# Translation file for Chinese (S) # Copyright (C) 2021 # This file is distributed under the same license as Slic3r. # msgid "" msgstr "" "Project-Id-Version: Slic3r\n" "POT-Creation-Date: 2021-05-26 00:00+0200\n" "PO-Revision-Date: 2021-05-26 00:00+0200\n" "Last-Translator: Prusa\n" "Language-Team:\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Language: zh_CN\n" #: src/slic3r/GUI/AboutDialog.cpp:45 src/slic3r/GUI/AboutDialog.cpp:310 msgid "Portions copyright" msgstr "部分版权" #: src/slic3r/GUI/AboutDialog.cpp:139 src/slic3r/GUI/AboutDialog.cpp:267 msgid "Copyright" msgstr "版权" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:141 msgid "" "License agreements of all following programs (libraries) are part of " "application license agreement" msgstr "所有以下程序(库)的许可协议是应用程序许可协议的一部分" #: src/slic3r/GUI/AboutDialog.cpp:210 #, possible-c-format msgid "About %s" msgstr "关于 %s" #: src/slic3r/GUI/AboutDialog.cpp:242 src/slic3r/GUI/AboutDialog.cpp:372 #: src/slic3r/GUI/GUI_App.cpp:261 src/slic3r/GUI/MainFrame.cpp:151 msgid "Version" msgstr "版本" #. TRN "Slic3r _is licensed under the_ License" #: src/slic3r/GUI/AboutDialog.cpp:269 src/slic3r/GUI/GUI_App.cpp:265 msgid "is licensed under the" msgstr "根据" #: src/slic3r/GUI/AboutDialog.cpp:270 src/slic3r/GUI/GUI_App.cpp:265 msgid "GNU Affero General Public License, version 3" msgstr "GNU Affero 通用公共许可证，版本 3" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:78 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it." msgstr "" "%s 遇到错误。这可能是由于内存不足造成的。如果您确定您的系统上有足够的内存，这" "可能也是一个软件错误，欢迎你向我们提交问题报告。" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:188 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:552 msgid "Running post-processing scripts" msgstr "运行后处理脚本" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:190 #, possible-c-format msgid "G-code file exported to %1%" msgstr "G 代码文件导出到 %1%" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:195 #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:251 msgid "Slicing complete" msgstr "切片完成" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:246 #, possible-c-format msgid "Masked SLA file exported to %1%" msgstr "已将 贴面过 SLA 文件导出到 %1%" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:555 msgid "Copying of the temporary G-code to the output G-code failed" msgstr "将临时 G 代码复制到输出 G 代码失败" #: src/slic3r/GUI/BackgroundSlicingProcess.cpp:585 #, possible-c-format msgid "Scheduling upload to `%1%`. See Window -> Print Host Upload Queue" msgstr "计划上传到 `%1%`。请参阅窗口-> 打印主机上传队列" #: src/slic3r/GUI/BedShapeDialog.cpp:93 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:162 msgid "Size" msgstr "大小" #: src/slic3r/GUI/BedShapeDialog.cpp:94 msgid "Origin" msgstr "起源" #: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:1445 msgid "Diameter" msgstr "直径" #: src/slic3r/GUI/BedShapeDialog.cpp:110 msgid "Size in X and Y of the rectangular plate." msgstr "矩形框在X和Y方向的尺寸。" #: src/slic3r/GUI/BedShapeDialog.cpp:121 msgid "" "Distance of the 0,0 G-code coordinate from the front left corner of the " "rectangle." msgstr "G-code 0,0 坐标相对于矩形框左前角落的距离。" #: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:247 #: src/slic3r/GUI/ConfigWizard.cpp:1381 src/slic3r/GUI/ConfigWizard.cpp:1395 #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:88 #: src/slic3r/GUI/GCodeViewer.cpp:2428 src/slic3r/GUI/GCodeViewer.cpp:2434 #: src/slic3r/GUI/GCodeViewer.cpp:2442 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:179 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:145 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:488 #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 #: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:115 #: src/libslic3r/PrintConfig.cpp:124 src/libslic3r/PrintConfig.cpp:135 #: src/libslic3r/PrintConfig.cpp:297 src/libslic3r/PrintConfig.cpp:423 #: src/libslic3r/PrintConfig.cpp:432 src/libslic3r/PrintConfig.cpp:462 #: src/libslic3r/PrintConfig.cpp:485 src/libslic3r/PrintConfig.cpp:603 #: src/libslic3r/PrintConfig.cpp:612 src/libslic3r/PrintConfig.cpp:667 #: src/libslic3r/PrintConfig.cpp:1064 src/libslic3r/PrintConfig.cpp:1077 #: src/libslic3r/PrintConfig.cpp:1098 src/libslic3r/PrintConfig.cpp:1344 #: src/libslic3r/PrintConfig.cpp:1448 src/libslic3r/PrintConfig.cpp:1681 #: src/libslic3r/PrintConfig.cpp:2267 src/libslic3r/PrintConfig.cpp:2519 #: src/libslic3r/PrintConfig.cpp:2606 src/libslic3r/PrintConfig.cpp:2616 #: src/libslic3r/PrintConfig.cpp:2648 src/libslic3r/PrintConfig.cpp:2668 #: src/libslic3r/PrintConfig.cpp:2824 src/libslic3r/PrintConfig.cpp:2834 #: src/libslic3r/PrintConfig.cpp:2993 src/libslic3r/PrintConfig.cpp:3002 #: src/libslic3r/PrintConfig.cpp:3057 src/libslic3r/PrintConfig.cpp:3066 #: src/libslic3r/PrintConfig.cpp:3077 src/libslic3r/PrintConfig.cpp:3107 #: src/libslic3r/PrintConfig.cpp:3116 src/libslic3r/PrintConfig.cpp:3205 #: src/libslic3r/PrintConfig.cpp:3224 src/libslic3r/PrintConfig.cpp:3337 #: src/libslic3r/PrintConfig.cpp:3348 src/libslic3r/PrintConfig.cpp:3512 #: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3651 #: src/libslic3r/PrintConfig.cpp:3721 src/libslic3r/PrintConfig.cpp:3780 #: src/libslic3r/PrintConfig.cpp:3848 src/libslic3r/PrintConfig.cpp:4021 #: src/libslic3r/PrintConfig.cpp:4165 src/libslic3r/PrintConfig.cpp:4173 #: src/libslic3r/PrintConfig.cpp:4181 src/libslic3r/PrintConfig.cpp:4214 #: src/libslic3r/PrintConfig.cpp:4221 src/libslic3r/PrintConfig.cpp:4233 #: src/libslic3r/PrintConfig.cpp:4244 src/libslic3r/PrintConfig.cpp:4256 #: src/libslic3r/PrintConfig.cpp:4300 src/libslic3r/PrintConfig.cpp:4311 #: src/libslic3r/PrintConfig.cpp:4429 src/libslic3r/PrintConfig.cpp:4440 #: src/libslic3r/PrintConfig.cpp:4448 src/libslic3r/PrintConfig.cpp:4456 #: src/libslic3r/PrintConfig.cpp:4621 src/libslic3r/PrintConfig.cpp:4655 #: src/libslic3r/PrintConfig.cpp:4794 src/libslic3r/PrintConfig.cpp:4803 #: src/libslic3r/PrintConfig.cpp:4812 src/libslic3r/PrintConfig.cpp:4822 #: src/libslic3r/PrintConfig.cpp:4887 src/libslic3r/PrintConfig.cpp:4897 #: src/libslic3r/PrintConfig.cpp:4909 src/libslic3r/PrintConfig.cpp:4929 #: src/libslic3r/PrintConfig.cpp:4939 src/libslic3r/PrintConfig.cpp:4951 #: src/libslic3r/PrintConfig.cpp:4969 src/libslic3r/PrintConfig.cpp:4984 #: src/libslic3r/PrintConfig.cpp:4998 src/libslic3r/PrintConfig.cpp:5009 #: src/libslic3r/PrintConfig.cpp:5022 src/libslic3r/PrintConfig.cpp:5067 #: src/libslic3r/PrintConfig.cpp:5077 src/libslic3r/PrintConfig.cpp:5086 #: src/libslic3r/PrintConfig.cpp:5096 src/libslic3r/PrintConfig.cpp:5112 #: src/libslic3r/PrintConfig.cpp:5136 msgid "mm" msgstr "mm" #: src/slic3r/GUI/BedShapeDialog.cpp:131 msgid "" "Diameter of the print bed. It is assumed that origin (0,0) is located in the " "center." msgstr "构建板(打印床)的直径。假定原点 (0,0) 位于中心。" #: src/slic3r/GUI/BedShapeDialog.cpp:141 msgid "Rectangular" msgstr "矩形" #: src/slic3r/GUI/BedShapeDialog.cpp:142 msgid "Circular" msgstr "圆" #: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:282 #: src/slic3r/GUI/GUI_Preview.cpp:1143 src/libslic3r/ExtrusionEntity.cpp:287 #: src/libslic3r/ExtrusionEntity.cpp:330 msgid "Custom" msgstr "自定义" #: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222 #: src/slic3r/GUI/GUI_ObjectList.cpp:2317 msgid "Shape" msgstr "形状" #: src/slic3r/GUI/BedShapeDialog.cpp:243 msgid "Load shape from STL..." msgstr "从STL文件加载形状..." #: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:2131 msgid "Settings" msgstr "设置" #: src/slic3r/GUI/BedShapeDialog.cpp:315 msgid "Texture" msgstr "纹理" #: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405 msgid "Load..." msgstr "加载..." #: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413 #: src/slic3r/GUI/Tab.cpp:3655 msgid "Remove" msgstr "移除" #: src/slic3r/GUI/BedShapeDialog.cpp:395 msgid "Model" msgstr "模型" #: src/slic3r/GUI/BedShapeDialog.cpp:563 msgid "Choose an STL file to import bed shape from:" msgstr "选择 STL 文件以从以下对象导入床形:" #: src/slic3r/GUI/BedShapeDialog.cpp:570 src/slic3r/GUI/BedShapeDialog.cpp:619 #: src/slic3r/GUI/BedShapeDialog.cpp:642 msgid "Invalid file format." msgstr "无效的文件格式。" #: src/slic3r/GUI/BedShapeDialog.cpp:581 msgid "Error! Invalid model" msgstr "错误！无效模型" #: src/slic3r/GUI/BedShapeDialog.cpp:589 msgid "The selected file contains no geometry." msgstr "所选文件不包含任何几何图形。" #: src/slic3r/GUI/BedShapeDialog.cpp:593 msgid "" "The selected file contains several disjoint areas. This is not supported." msgstr "所选文件包含多个不重合的区域。暂不支持这种类型。" #: src/slic3r/GUI/BedShapeDialog.cpp:608 msgid "Choose a file to import bed texture from (PNG/SVG):" msgstr "选择要从 (PNG/SVG) 文件来导入床纹理:" #: src/slic3r/GUI/BedShapeDialog.cpp:631 msgid "Choose an STL file to import bed model from:" msgstr "选择 STL 文件来导入床模型:" #: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1340 msgid "Bed Shape" msgstr "热床形状" #: src/slic3r/GUI/BonjourDialog.cpp:55 msgid "Network lookup" msgstr "从网络查找" #: src/slic3r/GUI/BonjourDialog.cpp:72 msgid "Address" msgstr "地址" #: src/slic3r/GUI/BonjourDialog.cpp:73 msgid "Hostname" msgstr "主机名" #: src/slic3r/GUI/BonjourDialog.cpp:74 msgid "Service name" msgstr "服务名称" #: src/slic3r/GUI/BonjourDialog.cpp:76 msgid "OctoPrint version" msgstr "OctoPrint 版本" #: src/slic3r/GUI/BonjourDialog.cpp:218 msgid "Searching for devices" msgstr "正在查找设备" #: src/slic3r/GUI/BonjourDialog.cpp:225 msgid "Finished" msgstr "已完成" #: src/slic3r/GUI/ButtonsDescription.cpp:16 msgid "Buttons And Text Colors Description" msgstr "按钮和文本颜色描述" #: src/slic3r/GUI/ButtonsDescription.cpp:36 msgid "Value is the same as the system value" msgstr "值与系统值相同" #: src/slic3r/GUI/ButtonsDescription.cpp:65 msgid "" "Value was changed and is not equal to the system value or the last saved " "preset" msgstr "值已更改, 不等于系统值或上次保存的预设值" #: src/slic3r/GUI/CalibrationAbstractDialog.cpp:61 #: src/slic3r/GUI/FirmwareDialog.cpp:852 src/slic3r/GUI/FreeCADDialog.cpp:302 #: src/slic3r/GUI/Mouse3DController.cpp:551 #: src/slic3r/GUI/PrintHostDialogs.cpp:202 msgid "Close" msgstr "关闭" #: src/slic3r/GUI/CalibrationAbstractDialog.cpp:85 #: src/slic3r/GUI/GUI_ObjectList.cpp:2170 msgid "Error!" msgstr "错误！" #: src/slic3r/GUI/CalibrationAbstractDialog.cpp:150 #: src/slic3r/GUI/KBShortcutsDialog.cpp:276 msgid "Keyboard shortcuts" msgstr "键盘快捷键" #: src/slic3r/GUI/ConfigManipulation.cpp:49 #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Layer height" msgstr "层高度" #: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:1767 msgid "First layer height" msgstr "第一层高度" #: src/slic3r/GUI/ConfigManipulation.cpp:97 msgid "Spiral Vase" msgstr "螺旋花瓶" #: src/slic3r/GUI/ConfigManipulation.cpp:160 #: src/slic3r/GUI/ConfigManipulation.cpp:191 #: src/slic3r/GUI/ConfigManipulation.cpp:236 msgid "Wipe Tower" msgstr "擦料塔" #: src/slic3r/GUI/ConfigManipulation.cpp:233 msgid " mm." msgstr " mm." #: src/slic3r/GUI/ConfigManipulation.cpp:334 src/slic3r/GUI/Plater.cpp:389 #: src/libslic3r/PrintConfig.cpp:1795 src/libslic3r/PrintConfig.cpp:1952 #: src/libslic3r/PrintConfig.cpp:2132 src/libslic3r/PrintConfig.cpp:2148 msgid "Infill" msgstr "填充" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19 msgid "Upgrade" msgstr "升级" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21 msgid "Downgrade" msgstr "降级" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23 msgid "Before roll back" msgstr "回滚前" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25 #: src/libslic3r/PrintConfig.cpp:177 msgid "User" msgstr "用户" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28 #: src/slic3r/GUI/GUI_Preview.cpp:266 src/libslic3r/ExtrusionEntity.cpp:270 msgid "Unknown" msgstr "未知" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44 msgid "Active" msgstr "激活" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67 #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69 msgid " version" msgstr " 版本" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 src/libslic3r/Preset.cpp:1548 msgid "print" msgstr "打印" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56 msgid "filaments" msgstr "耗材" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/libslic3r/Preset.cpp:1550 msgid "SLA print" msgstr "SLA 打印" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 src/slic3r/GUI/Plater.cpp:697 #: src/libslic3r/Preset.cpp:1551 msgid "SLA material" msgstr "SLA 材料" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:62 src/libslic3r/Preset.cpp:1552 msgid "printer" msgstr "打印机" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 src/slic3r/GUI/Tab.cpp:1373 msgid "vendor" msgstr "供应商" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 msgid "version" msgstr "版本" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72 msgid "model" msgstr "模型" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72 msgid "variants" msgstr "变种" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:84 #, possible-c-format msgid "Incompatible with this %s" msgstr "与此 %s 不兼容" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:87 msgid "Activate" msgstr "激活" #: src/slic3r/GUI/ConfigSnapshotDialog.cpp:113 msgid "Configuration Snapshots" msgstr "配置快照" #: src/slic3r/GUI/ConfigWizard.cpp:247 msgid "nozzle" msgstr "喷嘴" #: src/slic3r/GUI/ConfigWizard.cpp:251 msgid "Alternate nozzles:" msgstr "备用喷嘴：" #: src/slic3r/GUI/ConfigWizard.cpp:315 msgid "All standard" msgstr "所有标准" #: src/slic3r/GUI/ConfigWizard.cpp:316 src/slic3r/GUI/ConfigWizard.cpp:616 #: src/slic3r/GUI/Tab.cpp:3736 src/slic3r/GUI/UnsavedChangesDialog.cpp:933 msgid "All" msgstr "所有" #: src/slic3r/GUI/ConfigWizard.cpp:317 src/slic3r/GUI/ConfigWizard.cpp:617 #: src/slic3r/GUI/DoubleSlider.cpp:1872 src/slic3r/GUI/Plater.cpp:361 #: src/slic3r/GUI/Plater.cpp:504 msgid "None" msgstr "无" #: src/slic3r/GUI/ConfigWizard.cpp:457 #, possible-c-format msgid "Welcome to the %s Configuration Assistant" msgstr "欢迎访问 %s 配置助手" #: src/slic3r/GUI/ConfigWizard.cpp:459 #, possible-c-format msgid "Welcome to the %s Configuration Wizard" msgstr "欢迎访问 %s 配置向导" #: src/slic3r/GUI/ConfigWizard.cpp:461 msgid "Welcome" msgstr "欢迎" #: src/slic3r/GUI/ConfigWizard.cpp:463 #, possible-c-format msgid "" "Hello, welcome to %s! This %s helps you with the initial configuration; just " "a few settings and you will be ready to print." msgstr "" "您好，欢迎来到 %s！此 %s 可帮助您进行初始配置;只需几个设置，您就可以打印。" #: src/slic3r/GUI/ConfigWizard.cpp:510 #, possible-c-format msgid "%s Family" msgstr "%s 系列" #: src/slic3r/GUI/ConfigWizard.cpp:605 msgid "Printer:" msgstr "打印机:" #: src/slic3r/GUI/ConfigWizard.cpp:607 msgid "Vendor:" msgstr "供应商:" #: src/slic3r/GUI/ConfigWizard.cpp:1118 msgid "Custom Printer Setup" msgstr "自定义打印机设置" #: src/slic3r/GUI/ConfigWizard.cpp:1118 msgid "Custom Printer" msgstr "自定义打印机" #: src/slic3r/GUI/ConfigWizard.cpp:1120 msgid "Define a custom printer profile" msgstr "定义自定义打印机配置文件" #: src/slic3r/GUI/ConfigWizard.cpp:1122 msgid "Custom profile name:" msgstr "自定义配置文件名称：" #: src/slic3r/GUI/ConfigWizard.cpp:1147 msgid "Automatic updates" msgstr "自动更新" #: src/slic3r/GUI/ConfigWizard.cpp:1147 msgid "Updates" msgstr "更新" #: src/slic3r/GUI/ConfigWizard.cpp:1155 src/slic3r/GUI/Preferences.cpp:97 msgid "Check for application updates" msgstr "检查应用程序更新" #: src/slic3r/GUI/ConfigWizard.cpp:1159 #, possible-c-format msgid "" "If enabled, %s checks for new application versions online. When a new " "version becomes available, a notification is displayed at the next " "application startup (never during program usage). This is only a " "notification mechanisms, no automatic installation is done." msgstr "" "如果启用，%s 将联机检查新的应用程序版本。当新版本可用时，在下次应用程序启动时" "将会显示通知（在程序使用期间从不显示通知）。这只是一个通知机制，不会自动安" "装。" #: src/slic3r/GUI/ConfigWizard.cpp:1165 src/slic3r/GUI/Preferences.cpp:132 msgid "Update built-in Presets automatically" msgstr "自动更新内置预设" #: src/slic3r/GUI/ConfigWizard.cpp:1169 #, possible-c-format msgid "" "If enabled, %s downloads updates of built-in system presets in the " "background.These updates are downloaded into a separate temporary location." "When a new preset version becomes available it is offered at application " "startup." msgstr "" "如果启用，%s 会在后台下载内置系统预设的更新。