# Print profiles for the AnkerMake printers.

[vendor]
# Vendor name will be shown by the Config Wizard.
name = AnkerMake
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 1.1.3
# Where to get the updates from?
config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Anker/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

[printer_model:M5]
name = AnkerMake M5
variants = 0.4
technology = FFF
family = AnkerMake
bed_model = M5-bed.stl
bed_texture = M5-texture_v2.svg
thumbnail = M5_thumbnail_v2.png
default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER; 

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.
[printer_model:M5C]
name = AnkerMake M5C
variants = 0.4
technology = FFF
family = AnkerMake
bed_model = M5C-bed.stl
bed_texture = M5C-texture_v2.svg
thumbnail = M5C_thumbnail_v2.png
default_materials = Generic PLA+ @ANKER; Generic PLA @ANKER; Generic PET @ANKER; Generic ABS @ANKER; 

# All presets starting with asterisk, for example *common*, are intermediate and they will
# not make it into the user interface.

# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 2500
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 50
brim_separation = 0.1
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
complete_objects = 0
default_acceleration = 2500
dont_support_bridges = 1
elefant_foot_compensation = 0.2
ensure_vertical_shell_thickness = 1
external_perimeter_speed = 150
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 30
extruder_clearance_radius = 45
extrusion_width = 0.4
external_perimeter_extrusion_width = 0.44

fill_angle = 45
fill_density = 10%
fill_pattern = grid
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.4
first_layer_speed = 50%
first_layer_speed_over_raft = 30
gap_fill_enabled = 1
gap_fill_speed = 150
gcode_comments = 0
infill_acceleration = 2500
infill_anchor = 2.5
infill_anchor_max = 12
infill_every_layers = 1
infill_extruder = 1
infill_first = 0
infill_extrusion_width = 0.4
infill_only_where_needed = 0
infill_overlap = 10%
infill_speed = 250
interface_shells = 0
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
overhangs = 1
perimeter_acceleration = 2500
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_generator = classic
perimeter_speed = 250
perimeters = 3
post_process = 
print_settings_id = 
raft_layers = 0
resolution = 0.01
seam_position = aligned
single_extruder_multi_material_priming = 0
skirt_distance = 3
skirt_height = 1
skirts = 3
small_perimeter_speed = 150
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 250
spiral_vase = 0
standby_temperature_delta = -5
support_material_auto = 0
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 80%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 150
support_material_synchronize_layers = 0
support_material_threshold = 55
support_material_with_sheath = 0
support_material_xy_spacing = 50%
thick_bridges = 0
thin_walls = 0
top_solid_infill_speed = 150
top_infill_extrusion_width = 0.4
top_fill_pattern = rectilinear
bottom_fill_pattern = rectilinear
travel_speed = 250
travel_speed_z = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0

[print:*0.10mm*]
inherits = *common*
layer_height = 0.10
first_layer_height = 0.10
bottom_solid_layers = 7
top_solid_layers = 9
bridge_flow_ratio = 1

[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
first_layer_height = 0.14
bottom_solid_layers = 4
top_solid_layers = 5

[print:*0.30mm*]
inherits = *common*
layer_height = 0.30
first_layer_height = 0.21
bottom_solid_layers = 3
top_solid_layers = 4


[print:0.10 mm HIGHDETAIL (0.4 mm nozzle) @ANKER]
inherits = *0.10mm*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4

[print:0.20 mm NORMAL (0.4 mm nozzle) @ANKER]
inherits = *0.20mm*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4


[print:0.30 mm SUPERDRAFT (0.4 mm nozzle) @ANKER]
inherits = *0.30mm*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5_).*/ and nozzle_diameter[0]==0.4

[print:*common-M5C*]
avoid_crossing_curled_overhangs = 0
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bottom_fill_pattern = rectilinear
bottom_solid_min_thickness = 0.8
bridge_angle = 0
bridge_flow_ratio = 1
bridge_speed = 30
brim_separation = 0.1
brim_type = no_brim
brim_width = 8
complete_objects = 0
dont_support_bridges = 1
draft_shield = disabled
elefant_foot_compensation = 0
enable_dynamic_overhang_speeds = 1
external_perimeter_extrusion_width = 0.44
external_perimeter_speed = 75
external_perimeters_first = 1
extra_perimeters = 1
extra_perimeters_on_overhangs = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.4
fill_angle = 45
fill_density = 10%
fill_pattern = grid
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_extrusion_width = 0.5
first_layer_speed = 50
first_layer_speed_over_raft = 30
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 75
gcode_comments = 0
gcode_label_objects = 0
gcode_resolution = 0.0125
gcode_substitutions = "(G28 ;Home.*$)";"${1}\\nM4899 T3\\n";;";S-Curve"
infill_acceleration = 4000
infill_anchor = 30
infill_anchor_max = 60
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.4
infill_first = 0
infill_overlap = 25%
infill_speed = 250
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
max_print_speed = 500
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_feature_size = 25%
min_skirt_length = 0
mmu_segmented_region_max_width = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{initial_filament_type}_{printer_model}.gcode
overhang_speed_0 = 25
overhang_speed_1 = 55
overhang_speed_2 = 55
overhang_speed_3 = 100%
overhangs = 1
perimeter_extruder = 1
perimeter_extrusion_width = 0.4
perimeter_generator = classic
perimeter_speed = 200
post_process = 
print_settings_id = 
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 0
raft_layers = 0
resolution = 0
seam_position = aligned
single_extruder_multi_material_priming = 1
skirt_distance = 6
skirt_height = 1
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
small_perimeter_speed = 75
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.4
solid_infill_speed = 100
spiral_vase = 0
staggered_inner_seams = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 90
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.3
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 1.333
support_material_speed = 150
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 30
support_material_with_sheath = 0
support_material_xy_spacing = 0.8
support_tree_angle = 40
support_tree_angle_slow = 25
support_tree_branch_diameter = 2
support_tree_branch_diameter_angle = 5
support_tree_branch_distance = 1
support_tree_tip_diameter = 0.8
support_tree_top_rate = 15%
thick_bridges = 0
thin_walls = 1
threads = 10
top_fill_pattern = rectilinear
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 50
top_solid_min_thickness = 0.8
travel_speed = 500
travel_speed_z = 10
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_cone_angle = 0
wipe_tower_extra_spacing = 100%
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0

