pad_enable = 1
pad_max_merge_distance = 50
pad_wall_height = 0
pad_wall_thickness = 1
pad_wall_slope = 45
faded_layers = 8
slice_closing_radius = 0.005
support_base_diameter = 3
support_base_height = 1
support_critical_angle = 45
support_density_at_45 = 250
support_density_at_horizontal = 500
support_head_front_diameter = 0.4
support_head_penetration = 0.4
support_head_width = 3
support_max_bridge_length = 10
support_minimal_z = 0
support_object_elevation = 5
support_pillar_diameter = 1
support_pillar_connection_mode = zigzag
support_pillar_widening_factor = 0
supports_enable = 1
support_small_pillar_diameter_percent = 60%

[sla_print:0.05 Normal @ANYCUBIC ABSTRACT]
inherits = *common print ANYCUBIC SLA*
compatible_printers_condition = printer_notes=~/.*ABSTRACT_ONLY.*/
layer_height = 0.05

[sla_print:0.05 Normal @ANYCUBIC MONO]
inherits = 0.05 Normal @ANYCUBIC ABSTRACT
compatible_printers_condition = printer_notes=~/.*PHOTONMONO\n.*/
output_filename_format = [input_filename_base].pwmo

[sla_print:0.05 Normal @ANYCUBIC MONO X]
inherits = 0.05 Normal @ANYCUBIC ABSTRACT
compatible_printers_condition = printer_notes=~/.*PHOTONMONOX\n.*/
output_filename_format = [input_filename_base].pwmx

[sla_print:0.05 Normal @ANYCUBIC MONO X 6K]
inherits = 0.05 Normal @ANYCUBIC ABSTRACT
compatible_printers_condition = printer_notes=~/.*PHOTONMONOX6K\n.*/
output_filename_format = [input_filename_base].pwmx

[sla_print:0.05 Normal @ANYCUBIC MONO SE]
inherits = 0.05 Normal @ANYCUBIC ABSTRACT
compatible_printers_condition = printer_notes=~/.*PHOTONMONOSE\n.*/
output_filename_format = [input_filename_base].pwms


## SLA materials

#MONO series printer need a significantly reduced exposure time but are otherwise compatible
[sla_material:*common ANYCUBIC SLA*]
compatible_printers_condition = printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/ 
compatible_prints_condition = layer_height == 0.05
exposure_time = 7
initial_exposure_time = 40
initial_layer_height = 0.05
material_correction = 1,1,1
area_fill = 45
material_notes = #Distances are defined in mm, speeds are defined in mm/s.\n#Delay is defined in s.\nLIFT_DISTANCE=8.0\nLIFT_SPEED=2.5\nRETRACT_SPEED=3.0\nBOTTOM_LIFT_SPEED=2.0\nBOTTOM_LIFT_DISTANCE=9.0\nDELAY_BEFORE_EXPOSURE=0.5\nANTIALIASING=1

[sla_material:*common 0.05 ANYCUBIC SLA*]
inherits = *common ANYCUBIC SLA*

[sla_material:Generic Blue Resin @MONO 0.05]
inherits = *common 0.05 ANYCUBIC SLA*
exposure_time = 2.5
initial_exposure_time = 40
material_type = Tough
material_vendor = Generic
material_colour = #6080EC
compatible_printers_condition = printer_notes=~/.*MONO.*/ and printer_notes=~/.*VENDOR_ANYCUBIC.*/ and printer_notes=~/.*SLA.*/ 

[sla_material:Anycubic Plant-based UV Resin Grey 23 @MONO 0.05]
inherits = *common 0.05 ANYCUBIC SLA*
exposure_time = 2.3
initial_exposure_time = 23
material_type = Plant-Based
material_vendor = Anycubic
material_colour = #808080
compatible_printers_condition = printer_model=="PHOTON MONO X 6K"
material_notes = LIFT_SPEED=2

[sla_material:Anycubic Plant-based UV Resin Grey 28 @MONO 0.05]
inherits = *common 0.05 ANYCUBIC SLA*
exposure_time = 2
initial_exposure_time = 28
material_type = Plant-Based
material_vendor = Anycubic
material_colour = #808080
compatible_printers_condition = printer_model=="PHOTON MONO X"
material_notes = LIFT_SPEED=2