这些更新将下载到单独的临时位置。" "当新的预设版本可用时，它会在应用程序启动时提示。" #: src/slic3r/GUI/ConfigWizard.cpp:1172 msgid "" "Updates are never applied without user's consent and never overwrite user's " "customized settings." msgstr "未经用户同意，绝不会应用更新，也绝不会覆盖用户的自定义设置。" #: src/slic3r/GUI/ConfigWizard.cpp:1177 msgid "" "Additionally a backup snapshot of the whole configuration is created before " "an update is applied." msgstr "此外，在应用更新之前，将创建整个配置的备份快照。" #: src/slic3r/GUI/ConfigWizard.cpp:1184 src/slic3r/GUI/GUI_ObjectList.cpp:1844 #: src/slic3r/GUI/GUI_ObjectList.cpp:4598 src/slic3r/GUI/Plater.cpp:3230 #: src/slic3r/GUI/Plater.cpp:4124 src/slic3r/GUI/Plater.cpp:4155 msgid "Reload from disk" msgstr "从磁盘重新加载" #: src/slic3r/GUI/ConfigWizard.cpp:1266 msgid "Other Vendors" msgstr "其他供应商" #: src/slic3r/GUI/ConfigWizard.cpp:1270 #, possible-c-format msgid "Pick another vendor supported by %s" msgstr "选择由 %s 支持的其他供应商：" #: src/slic3r/GUI/ConfigWizard.cpp:1302 msgid "Firmware Type" msgstr "固件类型" #: src/slic3r/GUI/ConfigWizard.cpp:1302 msgid "Firmware" msgstr "固件" #: src/slic3r/GUI/ConfigWizard.cpp:1306 msgid "Choose the type of firmware used by your printer." msgstr "选择打印机使用的固件类型。" #: src/slic3r/GUI/ConfigWizard.cpp:1340 msgid "Bed Shape and Size" msgstr "热床形状和大小" #: src/slic3r/GUI/ConfigWizard.cpp:1343 msgid "Set the shape of your printer's bed." msgstr "设置打印机热床的形状。" #: src/slic3r/GUI/ConfigWizard.cpp:1363 msgid "Filament and Nozzle Diameters" msgstr "耗材丝和喷嘴直径" #: src/slic3r/GUI/ConfigWizard.cpp:1363 msgid "Print Diameters" msgstr "打印直径" #: src/slic3r/GUI/ConfigWizard.cpp:1377 msgid "Enter the diameter of your printer's hot end nozzle." msgstr "输入打印机热端喷嘴的直径。" #: src/slic3r/GUI/ConfigWizard.cpp:1380 msgid "Nozzle Diameter:" msgstr "喷嘴直径：" #: src/slic3r/GUI/ConfigWizard.cpp:1390 msgid "Enter the diameter of your filament." msgstr "输入耗材丝的直径。" #: src/slic3r/GUI/ConfigWizard.cpp:1391 msgid "" "Good precision is required, so use a caliper and do multiple measurements " "along the filament, then compute the average." msgstr "" "需要良好的精度, 因此请使用游标卡尺, 沿耗材丝进行多次测量, 然后计算平均值。" #: src/slic3r/GUI/ConfigWizard.cpp:1394 msgid "Filament Diameter:" msgstr "耗材丝直径:" #: src/slic3r/GUI/ConfigWizard.cpp:1423 msgid "Temperatures" msgstr "温度" #: src/slic3r/GUI/ConfigWizard.cpp:1439 msgid "Enter the temperature needed for extruding your filament." msgstr "输入挤出耗材丝所需的温度。" #: src/slic3r/GUI/ConfigWizard.cpp:1440 msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS." msgstr "根据经验, PLA 为160至 230°C, ABS 为215至250°C。" #: src/slic3r/GUI/ConfigWizard.cpp:1443 msgid "Extrusion Temperature:" msgstr "挤出温度：" #: src/slic3r/GUI/ConfigWizard.cpp:1444 src/slic3r/GUI/ConfigWizard.cpp:1458 #: src/libslic3r/PrintConfig.cpp:253 src/libslic3r/PrintConfig.cpp:255 #: src/libslic3r/PrintConfig.cpp:495 src/libslic3r/PrintConfig.cpp:1108 #: src/libslic3r/PrintConfig.cpp:1336 src/libslic3r/PrintConfig.cpp:1730 #: src/libslic3r/PrintConfig.cpp:1814 src/libslic3r/PrintConfig.cpp:3831 msgid "°C" msgstr "°C" #: src/slic3r/GUI/ConfigWizard.cpp:1453 msgid "" "Enter the bed temperature needed for getting your filament to stick to your " "heated bed." msgstr "输入让你的耗材粘在热床上所需的床温。" #: src/slic3r/GUI/ConfigWizard.cpp:1454 msgid "" "A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have " "no heated bed." msgstr "根据经验, PLA 为 60°C, ABS 为 110°C. 如果没有加热床, 请保留零。" #: src/slic3r/GUI/ConfigWizard.cpp:1457 msgid "Bed Temperature:" msgstr "热床温度:" #: src/slic3r/GUI/ConfigWizard.cpp:1897 src/slic3r/GUI/ConfigWizard.cpp:2639 msgid "Filaments" msgstr "耗材" #: src/slic3r/GUI/ConfigWizard.cpp:2289 src/slic3r/GUI/DoubleSlider.cpp:2258 #: src/slic3r/GUI/DoubleSlider.cpp:2278 src/slic3r/GUI/GUI.cpp:260 msgid "Notice" msgstr "通知" #: src/slic3r/GUI/ConfigWizard.cpp:2584 msgid "< &Back" msgstr "< &返回" #: src/slic3r/GUI/ConfigWizard.cpp:2585 msgid "&Next >" msgstr "&继续 >" #: src/slic3r/GUI/ConfigWizard.cpp:2586 msgid "&Finish" msgstr "&结束" #: src/slic3r/GUI/ConfigWizard.cpp:2587 src/slic3r/GUI/FirmwareDialog.cpp:151 #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:248 #: src/slic3r/GUI/ProgressStatusBar.cpp:26 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:656 msgid "Cancel" msgstr "取消" #: src/slic3r/GUI/ConfigWizard.cpp:2602 msgid "Prusa FFF Technology Printers" msgstr "Prusa FFF 技术打印机" #: src/slic3r/GUI/ConfigWizard.cpp:2605 msgid "Prusa MSLA Technology Printers" msgstr "Prusa MSLA 技术打印机" #: src/slic3r/GUI/ConfigWizard.cpp:2639 src/slic3r/GUI/ConfigWizard.cpp:2641 #: src/slic3r/GUI/GUI_ObjectList.cpp:4175 msgid "Type:" msgstr "类型：" #: src/slic3r/GUI/ConfigWizard.cpp:2767 msgid "Configuration Assistant" msgstr "配置助手" #: src/slic3r/GUI/ConfigWizard.cpp:2768 msgid "Configuration &Assistant" msgstr "配置 &助手" #: src/slic3r/GUI/ConfigWizard.cpp:2770 msgid "Configuration Wizard" msgstr "配置向导" #: src/slic3r/GUI/ConfigWizard.cpp:2771 msgid "Configuration &Wizard" msgstr "配置 &向导" #: src/slic3r/GUI/DoubleSlider.cpp:1237 msgid "One layer mode" msgstr "一层模式" #: src/slic3r/GUI/DoubleSlider.cpp:1430 src/slic3r/GUI/DoubleSlider.cpp:1464 #: src/slic3r/GUI/GUI_ObjectList.cpp:1883 #, possible-c-format msgid "Extruder %d" msgstr "挤出机 %d" #: src/slic3r/GUI/DoubleSlider.cpp:1431 src/slic3r/GUI/GUI_ObjectList.cpp:1884 msgid "active" msgstr "激活" #: src/slic3r/GUI/DoubleSlider.cpp:1440 src/slic3r/GUI/GUI_ObjectList.cpp:1851 msgid "Change extruder" msgstr "更换挤出机" #: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:522 #: src/slic3r/GUI/GUI_ObjectList.cpp:534 #: src/slic3r/GUI/GUI_ObjectList.cpp:1030 #: src/slic3r/GUI/GUI_ObjectList.cpp:4613 #: src/slic3r/GUI/GUI_ObjectList.cpp:4623 #: src/slic3r/GUI/GUI_ObjectList.cpp:4658 #: src/slic3r/GUI/ObjectDataViewModel.cpp:209 #: src/slic3r/GUI/ObjectDataViewModel.cpp:266 #: src/slic3r/GUI/ObjectDataViewModel.cpp:291 #: src/slic3r/GUI/ObjectDataViewModel.cpp:499 #: src/libslic3r/PrintConfig.cpp:1045 msgid "default" msgstr "默认" #: src/slic3r/GUI/ExtruderSequenceDialog.cpp:53 #: src/libslic3r/PrintConfig.cpp:649 src/libslic3r/PrintConfig.cpp:1968 #: src/libslic3r/PrintConfig.cpp:2979 src/libslic3r/PrintConfig.cpp:3215 #: src/libslic3r/PrintConfig.cpp:3378 src/libslic3r/PrintConfig.cpp:3663 #: src/libslic3r/PrintConfig.cpp:3712 msgid "layers" msgstr "层" #: src/slic3r/GUI/Field.cpp:204 msgid "default value" msgstr "默认值" #: src/slic3r/GUI/Field.cpp:207 msgid "parameter name" msgstr "参数名称" #: src/slic3r/GUI/Field.cpp:218 src/slic3r/GUI/OptionsGroup.cpp:855 #: src/slic3r/GUI/UnsavedChangesDialog.cpp:886 msgid "N/A" msgstr "N/A" #: src/slic3r/GUI/Field.cpp:240 #, possible-c-format msgid "%s doesn't support percentage" msgstr "%s 不支持百分比" #: src/slic3r/GUI/Field.cpp:260 src/slic3r/GUI/Field.cpp:314 #: src/slic3r/GUI/Field.cpp:1617 src/slic3r/GUI/GUI_ObjectLayers.cpp:413 msgid "Invalid numeric input." msgstr "无效的数字输入。" #: src/slic3r/GUI/Field.cpp:273 src/slic3r/GUI/Field.cpp:344 msgid "Parameter validation" msgstr "参数验证" #: src/slic3r/GUI/Field.cpp:286 src/slic3r/GUI/Field.cpp:325 #: src/slic3r/GUI/Field.cpp:392 src/slic3r/GUI/Field.cpp:1629 msgid "Input value is out of range" msgstr "输入值超出范围外" #: src/slic3r/GUI/Field.cpp:341 #, possible-c-format msgid "" "Do you mean %s%% instead of %s %s?\n" "Select YES if you want to change this value to %s%%, \n" "or NO if you are sure that %s %s is a correct value." msgstr "" "您指的是 %s%% 而不是 %s %s？\n" "如果要将此值更改为 %s%%,请选择\"是\",\n" "或 否,如果您确定 %s %s 是一个正确的值。" #: src/slic3r/GUI/FirmwareDialog.cpp:150 msgid "Flash!" msgstr "写入！" #: src/slic3r/GUI/FirmwareDialog.cpp:152 msgid "Flashing in progress. Please do not disconnect the printer!" msgstr "烧录正在进行中。请不要断开打印机的连接!" #: src/slic3r/GUI/FirmwareDialog.cpp:199 msgid "Flashing failed" msgstr "烧录失败" #: src/slic3r/GUI/FirmwareDialog.cpp:282 msgid "Flashing succeeded!" msgstr "烧录成功!" #: src/slic3r/GUI/FirmwareDialog.cpp:283 msgid "Flashing failed. Please see the avrdude log below." msgstr "烧录失败。请参见下面的日志。" #: src/slic3r/GUI/FirmwareDialog.cpp:284 msgid "Flashing cancelled." msgstr "烧录取消。" #: src/slic3r/GUI/FirmwareDialog.cpp:332 #, possible-c-format msgid "" "This firmware hex file does not match the printer model.\n" "The hex file is intended for: %s\n" "Printer reported: %s\n" "\n" "Do you want to continue and flash this hex file anyway?\n" "Please only continue if you are sure this is the right thing to do." msgstr "" "此固件十六进制文件与打印机型号不匹配。\n" "十六进制文件用于: %s \n" "打印机报告: %s \n" " \n" "是否仍要继续并烧录此十六进制文件？\n" "只有在你确定这是正确的做法的情况下才能继续。" #: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454 #, possible-c-format msgid "" "Multiple %s devices found. Please only connect one at a time for flashing." msgstr "找到多个 %s 设备。请一次只连接一个设备来烧录。" #: src/slic3r/GUI/FirmwareDialog.cpp:436 #, possible-c-format msgid "" "The %s device was not found.\n" "If the device is connected, please press the Reset button next to the USB " "connector ..." msgstr "" "找不到 %s 设备。\n" "如果设备已连接，请按 USB 接口旁边的\"重置\"按钮..." #: src/slic3r/GUI/FirmwareDialog.cpp:548 #, possible-c-format msgid "The %s device could not have been found" msgstr "找不到 %s 设备" #: src/slic3r/GUI/FirmwareDialog.cpp:645 #, possible-c-format msgid "Error accessing port at %s: %s" msgstr "在访问 %s: %s 端口时出错" #: src/slic3r/GUI/FirmwareDialog.cpp:647 #, possible-c-format msgid "Error: %s" msgstr "错误: %s" #: src/slic3r/GUI/FirmwareDialog.cpp:777 msgid "Firmware flasher" msgstr "固件烧录器" #: src/slic3r/GUI/FirmwareDialog.cpp:802 msgid "Firmware image:" msgstr "固件镜像:" #: src/slic3r/GUI/FirmwareDialog.cpp:805 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:324 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:399 msgid "Browse" msgstr "浏览" #: src/slic3r/GUI/FirmwareDialog.cpp:807 msgid "Serial port:" msgstr "串行端口：" #: src/slic3r/GUI/FirmwareDialog.cpp:809 msgid "Autodetected" msgstr "自动检测" #: src/slic3r/GUI/FirmwareDialog.cpp:810 msgid "Rescan" msgstr "重新扫描" #: src/slic3r/GUI/FirmwareDialog.cpp:817 msgid "Progress:" msgstr "进度:" #: src/slic3r/GUI/FirmwareDialog.cpp:820 msgid "Status:" msgstr "状态：" #: src/slic3r/GUI/FirmwareDialog.cpp:821 msgid "Ready" msgstr "准备好了" #: src/slic3r/GUI/FirmwareDialog.cpp:841 msgid "Advanced: Output log" msgstr "高级：输出日志" #: src/slic3r/GUI/FirmwareDialog.cpp:902 msgid "" "Are you sure you want to cancel firmware flashing?\n" "This could leave your printer in an unusable state!" msgstr "" "确实要取消固件烧录吗？\n" "这可能会使您的打印机处于无法使用的状态!" #: src/slic3r/GUI/FirmwareDialog.cpp:903 msgid "Confirmation" msgstr "确认" #: src/slic3r/GUI/FirmwareDialog.cpp:906 msgid "Cancelling..." msgstr "正在取消...." #: src/slic3r/GUI/FreeCADDialog.cpp:276 src/slic3r/GUI/GUI_ObjectList.cpp:1596 msgid "Load" msgstr "加载" #: src/slic3r/GUI/GCodeViewer.cpp:2442 msgid "from" msgstr "从" #: src/slic3r/GUI/GCodeViewer.cpp:2470 src/slic3r/GUI/GCodeViewer.cpp:2478 #: src/slic3r/GUI/GUI_Preview.cpp:244 msgid "Feature type" msgstr "功能类型" #: src/slic3r/GUI/GCodeViewer.cpp:2470 src/slic3r/GUI/GCodeViewer.cpp:2478 #: src/slic3r/GUI/RammingChart.cpp:76 msgid "Time" msgstr "时间" #: src/slic3r/GUI/GCodeViewer.cpp:2481 msgid "Height (mm)" msgstr "高度（mm）" #: src/slic3r/GUI/GCodeViewer.cpp:2482 msgid "Width (mm)" msgstr "宽度 (mm)" #: src/slic3r/GUI/GCodeViewer.cpp:2483 msgid "Speed (mm/s)" msgstr "回退速度(mm/s)" #: src/slic3r/GUI/GCodeViewer.cpp:2489 src/slic3r/GUI/GUI_Preview.cpp:253 #: src/slic3r/GUI/GUI_Preview.cpp:955 msgid "Tool" msgstr "工具" #: src/slic3r/GUI/GCodeViewer.cpp:2490 src/slic3r/GUI/GCodeViewer.cpp:2539 #: src/slic3r/GUI/GCodeViewer.cpp:2837 src/slic3r/GUI/GCodeViewer.cpp:2867 #: src/slic3r/GUI/GUI_Preview.cpp:254 src/slic3r/GUI/Plater.cpp:695 msgid "Filament" msgstr "打印丝" #: src/slic3r/GUI/GCodeViewer.cpp:2491 src/slic3r/GUI/GUI_Preview.cpp:255 msgid "Color Print" msgstr "彩色打印" #: src/slic3r/GUI/GCodeViewer.cpp:2492 src/libslic3r/PrintConfig.cpp:3827 #: src/libslic3r/PrintConfig.cpp:3838 msgid "Temperature" msgstr "温度" #: src/slic3r/GUI/GCodeViewer.cpp:2531 src/slic3r/GUI/GCodeViewer.cpp:2574 #: src/slic3r/GUI/GCodeViewer.cpp:2579 src/slic3r/GUI/GUI_ObjectList.cpp:322 #: src/slic3r/GUI/wxExtensions.cpp:543 src/libslic3r/PrintConfig.cpp:1040 msgid "Extruder" msgstr "挤出机" #: src/slic3r/GUI/GCodeViewer.cpp:2688 src/slic3r/GUI/GCodeViewer.cpp:2713 msgid "Print" msgstr "打印" #: src/slic3r/GUI/GCodeViewer.cpp:2757 src/slic3r/GUI/GUI_Preview.cpp:1136 #: src/libslic3r/PrintConfig.cpp:4026 msgid "Travel" msgstr "旅行" #: src/slic3r/GUI/GCodeViewer.cpp:2762 src/slic3r/GUI/Tab.cpp:2187 msgid "Retraction" msgstr "回抽" #: src/slic3r/GUI/GCodeViewer.cpp:2816 src/slic3r/GUI/GUI_Preview.cpp:1138 msgid "Retractions" msgstr "回抽" #: src/slic3r/GUI/GCodeViewer.cpp:2832 src/slic3r/GUI/GCodeViewer.cpp:2856 #: src/slic3r/GUI/Plater.cpp:698 src/libslic3r/PrintConfig.cpp:159 msgid "Printer" msgstr "打印机" #: src/slic3r/GUI/GCodeViewer.cpp:2834 src/slic3r/GUI/GCodeViewer.cpp:2861 #: src/slic3r/GUI/Plater.cpp:694 msgid "Print settings" msgstr "打印设置" #: src/slic3r/GUI/GCodeViewer.cpp:2892 src/slic3r/GUI/GCodeViewer.cpp:2897 #: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1135 #: src/slic3r/GUI/Plater.cpp:1248 msgid "Estimated printing time" msgstr "预计打印时间" #: src/slic3r/GUI/GCodeViewer.cpp:2892 msgid "Normal mode" msgstr "正常模式" #: src/slic3r/GUI/GCodeViewer.cpp:2897 msgid "Stealth mode" msgstr "隐身模式" #: src/slic3r/GUI/GLCanvas3D.cpp:254 msgid "Mouse wheel:" msgstr "鼠标滚动:" #: src/slic3r/GUI/GLCanvas3D.cpp:285 src/libslic3r/PrintConfig.cpp:1070 msgid "Radius" msgstr "半径" #: src/slic3r/GUI/GLCanvas3D.cpp:637 msgid "An object outside the print area was detected." msgstr "检测到打印区域外的对象." #: src/slic3r/GUI/GLCanvas3D.cpp:638 msgid "A toolpath outside the print area was detected." msgstr "检测到打印区域外的工具路径." #: src/slic3r/GUI/GLCanvas3D.cpp:639 msgid "SLA supports outside the print area were detected." msgstr "检测到打印区域外的 SLA 支撑." #: src/slic3r/GUI/GLCanvas3D.cpp:1891 msgid "Mirror Object" msgstr "镜像物体 Mirror Object" #: src/slic3r/GUI/GLCanvas3D.cpp:2761 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:520 msgid "Gizmo-Move" msgstr "Gizmo-移动" #: src/slic3r/GUI/GLCanvas3D.cpp:2847 #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:522 msgid "Gizmo-Rotate" msgstr "Gizmo-旋转" #: src/slic3r/GUI/GLCanvas3D.cpp:3406 msgid "Move Object" msgstr "移动对象" #: src/slic3r/GUI/GLCanvas3D.cpp:3927 msgid "Undo History" msgstr "撤销历史操作" #: src/slic3r/GUI/GLCanvas3D.cpp:3927 msgid "Redo History" msgstr "重做历史操作" #: src/slic3r/GUI/GLCanvas3D.cpp:3948 #, possible-c-format msgid "Undo %1$d Action" msgid_plural "Undo %1$d Actions" msgstr[0] "撤消 %1$d 操作" #: src/slic3r/GUI/GLCanvas3D.cpp:3948 #, possible-c-format msgid "Redo %1$d Action" msgid_plural "Redo %1$d Actions" msgstr[0] "重做 %1$d 操作" #: src/slic3r/GUI/GLCanvas3D.cpp:4078 src/slic3r/GUI/GLCanvas3D.cpp:4527 #: src/slic3r/GUI/KBShortcutsDialog.cpp:120 src/slic3r/GUI/Plater.cpp:1677 msgid "Arrange" msgstr "整理" #: src/slic3r/GUI/GLCanvas3D.cpp:4501 msgid "Add..." msgstr "添加..." #: src/slic3r/GUI/GLCanvas3D.cpp:4509 src/slic3r/GUI/GUI_ObjectList.cpp:1897 #: src/slic3r/GUI/Plater.cpp:4121 src/slic3r/GUI/Plater.cpp:4145 #: src/slic3r/GUI/Tab.cpp:3655 msgid "Delete" msgstr "删除" #: src/slic3r/GUI/GLCanvas3D.cpp:4518 src/slic3r/GUI/KBShortcutsDialog.cpp:88 #: src/slic3r/GUI/Plater.cpp:5291 msgid "Delete all" msgstr "全部删除" #: src/slic3r/GUI/GLCanvas3D.cpp:4527 src/slic3r/GUI/KBShortcutsDialog.cpp:121 msgid "Arrange selection" msgstr "整理选中的" #: src/slic3r/GUI/GLCanvas3D.cpp:4549 msgid "Copy" msgstr "复制" #: src/slic3r/GUI/GLCanvas3D.cpp:4558 msgid "Paste" msgstr "粘贴" #: src/slic3r/GUI/GLCanvas3D.cpp:4570 src/slic3r/GUI/Plater.cpp:3980 #: src/slic3r/GUI/Plater.cpp:3992 src/slic3r/GUI/Plater.cpp:4130 msgid "Add instance" msgstr "添加实例" #: src/slic3r/GUI/GLCanvas3D.cpp:4581 src/slic3r/GUI/Plater.cpp:4132 msgid "Remove instance" msgstr "删除实例" #: src/slic3r/GUI/GLCanvas3D.cpp:4594 msgid "Split to objects" msgstr "拆分为对象" #: src/slic3r/GUI/GLCanvas3D.cpp:4604 src/slic3r/GUI/GUI_ObjectList.cpp:1669 msgid "Split to parts" msgstr "拆分为零件" #: src/slic3r/GUI/GLCanvas3D.cpp:4706 src/slic3r/GUI/KBShortcutsDialog.cpp:89 #: src/slic3r/GUI/MainFrame.cpp:1343 msgid "Undo" msgstr "撤销" #: src/slic3r/GUI/GLCanvas3D.cpp:4729 #, possible-c-format msgid "Next Undo action: %1%" msgstr "下一个撤消操作： %1%" #: src/slic3r/GUI/GLCanvas3D.cpp:4745 src/slic3r/GUI/KBShortcutsDialog.cpp:90 #: src/slic3r/GUI/MainFrame.cpp:1346 msgid "Redo" msgstr "重做" #: src/slic3r/GUI/GLCanvas3D.cpp:4767 #, possible-c-format msgid "Next Redo action: %1%" msgstr "下一个重做操作： %1%" #: src/slic3r/GUI/GLCanvas3D.cpp:6397 msgid "Selection-Add from rectangle" msgstr "从矩形选择-添加" #: src/slic3r/GUI/GLCanvas3D.cpp:6416 msgid "Selection-Remove from rectangle" msgstr "从矩形中选择-删除" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:151 src/libslic3r/PrintConfig.cpp:6310 msgid "Cut" msgstr "剪切" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:185 msgid "Keep upper part" msgstr "保留上半部分" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:186 msgid "Keep lower part" msgstr "保留下半部分" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:187 msgid "Rotate lower part upwards" msgstr "旋转下部向上" #: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192 msgid "Perform cut" msgstr "执行切割" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:42 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:27 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:57 msgid "Clipping of view" msgstr "剪切视图" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:43 #: src/slic3r/GUI/Gizmos/GLGizmoHollow.cpp:50 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:28 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:58 msgid "Reset direction" msgstr "重置方向" #: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54 #: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39 #: src/slic3r/GUI/GUI_ObjectList.cpp:1644 #: src/slic3r/GUI/GUI_ObjectList.cpp:1656 msgid "Sphere" msgstr "球" #: src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp:40 msgid "Place on face" msgstr "放置在平面" #: src/slic3r/GUI/Gizmos/GLGizmoMove.cpp:64 msgid "Move" msgstr "移动" #: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:461 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:528 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563 #: src/libslic3r/PrintConfig.cpp:6362 msgid "Rotate" msgstr "旋转" #: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:78 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:548 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:564 #: src/libslic3r/PrintConfig.cpp:6377 msgid "Scale" msgstr "规模" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47 msgid "Head diameter" msgstr "头直径" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48 msgid "Lock supports under new islands" msgstr "新岛屿下的锁支撑" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218 msgid "Remove selected points" msgstr "删除所选点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50 msgid "Remove all points" msgstr "删除所有点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221 msgid "Apply changes" msgstr "应用更改" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222 msgid "Discard changes" msgstr "放弃更改" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53 msgid "Minimal points distance" msgstr "最小点距离" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54 #: src/libslic3r/PrintConfig.cpp:4958 msgid "Support points density" msgstr "支撑点密度" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:55 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1224 msgid "Auto-generate points" msgstr "自动生成点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:56 msgid "Manual editing" msgstr "手动编辑" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:374 msgid "Add support point" msgstr "添加支撑点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:514 msgid "Delete support point" msgstr "删除支撑点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:694 msgid "Change point head diameter" msgstr "改变支撑点的头直径" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:762 msgid "Support parameter change" msgstr "支撑参数更改" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:869 msgid "SLA Support Points" msgstr "SLA 支撑点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:897 msgid "SLA gizmo turned on" msgstr "SLA Gizmo 已打开" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:911 msgid "Do you want to save your manually edited support points?" msgstr "是否要保存手动编辑的支撑点？" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912 msgid "Save changes?" msgstr "保存更改吗？" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:924 msgid "SLA gizmo turned off" msgstr "SLA Gizmo 已关闭" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:955 msgid "Move support point" msgstr "移动支撑点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1048 msgid "Support points edit" msgstr "支撑点编辑" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129 #: src/slic3r/GUI/GUI.cpp:272 src/slic3r/GUI/PhysicalPrinterDialog.cpp:598 #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:622 #: src/slic3r/GUI/WipeTowerDialog.cpp:45 #: src/slic3r/GUI/WipeTowerDialog.cpp:366 msgid "Warning" msgstr "警告" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1134 msgid "Autogenerate support points" msgstr "自动生成支撑点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1181 msgid "SLA gizmo keyboard shortcuts" msgstr "SLA Gizmo 键盘快捷键" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1192 msgid "Note: some shortcuts work in (non)editing mode only." msgstr "注意:某些快捷方式仅在(非)编辑模式下工作。" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Left click" msgstr "左鍵單擊" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1210 msgid "Add point" msgstr "添加点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Right click" msgstr "右键点击" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1211 msgid "Remove point" msgstr "移除点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Drag" msgstr "拖动" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1212 msgid "Move point" msgstr "移动点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1213 msgid "Add point to selection" msgstr "将点添加到选择" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1214 msgid "Remove point from selection" msgstr "从选择中删除点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1215 msgid "Select by rectangle" msgstr "按矩形选择" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1216 msgid "Deselect by rectangle" msgstr "按矩形取消选择" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1217 msgid "Select all points" msgstr "选择所有点" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Mouse wheel" msgstr "鼠标滚动" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1219 msgid "Move clipping plane" msgstr "移动剪切平面" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1220 msgid "Reset clipping plane" msgstr "重置剪切平面" #: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1223 msgid "Switch to editing mode" msgstr "切换到编辑模式" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:521 msgid "Gizmo-Scale" msgstr "Gizmo-缩放" #: src/slic3r/GUI/Gizmos/GLGizmosManager.cpp:630 msgid "Gizmo-Place on Face" msgstr "Gizmo-放在面上" #: src/slic3r/GUI/GUI_App.cpp:605 #, possible-c-format msgid "" "%s has encountered an error. It was likely caused by running out of memory. " "If you are sure you have enough RAM on your system, this may also be a bug " "and we would be glad if you reported it.\n" "\n" "The application will now terminate." msgstr "" "%s 遇到错误。这可能是由于内存不足造成的。如果您确定您的系统上有足够的内存，这" "可能也是一个软件错误，欢迎你向我们提交问题报告。\n" "\n" "应用程序现在将终止。" #: src/slic3r/GUI/GUI_App.cpp:608 msgid "Fatal error" msgstr "致命错误" #: src/slic3r/GUI/GUI_App.cpp:1239 src/slic3r/GUI/GUI_App.cpp:1250 msgid "Recreating" msgstr "重造" #: src/slic3r/GUI/GUI_App.cpp:1255 msgid "Loading of current presets" msgstr "加载当前预设" #: src/slic3r/GUI/GUI_App.cpp:1260 msgid "Loading of a mode view" msgstr "加载模式视图" #: src/slic3r/GUI/GUI_App.cpp:1408 msgid "Choose one file (3MF/AMF):" msgstr "选择一个文件 (3MF/AMF):" #: src/slic3r/GUI/GUI_App.cpp:1420 msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):" msgstr "选择一个或多个文件 (STL/OBJ/AMF/3MF/PRUSA):" #: src/slic3r/GUI/GUI_App.cpp:1443 msgid "Changing of an application language" msgstr "更改应用程序语言" #: src/slic3r/GUI/GUI_App.cpp:1566 msgid "Select the language" msgstr "选择语言" #: src/slic3r/GUI/GUI_App.cpp:1566 msgid "Language" msgstr "语言" #: src/slic3r/GUI/GUI_App.cpp:1715 msgid "modified" msgstr "修改" #: src/slic3r/GUI/GUI_App.cpp:1764 #, possible-c-format msgid "Run %s" msgstr "运行 %s" #: src/slic3r/GUI/GUI_App.cpp:1768 msgid "&Configuration Snapshots" msgstr "&配置快照" #: src/slic3r/GUI/GUI_App.cpp:1768 msgid "Inspect / activate configuration snapshots" msgstr "检查/激活配置快照" #: src/slic3r/GUI/GUI_App.cpp:1769 msgid "Take Configuration &Snapshot" msgstr "保存配置 &快照" #: src/slic3r/GUI/GUI_App.cpp:1769 msgid "Capture a configuration snapshot" msgstr "捕获配置快照" #: src/slic3r/GUI/GUI_App.cpp:1773 msgid "&Preferences" msgstr "&首选项" #: src/slic3r/GUI/GUI_App.cpp:1779 msgid "Application preferences" msgstr "应用程序首选项" #: src/slic3r/GUI/GUI_App.cpp:1784 src/slic3r/GUI/wxExtensions.cpp:709 msgid "Simple" msgstr "简单" #: src/slic3r/GUI/GUI_App.cpp:1784 msgid "Simple View Mode" msgstr "简单界面模式" #: src/slic3r/GUI/GUI_App.cpp:1786 msgid "Advanced View Mode" msgstr "高级界面模式" #: src/slic3r/GUI/GUI_App.cpp:1787 src/slic3r/GUI/wxExtensions.cpp:712 msgid "Expert" msgstr "专家" #: src/slic3r/GUI/GUI_App.cpp:1787 msgid "Expert View Mode" msgstr "专家界面模式" #: src/slic3r/GUI/GUI_App.cpp:1792 msgid "Mode" msgstr "模式" #: src/slic3r/GUI/GUI_App.cpp:1792 #, possible-c-format msgid "%s View Mode" msgstr "%s 视图模式" #: src/slic3r/GUI/GUI_App.cpp:1798 msgid "Flash printer &firmware" msgstr "烧录打印机&固件" #: src/slic3r/GUI/GUI_App.cpp:1798 msgid "Upload a firmware image into an Arduino based printer" msgstr "将固件镜像上传到基于 arduino 的打印机" #: src/slic3r/GUI/GUI_App.cpp:1814 msgid "Taking configuration snapshot" msgstr "创建配置快照" #: src/slic3r/GUI/GUI_App.cpp:1814 msgid "Snapshot name" msgstr "快照名称" #: src/slic3r/GUI/GUI_App.cpp:1893 msgid "Language selection" msgstr "语言选择" #: src/slic3r/GUI/GUI_App.cpp:1895 msgid "" "Switching the language will trigger application restart.\n" "You will lose content of the plater." msgstr "" "切换语言将触发应用程序重新启动。\n" "您将丢失未保存的内容。" #: src/slic3r/GUI/GUI_App.cpp:1897 msgid "Do you want to proceed?" msgstr "是否继续？" #: src/slic3r/GUI/GUI_App.cpp:1924 msgid "&Configuration" msgstr "&配置" #: src/slic3r/GUI/GUI_App.cpp:2190 src/slic3r/GUI/Tab.cpp:3409 msgid "It's impossible to print multi-part object(s) with SLA technology." msgstr "无法使用 SLA 技术打印多部分对象。" #: src/slic3r/GUI/GUI_App.cpp:2191 msgid "Please check and fix your object list." msgstr "请检查并修复对象列表。" #: src/slic3r/GUI/GUI_App.cpp:2192 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210 #: src/slic3r/GUI/Plater.cpp:2447 src/slic3r/GUI/Tab.cpp:3411 msgid "Attention!" msgstr "注意！" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Start at height" msgstr "开始高度" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:29 msgid "Stop at height" msgstr "停止高度" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:161 msgid "Remove layer range" msgstr "移除图层范围" #: src/slic3r/GUI/GUI_ObjectLayers.cpp:165 msgid "Add layer range" msgstr "添加图层范围" #: src/slic3r/GUI/GUI_ObjectList.cpp:51 msgid "Add part" msgstr "添加部件" #: src/slic3r/GUI/GUI_ObjectList.cpp:52 msgid "Add modifier" msgstr "添加修改器" #: src/slic3r/GUI/GUI_ObjectList.cpp:53 msgid "Add support enforcer" msgstr "添加支撑生成器" #: src/slic3r/GUI/GUI_ObjectList.cpp:54 msgid "Add support blocker" msgstr "添加支撑屏蔽" #: src/slic3r/GUI/GUI_ObjectList.cpp:310 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161 msgid "Name" msgstr "名称" #: src/slic3r/GUI/GUI_ObjectList.cpp:326 src/slic3r/GUI/GUI_ObjectList.cpp:467 msgid "Editing" msgstr "编辑" #: src/slic3r/GUI/GUI_ObjectList.cpp:412 #, possible-c-format msgid "Auto-repaired (%d errors):" msgstr "自动修复 (%d 错误)::" #: src/slic3r/GUI/GUI_ObjectList.cpp:419 msgid "degenerate facets" msgstr "简并平面" #: src/slic3r/GUI/GUI_ObjectList.cpp:420 msgid "edges fixed" msgstr "修复边缘" #: src/slic3r/GUI/GUI_ObjectList.cpp:421 msgid "facets removed" msgstr "已移除平面" #: src/slic3r/GUI/GUI_ObjectList.cpp:422 msgid "facets added" msgstr "已添加平面" #: src/slic3r/GUI/GUI_ObjectList.cpp:423 msgid "facets reversed" msgstr "已反转平面" #: src/slic3r/GUI/GUI_ObjectList.cpp:424 msgid "backwards edges" msgstr "反向边缘" #: src/slic3r/GUI/GUI_ObjectList.cpp:432 msgid "Right button click the icon to fix STL through Netfabb" msgstr "右按钮单击图标, 通过 Netfabb 修复 STL" #: src/slic3r/GUI/GUI_ObjectList.cpp:469 msgid "Right button click the icon to change the object settings" msgstr "右键单击图标以更改对象设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:471 msgid "Click the icon to change the object settings" msgstr "单击图标可更改对象设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:475 msgid "Right button click the icon to change the object printable property" msgstr "右键单击图标以更改对象可打印属性" #: src/slic3r/GUI/GUI_ObjectList.cpp:477 msgid "Click the icon to change the object printable property" msgstr "单击图标可更改对象可打印属性" #: src/slic3r/GUI/GUI_ObjectList.cpp:600 msgid "Change Extruder" msgstr "更换挤出机" #: src/slic3r/GUI/GUI_ObjectList.cpp:615 msgid "Rename Object" msgstr "重命名对象" #: src/slic3r/GUI/GUI_ObjectList.cpp:615 msgid "Rename Sub-object" msgstr "重命名子对象" #: src/slic3r/GUI/GUI_ObjectList.cpp:1248 #: src/slic3r/GUI/GUI_ObjectList.cpp:4403 msgid "Instances to Separated Objects" msgstr "分隔对象的实例" #: src/slic3r/GUI/GUI_ObjectList.cpp:1263 msgid "Volumes in Object reordered" msgstr "重新排序的对象中的空间" #: src/slic3r/GUI/GUI_ObjectList.cpp:1263 msgid "Object reordered" msgstr "对象重新排序" #: src/slic3r/GUI/GUI_ObjectList.cpp:1340 #: src/slic3r/GUI/GUI_ObjectList.cpp:1712 #: src/slic3r/GUI/GUI_ObjectList.cpp:1718 #: src/slic3r/GUI/GUI_ObjectList.cpp:2101 #, possible-c-format msgid "Quick Add Settings (%s)" msgstr "快速添加设置 （%s）" #: src/slic3r/GUI/GUI_ObjectList.cpp:1434 msgid "Select showing settings" msgstr "选择显示设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:1483 msgid "Add Settings for Layers" msgstr "添加图层设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:1484 msgid "Add Settings for Sub-object" msgstr "添加子对象的设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:1485 msgid "Add Settings for Object" msgstr "添加对象的设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:1555 msgid "Add Settings Bundle for Height range" msgstr "为高度范围添加配置组" #: src/slic3r/GUI/GUI_ObjectList.cpp:1556 msgid "Add Settings Bundle for Sub-object" msgstr "为子对象添加配置组" #: src/slic3r/GUI/GUI_ObjectList.cpp:1557 msgid "Add Settings Bundle for Object" msgstr "为对象添加配置组" #: src/slic3r/GUI/GUI_ObjectList.cpp:1636 #: src/slic3r/GUI/GUI_ObjectList.cpp:1640 msgid "Box" msgstr "盒子" #: src/slic3r/GUI/GUI_ObjectList.cpp:1682 msgid "Height range Modifier" msgstr "高度范围修改器" #: src/slic3r/GUI/GUI_ObjectList.cpp:1691 msgid "Add settings" msgstr "添加设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:1769 msgid "Change type" msgstr "更改类型" #: src/slic3r/GUI/GUI_ObjectList.cpp:1779 #: src/slic3r/GUI/GUI_ObjectList.cpp:1791 msgid "Set as a Separated Object" msgstr "设置为独立的对象" #: src/slic3r/GUI/GUI_ObjectList.cpp:1791 msgid "Set as a Separated Objects" msgstr "设置为独立的对象" #: src/slic3r/GUI/GUI_ObjectList.cpp:1801 msgid "Printable" msgstr "可打印的" #: src/slic3r/GUI/GUI_ObjectList.cpp:1816 msgid "Rename" msgstr "重命名" #: src/slic3r/GUI/GUI_ObjectList.cpp:1827 msgid "Fix through the Netfabb" msgstr "通过Netfabb修复" #: src/slic3r/GUI/GUI_ObjectList.cpp:1837 src/slic3r/GUI/Plater.cpp:4158 msgid "Export as STL" msgstr "导出为 STL" #: src/slic3r/GUI/GUI_ObjectList.cpp:1851 msgid "Set extruder for selected items" msgstr "为选定的项设置挤出机" #: src/slic3r/GUI/GUI_ObjectList.cpp:1883 src/slic3r/Utils/Repetier.cpp:124 #: src/slic3r/Utils/Repetier.cpp:203 src/libslic3r/PrintConfig.cpp:618 #: src/libslic3r/PrintConfig.cpp:802 src/libslic3r/PrintConfig.cpp:1780 #: src/libslic3r/PrintConfig.cpp:2889 src/libslic3r/PrintConfig.cpp:3786 msgid "Default" msgstr "默认" #: src/slic3r/GUI/GUI_ObjectList.cpp:1903 msgid "Scale to print volume" msgstr "缩放打印体积" #: src/slic3r/GUI/GUI_ObjectList.cpp:1903 msgid "Scale the selected object to fit the print volume" msgstr "缩放所选对象以适合可打印体积" #: src/slic3r/GUI/GUI_ObjectList.cpp:1963 #: src/slic3r/GUI/GUI_ObjectList.cpp:1971 #: src/slic3r/GUI/GUI_ObjectList.cpp:2661 src/libslic3r/PrintConfig.cpp:6353 msgid "Merge" msgstr "合并" #: src/slic3r/GUI/GUI_ObjectList.cpp:2131 msgid "Load Part" msgstr "加载部件" #: src/slic3r/GUI/GUI_ObjectList.cpp:2245 msgid "Add Generic Subobject" msgstr "添加通用子对象" #: src/slic3r/GUI/GUI_ObjectList.cpp:2409 msgid "Delete Settings" msgstr "删除设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:2433 msgid "Delete All Instances from Object" msgstr "从对象中删除所有实例" #: src/slic3r/GUI/GUI_ObjectList.cpp:2449 msgid "Delete Height Range" msgstr "删除高度范围" #: src/slic3r/GUI/GUI_ObjectList.cpp:2481 msgid "From Object List You can't delete the last solid part from object." msgstr "从对象列表中无法从对象中删除最后一个实体零件。" #: src/slic3r/GUI/GUI_ObjectList.cpp:2485 msgid "Delete Subobject" msgstr "删除子对象" #: src/slic3r/GUI/GUI_ObjectList.cpp:2500 msgid "Last instance of an object cannot be deleted." msgstr "无法删除对象的最后一个实例。" #: src/slic3r/GUI/GUI_ObjectList.cpp:2504 msgid "Delete Instance" msgstr "删除实例" #: src/slic3r/GUI/GUI_ObjectList.cpp:2528 src/slic3r/GUI/Plater.cpp:2968 msgid "" "The selected object couldn't be split because it contains only one part." msgstr "无法拆分所选对象，因为它仅包含一个部件。" #: src/slic3r/GUI/GUI_ObjectList.cpp:2532 msgid "Split to Parts" msgstr "拆分为零件" #: src/slic3r/GUI/GUI_ObjectList.cpp:2784 msgid "Add Layers" msgstr "添加图层" #: src/slic3r/GUI/GUI_ObjectList.cpp:2938 msgid "Group manipulation" msgstr "操作组" #: src/slic3r/GUI/GUI_ObjectList.cpp:2950 msgid "Object manipulation" msgstr "操作对象" #: src/slic3r/GUI/GUI_ObjectList.cpp:2963 msgid "Object Settings to modify" msgstr "要修改的对象设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:2967 msgid "Part Settings to modify" msgstr "要修改的零件设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:2972 msgid "Layer range Settings to modify" msgstr "要修改的图层范围设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:2978 msgid "Part manipulation" msgstr "零件操作" #: src/slic3r/GUI/GUI_ObjectList.cpp:2984 msgid "Instance manipulation" msgstr "实例操作" #: src/slic3r/GUI/GUI_ObjectList.cpp:2991 msgid "Height ranges" msgstr "高度范围" #: src/slic3r/GUI/GUI_ObjectList.cpp:2991 msgid "Settings for height range" msgstr "高度范围设置" #: src/slic3r/GUI/GUI_ObjectList.cpp:3175 msgid "Delete Selected Item" msgstr "删除所选项目" #: src/slic3r/GUI/GUI_ObjectList.cpp:3363 msgid "Delete Selected" msgstr "删除所选" #: src/slic3r/GUI/GUI_ObjectList.cpp:3439 #: src/slic3r/GUI/GUI_ObjectList.cpp:3467 #: src/slic3r/GUI/GUI_ObjectList.cpp:3487 msgid "Add Height Range" msgstr "添加高度范围" #: src/slic3r/GUI/GUI_ObjectList.cpp:3601 msgid "Edit Height Range" msgstr "编辑高度范围" #: src/slic3r/GUI/GUI_ObjectList.cpp:3896 msgid "Selection-Remove from list" msgstr "从列表中选择-删除" #: src/slic3r/GUI/GUI_ObjectList.cpp:3904 msgid "Selection-Add from list" msgstr "从列表中选择-添加" #: src/slic3r/GUI/GUI_ObjectList.cpp:4039 msgid "Object or Instance" msgstr "对象或实例" #: src/slic3r/GUI/GUI_ObjectList.cpp:4040 #: src/slic3r/GUI/GUI_ObjectList.cpp:4173 msgid "Part" msgstr "部件" #: src/slic3r/GUI/GUI_ObjectList.cpp:4040 msgid "Layer" msgstr "层" #: src/slic3r/GUI/GUI_ObjectList.cpp:4042 msgid "Unsupported selection" msgstr "不支持的选择" #: src/slic3r/GUI/GUI_ObjectList.cpp:4043 #, possible-c-format msgid "You started your selection with %s Item." msgstr "你从 %s 项开始选择。" #: src/slic3r/GUI/GUI_ObjectList.cpp:4044 #, possible-c-format msgid "In this mode you can select only other %s Items%s" msgstr "在此模式下，您只能选择其他 %s 项%s" #: src/slic3r/GUI/GUI_ObjectList.cpp:4047 msgid "of a current Object" msgstr "当前对象的" #: src/slic3r/GUI/GUI_ObjectList.cpp:4052 #: src/slic3r/GUI/GUI_ObjectList.cpp:4127 src/slic3r/GUI/Plater.cpp:143 msgid "Info" msgstr "信息" #: src/slic3r/GUI/GUI_ObjectList.cpp:4168 msgid "You can't change a type of the last solid part of the object." msgstr "不能更改对象的最后一个实体部分的类型。" #: src/slic3r/GUI/GUI_ObjectList.cpp:4173 msgid "Modifier" msgstr "修改器 Modifier" #: src/slic3r/GUI/GUI_ObjectList.cpp:4173 msgid "Support Enforcer" msgstr "支撑添加器" #: src/slic3r/GUI/GUI_ObjectList.cpp:4173 msgid "Support Blocker" msgstr "支撑去除器" #: src/slic3r/GUI/GUI_ObjectList.cpp:4175 msgid "Select type of part" msgstr "选择零件类型" #: src/slic3r/GUI/GUI_ObjectList.cpp:4180 msgid "Change Part Type" msgstr "更改零件类型" #: src/slic3r/GUI/GUI_ObjectList.cpp:4425 msgid "Enter new name" msgstr "输入新名称" #: src/slic3r/GUI/GUI_ObjectList.cpp:4425 msgid "Renaming" msgstr "重命名" #: src/slic3r/GUI/GUI_ObjectList.cpp:4441 #: src/slic3r/GUI/GUI_ObjectList.cpp:4568 #: src/slic3r/GUI/SavePresetDialog.cpp:101 #: src/slic3r/GUI/SavePresetDialog.cpp:109 msgid "The supplied name is not valid;" msgstr "提供的名称无效;" #: src/slic3r/GUI/GUI_ObjectList.cpp:4442 #: src/slic3r/GUI/GUI_ObjectList.cpp:4569 #: src/slic3r/GUI/SavePresetDialog.cpp:102 msgid "the following characters are not allowed:" msgstr "不允许使用以下字符：" #: src/slic3r/GUI/GUI_ObjectList.cpp:4617 msgid "Select extruder number:" msgstr "选择挤出机编号：" #: src/slic3r/GUI/GUI_ObjectList.cpp:4618 msgid "This extruder will be set for selected items" msgstr "将为所选项目设置此挤出机" #: src/slic3r/GUI/GUI_ObjectList.cpp:4740 src/slic3r/GUI/Selection.cpp:1485 msgid "Set Printable" msgstr "设置可打印" #: src/slic3r/GUI/GUI_ObjectList.cpp:4740 src/slic3r/GUI/Selection.cpp:1485 msgid "Set Unprintable" msgstr "设置不可打印" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:68 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:111 msgid "World coordinates" msgstr "世界坐标" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:69 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:112 msgid "Local coordinates" msgstr "本地坐标" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:88 msgid "Select coordinate space, in which the transformation will be performed." msgstr "选择坐标空间，将在其中执行转换。" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:588 msgid "Object name" msgstr "对象名称" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:223 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506 msgid "Position" msgstr "位置" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:224 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507 #: src/slic3r/GUI/Mouse3DController.cpp:486 #: src/slic3r/GUI/Mouse3DController.cpp:507 msgid "Rotation" msgstr "旋转" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:271 #, possible-c-format msgid "Toggle %c axis mirroring" msgstr "切换 %c 轴镜像" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:305 msgid "Set Mirror" msgstr "设置镜像" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:345 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:357 msgid "Drop to bed" msgstr "放到床上" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:372 msgid "Reset rotation" msgstr "重置旋转" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:394 msgid "Reset Rotation" msgstr "重置旋转" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:407 #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:409 msgid "Reset scale" msgstr "重置比例" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:508 msgid "Scale factors" msgstr "缩放比例因子" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562 msgid "Translate" msgstr "翻译" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:626 msgid "" "You cannot use non-uniform scaling mode for multiple objects/parts selection" msgstr "不能对多个对象/零件选择使用非均匀缩放模式" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:798 msgid "Set Position" msgstr "设置位置" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:829 msgid "Set Orientation" msgstr "设置方向" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:894 msgid "Set Scale" msgstr "设置缩放 Set Scale" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:926 msgid "" "The currently manipulated object is tilted (rotation angles are not " "multiples of 90°).\n" "Non-uniform scaling of tilted objects is only possible in the World " "coordinate system,\n" "once the rotation is embedded into the object coordinates." msgstr "" "当前操作的对象是倾斜的(旋转角度不是 90° 的倍数)。\n" "倾斜对象的非均匀缩放只能将旋转嵌入到对象的坐标中后,\n" "在世界坐标系中进行。" #: src/slic3r/GUI/GUI_ObjectManipulation.cpp:929 msgid "" "This operation is irreversible.\n" "Do you want to proceed?" msgstr "" "此操作是不可逆的。\n" "是否要继续？" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:62 msgid "Additional Settings" msgstr "其他设置" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:98 msgid "Remove parameter" msgstr "删除参数" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:104 #, possible-c-format msgid "Delete Option %s" msgstr "删除选项 %s" #: src/slic3r/GUI/GUI_ObjectSettings.cpp:163 #, possible-c-format msgid "Change Option %s" msgstr "更改选项 %s" #: src/slic3r/GUI/GUI_Preview.cpp:242 msgid "View" msgstr "查看" #: src/slic3r/GUI/GUI_Preview.cpp:245 src/libslic3r/PrintConfig.cpp:1057 msgid "Height" msgstr "高度" #: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/PrintConfig.cpp:1686 #: src/libslic3r/PrintConfig.cpp:4178 msgid "Width" msgstr "宽度" #: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/PrintConfig.cpp:3261 msgid "Speed" msgstr "速度" #: src/slic3r/GUI/GUI_Preview.cpp:248 src/slic3r/GUI/PresetHints.cpp:41 msgid "Fan" msgstr "扇形" #: src/slic3r/GUI/GUI_Preview.cpp:248 msgid "Fan speed" msgstr "风扇速度" #: src/slic3r/GUI/GUI_Preview.cpp:249 msgid "time" msgstr "时间" #: src/slic3r/GUI/GUI_Preview.cpp:252 msgid "Volumetric flow rate" msgstr "体积流量" #: src/slic3r/GUI/GUI_Preview.cpp:255 src/slic3r/GUI/Plater.cpp:1163 #: src/slic3r/GUI/Plater.cpp:1167 src/slic3r/GUI/Plater.cpp:1182 #: src/slic3r/GUI/Plater.cpp:1187 src/libslic3r/PrintConfig.cpp:83 #: src/libslic3r/PrintConfig.cpp:1202 msgid "Color" msgstr "颜色" #: src/slic3r/GUI/GUI_Preview.cpp:261 msgid "Show" msgstr "显示" #: src/slic3r/GUI/GUI_Preview.cpp:263 src/slic3r/GUI/GUI_Preview.cpp:284 msgid "Feature types" msgstr "功能类型" #: src/slic3r/GUI/GUI_Preview.cpp:267 src/libslic3r/ExtrusionEntity.cpp:271 #: src/libslic3r/ExtrusionEntity.cpp:298 msgid "Perimeter" msgstr "周长" #: src/slic3r/GUI/GUI_Preview.cpp:268 src/libslic3r/ExtrusionEntity.cpp:272 #: src/libslic3r/ExtrusionEntity.cpp:300 msgid "External perimeter" msgstr "外部轮廓" #: src/slic3r/GUI/GUI_Preview.cpp:269 src/libslic3r/ExtrusionEntity.cpp:273 #: src/libslic3r/ExtrusionEntity.cpp:302 msgid "Overhang perimeter" msgstr "悬空轮廓" #: src/slic3r/GUI/GUI_Preview.cpp:270 src/libslic3r/ExtrusionEntity.cpp:274 #: src/libslic3r/ExtrusionEntity.cpp:304 msgid "Internal infill" msgstr "内部填充" #: src/slic3r/GUI/GUI_Preview.cpp:271 src/libslic3r/ExtrusionEntity.cpp:275 #: src/libslic3r/ExtrusionEntity.cpp:306 src/libslic3r/PrintConfig.cpp:3384 msgid "Solid infill" msgstr "实心填充" #: src/slic3r/GUI/GUI_Preview.cpp:272 src/libslic3r/ExtrusionEntity.cpp:276 #: src/libslic3r/ExtrusionEntity.cpp:308 src/libslic3r/PrintConfig.cpp:3961 msgid "Top solid infill" msgstr "顶部实心填充" #: src/slic3r/GUI/GUI_Preview.cpp:273 src/libslic3r/ExtrusionEntity.cpp:278 #: src/libslic3r/ExtrusionEntity.cpp:312 msgid "Bridge infill" msgstr "搭桥填充" #: src/slic3r/GUI/GUI_Preview.cpp:276 src/libslic3r/ExtrusionEntity.cpp:281 #: src/libslic3r/ExtrusionEntity.cpp:318 src/libslic3r/PrintConfig.cpp:1863 msgid "Gap fill" msgstr "间隙填充" #: src/slic3r/GUI/GUI_Preview.cpp:277 src/libslic3r/ExtrusionEntity.cpp:282 #: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/PrintConfig.cpp:3220 msgid "Skirt" msgstr "裙边" #: src/slic3r/GUI/GUI_Preview.cpp:278 src/libslic3r/ExtrusionEntity.cpp:283 #: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/PrintConfig.cpp:3679 msgid "Support material" msgstr "支撑材料" #: src/slic3r/GUI/GUI_Preview.cpp:279 src/libslic3r/ExtrusionEntity.cpp:284 #: src/libslic3r/ExtrusionEntity.cpp:324 msgid "Support material interface" msgstr "支撑材料端口" #: src/slic3r/GUI/GUI_Preview.cpp:280 src/libslic3r/ExtrusionEntity.cpp:285 #: src/libslic3r/ExtrusionEntity.cpp:326 msgid "Wipe tower" msgstr "擦料塔" #: src/slic3r/GUI/GUI_Preview.cpp:1144 msgid "Shells" msgstr "壳" #: src/slic3r/GUI/GUI_Preview.cpp:1146 msgid "Legend" msgstr "图例" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:146 msgid "Arranging" msgstr "自动布局" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:177 msgid "Could not arrange model objects! Some geometries may be invalid." msgstr "无法排列模型对象！某些几何图形可能无效。" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:183 msgid "Arranging canceled." msgstr "排列布局已取消。" #: src/slic3r/GUI/Jobs/ArrangeJob.cpp:184 msgid "Arranging done." msgstr "布局完成." #: src/slic3r/GUI/Jobs/Job.cpp:75 msgid "ERROR: not enough resources to execute a new job." msgstr "错误:没有足够的资源来执行新作业。" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41 msgid "Searching for optimal orientation" msgstr "搜索最佳方向" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73 msgid "Orientation search canceled." msgstr "方向搜索已取消。" #: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74 msgid "Orientation found." msgstr "找到方向。" #: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2446 #: src/slic3r/GUI/Tab.cpp:3410 msgid "Please check your object list before preset changing." msgstr "请在预设更改之前检查对象列表。" #: src/slic3r/GUI/KBShortcutsDialog.cpp:17 src/slic3r/GUI/MainFrame.cpp:1108 msgid "Keyboard Shortcuts" msgstr "键盘快捷键" #: src/slic3r/GUI/KBShortcutsDialog.cpp:71 msgid "Save project (3mf)" msgstr "保存项目 (3MF)" #: src/slic3r/GUI/KBShortcutsDialog.cpp:73 msgid "(Re)slice" msgstr "重新切片" #: src/slic3r/GUI/KBShortcutsDialog.cpp:79 src/slic3r/GUI/Plater.cpp:771 #: src/slic3r/GUI/Plater.cpp:6255 src/libslic3r/PrintConfig.cpp:6255 msgid "Export G-code" msgstr "导出 G-code" #: src/slic3r/GUI/KBShortcutsDialog.cpp:80 src/slic3r/GUI/Plater.cpp:6256 msgid "Send G-code" msgstr "发送 G 代码" #: src/slic3r/GUI/KBShortcutsDialog.cpp:85 msgid "Select all objects" msgstr "选择所有对象" #: src/slic3r/GUI/KBShortcutsDialog.cpp:87 msgid "Delete selected" msgstr "删除所选" #: src/slic3r/GUI/KBShortcutsDialog.cpp:91 msgid "Copy to clipboard" msgstr "复制到剪贴板" #: src/slic3r/GUI/KBShortcutsDialog.cpp:92 msgid "Paste from clipboard" msgstr "從剪貼板粘貼" #: src/slic3r/GUI/KBShortcutsDialog.cpp:103 msgid "Select Print Settings Tab" msgstr "选择 打印设置 选项卡" #: src/slic3r/GUI/KBShortcutsDialog.cpp:104 msgid "Select Filament Settings Tab" msgstr "选择 耗材设置 选项卡" #: src/slic3r/GUI/KBShortcutsDialog.cpp:105 msgid "Select Printer Settings Tab" msgstr "选择 打印机设置 选项卡" #: src/slic3r/GUI/KBShortcutsDialog.cpp:106 #: src/slic3r/GUI/PrintHostDialogs.cpp:178 msgid "Print host upload queue" msgstr "打印主机上传队列" #: src/slic3r/GUI/KBShortcutsDialog.cpp:109 msgid "Camera view" msgstr "摄像机视图" #: src/slic3r/GUI/KBShortcutsDialog.cpp:112 src/slic3r/GUI/Preferences.cpp:13 msgid "Preferences" msgstr "首选项" #: src/slic3r/GUI/KBShortcutsDialog.cpp:114 msgid "Show keyboard shortcuts list" msgstr "显示键盘快捷键列表" #: src/slic3r/GUI/KBShortcutsDialog.cpp:122 msgid "Add Instance of the selected object" msgstr "添加所选对象的实例" #: src/slic3r/GUI/KBShortcutsDialog.cpp:123 msgid "Remove Instance of the selected object" msgstr "删除所选对象的实例" #: src/slic3r/GUI/KBShortcutsDialog.cpp:127 #: src/slic3r/GUI/KBShortcutsDialog.cpp:196 #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 #: src/slic3r/GUI/KBShortcutsDialog.cpp:219 #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 #: src/slic3r/GUI/KBShortcutsDialog.cpp:243 msgid "Arrow Up" msgstr "上箭头" #: src/slic3r/GUI/KBShortcutsDialog.cpp:128 #: src/slic3r/GUI/KBShortcutsDialog.cpp:197 #: src/slic3r/GUI/KBShortcutsDialog.cpp:208 #: src/slic3r/GUI/KBShortcutsDialog.cpp:220 #: src/slic3r/GUI/KBShortcutsDialog.cpp:227 #: src/slic3r/GUI/KBShortcutsDialog.cpp:244 msgid "Arrow Down" msgstr "上箭头" #: src/slic3r/GUI/KBShortcutsDialog.cpp:129 #: src/slic3r/GUI/KBShortcutsDialog.cpp:198 #: src/slic3r/GUI/KBShortcutsDialog.cpp:221 #: src/slic3r/GUI/KBShortcutsDialog.cpp:228 #: src/slic3r/GUI/KBShortcutsDialog.cpp:241 #: src/slic3r/GUI/KBShortcutsDialog.cpp:246 msgid "Arrow Left" msgstr "左箭头" #: src/slic3r/GUI/KBShortcutsDialog.cpp:130 #: src/slic3r/GUI/KBShortcutsDialog.cpp:199 #: src/slic3r/GUI/KBShortcutsDialog.cpp:222 #: src/slic3r/GUI/KBShortcutsDialog.cpp:229 #: src/slic3r/GUI/KBShortcutsDialog.cpp:242 #: src/slic3r/GUI/KBShortcutsDialog.cpp:247 msgid "Arrow Right" msgstr "右箭头" #: src/slic3r/GUI/KBShortcutsDialog.cpp:135 msgid "Gizmo move" msgstr "线框移动" #: src/slic3r/GUI/KBShortcutsDialog.cpp:136 msgid "Gizmo scale" msgstr "线框缩放" #: src/slic3r/GUI/KBShortcutsDialog.cpp:137 msgid "Gizmo rotate" msgstr "旋转小物件" #: src/slic3r/GUI/KBShortcutsDialog.cpp:138 msgid "Gizmo cut" msgstr "剪切小物件" #: src/slic3r/GUI/KBShortcutsDialog.cpp:139 msgid "Gizmo Place face on bed" msgstr "放置小物件面到热床" #: src/slic3r/GUI/KBShortcutsDialog.cpp:141 msgid "Gizmo SLA support points" msgstr "小物件SLA支撑点" #: src/slic3r/GUI/KBShortcutsDialog.cpp:143 msgid "Change camera type (perspective, orthographic)" msgstr "更改摄像机类型（透视、正交）" #: src/slic3r/GUI/KBShortcutsDialog.cpp:144 msgid "Zoom to Bed" msgstr "缩放至热床" #: src/slic3r/GUI/KBShortcutsDialog.cpp:146 msgid "Zoom in" msgstr "放大" #: src/slic3r/GUI/KBShortcutsDialog.cpp:147 msgid "Zoom out" msgstr "缩小" #: src/slic3r/GUI/KBShortcutsDialog.cpp:167 src/slic3r/GUI/MainFrame.cpp:373 #: src/slic3r/GUI/MainFrame.cpp:458 msgid "Plater" msgstr "构建板" #: src/slic3r/GUI/KBShortcutsDialog.cpp:207 msgid "Upper layer" msgstr "上层" #: src/slic3r/GUI/KBShortcutsDialog.cpp:208 msgid "Lower layer" msgstr "下层" #: src/slic3r/GUI/KBShortcutsDialog.cpp:209 msgid "Upper Layer" msgstr "上层" #: src/slic3r/GUI/KBShortcutsDialog.cpp:210 msgid "Lower Layer" msgstr "下层" #: src/slic3r/GUI/KBShortcutsDialog.cpp:215 src/slic3r/GUI/Plater.cpp:4323 msgid "Preview" msgstr "预览" #: src/slic3r/GUI/KBShortcutsDialog.cpp:223 #: src/slic3r/GUI/KBShortcutsDialog.cpp:230 msgid "Add color change marker for current layer" msgstr "为当前图层添加颜色更改标记" #: src/slic3r/GUI/KBShortcutsDialog.cpp:224 #: src/slic3r/GUI/KBShortcutsDialog.cpp:231 msgid "Delete color change marker for current layer" msgstr "删除当前图层的颜色更改标记" #: src/slic3r/GUI/KBShortcutsDialog.cpp:226 msgid "Move current slider thumb Up" msgstr "向上移动当前滑块" #: src/slic3r/GUI/KBShortcutsDialog.cpp:227 msgid "Move current slider thumb Down" msgstr "向下移动当前滑块" #: src/slic3r/GUI/KBShortcutsDialog.cpp:228 msgid "Set upper thumb to current slider thumb" msgstr "将上设置为当前滑块" #: src/slic3r/GUI/KBShortcutsDialog.cpp:229 msgid "Set lower thumb to current slider thumb" msgstr "将下设置为当前滑块" #: src/slic3r/GUI/MainFrame.cpp:1093 msgid "System &Info" msgstr "系统&信息" #: src/slic3r/GUI/MainFrame.cpp:1093 msgid "Show system information" msgstr "显示系统信息" #: src/slic3r/GUI/MainFrame.cpp:1095 msgid "Show &Configuration Folder" msgstr "显示&配置文件夹" #: src/slic3r/GUI/MainFrame.cpp:1095 msgid "Show user configuration folder (datadir)" msgstr "显示用户配置文件夹（数据目录）" #: src/slic3r/GUI/MainFrame.cpp:1097 msgid "Report an I&ssue" msgstr "报告&问题" #: src/slic3r/GUI/MainFrame.cpp:1097 #, possible-c-format msgid "Report an issue on %s" msgstr "报告 %s 上的问题" #: src/slic3r/GUI/MainFrame.cpp:1101 src/slic3r/GUI/MainFrame.cpp:1104 #, possible-c-format msgid "&About %s" msgstr "&关于 %s" #: src/slic3r/GUI/MainFrame.cpp:1101 src/slic3r/GUI/MainFrame.cpp:1104 msgid "Show about dialog" msgstr "关于对话框" #: src/slic3r/GUI/MainFrame.cpp:1108 msgid "Show the list of the keyboard shortcuts" msgstr "显示键盘快捷键的列表" #: src/slic3r/GUI/MainFrame.cpp:1122 msgid "Iso" msgstr "Iso" #: src/slic3r/GUI/MainFrame.cpp:1122 msgid "Iso View" msgstr "Iso 视图" #. TRN To be shown in the main menu View->Top #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:1126 src/libslic3r/PrintConfig.cpp:706 #: src/libslic3r/PrintConfig.cpp:3630 src/libslic3r/PrintConfig.cpp:4005 #: src/libslic3r/PrintConfig.cpp:4015 msgid "Top" msgstr "顶部" #: src/slic3r/GUI/MainFrame.cpp:1126 msgid "Top View" msgstr "顶部视图" #. TRN To be shown in the main menu View->Bottom #. TRN To be shown in Print Settings "Bottom solid layers" #. TRN To be shown in Print Settings "Top solid layers" #: src/slic3r/GUI/MainFrame.cpp:1129 src/libslic3r/PrintConfig.cpp:284 #: src/libslic3r/PrintConfig.cpp:292 src/libslic3r/PrintConfig.cpp:737 #: src/libslic3r/PrintConfig.cpp:3645 msgid "Bottom" msgstr "底部" #: src/slic3r/GUI/MainFrame.cpp:1129 msgid "Bottom View" msgstr "底部视图" #: src/slic3r/GUI/MainFrame.cpp:1131 msgid "Front" msgstr "前面" #: src/slic3r/GUI/MainFrame.cpp:1131 msgid "Front View" msgstr "正视图" #: src/slic3r/GUI/MainFrame.cpp:1133 src/libslic3r/PrintConfig.cpp:989 #: src/libslic3r/PrintConfig.cpp:3152 msgid "Rear" msgstr "背面" #: src/slic3r/GUI/MainFrame.cpp:1133 msgid "Rear View" msgstr "后视图" #: src/slic3r/GUI/MainFrame.cpp:1135 msgid "Left" msgstr "左" #: src/slic3r/GUI/MainFrame.cpp:1135 msgid "Left View" msgstr "左视图" #: src/slic3r/GUI/MainFrame.cpp:1137 msgid "Right" msgstr "右" #: src/slic3r/GUI/MainFrame.cpp:1137 msgid "Right View" msgstr "右视图" #: src/slic3r/GUI/MainFrame.cpp:1150 msgid "&New Project" msgstr "&新建项目" #: src/slic3r/GUI/MainFrame.cpp:1150 msgid "Start a new project" msgstr "启动一个新项目" #: src/slic3r/GUI/MainFrame.cpp:1153 msgid "&Open Project" msgstr "&打开项目" #: src/slic3r/GUI/MainFrame.cpp:1153 msgid "Open a project file" msgstr "打开项目文件" #: src/slic3r/GUI/MainFrame.cpp:1158 msgid "Recent projects" msgstr "近期项目" #: src/slic3r/GUI/MainFrame.cpp:1167 src/slic3r/GUI/MainFrame.cpp:1599 #: src/slic3r/GUI/PrintHostDialogs.cpp:276 msgid "Error" msgstr "错误" #: src/slic3r/GUI/MainFrame.cpp:1192 msgid "&Save Project" msgstr "&保存项目" #: src/slic3r/GUI/MainFrame.cpp:1192 msgid "Save current project file" msgstr "保存当前项目文件" #: src/slic3r/GUI/MainFrame.cpp:1196 src/slic3r/GUI/MainFrame.cpp:1198 msgid "Save Project &as" msgstr "将项目另存 &为" #: src/slic3r/GUI/MainFrame.cpp:1196 src/slic3r/GUI/MainFrame.cpp:1198 msgid "Save current project file as" msgstr "将当前项目文件另存为" #: src/slic3r/GUI/MainFrame.cpp:1206 msgid "Import STL/OBJ/AM&F/3MF" msgstr "导入 STL/OBJ/AM&F/3MF" #: src/slic3r/GUI/MainFrame.cpp:1206 msgid "Load a model" msgstr "加载模型" #: src/slic3r/GUI/MainFrame.cpp:1219 msgid "Import &Config" msgstr "导入&配置" #: src/slic3r/GUI/MainFrame.cpp:1219 msgid "Load exported configuration file" msgstr "加载导出的配置文件" #: src/slic3r/GUI/MainFrame.cpp:1222 msgid "Import Config from &project" msgstr "从 &项目 导入配置" #: src/slic3r/GUI/MainFrame.cpp:1222 msgid "Load configuration from project file" msgstr "从项目文件加载配置" #: src/slic3r/GUI/MainFrame.cpp:1226 msgid "Import Config &Bundle" msgstr "导入配置&组" #: src/slic3r/GUI/MainFrame.cpp:1226 msgid "Load presets from a bundle" msgstr "从包加载预设" #: src/slic3r/GUI/MainFrame.cpp:1229 msgid "&Import" msgstr "导入(&I)" #: src/slic3r/GUI/MainFrame.cpp:1232 src/slic3r/GUI/MainFrame.cpp:1561 msgid "Export &G-code" msgstr "导出 &G-code" #: src/slic3r/GUI/MainFrame.cpp:1232 msgid "Export current plate as G-code" msgstr "将当构建板导出为 G-code" #: src/slic3r/GUI/MainFrame.cpp:1236 src/slic3r/GUI/MainFrame.cpp:1562 msgid "S&end G-code" msgstr "发&送 G 代码" #: src/slic3r/GUI/MainFrame.cpp:1236 msgid "Send to print current plate as G-code" msgstr "发送以 G 代码打印当前板" #: src/slic3r/GUI/MainFrame.cpp:1244 msgid "Export plate as &STL" msgstr "导出构建板为 &STL" #: src/slic3r/GUI/MainFrame.cpp:1244 msgid "Export current plate as STL" msgstr "将当前构建板导出为 STL" #: src/slic3r/GUI/MainFrame.cpp:1247 msgid "Export plate as STL &including supports" msgstr "导出构建板为 STL &包括支撑" #: src/slic3r/GUI/MainFrame.cpp:1247 msgid "Export current plate as STL including supports" msgstr "导出当前构建板为 STL,包括支撑" #: src/slic3r/GUI/MainFrame.cpp:1250 msgid "Export plate as &AMF" msgstr "导出构建板为 &AMF" #: src/slic3r/GUI/MainFrame.cpp:1250 msgid "Export current plate as AMF" msgstr "将当构建板导出为 AMF" #: src/slic3r/GUI/MainFrame.cpp:1254 src/slic3r/GUI/MainFrame.cpp:1513 msgid "Export &toolpaths as OBJ" msgstr "导出 &挤出头路径为 OBJ" #: src/slic3r/GUI/MainFrame.cpp:1254 src/slic3r/GUI/MainFrame.cpp:1513 msgid "Export toolpaths as OBJ" msgstr "导出挤出头路径作为 OBJ" #: src/slic3r/GUI/MainFrame.cpp:1258 msgid "Export &Config" msgstr "导出&配置" #: src/slic3r/GUI/MainFrame.cpp:1258 msgid "Export current configuration to file" msgstr "将当前配置导出到文件" #: src/slic3r/GUI/MainFrame.cpp:1261 msgid "Export Config &Bundle" msgstr "导出配置&包" #: src/slic3r/GUI/MainFrame.cpp:1261 msgid "Export all presets to file" msgstr "将所有预设导出到文件" #: src/slic3r/GUI/MainFrame.cpp:1271 msgid "&Export" msgstr "导出(&E)" #: src/slic3r/GUI/MainFrame.cpp:1281 msgid "Quick Slice" msgstr "快速切片" #: src/slic3r/GUI/MainFrame.cpp:1281 msgid "Slice a file into a G-code" msgstr "将文件切片成 G-code" #: src/slic3r/GUI/MainFrame.cpp:1287 msgid "Quick Slice and Save As" msgstr "快速切片并另存为" #: src/slic3r/GUI/MainFrame.cpp:1287 msgid "Slice a file into a G-code, save as" msgstr "将文件切片成 G-code, 并另存为" #: src/slic3r/GUI/MainFrame.cpp:1293 msgid "Repeat Last Quick Slice" msgstr "重复上次快速切片" #: src/slic3r/GUI/MainFrame.cpp:1293 msgid "Repeat last quick slice" msgstr "重复最后一个快速切片" #: src/slic3r/GUI/MainFrame.cpp:1301 msgid "(Re)Slice No&w" msgstr "立即重切片" #: src/slic3r/GUI/MainFrame.cpp:1301 msgid "Start new slicing process" msgstr "开始新的切片流程" #: src/slic3r/GUI/MainFrame.cpp:1305 msgid "&Repair STL file" msgstr "&修复 STL 文件" #: src/slic3r/GUI/MainFrame.cpp:1305 msgid "Automatically repair an STL file" msgstr "自动修复 STL 文件" #: src/slic3r/GUI/MainFrame.cpp:1312 src/slic3r/GUI/MainFrame.cpp:1520 msgid "&Quit" msgstr "&退出" #: src/slic3r/GUI/MainFrame.cpp:1312 src/slic3r/GUI/MainFrame.cpp:1520 #, possible-c-format msgid "Quit %s" msgstr "退出 %s" #: src/slic3r/GUI/MainFrame.cpp:1327 msgid "&Select all" msgstr "&选择所有" #: src/slic3r/GUI/MainFrame.cpp:1328 msgid "Selects all objects" msgstr "选择所有对象" #: src/slic3r/GUI/MainFrame.cpp:1330 msgid "D&eselect all" msgstr "反&选所有" #: src/slic3r/GUI/MainFrame.cpp:1331 msgid "Deselects all objects" msgstr "取消选择所有对象" #: src/slic3r/GUI/MainFrame.cpp:1334 msgid "&Delete selected" msgstr "&删除所选" #: src/slic3r/GUI/MainFrame.cpp:1335 msgid "Deletes the current selection" msgstr "删除当前选择" #: src/slic3r/GUI/MainFrame.cpp:1337 msgid "Delete &all" msgstr "删除&所有" #: src/slic3r/GUI/MainFrame.cpp:1338 msgid "Deletes all objects" msgstr "删除所有对象" #: src/slic3r/GUI/MainFrame.cpp:1342 msgid "&Undo" msgstr "&撤销" #: src/slic3r/GUI/MainFrame.cpp:1345 msgid "&Redo" msgstr "&重做" #: src/slic3r/GUI/MainFrame.cpp:1350 msgid "&Copy" msgstr "&复制" #: src/slic3r/GUI/MainFrame.cpp:1351 msgid "Copy selection to clipboard" msgstr "将选择复制到剪贴板" #: src/slic3r/GUI/MainFrame.cpp:1353 msgid "&Paste" msgstr "&粘贴" #: src/slic3r/GUI/MainFrame.cpp:1354 msgid "Paste clipboard" msgstr "粘贴剪贴板" #: src/slic3r/GUI/MainFrame.cpp:1389 msgid "P&rint Settings Tab" msgstr "&打印设置选项卡" #: src/slic3r/GUI/MainFrame.cpp:1389 msgid "Show the print settings" msgstr "显示打印设置" #: src/slic3r/GUI/MainFrame.cpp:1392 src/slic3r/GUI/MainFrame.cpp:1564 msgid "&Filament Settings Tab" msgstr "&打印丝设置选项卡" #: src/slic3r/GUI/MainFrame.cpp:1392 msgid "Show the filament settings" msgstr "显示耗材设置" #: src/slic3r/GUI/MainFrame.cpp:1396 msgid "Print&er Settings Tab" msgstr "&打印机设置选项卡" #: src/slic3r/GUI/MainFrame.cpp:1396 msgid "Show the printer settings" msgstr "显示打印机设置" #: src/slic3r/GUI/MainFrame.cpp:1402 msgid "Print &Host Upload Queue" msgstr "打印&主机上传队列" #: src/slic3r/GUI/MainFrame.cpp:1402 msgid "Display the Print Host Upload Queue window" msgstr "显示打印主机上传队列窗口" #: src/slic3r/GUI/MainFrame.cpp:1470 src/slic3r/GUI/MainFrame.cpp:1535 msgid "&File" msgstr "&文件" #: src/slic3r/GUI/MainFrame.cpp:1471 msgid "&Edit" msgstr "&编辑" #: src/slic3r/GUI/MainFrame.cpp:1472 msgid "&Window" msgstr "&窗口" #: src/slic3r/GUI/MainFrame.cpp:1473 src/slic3r/GUI/MainFrame.cpp:1536 msgid "&View" msgstr "&视图" #: src/slic3r/GUI/MainFrame.cpp:1478 src/slic3r/GUI/MainFrame.cpp:1539 msgid "&Help" msgstr "&帮助" #: src/slic3r/GUI/MainFrame.cpp:1561 msgid "E&xport" msgstr "导&出" #: src/slic3r/GUI/MainFrame.cpp:1562 msgid "S&end to print" msgstr "发&送到打印机" #: src/slic3r/GUI/MainFrame.cpp:1564 msgid "Mate&rial Settings Tab" msgstr "配合设置选项卡" #: src/slic3r/GUI/MainFrame.cpp:1587 msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):" msgstr "选择要切片的文件(STL/OBJ/AMF/3MF/PRUSA):" #: src/slic3r/GUI/MainFrame.cpp:1598 msgid "No previously sliced file." msgstr "没有预切片的文件。" #: src/slic3r/GUI/MainFrame.cpp:1604 msgid "Previously sliced file (" msgstr "预切片文件 (" #: src/slic3r/GUI/MainFrame.cpp:1604 msgid ") not found." msgstr ") 无法找到。" #: src/slic3r/GUI/MainFrame.cpp:1605 msgid "File Not Found" msgstr "文件未找到" #: src/slic3r/GUI/MainFrame.cpp:1640 #, possible-c-format msgid "Save %s file as:" msgstr "将 %s 文件另存为:" #: src/slic3r/GUI/MainFrame.cpp:1640 msgid "SVG" msgstr "SVG" #: src/slic3r/GUI/MainFrame.cpp:1640 msgid "G-code" msgstr "G-code" #: src/slic3r/GUI/MainFrame.cpp:1652 msgid "Save zip file as:" msgstr "将 zip 文件另存为：" #: src/slic3r/GUI/MainFrame.cpp:1661 src/slic3r/GUI/Plater.cpp:3113 #: src/slic3r/GUI/Plater.cpp:5782 src/slic3r/GUI/Tab.cpp:4352 msgid "Slicing" msgstr "切片" #. TRN "Processing input_file_basename" #: src/slic3r/GUI/MainFrame.cpp:1663 #, possible-c-format msgid "Processing %s" msgstr "处理 %s" #: src/slic3r/GUI/MainFrame.cpp:1688 msgid "Slicing Done!" msgstr "切片完成!" #: src/slic3r/GUI/MainFrame.cpp:1703 msgid "Select the STL file to repair:" msgstr "选择要修复的 STL 文件:" #: src/slic3r/GUI/MainFrame.cpp:1713 msgid "Save OBJ file (less prone to coordinate errors than STL) as:" msgstr "将 OBJ 文件 (不像 STL 那样容易发生坐标错误) 保存为:" #: src/slic3r/GUI/MainFrame.cpp:1725 msgid "Your file was repaired." msgstr "您的文件已修复。" #: src/slic3r/GUI/MainFrame.cpp:1725 src/libslic3r/PrintConfig.cpp:6358 msgid "Repair" msgstr "修复" #: src/slic3r/GUI/MainFrame.cpp:1739 msgid "Save configuration as:" msgstr "将配置另存为：" #: src/slic3r/GUI/MainFrame.cpp:1758 src/slic3r/GUI/MainFrame.cpp:1820 msgid "Select configuration to load:" msgstr "选择要加载的配置：" #: src/slic3r/GUI/MainFrame.cpp:1794 msgid "Save presets bundle as:" msgstr "将预设配置组另存为：" #: src/slic3r/GUI/MainFrame.cpp:1841 #, possible-c-format msgid "%d presets successfully imported." msgstr "%d 预设已成功导入。" #: src/slic3r/GUI/Mouse3DController.cpp:477 msgid "Speed:" msgstr "速度:" #: src/slic3r/GUI/MsgDialog.cpp:70 #, possible-c-format msgid "%s error" msgstr "%s 错误" #: src/slic3r/GUI/MsgDialog.cpp:71 #, possible-c-format msgid "%s has encountered an error" msgstr "%s 遇到错误" #: src/slic3r/GUI/NotificationManager.hpp:474 msgid "Configuration update is available." msgstr "配置更新可用." #: src/slic3r/GUI/ObjectDataViewModel.cpp:58 msgid "Instances" msgstr "实例" #: src/slic3r/GUI/ObjectDataViewModel.cpp:62 #: src/slic3r/GUI/ObjectDataViewModel.cpp:225 #, possible-c-format msgid "Instance %d" msgstr "实例 %d" #: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:4197 #: src/slic3r/GUI/Tab.cpp:4281 msgid "Layers" msgstr "图层" #: src/slic3r/GUI/ObjectDataViewModel.cpp:96 msgid "Range" msgstr "范围" #: src/slic3r/GUI/OpenGLManager.cpp:262 msgid "You may need to update your graphics card driver." msgstr "您可能需要更新图形卡驱动程序。" #: src/slic3r/GUI/OpenGLManager.cpp:267 msgid "Unsupported OpenGL version" msgstr "不支持的 OpenGL 版本" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205 msgid "Print Host upload" msgstr "打印主机上传" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:337 msgid "Test" msgstr "测试" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:342 msgid "Could not get a valid Printer Host reference" msgstr "无法获取有效的打印机主机引用" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:354 msgid "Success!" msgstr "成功！" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:391 msgid "" "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-" "signed certificate." msgstr "" "HTTPS CA 文件是可选的。只有在使用带有自签名证书的 HTTPS 时, 才需要使用它。" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:401 msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*" msgstr "证书文件 (*.crt, *.pem)|*.crt;*.pem|All files|*.*" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:402 msgid "Open CA certificate file" msgstr "打开 CA 证书文件" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:430 #: src/libslic3r/PrintConfig.cpp:166 src/libslic3r/PrintConfig.cpp:2700 msgid "HTTPS CA File" msgstr "HTTPS CA 文件" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:431 #, possible-c-format msgid "" "On this system, %s uses HTTPS certificates from the system Certificate Store " "or Keychain." msgstr "" "在此系统上,%s 使用来自系统证书存储或钥匙串的 HTTPS 证书。" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:432 msgid "" "To use a custom CA file, please import your CA file into Certificate Store / " "Keychain." msgstr "" "要使用自定义 CA 文件,请将 CA 文件导入证书存储/钥匙串。" #: src/slic3r/GUI/PhysicalPrinterDialog.cpp:584 msgid "The supplied name is empty. It can't be saved." msgstr "提供的名称为空。