[print:Precision - M5C (0.4 mm nozzle) @ANKER]
inherits = *common-M5C*
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_PRECISION).*/ and nozzle_diameter[0]==0.4
first_layer_height = 0.14
layer_height = 0.16
top_solid_layers = 5
bottom_solid_layers = 3
perimeters = 2
bridge_acceleration = 500
default_acceleration = 4000
external_perimeter_acceleration = 3000
perimeter_acceleration = 3000
top_solid_infill_acceleration = 2500
travel_acceleration = 4000
solid_infill_acceleration = 2500

[print:Normal - M5C (0.4 mm nozzle) @ANKER]
inherits = *common-M5C*
notes = PRINT_COMPATIBLE\n P_NORMAL\n F_PLA__Basic\n
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_NORMAL).*/ and nozzle_diameter[0]==0.4
first_layer_height = 0.14
layer_height = 0.2
top_solid_layers = 4
bottom_solid_layers = 4
perimeters = 3
bridge_acceleration = 500
default_acceleration = 2500
external_perimeter_acceleration = 2500
external_perimeter_speed = 150
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
first_layer_speed = 50
gap_fill_speed = 75
infill_acceleration = 2500
infill_speed = 250
max_print_speed = 250
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 30
overhang_speed_3 = 30
perimeter_acceleration = 2500
perimeter_speed = 250
small_perimeter_speed = 75
solid_infill_acceleration = 2500
solid_infill_speed = 150
top_solid_infill_acceleration = 2500
top_solid_infill_speed = 150
travel_acceleration = 2500
travel_speed = 250
travel_speed_z = 10

[print:Fast - M5C (0.4 mm nozzle) @ANKER]
inherits = *common-M5C*
notes = PRINT_COMPATIBLE\n P_FAST\n F_PLA__Basic\n
compatible_printers_condition = printer_notes=~/.*(MACHINE_M5C_).*/ and printer_notes=~/.*(P_FAST).*/ and nozzle_diameter[0]==0.4
layer_height = 0.25
first_layer_height = 0.14
perimeters = 2
top_solid_layers = 4
bottom_solid_layers = 3
external_perimeter_acceleration = 3000
perimeter_acceleration = 5000
top_solid_infill_acceleration = 4000
solid_infill_acceleration = 4000
infill_acceleration = 5000
bridge_acceleration = 500
first_layer_acceleration = 2500
first_layer_acceleration_over_raft = 0
travel_acceleration = 5000
default_acceleration = 5000
# Speed
perimeter_speed = 250
small_perimeter_speed = 75
external_perimeter_speed = 150
infill_speed = 270
solid_infill_speed = 100
top_solid_infill_speed = 100
support_material_speed = 150
support_material_interface_speed = 100%
bridge_speed = 20
gap_fill_speed = 75
overhang_speed_0 = 15
overhang_speed_1 = 20
overhang_speed_2 = 30
overhang_speed_3 = 30
travel_speed = 500
travel_speed_z = 10
first_layer_speed = 50
first_layer_speed_over_raft = 30
max_print_speed = 500

# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
#   https://www.thingiverse.com/thing:2615842
# Pay particular attention to bridging, overhangs and retractions.
# Also print the following bed adhesion test at 0.1 layer height as well:
#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
# At least for PLA, please keep bed temp at 60, as many Creality printers do not have any ABL
# So having some leeway to get good bed adhesion is not a luxury for many users

[filament:*common*]
cooling = 1
compatible_printers = 
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 30
slowdown_below_layer_time = 8
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ANKERMAKE.*/

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 60
first_layer_temperature = 230
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 200