[sla_material:Anycubic Plant-based UV Resin Grey 30 @MONO 0.05]
inherits = *common 0.05 ANYCUBIC SLA*
exposure_time = 2
initial_exposure_time = 30
material_type = Plant-Based
material_vendor = Anycubic
material_colour = #808080
compatible_printers_condition = printer_model=="PHOTON MONO SE"
material_notes = LIFT_SPEED=2

## Printers

[printer:Anycubic Photon Mono]
printer_technology = SLA
printer_model = PHOTON MONO
printer_variant = default
default_sla_material_profile = Generic Blue Resin @MONO 0.05
default_sla_print_profile = 0.05 Normal @ANYCUBIC
thumbnails = 224x168
sla_archive_format = pwmo
bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56
display_orientation = landscape
display_mirror_x = 1
display_mirror_y = 0
display_pixels_x = 1620
display_pixels_y = 2560
display_width = 82.62
display_height = 130.56
max_print_height = 165
elefant_foot_compensation = 0.2
elefant_foot_min_width = 0.2
min_exposure_time = 0.8
max_exposure_time = 120
min_initial_exposure_time = 0.8
max_initial_exposure_time = 300
printer_correction = 1,1,1
gamma_correction = 1
; area_fill = 50
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONO\nPRINTER_TECHNOLOGY_SLA\n

[printer:Anycubic Photon Mono SE]
printer_technology = SLA
printer_model = PHOTON MONO SE
printer_variant = default
default_sla_material_profile = Generic Blue Resin @MONO 0.05
default_sla_print_profile = 0.05 Normal @ANYCUBIC
thumbnails = 224x168
sla_archive_format = pwms
bed_shape = 0x0,82.62x0,82.62x130.56,0x130.56
display_orientation = landscape
display_mirror_x = 1
display_mirror_y = 0
display_pixels_x = 1620
display_pixels_y = 2560
display_width = 82.62
display_height = 130.56
max_print_height = 160
elefant_foot_compensation = 0.2
elefant_foot_min_width = 0.2
min_exposure_time = 0.8
max_exposure_time = 120
min_initial_exposure_time = 0.8
max_initial_exposure_time = 300
printer_correction = 1,1,1
gamma_correction = 1
; area_fill = 45
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOSE\nPRINTER_TECHNOLOGY_SLA\n

[printer:Anycubic Photon Mono X]
printer_technology = SLA
printer_model = PHOTON MONO X
printer_variant = default
default_sla_material_profile = Generic Blue Resin @MONO 0.05
default_sla_print_profile = 0.05 Normal @ANYCUBIC
thumbnails = 224x168
sla_archive_format = pwmx
bed_shape = 1.48x1.02,193.48x1.02,193.48x121.02,1.48x121.02
display_height = 120
display_orientation = landscape
display_mirror_x = 1
display_mirror_y = 0
display_pixels_x = 3840
display_pixels_y = 2400
display_width = 192
max_print_height = 245
elefant_foot_compensation = 0.2
elefant_foot_min_width = 0.2
min_exposure_time = 1
max_exposure_time = 120
min_initial_exposure_time = 1
max_initial_exposure_time = 300
printer_correction = 1,1,1
gamma_correction = 1
; area_fill = 45
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX\nPRINTER_TECHNOLOGY_SLA\n

[printer:Anycubic Photon Mono X 6K]
printer_technology = SLA
printer_model = PHOTON MONO X 6K
printer_variant = default
default_sla_material_profile = Anycubic Plant-based UV Resin Grey @MONO 0.05
default_sla_print_profile = 0.05 Normal @ANYCUBIC
thumbnails = 224x168
sla_archive_format = pwmx
bed_shape = 1.48x1.02,198.48x1.02,198.48x123.02,1.48x123.02
display_height = 122
display_orientation = landscape
display_mirror_x = 1
display_mirror_y = 0
display_pixels_x = 5760
display_pixels_y = 3600
display_width = 197
max_print_height = 245
elefant_foot_compensation = 0.2
elefant_foot_min_width = 0.2
min_exposure_time = 1
max_exposure_time = 120
min_initial_exposure_time = 1
max_initial_exposure_time = 300
printer_correction = 1,1,1
gamma_correction = 1
; area_fill = 45
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.'\nPRINTER_VENDOR_ANYCUBIC\nPRINTER_MODEL_PHOTONMONOX6K\n