无法保存。" #: src/slic3r/GUI/Plater.cpp:163 msgid "Volume" msgstr "体积" #: src/slic3r/GUI/Plater.cpp:164 msgid "Facets" msgstr "平面" #: src/slic3r/GUI/Plater.cpp:165 msgid "Materials" msgstr "材料" #: src/slic3r/GUI/Plater.cpp:168 msgid "Manifold" msgstr "流形" #: src/slic3r/GUI/Plater.cpp:218 msgid "Sliced Info" msgstr "切片信息" #: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1151 msgid "Used Filament (m)" msgstr "消耗耗材丝 (m)" #: src/slic3r/GUI/Plater.cpp:238 src/slic3r/GUI/Plater.cpp:1173 msgid "Used Filament (mm³)" msgstr "消耗耗材丝 (mm³)" #: src/slic3r/GUI/Plater.cpp:239 src/slic3r/GUI/Plater.cpp:1178 #: src/slic3r/GUI/Plater.cpp:1192 msgid "Used Filament (g)" msgstr "消耗耗材丝 (g)" #: src/slic3r/GUI/Plater.cpp:240 msgid "Used Material (unit)" msgstr "消耗材料（单位）" #: src/slic3r/GUI/Plater.cpp:243 msgid "Number of tool changes" msgstr "工具更换次数" #: src/slic3r/GUI/Plater.cpp:357 src/slic3r/GUI/Tab.cpp:4285 #: src/slic3r/GUI/Tab.cpp:4286 msgid "Supports" msgstr "支持" #: src/slic3r/GUI/Plater.cpp:360 msgid "Select what kind of support do you need" msgstr "选择您需要何种支撑" #: src/slic3r/GUI/Plater.cpp:362 src/libslic3r/PrintConfig.cpp:3605 #: src/libslic3r/PrintConfig.cpp:4866 msgid "Support on build plate only" msgstr "仅从打印面板支撑" #: src/slic3r/GUI/Plater.cpp:363 src/slic3r/GUI/Plater.cpp:489 msgid "For support enforcers only" msgstr "仅从支撑生成器支撑" #: src/slic3r/GUI/Plater.cpp:364 msgid "Everywhere" msgstr "任何地方" #: src/slic3r/GUI/Plater.cpp:396 msgid "Brim" msgstr "侧裙" #: src/slic3r/GUI/Plater.cpp:398 msgid "" "This flag enables the brim that will be printed around each object on the " "first layer." msgstr "此标志启用将在第一层上的每个对象周围打印裙边." #: src/slic3r/GUI/Plater.cpp:406 msgid "Purging volumes" msgstr "清理量" #: src/slic3r/GUI/Plater.cpp:500 src/slic3r/GUI/Tab.cpp:4326 #: src/slic3r/GUI/Tab.cpp:4327 src/slic3r/GUI/Tab.cpp:4398 msgid "Pad" msgstr "垫" #: src/slic3r/GUI/Plater.cpp:503 msgid "Select what kind of pad do you need" msgstr "选择您需要哪种垫子" #: src/slic3r/GUI/Plater.cpp:505 msgid "Below object" msgstr "对象底部" #: src/slic3r/GUI/Plater.cpp:506 msgid "Around object" msgstr "对象周围" #: src/slic3r/GUI/Plater.cpp:696 msgid "SLA print settings" msgstr "SLA 打印设置" #: src/slic3r/GUI/Plater.cpp:757 src/slic3r/GUI/Plater.cpp:6256 msgid "Send to printer" msgstr "发送到打印机" #: src/slic3r/GUI/Plater.cpp:772 src/slic3r/GUI/Plater.cpp:3113 #: src/slic3r/GUI/Plater.cpp:5785 msgid "Slice now" msgstr "立即切片" #: src/slic3r/GUI/Plater.cpp:926 msgid "Hold Shift to Slice & Export G-code" msgstr "按住 Shift 来切片并导出 G 代码" #: src/slic3r/GUI/Plater.cpp:1071 #, possible-c-format msgid "%d (%d shells)" msgstr "%d (%d 壳)" #: src/slic3r/GUI/Plater.cpp:1076 #, possible-c-format msgid "Auto-repaired (%d errors)" msgstr "自动修复 (%d 错误):" #: src/slic3r/GUI/Plater.cpp:1079 #, possible-c-format msgid "" "%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d " "facets reversed, %d backwards edges" msgstr "" "%d 退化面、%d 边缘固定、已移除 %d 分面、添加 %d 分面、%d 分面反转、%d 向后边" #: src/slic3r/GUI/Plater.cpp:1089 msgid "Yes" msgstr "是" #: src/slic3r/GUI/Plater.cpp:1110 msgid "Used Material (ml)" msgstr "消耗材料（毫升）" #: src/slic3r/GUI/Plater.cpp:1113 msgid "object(s)" msgstr "对象" #: src/slic3r/GUI/Plater.cpp:1113 msgid "supports and pad" msgstr "支撑和垫" #: src/slic3r/GUI/Plater.cpp:1153 src/slic3r/GUI/Plater.cpp:1234 msgid "objects" msgstr "对象" #: src/slic3r/GUI/Plater.cpp:1153 src/slic3r/GUI/Plater.cpp:1234 msgid "wipe tower" msgstr "擦料塔" #: src/slic3r/GUI/Plater.cpp:1232 src/libslic3r/PrintConfig.cpp:1521 #: src/libslic3r/PrintConfig.cpp:4681 src/libslic3r/PrintConfig.cpp:4682 msgid "Cost" msgstr "费用" #: src/slic3r/GUI/Plater.cpp:1250 msgid "normal mode" msgstr "正常模式" #: src/slic3r/GUI/Plater.cpp:1260 msgid "stealth mode" msgstr "隐身模式" #: src/slic3r/GUI/Plater.cpp:1552 src/slic3r/GUI/Plater.cpp:4972 #: src/slic3r/GUI/Plater.cpp:5211 msgid "Import Object" msgstr "导入对象" #: src/slic3r/GUI/Plater.cpp:1574 src/slic3r/GUI/Plater.cpp:5233 msgid "Load File" msgstr "加载文件" #: src/slic3r/GUI/Plater.cpp:1579 src/slic3r/GUI/Plater.cpp:5238 msgid "Load Files" msgstr "加载文件" #: src/slic3r/GUI/Plater.cpp:1689 msgid "Optimize Rotation" msgstr "优化旋转" #: src/slic3r/GUI/Plater.cpp:2236 msgid "New Project" msgstr "新项目" #: src/slic3r/GUI/Plater.cpp:2407 msgid "Loading" msgstr "载入中" #: src/slic3r/GUI/Plater.cpp:2517 src/slic3r/GUI/Plater.cpp:2570 msgid "Multi-part object detected" msgstr "检测到多部分对象" #: src/slic3r/GUI/Plater.cpp:2525 msgid "Detected advanced data" msgstr "检测到高级数据" #: src/slic3r/GUI/Plater.cpp:2547 #, possible-c-format msgid "" "You can't to add the object(s) from %s because of one or some of them is" "(are) multi-part" msgstr "不能从 %s 中添加对象, 因为其中一个或一些有多个部分" #: src/slic3r/GUI/Plater.cpp:2584 msgid "Loaded" msgstr "加载" #: src/slic3r/GUI/Plater.cpp:2686 msgid "" "Your object appears to be too large, so it was automatically scaled down to " "fit your print bed." msgstr "对象看起来太大，因此会自动缩小，以适应构建板。" #: src/slic3r/GUI/Plater.cpp:2687 msgid "Object too large?" msgstr "对象太大？" #: src/slic3r/GUI/Plater.cpp:2749 msgid "Export STL file:" msgstr "导出 STL 文件：" #: src/slic3r/GUI/Plater.cpp:2756 msgid "Export AMF file:" msgstr "导出 AMF 文件：" #: src/slic3r/GUI/Plater.cpp:2762 msgid "Save file as:" msgstr "将文件另存为：" #: src/slic3r/GUI/Plater.cpp:2768 msgid "Export OBJ file:" msgstr "导出 OBJ 文件：" #: src/slic3r/GUI/Plater.cpp:2876 msgid "Delete Object" msgstr "删除对象" #: src/slic3r/GUI/Plater.cpp:2887 msgid "Reset Project" msgstr "重置项目" #: src/slic3r/GUI/Plater.cpp:2960 msgid "" "The selected object can't be split because it contains more than one volume/" "material." msgstr "无法拆分所选对象, 因为它包含多个容量/材质。" #: src/slic3r/GUI/Plater.cpp:2971 msgid "Split to Objects" msgstr "拆分为对象" #: src/slic3r/GUI/Plater.cpp:3097 src/slic3r/GUI/Plater.cpp:3844 msgid "Invalid data" msgstr "无效数据" #: src/slic3r/GUI/Plater.cpp:3107 msgid "Ready to slice" msgstr "准备切片" #: src/slic3r/GUI/Plater.cpp:3155 src/slic3r/GUI/PrintHostDialogs.cpp:277 msgid "Cancelling" msgstr "取消中" #: src/slic3r/GUI/Plater.cpp:3174 msgid "Another export job is currently running." msgstr "当前正在运行另一个导出作业。" #: src/slic3r/GUI/Plater.cpp:3852 src/slic3r/GUI/PrintHostDialogs.cpp:278 msgid "Cancelled" msgstr "已取消" #: src/slic3r/GUI/Plater.cpp:4121 src/slic3r/GUI/Plater.cpp:4145 msgid "Remove the selected object" msgstr "删除所选对象" #: src/slic3r/GUI/Plater.cpp:4130 msgid "Add one more instance of the selected object" msgstr "再添加一个选定对象的实例" #: src/slic3r/GUI/Plater.cpp:4132 msgid "Remove one instance of the selected object" msgstr "删除所选对象的一个实例" #: src/slic3r/GUI/Plater.cpp:4134 msgid "Set number of instances" msgstr "设置实例数" #: src/slic3r/GUI/Plater.cpp:4134 msgid "Change the number of instances of the selected object" msgstr "更改所选对象的实例数" #: src/slic3r/GUI/Plater.cpp:4158 msgid "Export the selected object as STL file" msgstr "将所选对象导出为 STL 文件" #: src/slic3r/GUI/Plater.cpp:4188 msgid "Along X axis" msgstr "沿 X 轴" #: src/slic3r/GUI/Plater.cpp:4188 msgid "Mirror the selected object along the X axis" msgstr "沿 X 轴镜像所选对象" #: src/slic3r/GUI/Plater.cpp:4190 msgid "Along Y axis" msgstr "沿 Y 轴" #: src/slic3r/GUI/Plater.cpp:4190 msgid "Mirror the selected object along the Y axis" msgstr "沿 Y 轴镜像所选对象" #: src/slic3r/GUI/Plater.cpp:4192 msgid "Along Z axis" msgstr "沿 Z 轴" #: src/slic3r/GUI/Plater.cpp:4192 msgid "Mirror the selected object along the Z axis" msgstr "沿 Z 轴镜像所选对象" #: src/slic3r/GUI/Plater.cpp:4195 msgid "Mirror" msgstr "镜像" #: src/slic3r/GUI/Plater.cpp:4195 msgid "Mirror the selected object" msgstr "镜像所选对象" #: src/slic3r/GUI/Plater.cpp:4207 msgid "To objects" msgstr "拆分到对象" #: src/slic3r/GUI/Plater.cpp:4207 src/slic3r/GUI/Plater.cpp:4227 msgid "Split the selected object into individual objects" msgstr "将所选对象拆分为单个对象" #: src/slic3r/GUI/Plater.cpp:4209 msgid "To parts" msgstr "到零件" #: src/slic3r/GUI/Plater.cpp:4209 src/slic3r/GUI/Plater.cpp:4245 msgid "Split the selected object into individual sub-parts" msgstr "将所选对象拆分为各个子部分" #: src/slic3r/GUI/Plater.cpp:4212 src/slic3r/GUI/Plater.cpp:4227 #: src/slic3r/GUI/Plater.cpp:4245 src/libslic3r/PrintConfig.cpp:6382 msgid "Split" msgstr "分裂" #: src/slic3r/GUI/Plater.cpp:4212 msgid "Split the selected object" msgstr "拆分所选对象" #: src/slic3r/GUI/Plater.cpp:4234 msgid "Optimize orientation" msgstr "优化方向" #: src/slic3r/GUI/Plater.cpp:4235 msgid "Optimize the rotation of the object for better print results." msgstr "优化对象的旋转，以取得更好的打印效果。" #: src/slic3r/GUI/Plater.cpp:4315 msgid "3D editor view" msgstr "3D 编辑器视图" #: src/slic3r/GUI/Plater.cpp:4686 #, possible-c-format msgid "" "%1% printer was active at the time the target Undo / Redo snapshot was " "taken. Switching to %1% printer requires reloading of %1% presets." msgstr "" "%1% 打印机在拍摄目标撤消/重做快照时处于活动状态。切换到 %1% 打印机需要重新加" "载 %1% 预设。" #: src/slic3r/GUI/Plater.cpp:4943 msgid "Load Project" msgstr "加载项目" #: src/slic3r/GUI/Plater.cpp:4976 msgid "Import Objects" msgstr "导入对象" #: src/slic3r/GUI/Plater.cpp:5304 msgid "Delete Selected Objects" msgstr "删除选定对象" #: src/slic3r/GUI/Plater.cpp:5312 msgid "Increase Instances" msgstr "增加实例" #: src/slic3r/GUI/Plater.cpp:5346 msgid "Decrease Instances" msgstr "减少实例" #: src/slic3r/GUI/Plater.cpp:5382 #, possible-c-format msgid "Set numbers of copies to %d" msgstr "将副本数设置为 %d" #: src/slic3r/GUI/Plater.cpp:5448 msgid "Cut by Plane" msgstr "按平面切割" #: src/slic3r/GUI/Plater.cpp:5505 msgid "Save G-code file as:" msgstr "将 G-code 文件另存为:" #: src/slic3r/GUI/Plater.cpp:5505 msgid "Save SL1 file as:" msgstr "将 SL1 文件另存为：" #: src/slic3r/GUI/Plater.cpp:5652 #, possible-c-format msgid "STL file exported to %s" msgstr "STL 文件导出到 %s" #: src/slic3r/GUI/Plater.cpp:5669 #, possible-c-format msgid "AMF file exported to %s" msgstr "AMF 文件导出到 %s" #: src/slic3r/GUI/Plater.cpp:5672 #, possible-c-format msgid "Error exporting AMF file %s" msgstr "导出 AMF 文件 %s 时出错" #: src/slic3r/GUI/Plater.cpp:5712 #, possible-c-format msgid "3MF file exported to %s" msgstr "3MF 文件导出到 %s" #: src/slic3r/GUI/Plater.cpp:5718 #, possible-c-format msgid "Error exporting 3MF file %s" msgstr "导出3MF 文件 %s 时出错" #: src/slic3r/GUI/Plater.cpp:6255 msgid "Export" msgstr "导出" #: src/slic3r/GUI/Plater.cpp:6350 msgid "Paste From Clipboard" msgstr "从剪贴板粘贴" #: src/slic3r/GUI/Preferences.cpp:57 msgid "General" msgstr "常规" #: src/slic3r/GUI/Preferences.cpp:72 msgid "Remember output directory" msgstr "记住输出目录" #: src/slic3r/GUI/Preferences.cpp:74 msgid "" "If this is enabled, Slic3r will prompt the last output directory instead of " "the one containing the input files." msgstr "" "如果启用此功能，Slic3r 将提示最后一个输出目录，而不是包含输入文件的输出目录。" #: src/slic3r/GUI/Preferences.cpp:80 msgid "Auto-center parts" msgstr "自动居中部件" #: src/slic3r/GUI/Preferences.cpp:82 msgid "" "If this is enabled, Slic3r will auto-center objects around the print bed " "center." msgstr "如果启用此功能，Slic3r 将自动将对象集中在构建板中心周围。" #: src/slic3r/GUI/Preferences.cpp:88 msgid "Background processing" msgstr "后台处理" #: src/slic3r/GUI/Preferences.cpp:90 msgid "" "If this is enabled, Slic3r will pre-process objects as soon as they're " "loaded in order to save time when exporting G-code." msgstr "" "如果启用此功能, Slic3r 将在加载对象后立即对其进行预处理, 以便在导出 G-code " "时节省时间。" #: src/slic3r/GUI/Preferences.cpp:134 msgid "" "If enabled, Slic3r downloads updates of built-in system presets in the " "background. These updates are downloaded into a separate temporary location. " "When a new preset version becomes available it is offered at application " "startup." msgstr "" "如果启用，Slic3r 将在后台下载内置系统预设的更新。 这些更新将会下载到一个单独" "的临时文件夹。当一切准备就绪，将在应用启动的时候提供新版本。" #: src/slic3r/GUI/Preferences.cpp:139 msgid "Suppress \" - default - \" presets" msgstr "禁止\"- 默认值 - \"预设" #: src/slic3r/GUI/Preferences.cpp:141 msgid "" "Suppress \" - default - \" presets in the Print / Filament / Printer " "selections once there are any other valid presets available." msgstr "" "在 \"打印/耗材丝/打印机\" 选择中禁止 \"-默认-\" 预设, 一旦有任何其他有效的预" "设可用。" #: src/slic3r/GUI/Preferences.cpp:147 msgid "Show incompatible print and filament presets" msgstr "显示不兼容的打印和耗材丝预设" #: src/slic3r/GUI/Preferences.cpp:149 msgid "" "When checked, the print and filament presets are shown in the preset editor " "even if they are marked as incompatible with the active printer" msgstr "" "选中后, 打印和耗材丝预设将显示在预设编辑器中, 即使它们被标记为与活动打印机不" "兼容" #: src/slic3r/GUI/Preferences.cpp:225 msgid "Use Retina resolution for the 3D scene" msgstr "对 3D 场景使用视网膜分辨率" #: src/slic3r/GUI/Preferences.cpp:227 msgid "" "If enabled, the 3D scene will be rendered in Retina resolution. If you are " "experiencing 3D performance problems, disabling this option may help." msgstr "" "如果启用，3D 场景将以视网膜分辨率渲染。如果您遇到 3D 性能问题，禁用此选项可能" "会有所帮助。" #: src/slic3r/GUI/Preferences.cpp:307 msgid "Use perspective camera" msgstr "使用透视摄像机" #: src/slic3r/GUI/Preferences.cpp:309 msgid "" "If enabled, use perspective camera. If not enabled, use orthographic camera." msgstr "如果启用,请使用透视摄像机。如果未启用,请使用正交相机。" #: src/slic3r/GUI/Preferences.cpp:374 msgid "Use custom size for toolbar icons" msgstr "对工具栏图标使用自定义大小" #: src/slic3r/GUI/Preferences.cpp:376 msgid "If enabled, you can change size of toolbar icons manually." msgstr "如果启用,您可以手动更改工具栏图标的大小。" #: src/slic3r/GUI/Preferences.cpp:505 #, possible-c-format msgid "You need to restart %s to make the changes effective." msgstr "您需要重新启动 %s 以使更改生效。" #: src/slic3r/GUI/Preferences.cpp:581 msgid "Icon size in a respect to the default size" msgstr "相对于默认大小的图标大小" #: src/slic3r/GUI/Preferences.cpp:596 msgid "Select toolbar icon size in respect to the default one." msgstr "选择与默认工具栏图标大小有关的大小。" #: src/slic3r/GUI/PresetComboBoxes.cpp:224 #: src/slic3r/GUI/PresetComboBoxes.cpp:262 #: src/slic3r/GUI/PresetComboBoxes.cpp:788 #: src/slic3r/GUI/PresetComboBoxes.cpp:838 #: src/slic3r/GUI/PresetComboBoxes.cpp:959 #: src/slic3r/GUI/PresetComboBoxes.cpp:1003 msgid "System presets" msgstr "系统预设" #: src/slic3r/GUI/PresetComboBoxes.cpp:266 #: src/slic3r/GUI/PresetComboBoxes.cpp:842 #: src/slic3r/GUI/PresetComboBoxes.cpp:1007 msgid "User presets" msgstr "用户预设" #: src/slic3r/GUI/PresetComboBoxes.cpp:651 msgid "Click to edit preset" msgstr "单击以编辑预设" #: src/slic3r/GUI/PresetHints.cpp:237 msgid "external perimeters" msgstr "外围轮廓" #: src/slic3r/GUI/PresetHints.cpp:246 msgid "perimeters" msgstr "轮廓" #: src/slic3r/GUI/PresetHints.cpp:255 msgid "infill" msgstr "加密" #: src/slic3r/GUI/PresetHints.cpp:265 msgid "solid infill" msgstr "实心填充" #: src/slic3r/GUI/PresetHints.cpp:273 msgid "top solid infill" msgstr "顶部实心填充" #: src/slic3r/GUI/PresetHints.cpp:284 msgid "support" msgstr "支撑" #: src/slic3r/GUI/PresetHints.cpp:294 msgid "support interface" msgstr "支撑面" #: src/slic3r/GUI/PresetHints.cpp:300 msgid "First layer volumetric" msgstr "首层流量" #: src/slic3r/GUI/PresetHints.cpp:300 msgid "Bridging volumetric" msgstr "桥接流量" #: src/slic3r/GUI/PresetHints.cpp:300 msgid "Volumetric" msgstr "体积" #: src/slic3r/GUI/PresetHints.cpp:301 msgid "flow rate is maximized" msgstr "流速已经最大" #: src/slic3r/GUI/PresetHints.cpp:304 msgid "by the print profile maximum" msgstr "根据打印配置文件的最大值" #: src/slic3r/GUI/PresetHints.cpp:305 msgid "when printing" msgstr "打印时" #: src/slic3r/GUI/PresetHints.cpp:306 msgid "with a volumetric rate" msgstr "具有体积速率" #: src/slic3r/GUI/PresetHints.cpp:310 #, possible-c-format msgid "%3.2f mm³/s at filament speed %3.2f mm/s." msgstr "%3.2f mm³/s，耗材丝速度 %3.2f mm/s。" #: src/slic3r/GUI/PrintHostDialogs.cpp:35 msgid "Send G-Code to printer host" msgstr "向打印机主机发送 G-Code" #: src/slic3r/GUI/PrintHostDialogs.cpp:35 msgid "Upload to Printer Host with the following filename:" msgstr "使用以下文件名上传到打印机主机：" #: src/slic3r/GUI/PrintHostDialogs.cpp:37 msgid "Start printing after upload" msgstr "上传后开始打印" #: src/slic3r/GUI/PrintHostDialogs.cpp:45 msgid "Use forward slashes ( / ) as a directory separator if needed." msgstr "如果需要，请使用正向斜杠 （ / ） 作为目录分隔符。" #: src/slic3r/GUI/PrintHostDialogs.cpp:189 msgid "ID" msgstr "ID" #: src/slic3r/GUI/PrintHostDialogs.cpp:190 msgid "Progress" msgstr "进度" #: src/slic3r/GUI/PrintHostDialogs.cpp:191 msgid "Status" msgstr "状态" #: src/slic3r/GUI/PrintHostDialogs.cpp:192 msgid "Host" msgstr "主机" #: src/slic3r/GUI/PrintHostDialogs.cpp:193 msgid "Filename" msgstr "文件名" #: src/slic3r/GUI/PrintHostDialogs.cpp:194 msgid "Error Message" msgstr "错误信息" #: src/slic3r/GUI/PrintHostDialogs.cpp:197 msgid "Cancel selected" msgstr "取消选定" #: src/slic3r/GUI/PrintHostDialogs.cpp:199 msgid "Show error message" msgstr "显示错误消息" #: src/slic3r/GUI/PrintHostDialogs.cpp:241 #: src/slic3r/GUI/PrintHostDialogs.cpp:274 msgid "Enqueued" msgstr "加入队列" #: src/slic3r/GUI/PrintHostDialogs.cpp:275 