[filament:*PLA+*]
inherits = *common*
bed_temperature = 65
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_type = PLA+
filament_density = 1.24
filament_cost = 20
first_layer_bed_temperature = 65
first_layer_temperature = 230
fan_always_on = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 200

[filament:*PET*]
inherits = *common*
bed_temperature = 80
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = PETG
filament_density = 1.27
filament_cost = 30
first_layer_bed_temperature = 80
first_layer_temperature = 255
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 50
bridge_fan_speed = 100
temperature = 255

[filament:*ABS*]
inherits = *common*
bed_temperature = 90
disable_fan_first_layers = 2
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_type = ABS
filament_density = 1.04
filament_cost = 20
first_layer_bed_temperature = 90
first_layer_temperature = 255
fan_always_on = 0
max_fan_speed = 0
min_fan_speed = 0
bridge_fan_speed = 30
top_fan_speed = 0
temperature = 255

[filament:Generic PLA @ANKER]
inherits = *PLA*
filament_vendor = Generic

[filament:Generic PLA+ @ANKER]
inherits = *PLA+*
filament_vendor = Generic

[filament:Generic PETG @ANKER]
inherits = *PET*
filament_vendor = Generic

[filament:Generic ABS @ANKER]
inherits = *ABS*
first_layer_bed_temperature = 90
bed_temperature = 90
filament_vendor = Generic


# Common printer preset
[printer:*common*]
printer_vendor = AnkerMake
# General
## Size and coordinates
max_print_height = 250
z_offset = 0
## Capabilities
#extruders_count = 1
single_extruder_multi_material = 0
## Firmware
gcode_flavor = marlin2
thumbnails = 256x256
thumbnails_format = PNG
silent_mode = 0
remaining_times = 1
## Advanced
use_relative_e_distances = 1
use_firmware_retraction = 0
use_volumetric_e = 0
variable_layer_height = 1
# Custom G-code
start_gcode = M104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}\n
autoemit_temperature_commands = 1
end_gcode = M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;{layer_z}\n;LAYER:{layer_num+1}
layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0
toolchange_gcode = 
between_objects_gcode = 
color_change_gcode = M600
pause_print_gcode = M601
template_custom_gcode = 
# Machine limits
## General
### machine_limits_usage = emit_to_gcode  time_estimate_only  ignore
machine_limits_usage = time_estimate_only
## Maximum feedrates
machine_max_feedrate_e = 100
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 50
## Maximum accelerations
machine_max_acceleration_e = 10000
machine_max_acceleration_extruding = 10000
machine_max_acceleration_retracting = 10000
machine_max_acceleration_travel = 10000
machine_max_acceleration_x = 10000
machine_max_acceleration_y = 10000
machine_max_acceleration_z = 10000
## Jerk limits
machine_max_jerk_x = 15, 15
machine_max_jerk_y = 15, 15
machine_max_jerk_z = 0.3, 0.3
machine_max_jerk_e = 3, 3
machine_min_extruding_rate = 0, 0
machine_min_travel_rate = 0, 0
# Extruder 1 2 3 4 5 6
## Size
nozzle_diameter = 0.4
## Preview
extruder_colour = #9BE198
## Layer height limits
min_layer_height = 0.08
max_layer_height = 0.32
## Position (for multi-extruder printers)
extruder_offset = 0x0
## Retraction
retract_length = 3
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_speed = 60
deretract_speed = 0
retract_restart_extra = 0
retract_before_travel = 0.8
retract_layer_change = 1
wipe = 0
retract_before_wipe = 0%
## Retraction when tool is disabled (advanced settings for multi-extruder setups)
retract_length_toolchange = 4
retract_restart_extra_toolchange = 0
# Notes
printer_notes = Base printer notes is EMPTY!
default_print_profile = 
default_filament_profile = Generic PLA+ @ANKER
printer_technology = FFF
printer_settings_id = 
[printer:*M5*]
inherits = *common*
bed_shape = 0x0,235-0,235x235,0x235
max_print_height = 250
printer_model = M5
retract_length = 3
retract_speed = 60
deretract_speed = 60
retract_before_travel = 3
retract_before_wipe = 0%
printer_notes = MACHINE_M5_\n PRINTER_VENDOR_ANKERMAKE\n PRINTER_MODEL_M5\n
[printer:*M5C*]
inherits = *common*
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 250
printer_model = M5C
retract_length = 0.8
retract_speed = 60
deretract_speed = 60
retract_before_travel = 3
retract_before_wipe = 0%
wipe = 1
printer_notes = MACHINE_M5C_\n PRINTER_VENDOR_ANKERMAKE\n P_PRECISION P_NORMAL P_FAST\n
[printer:AnkerMake M5 (0.4 mm nozzle)]
inherits = *M5*
nozzle_diameter = 0.4
printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0
default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER
[printer:AnkerMake M5C (0.4 mm nozzle)]
inherits = *M5C*
nozzle_diameter = 0.4
printer_variant = 0.4
min_layer_height = 0.08
max_layer_height = 0.32
retract_lift_above = 0
default_print_profile = 0.2 mm OPTIMAL (0.4 mm nozzle) @ANKER