msgid "Uploading" msgstr "上传中" #: src/slic3r/GUI/PrintHostDialogs.cpp:279 msgid "Completed" msgstr "已完成" #: src/slic3r/GUI/PrintHostDialogs.cpp:317 msgid "Error uploading to print host:" msgstr "上传到打印主机时出错：" #: src/slic3r/GUI/RammingChart.cpp:23 msgid "NO RAMMING AT ALL" msgstr "完全不存在" #: src/slic3r/GUI/RammingChart.cpp:81 msgid "Volumetric speed" msgstr "流量速度" #: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:1237 #: src/libslic3r/PrintConfig.cpp:2550 msgid "mm³/s" msgstr "mm³/s" #: src/slic3r/GUI/SavePresetDialog.cpp:57 #, possible-c-format msgid "Save %s as:" msgstr "将 %s 另存为:" #: src/slic3r/GUI/SavePresetDialog.cpp:110 msgid "the following suffix is not allowed:" msgstr "不允许使用以下后缀:" #: src/slic3r/GUI/SavePresetDialog.cpp:116 msgid "The supplied name is not available." msgstr "提供的名称不可用。" #: src/slic3r/GUI/SavePresetDialog.cpp:122 msgid "Cannot overwrite a system profile." msgstr "无法覆盖系统配置文件。" #: src/slic3r/GUI/SavePresetDialog.cpp:127 msgid "Cannot overwrite an external profile." msgstr "无法覆盖外部配置文件。" #: src/slic3r/GUI/SavePresetDialog.cpp:186 #: src/slic3r/GUI/SavePresetDialog.cpp:192 msgid "Save preset" msgstr "保存预设" #: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2551 msgid "Stealth" msgstr "隐形" #: src/slic3r/GUI/Search.cpp:77 src/slic3r/GUI/Tab.cpp:2545 msgid "Normal" msgstr "正常" #: src/slic3r/GUI/Selection.cpp:172 msgid "Selection-Add" msgstr "选择-添加" #: src/slic3r/GUI/Selection.cpp:213 msgid "Selection-Remove" msgstr "选择-删除" #: src/slic3r/GUI/Selection.cpp:245 msgid "Selection-Add Object" msgstr "选择-添加对象" #: src/slic3r/GUI/Selection.cpp:264 msgid "Selection-Remove Object" msgstr "选择-删除对象" #: src/slic3r/GUI/Selection.cpp:282 msgid "Selection-Add Instance" msgstr "选择-添加实例" #: src/slic3r/GUI/Selection.cpp:301 msgid "Selection-Remove Instance" msgstr "选择-删除实例" #: src/slic3r/GUI/Selection.cpp:402 msgid "Selection-Add All" msgstr "全部选择添加" #: src/slic3r/GUI/Selection.cpp:428 msgid "Selection-Remove All" msgstr "选择 - 全部删除" #: src/slic3r/GUI/Selection.cpp:960 msgid "Scale To Fit" msgstr "缩放至合适" #: src/slic3r/GUI/Selection.cpp:1487 msgid "Set Printable Instance" msgstr "设置可打印实例" #: src/slic3r/GUI/Selection.cpp:1487 msgid "Set Unprintable Instance" msgstr "设置不可打印的实例" #: src/slic3r/GUI/SysInfoDialog.cpp:82 msgid "System Information" msgstr "系统信息" #: src/slic3r/GUI/SysInfoDialog.cpp:158 msgid "Copy to Clipboard" msgstr "复制到剪贴板" #: src/slic3r/GUI/Tab.cpp:117 src/libslic3r/PrintConfig.cpp:517 msgid "Compatible printers" msgstr "兼容打印机" #: src/slic3r/GUI/Tab.cpp:118 msgid "Select the printers this profile is compatible with." msgstr "选择与此配置文件兼容的打印机。" #: src/slic3r/GUI/Tab.cpp:123 src/libslic3r/PrintConfig.cpp:532 msgid "Compatible print profiles" msgstr "兼容的打印配置文件" #: src/slic3r/GUI/Tab.cpp:124 msgid "Select the print profiles this profile is compatible with." msgstr "选择与此配置文件兼容的打印配置文件。" #. TRN "Save current Settings" #: src/slic3r/GUI/Tab.cpp:219 #, possible-c-format msgid "Save current %s" msgstr "保存当前 %s" #: src/slic3r/GUI/Tab.cpp:220 msgid "Delete this preset" msgstr "删除该预设" #: src/slic3r/GUI/Tab.cpp:224 msgid "" "Hover the cursor over buttons to find more information \n" "or click this button." msgstr "" "将光标悬停在按钮上以查找详细信息\n" "或单击此按钮。" #: src/slic3r/GUI/Tab.cpp:1354 msgid "This is a default preset." msgstr "这是默认预设。" #: src/slic3r/GUI/Tab.cpp:1356 msgid "This is a system preset." msgstr "这是一个系统预设。" #: src/slic3r/GUI/Tab.cpp:1358 msgid "Current preset is inherited from the default preset." msgstr "当前预设从默认预设继承。" #: src/slic3r/GUI/Tab.cpp:1362 msgid "Current preset is inherited from" msgstr "" "当前预设继承自" #: src/slic3r/GUI/Tab.cpp:1366 msgid "It can't be deleted or modified." msgstr "无法删除或修改它。" #: src/slic3r/GUI/Tab.cpp:1367 msgid "" "Any modifications should be saved as a new preset inherited from this one." msgstr "任何修改都应保存为从此修改继承的新预设。" #: src/slic3r/GUI/Tab.cpp:1368 msgid "To do that please specify a new name for the preset." msgstr "为此，请为预设指定新名称。" #: src/slic3r/GUI/Tab.cpp:1372 msgid "Additional information:" msgstr "附加信息：" #: src/slic3r/GUI/Tab.cpp:1378 msgid "printer model" msgstr "打印机型号" #: src/slic3r/GUI/Tab.cpp:1386 msgid "default print profile" msgstr "默认打印配置文件" #: src/slic3r/GUI/Tab.cpp:1389 msgid "default filament profile" msgstr "默认耗材丝配置" #: src/slic3r/GUI/Tab.cpp:1403 msgid "default SLA material profile" msgstr "默认 SLA 材料配置文件" #: src/slic3r/GUI/Tab.cpp:1407 msgid "default SLA print profile" msgstr "默认 SLA 打印配置文件" #: src/slic3r/GUI/Tab.cpp:1608 msgid "" "Single Extruder Multi Material is selected, \n" "and all extruders must have the same diameter.\n" "Do you want to change the diameter for all extruders to first extruder " "nozzle diameter value?" msgstr "" "选择单挤出机多材料,\n" "和所有挤出机必须具有相同的直径。\n" "是否要将所有挤出机的直径更改为第一挤出机喷嘴直径值？" #: src/slic3r/GUI/Tab.cpp:1611 src/slic3r/GUI/Tab.cpp:2026 #: src/libslic3r/PrintConfig.cpp:2665 msgid "Nozzle diameter" msgstr "喷嘴直径" #: src/slic3r/GUI/Tab.cpp:1958 msgid "Ramming settings" msgstr "冲击设置" #: src/slic3r/GUI/Tab.cpp:1994 msgid "Extruders" msgstr "挤出机" #: src/slic3r/GUI/Tab.cpp:1995 msgid "Number of extruders of the printer." msgstr "打印机的挤出机数。" #: src/slic3r/GUI/Tab.cpp:2024 msgid "" "This is a single extruder multimaterial printer, diameters of all extruders " "will be set to the new value. Do you want to proceed?" msgstr "" "这是一台单挤出机多材料打印机，所有挤出机的直径都将设置为新的值。是否要继续？" #: src/slic3r/GUI/Tab.cpp:2049 msgid "Reset to Filament Color" msgstr "重置为耗材丝颜色" #: src/slic3r/GUI/Tab.cpp:2186 msgid "Filament Overrides" msgstr "耗材丝参数替换" #: src/slic3r/GUI/Tab.cpp:2306 msgid "Volumetric flow hints not available" msgstr "容积流量提示不可用" #: src/slic3r/GUI/Tab.cpp:2518 src/slic3r/GUI/Tab.cpp:2624 msgid "Machine limits" msgstr "机器限制" #: src/slic3r/GUI/Tab.cpp:2524 msgid "Machine Limits" msgstr "机器限制" #: src/slic3r/GUI/Tab.cpp:2544 msgid "Values in this column are for Normal mode" msgstr "此列中的值用于正常模式" #: src/slic3r/GUI/Tab.cpp:2550 msgid "Values in this column are for Stealth mode" msgstr "此列中的值用于隐身模式" #: src/slic3r/GUI/Tab.cpp:2560 msgid "Maximum feedrates" msgstr "最大进给率" #: src/slic3r/GUI/Tab.cpp:2568 msgid "Maximum accelerations" msgstr "最大加速度" #: src/slic3r/GUI/Tab.cpp:2576 msgid "Jerk limits" msgstr "抖动限制" #: src/slic3r/GUI/Tab.cpp:2581 msgid "Minimum feedrates" msgstr "最小进给率" #: src/slic3r/GUI/Tab.cpp:2652 src/slic3r/GUI/Tab.cpp:2661 msgid "Single extruder MM setup" msgstr "单挤出机 MM 设置" #: src/slic3r/GUI/Tab.cpp:2662 msgid "Single extruder multimaterial parameters" msgstr "单挤出机多材料参数" #: src/slic3r/GUI/Tab.cpp:2897 msgid "" "The Wipe option is not available when using the Firmware Retraction mode.\n" "\n" "Shall I disable it in order to enable Firmware Retraction?" msgstr "" "使用固件回抽模式时，\"擦除\"选项不可用。\n" "\n" "我应禁用它，以便启用固件回抽？" #: src/slic3r/GUI/Tab.cpp:2899 msgid "Firmware Retraction" msgstr "固件回抽" #: src/slic3r/GUI/Tab.cpp:3610 msgid "remove" msgstr "移除" #: src/slic3r/GUI/Tab.cpp:3610 msgid "delete" msgstr "删除" #: src/slic3r/GUI/Tab.cpp:3652 #, possible-c-format msgid "Are you sure you want to %1% the selected preset?" msgstr "是否确实要将所选预设 %1%？" #. TRN Remove/Delete #: src/slic3r/GUI/Tab.cpp:3657 #, possible-c-format msgid "%1% Preset" msgstr "%1% 预设" #: src/slic3r/GUI/Tab.cpp:3738 src/slic3r/GUI/Tab.cpp:3810 msgid "Set" msgstr "设置" #: src/slic3r/GUI/Tab.cpp:3965 msgid "LOCKED LOCK" msgstr "锁定锁" #. TRN Description for "LOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3967 msgid "" "indicates that the settings are the same as the system (or default) values " "for the current option group" msgstr "指示设置与当前选项组的系统(或默认值)值相同" #: src/slic3r/GUI/Tab.cpp:3969 msgid "UNLOCKED LOCK" msgstr "解锁锁" #. TRN Description for "UNLOCKED LOCK" #: src/slic3r/GUI/Tab.cpp:3971 msgid "" "indicates that some settings were changed and are not equal to the system " "(or default) values for the current option group.\n" "Click the UNLOCKED LOCK icon to reset all settings for current option group " "to the system (or default) values." msgstr "" "指示某些设置已更改,并且不等于当前选项组的系统(或默认值)值。\n" "单击\"锁定锁定\"图标可将当前选项组的所有设置重置为系统(或默认值)值。" #: src/slic3r/GUI/Tab.cpp:3976 msgid "WHITE BULLET" msgstr "白色子弹" #. TRN Description for "WHITE BULLET" #: src/slic3r/GUI/Tab.cpp:3978 msgid "" "for the left button: indicates a non-system (or non-default) preset,\n" "for the right button: indicates that the settings hasn't been modified." msgstr "" "对于左侧按钮:指示非系统(或非默认)预设,\n" "对于右侧按钮:指示设置尚未修改。" #: src/slic3r/GUI/Tab.cpp:3981 msgid "BACK ARROW" msgstr "后箭头" #. TRN Description for "BACK ARROW" #: src/slic3r/GUI/Tab.cpp:3983 msgid "" "indicates that the settings were changed and are not equal to the last saved " "preset for the current option group.\n" "Click the BACK ARROW icon to reset all settings for the current option group " "to the last saved preset." msgstr "" "指示设置已更改,不等于当前选项组的最后一个保存预设。\n" "单击\"后退箭头\"图标可将当前选项组的所有设置重置为上次保存的预设。" #: src/slic3r/GUI/Tab.cpp:3993 msgid "" "LOCKED LOCK icon indicates that the settings are the same as the system (or " "default) values for the current option group" msgstr "锁定锁定图标表示设置与当前选项组的系统(或默认值)值相同" #: src/slic3r/GUI/Tab.cpp:3995 msgid "" "UNLOCKED LOCK icon indicates that some settings were changed and are not " "equal to the system (or default) values for the current option group.\n" "Click to reset all settings for current option group to the system (or " "default) values." msgstr "" "锁定的锁 图标指示某些设置已更改,并且不等于当前选项组的系统(或默认值)值。\n" "单击此处可将当前选项组的所有设置重置为系统(或默认值)值。" #: src/slic3r/GUI/Tab.cpp:3998 msgid "WHITE BULLET icon indicates a non system (or non default) preset." msgstr "白色 BULLET 图标表示非系统(或非默认)预设。" #: src/slic3r/GUI/Tab.cpp:4001 msgid "" "WHITE BULLET icon indicates that the settings are the same as in the last " "saved preset for the current option group." msgstr "白色子弹图标表示设置与当前选项组上次保存的预设中的设置相同。" #: src/slic3r/GUI/Tab.cpp:4003 msgid "" "BACK ARROW icon indicates that the settings were changed and are not equal " "to the last saved preset for the current option group.\n" "Click to reset all settings for the current option group to the last saved " "preset." msgstr "" "后退箭头图标表示设置已更改，不等于当前选项组的最后保存预设。\n" "单击此处可将当前选项组的所有设置重置为上次保存的预设。" #: src/slic3r/GUI/Tab.cpp:4009 msgid "" "LOCKED LOCK icon indicates that the value is the same as the system (or " "default) value." msgstr "锁定锁定图标表示该值与系统(或默认值)值相同。" #: src/slic3r/GUI/Tab.cpp:4010 msgid "" "UNLOCKED LOCK icon indicates that the value was changed and is not equal to " "the system (or default) value.\n" "Click to reset current value to the system (or default) value." msgstr "" "锁定的锁 图标指示该值已更改,不等于系统(或默认值)值。\n" "单击以将当前值重置为系统(或默认值)值。" #: src/slic3r/GUI/Tab.cpp:4016 msgid "" "WHITE BULLET icon indicates that the value is the same as in the last saved " "preset." msgstr "白色子弹图标表示该值与上次保存的预设中的值相同。" #: src/slic3r/GUI/Tab.cpp:4017 msgid "" "BACK ARROW icon indicates that the value was changed and is not equal to the " "last saved preset.\n" "Click to reset current value to the last saved preset." msgstr "" "后退箭头图标指示该值已更改，不等于上次保存的预设。\n" "单击以将当前值重置为上次保存的预设。" #: src/slic3r/GUI/Tab.cpp:4163 src/slic3r/GUI/Tab.cpp:4165 msgid "Material" msgstr "材料" #: src/slic3r/GUI/Tab.cpp:4200 msgid "Exposure" msgstr "曝光" #: src/slic3r/GUI/Tab.cpp:4204 msgid "Corrections" msgstr "修正" #: src/slic3r/GUI/Tab.cpp:4220 src/slic3r/GUI/Tab.cpp:4221 msgid "Notes" msgstr "备注" #: src/slic3r/GUI/Tab.cpp:4228 src/slic3r/GUI/Tab.cpp:4361 msgid "Dependencies" msgstr "依赖" #: src/slic3r/GUI/Tab.cpp:4229 src/slic3r/GUI/Tab.cpp:4362 msgid "Profile dependencies" msgstr "配置文件依赖" #: src/slic3r/GUI/Tab.cpp:4279 msgid "Layers and perimeters" msgstr "层和轮廓" #: src/slic3r/GUI/Tab.cpp:4289 msgid "Support head" msgstr "支撑头" #: src/slic3r/GUI/Tab.cpp:4294 msgid "Support pillar" msgstr "支撑支柱" #: src/slic3r/GUI/Tab.cpp:4317 msgid "Connection of the support sticks and junctions" msgstr "支撑杆和接头的连接" #: src/slic3r/GUI/Tab.cpp:4322 msgid "Automatic generation" msgstr "自动生成" #: src/slic3r/GUI/Tab.cpp:4351 msgid "Advanced" msgstr "高级" #: src/slic3r/GUI/Tab.cpp:4355 msgid "Output options" msgstr "输出选项" #: src/slic3r/GUI/Tab.cpp:4356 msgid "Output file" msgstr "输出文件" #: src/slic3r/GUI/Tab.cpp:4398 src/libslic3r/PrintConfig.cpp:4945 msgid "Object elevation" msgstr "对象高程" #: src/slic3r/GUI/Tab.cpp:4398 src/libslic3r/PrintConfig.cpp:5049 msgid "Pad around object" msgstr "对象周围填充" #: src/slic3r/GUI/Tab.hpp:382 src/slic3r/GUI/Tab.hpp:515 msgid "Print Settings" msgstr "打印设置" #: src/slic3r/GUI/Tab.hpp:414 msgid "Filament Settings" msgstr "耗材丝设置" #: src/slic3r/GUI/Tab.hpp:464 msgid "Printer Settings" msgstr "打印机设置" #: src/slic3r/GUI/Tab.hpp:499 msgid "Material Settings" msgstr "材料设置" #: src/slic3r/GUI/UnsavedChangesDialog.cpp:1105 msgid "Capabilities" msgstr "权限" #: src/slic3r/GUI/UpdateDialogs.cpp:38 msgid "Update available" msgstr "更新可用" #: src/slic3r/GUI/UpdateDialogs.cpp:38 #, possible-c-format msgid "New version of %s is available" msgstr "新版本 %s 可用" #: src/slic3r/GUI/UpdateDialogs.cpp:43 msgid "Current version:" msgstr "当前版本:" #: src/slic3r/GUI/UpdateDialogs.cpp:45 msgid "New version:" msgstr "新版本：" #: src/slic3r/GUI/UpdateDialogs.cpp:53 msgid "Changelog && Download" msgstr "更改日志 && 下载" #: src/slic3r/GUI/UpdateDialogs.cpp:60 src/slic3r/GUI/UpdateDialogs.cpp:125 #: src/slic3r/GUI/UpdateDialogs.cpp:183 msgid "Open changelog page" msgstr "打开更改日志页面" #: src/slic3r/GUI/UpdateDialogs.cpp:65 msgid "Open download page" msgstr "打开下载页面" #: src/slic3r/GUI/UpdateDialogs.cpp:71 msgid "Don't notify about new releases any more" msgstr "不再通知新版本" #: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266 msgid "Configuration update" msgstr "配置更新" #: src/slic3r/GUI/UpdateDialogs.cpp:89 msgid "Configuration update is available" msgstr "配置更新可用" #: src/slic3r/GUI/UpdateDialogs.cpp:92 msgid "" "Would you like to install it?\n" "\n" "Note that a full configuration snapshot will be created first. It can then " "be restored at any time should there be a problem with the new version.\n" "\n" "Updated configuration bundles:" msgstr "" "是否安装它？\n" "\n" "请注意，将首先创建完整的配置快照。然后，如果新版本出现问题，可以随时恢复" "它。\n" "\n" "更新的配置捆绑包：" #: src/slic3r/GUI/UpdateDialogs.cpp:113 src/slic3r/GUI/UpdateDialogs.cpp:173 msgid "Comment:" msgstr "评论：" #: src/slic3r/GUI/UpdateDialogs.cpp:148 src/slic3r/GUI/UpdateDialogs.cpp:210 #, possible-c-format msgid "%s incompatibility" msgstr "%s 不兼容" #: src/slic3r/GUI/UpdateDialogs.cpp:191 src/slic3r/GUI/UpdateDialogs.cpp:246 #, possible-c-format msgid "Exit %s" msgstr "退出 %s" #: src/slic3r/GUI/UpdateDialogs.cpp:211 #, possible-c-format msgid "%s configuration is incompatible" msgstr "%s 配置不兼容" #: src/slic3r/GUI/UpdateDialogs.cpp:225 #, possible-c-format msgid "This %s version: %s" msgstr "此 %s 版本: %s" #: src/slic3r/GUI/UpdateDialogs.cpp:230 msgid "Incompatible bundles:" msgstr "不兼容的包:" #: src/slic3r/GUI/UpdateDialogs.cpp:249 msgid "Re-configure" msgstr "重新配置" #: src/slic3r/GUI/UpdateDialogs.cpp:270 #, possible-c-format msgid "" "%s now uses an updated configuration structure.\n" "\n" "So called 'System presets' have been introduced, which hold the built-in " "default settings for various printers. These System presets cannot be " "modified, instead, users now may create their own presets inheriting " "settings from one of the System presets.\n" "An inheriting preset may either inherit a particular value from its parent " "or override it with a customized value.\n" "\n" "Please proceed with the %s that follows to set up the new presets and to " "choose whether to enable automatic preset updates." msgstr "" "%s 现在使用更新的配置结构。\n" "\n" "所谓的\"系统预设\"已经引入,它保存各种打印机的内置默认设置。无法修改这些系统预" "设,相反,用户现在可以创建自己的预设,从其中一个系统预设继承设置。\n" "继承预设可以从其父级继承特定值,也可以使用自定义值覆盖该值。\n" "\n" "请继续以下 %s 以设置新预设并选择是否启用自动预设更新。" #: src/slic3r/GUI/WipeTowerDialog.cpp:15 msgid "Ramming customization" msgstr "冲击自定义" #: src/slic3r/GUI/WipeTowerDialog.cpp:41 msgid "" "Ramming denotes the rapid extrusion just before a tool change in a single-" "extruder MM printer. Its purpose is to properly shape the end of the " "unloaded filament so it does not prevent insertion of the new filament and " "can itself be reinserted later. This phase is important and different " "materials can require different extrusion speeds to get the good shape. For " "this reason, the extrusion rates during ramming are adjustable.\n" "\n" "This is an expert-level setting, incorrect adjustment will likely lead to " "jams, extruder wheel grinding into filament etc." msgstr "" "冲击表示在单挤出机 MM 打印机的挤出机更换之前的快速挤出。它的目的是正确地塑造" "卸载的耗材丝的末端, 这样它就不会导致插入新的耗材丝卡住, 并且原耗材丝本身可以" "再重新插入。这个阶段很重要, 不同的材料可能需要不同的挤压速度, 以获得良好的形" "状。因此, 夯实冲击过程中的挤出速率是可调的。\n" "\n" "这是一个专家级设置, 不正确的调整很可能会导致卡料, 挤出机砂轮磨耗材丝等。" #: src/slic3r/GUI/WipeTowerDialog.cpp:83 msgid "Total ramming time" msgstr "总冲击时间" #: src/slic3r/GUI/WipeTowerDialog.cpp:85 msgid "Total rammed volume" msgstr "总冲击量" #: src/slic3r/GUI/WipeTowerDialog.cpp:89 msgid "Ramming line width" msgstr "冲击线宽度" #: src/slic3r/GUI/WipeTowerDialog.cpp:91 msgid "Ramming line spacing" msgstr "冲击线行距" #: src/slic3r/GUI/WipeTowerDialog.cpp:142 msgid "Wipe tower - Purging volume adjustment" msgstr "擦料塔 - 清除体积调整" #: src/slic3r/GUI/WipeTowerDialog.cpp:254 msgid "" "Here you can adjust required purging volume (mm³) for any given pair of " "tools." msgstr "在这里, 您可以调整任何给定的对工具所需的清除体积 (mm³) 。" #: src/slic3r/GUI/WipeTowerDialog.cpp:255 msgid "Extruder changed to" msgstr "挤出机更改为" #: src/slic3r/GUI/WipeTowerDialog.cpp:263 msgid "unloaded" msgstr "卸载" #: src/slic3r/GUI/WipeTowerDialog.cpp:264 msgid "loaded" msgstr "装载" #: src/slic3r/GUI/WipeTowerDialog.cpp:276 msgid "Tool #" msgstr "工具 #" #: src/slic3r/GUI/WipeTowerDialog.cpp:285 msgid "" "Total purging volume is calculated by summing two values below, depending on " "which tools are loaded/unloaded." msgstr "总清除量是通过求和下面的两个值来计算的, 具体取决于装载/卸载的工具。" #: src/slic3r/GUI/WipeTowerDialog.cpp:286 msgid "Volume to purge (mm³) when the filament is being" msgstr "要清除的体积 (mm³) 当耗材正在被" #: src/slic3r/GUI/WipeTowerDialog.cpp:300 msgid "From" msgstr "从" #: src/slic3r/GUI/WipeTowerDialog.cpp:365 msgid "" "Switching to simple settings will discard changes done in the advanced " "mode!\n" "\n" "Do you want to proceed?" msgstr "" "切换到简单设置将放弃在高级模式下完成的更改！\n" "\n" "是否要继续？" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show simplified settings" msgstr "显示简单设置" #: src/slic3r/GUI/WipeTowerDialog.cpp:377 msgid "Show advanced settings" msgstr "显示高级设置" #: src/slic3r/GUI/wxExtensions.cpp:651 #, possible-c-format msgid "Switch to the %s mode" msgstr "切换到 %s 模式" #: src/slic3r/GUI/wxExtensions.cpp:652 #, possible-c-format msgid "Current mode is %s" msgstr "当前模式为 %s" #: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:68 #: src/slic3r/Utils/Repetier.cpp:69 #, possible-c-format msgid "Mismatched type of print host: %s" msgstr "不匹配的打印主机类型：%s" #: src/slic3r/Utils/Duet.cpp:47 msgid "Connection to Duet works correctly." msgstr "与 Duet 的连接工作正常。" #: src/slic3r/Utils/Duet.cpp:53 msgid "Could not connect to Duet" msgstr "无法连接到 Duet" #: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:151 #: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143 #: src/slic3r/Utils/FlashAir.cpp:159 msgid "Unknown error occured" msgstr "发生未知错误" #: src/slic3r/Utils/Duet.cpp:145 msgid "Wrong password" msgstr "密码错误" #: src/slic3r/Utils/Duet.cpp:148 msgid "Could not get resources to create a new connection" msgstr "无法获取资源以创建新连接" #: src/slic3r/Utils/FixModelByWin10.cpp:219 #: src/slic3r/Utils/FixModelByWin10.cpp:359 msgid "Exporting source model" msgstr "导出源模型" #: src/slic3r/Utils/FixModelByWin10.cpp:235 msgid "Failed loading the input model." msgstr "加载输入模型失败。" #: src/slic3r/Utils/FixModelByWin10.cpp:242 msgid "Repairing model by the Netfabb service" msgstr "由 Netfabb 服务修复模型" #: src/slic3r/Utils/FixModelByWin10.cpp:248 msgid "Mesh repair failed." msgstr "网格修复失败。" #: src/slic3r/Utils/FixModelByWin10.cpp:251 #: src/slic3r/Utils/FixModelByWin10.cpp:378 msgid "Loading repaired model" msgstr "加载修复模型" #: src/slic3r/Utils/FixModelByWin10.cpp:263 #: src/slic3r/Utils/FixModelByWin10.cpp:270 #: src/slic3r/Utils/FixModelByWin10.cpp:302 msgid "Saving mesh into the 3MF container failed." msgstr "将网格保存到 3MF 容器失败。" #: src/slic3r/Utils/FixModelByWin10.cpp:340 msgid "Model fixing" msgstr "模型修复中" #: src/slic3r/Utils/FixModelByWin10.cpp:341 msgid "Exporting model" msgstr "导出模型" #: src/slic3r/Utils/FixModelByWin10.cpp:368 msgid "Export of a temporary 3mf file failed" msgstr "导出临时 3mf 文件失败" #: src/slic3r/Utils/FixModelByWin10.cpp:383 msgid "Import of the repaired 3mf file failed" msgstr "导入修复的 3mf 文件失败" #: src/slic3r/Utils/FixModelByWin10.cpp:385 msgid "Repaired 3MF file does not contain any object" msgstr "修复的 3MF 文件不包含任何对象" #: src/slic3r/Utils/FixModelByWin10.cpp:387 msgid "Repaired 3MF file contains more than one object" msgstr "修复的 3MF 文件包含多个对象" #: src/slic3r/Utils/FixModelByWin10.cpp:389 msgid "Repaired 3MF file does not contain any volume" msgstr "修复的 3MF 文件不包含任何空间" #: src/slic3r/Utils/FixModelByWin10.cpp:391 msgid "Repaired 3MF file contains more than one volume" msgstr "修复的 3MF 文件包含多个空间" #: src/slic3r/Utils/FixModelByWin10.cpp:400 msgid "Model repair finished" msgstr "模型修复完成" #: src/slic3r/Utils/FixModelByWin10.cpp:406 msgid "Model repair canceled" msgstr "模型修复取消" #: src/slic3r/Utils/FixModelByWin10.cpp:423 msgid "Model repaired successfully" msgstr "已成功修复模型" #: src/slic3r/Utils/FixModelByWin10.cpp:423 #: src/slic3r/Utils/FixModelByWin10.cpp:426 msgid "Model Repair by the Netfabb service" msgstr "通过 Netfabb 服务修复模型" #: src/slic3r/Utils/OctoPrint.cpp:83 msgid "Connection to OctoPrint works correctly." msgstr "与OctoPrint的连接工作正常。" #: src/slic3r/Utils/OctoPrint.cpp:89 msgid "Could not connect to OctoPrint" msgstr "无法连接到 OctoPrint" #: src/slic3r/Utils/OctoPrint.cpp:91 msgid "Note: OctoPrint version at least 1.1.0 is required." msgstr "注意: 至少需要1.1.0 版本的 OctoPrint." #: src/slic3r/Utils/OctoPrint.cpp:185 msgid "Connection to Prusa SL1 works correctly." msgstr "连接到 Prusa SL1 工作正常。" #: src/slic3r/Utils/OctoPrint.cpp:191 msgid "Could not connect to Prusa SLA" msgstr "无法连接到 Prusa SLA" #: src/slic3r/Utils/PresetUpdater.cpp:744 #, possible-c-format msgid "requires min. %s and max. %s" msgstr "需要最小 %s 和最大 %s" #: src/slic3r/Utils/PresetUpdater.cpp:748 #, possible-c-format msgid "requires min. %s" msgstr "需要最小 %s" #: src/slic3r/Utils/PresetUpdater.cpp:751 #, possible-c-format msgid "requires max. %s" msgstr "需要最大 %s" #: src/libslic3r/ExtrusionEntity.cpp:288 src/libslic3r/ExtrusionEntity.cpp:332 msgid "Mixed" msgstr "混合" #: src/libslic3r/miniz_extension.cpp:91 msgid "undefined error" msgstr "未定义错误" #: src/libslic3r/miniz_extension.cpp:93 msgid "too many files" msgstr "文件太多" #: src/libslic3r/miniz_extension.cpp:95 msgid "file too large" msgstr "文件太大" #: src/libslic3r/miniz_extension.cpp:97 msgid "unsupported method" msgstr "不支持的方法" #: src/libslic3r/miniz_extension.cpp:99 msgid "unsupported encryption" msgstr "不支持的加密" #: src/libslic3r/miniz_extension.cpp:101 msgid "unsupported feature" msgstr "不支持的功能" #: src/libslic3r/miniz_extension.cpp:103 msgid "failed finding central directory" msgstr "查找中心目录失败" #: src/libslic3r/miniz_extension.cpp:105 msgid "not a ZIP archive" msgstr "不是 ZIP 存档" #: src/libslic3r/miniz_extension.cpp:107 msgid "invalid header or archive is corrupted" msgstr "无效标头或存档已损坏" #: src/libslic3r/miniz_extension.cpp:109 msgid "unsupported multidisk archive" msgstr "不支持多磁盘存档" #: src/libslic3r/miniz_extension.cpp:111 msgid "decompression failed or archive is corrupted" msgstr "解压缩失败或存档已损坏" #: src/libslic3r/miniz_extension.cpp:113 msgid "compression failed" msgstr "压缩失败" #: src/libslic3r/miniz_extension.cpp:115 msgid "unexpected decompressed size" msgstr "意外解压缩大小" #: src/libslic3r/miniz_extension.cpp:117 msgid "CRC-32 check failed" msgstr "CRC-32 检查失败" #: src/libslic3r/miniz_extension.cpp:119 msgid "unsupported central directory size" msgstr "不支持的中央目录大小" #: src/libslic3r/miniz_extension.cpp:121 msgid "allocation failed" msgstr "分配失败" #: src/libslic3r/miniz_extension.cpp:123 msgid "file open failed" msgstr "文件打开失败" #: src/libslic3r/miniz_extension.cpp:125 msgid "file create failed" msgstr "文件创建失败" #: src/libslic3r/miniz_extension.cpp:127 msgid "file write failed" msgstr "文件写入失败" #: src/libslic3r/miniz_extension.cpp:129 msgid "file read failed" msgstr "文件读取失败" #: src/libslic3r/miniz_extension.cpp:131 msgid "file close failed" msgstr "文件关闭失败" #: src/libslic3r/miniz_extension.cpp:133 msgid "file seek failed" msgstr "文件查找失败" #: src/libslic3r/miniz_extension.cpp:135 msgid "file stat failed" msgstr "文件统计信息失败" #: src/libslic3r/miniz_extension.cpp:137 msgid "invalid parameter" msgstr "无效参数" #: src/libslic3r/miniz_extension.cpp:139 msgid "invalid filename" msgstr "无效的文件名" #: src/libslic3r/miniz_extension.cpp:141 msgid "buffer too small" msgstr "缓冲区太小" #: src/libslic3r/miniz_extension.cpp:143 msgid "internal error" msgstr "内部错误" #: src/libslic3r/miniz_extension.cpp:145 msgid "file not found" msgstr "文件未找到" #: src/libslic3r/miniz_extension.cpp:147 msgid "archive is too large" msgstr "存档太大" #: src/libslic3r/miniz_extension.cpp:149 msgid "validation failed" msgstr "验证失败" #: src/libslic3r/miniz_extension.cpp:151 msgid "write calledback failed" msgstr "写入回叫失败" #: src/libslic3r/Preset.cpp:1549 msgid "filament" msgstr "丝" #: src/libslic3r/Print.cpp:1361 msgid "All objects are outside of the print volume." msgstr "所有对象都在打印范围之外。" #: src/libslic3r/Print.cpp:1364 msgid "The supplied settings will cause an empty print." msgstr "当前提供的设置将导致空打印。" #: src/libslic3r/Print.cpp:1368 msgid "Some objects are too close; your extruder will collide with them." msgstr "有些对象太近; 你的挤出机会和他们相撞。" #: src/libslic3r/Print.cpp:1370 msgid "" "Some objects are too tall and cannot be printed without extruder collisions." msgstr "某些对象太高, 无法在挤出机不冲突的情况下打印。" #: src/libslic3r/Print.cpp:1387 msgid "" "The Spiral Vase option can only be used when printing single material " "objects." msgstr "螺旋花瓶选项只能在打印单个材质对象时使用。" #: src/libslic3r/Print.cpp:1400 msgid "" "The wipe tower is only supported if all extruders have the same nozzle " "diameter and use filaments of the same diameter." msgstr "" "仅当所有挤出机具有相同的喷嘴直径并使用相同直径的耗材丝时,才支持擦料塔。" #: src/libslic3r/Print.cpp:1406 msgid "" "The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter " "and Repetier G-code flavors." msgstr "擦料塔目前只支持 Marlin, RepRap/Sprinter 和 Repetier G-code 类型。" #: src/libslic3r/Print.cpp:1408 msgid "" "The Wipe Tower is currently only supported with the relative extruder " "addressing (use_relative_e_distances=1)." msgstr "擦料塔目前仅支持相对挤出机寻址 (use_relative_e_distances=1)。" #: src/libslic3r/Print.cpp:1410 msgid "Ooze prevention is currently not supported with the wipe tower enabled." msgstr "启用擦料塔时，当前不支持 Ooze 预防。" #: src/libslic3r/Print.cpp:1435 msgid "" "The Wipe Tower is only supported for multiple objects if they have equal " "layer heights" msgstr "仅当多个对象具有相等的图层高度时,才支持擦料塔" #: src/libslic3r/Print.cpp:1437 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "over an equal number of raft layers" msgstr "只有在相同数量的基座层上打印的对象时, 才支持擦料塔" #: src/libslic3r/Print.cpp:1441 msgid "" "The Wipe Tower is only supported for multiple objects if they are printed " "with the same support_material_contact_distance" msgstr "" "只有在使用相同的support_material_contact_distance（支撑材料距离）打印多个对象" "时, 才支持擦料塔" #: src/libslic3r/Print.cpp:1443 msgid "" "The Wipe Tower is only supported for multiple objects if they are sliced " "equally." msgstr "只有在多个对象被平均切割的情况下, 才支持擦料塔。" #: src/libslic3r/Print.cpp:1511 msgid "" "One or more object were assigned an extruder that the printer does not have." msgstr "为一个或多个对象分配了打印机没有的挤出机。" #: src/libslic3r/Print.cpp:1520 #, possible-c-format msgid "%1%=%2% mm is too low to be printable at a layer height %3% mm" msgstr "%1%=%2% mm 太低，在图层高度 %3% mm 时无法打印" #: src/libslic3r/Print.cpp:1523 #, possible-c-format msgid "Excessive %1%=%2% mm to be printable with a nozzle diameter %3% mm" msgstr "过量 %1%=%2% mm 可打印，使用喷嘴直径 %3% mm" #: src/libslic3r/Print.cpp:1534 msgid "" "Printing with multiple extruders of differing nozzle diameters. If support " "is to be printed with the current extruder (support_material_extruder == 0 " "or support_material_interface_extruder == 0), all nozzles have to be of the " "same diameter." msgstr "" "使用不同喷嘴直径的多个挤出机进行打印。如果要使用当前挤出机" "(support_material_extruder == 0 或 support_material_interface_extruder == 0)" "打印支撑物, 则所有喷嘴的直径必须相同。" #: src/libslic3r/Print.cpp:1542 msgid "" "For the Wipe Tower to work with the soluble supports, the support layers " "need to be synchronized with the object layers." msgstr "要使擦料塔与可溶性支撑配合使用, 支撑层需要与对象图层同步。" #: src/libslic3r/Print.cpp:1546 msgid "" "The Wipe Tower currently supports the non-soluble supports only if they are " "printed with the current extruder without triggering a tool change. (both " "support_material_extruder and support_material_interface_extruder need to be " "set to 0)." msgstr "" "只有在不触发工具更改的情况下, 使用当前挤出机打印的未溶性支撑塔目前才支持不可" "溶支撑于的支架。(support_material_extruder 和" "support_material_interface_extruder 都需要设置为 0)。" #: src/libslic3r/Print.cpp:1568 msgid "First layer height can't be greater than nozzle diameter" msgstr "第一层高度不能大于喷嘴直径" #: src/libslic3r/Print.cpp:1573 msgid "Layer height can't be greater than nozzle diameter" msgstr "层高度不能大于喷嘴直径" #: src/libslic3r/Print.cpp:1733 msgid "Infilling layers" msgstr "填充图层" #: src/libslic3r/Print.cpp:1763 msgid "Generating skirt" msgstr "生成裙边" #: src/libslic3r/Print.cpp:1820 msgid "Generating brim" msgstr "生成外围裙边" #: src/libslic3r/Print.cpp:1882 msgid "Exporting G-code" msgstr "导出 G 代码" #: src/libslic3r/Print.cpp:1886 msgid "Generating G-code" msgstr "生成 G 代码" #: src/libslic3r/PrintBase.cpp:72 msgid "Failed processing of the output_filename_format template." msgstr "模板output_filename_format 处理失败。" #: src/libslic3r/PrintConfig.cpp:49 src/libslic3r/PrintConfig.cpp:50 msgid "Printer technology" msgstr "打印机技术" #: src/libslic3r/PrintConfig.cpp:58 msgid "Bed shape" msgstr "打印平台形状" #: src/libslic3r/PrintConfig.cpp:64 msgid "Bed custom texture" msgstr "床自定义纹理" #: src/libslic3r/PrintConfig.cpp:70 msgid "Bed custom model" msgstr "床自定义模型" #: src/libslic3r/PrintConfig.cpp:113 msgid "" "This setting controls the height (and thus the total number) of the slices/" "layers. Thinner layers give better accuracy but take more time to print." msgstr "" "此设置控制切片/图层的高度（以及总数）。较薄的图层具有更高的精度，但打印时间更" "长。" #: src/libslic3r/PrintConfig.cpp:121 msgid "Max print height" msgstr "最大打印高度" #: src/libslic3r/PrintConfig.cpp:123 msgid "" "Set this to the maximum height that can be reached by your extruder while " "printing." msgstr "将此设置为挤出头在打印时可以达到的最大高度。" #: src/libslic3r/PrintConfig.cpp:131 msgid "Slice gap closing radius" msgstr "切片间隙闭合半径" #: src/libslic3r/PrintConfig.cpp:133 msgid "" "Cracks smaller than 2x gap closing radius are being filled during the " "triangle mesh slicing. The gap closing operation may reduce the final print " "resolution, therefore it is advisable to keep the value reasonably low." msgstr "" "在三角形网格切片过程中，小于 2 倍间隙闭合半径的裂纹将被填充。间隙闭合操作可能" "会降低最终打印分辨率，因此建议将值保持在合理的较低水平。" #: src/libslic3r/PrintConfig.cpp:141 src/libslic3r/PrintConfig.cpp:2707 msgid "Hostname, IP or URL" msgstr "主机名, IP 或 URL" #: src/libslic3r/PrintConfig.cpp:151 src/libslic3r/PrintConfig.cpp:2692 msgid "API Key / Password" msgstr "API 密钥/密码" #: src/libslic3r/PrintConfig.cpp:153 src/libslic3r/PrintConfig.cpp:2694 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the API Key or the password required for authentication." msgstr "" "Slic3r 可以将 G-code 文件上传到打印机主机。此字段应包含 API 密钥或身份验证所" "需的密码。" #: src/libslic3r/PrintConfig.cpp:168 src/libslic3r/PrintConfig.cpp:2701 msgid "" "Custom CA certificate file can be specified for HTTPS OctoPrint connections, " "in crt/pem format. If left blank, the default OS CA certificate repository " "is used." msgstr "" "可以为 HTTPS OctoPrint 连接指定自定义 CA 证书文件,格式为 crt/pem 格式。如果留" "空,则使用默认的 OS CA 证书存储库。" #: src/libslic3r/PrintConfig.cpp:222 msgid "Avoid crossing perimeters" msgstr "避免跨越轮廓边界" #: src/libslic3r/PrintConfig.cpp:224 msgid "" "Optimize travel moves in order to minimize the crossing of perimeters. This " "is mostly useful with Bowden extruders which suffer from oozing. This " "feature slows down both the print and the G-code generation." msgstr "" "优化移动移动，以尽量减少周界交叉。这在鲍登挤出机中最有用，它们容易渗漏。此功" "能可降低打印和 G 代码生成速度。" #: src/libslic3r/PrintConfig.cpp:249 src/libslic3r/PrintConfig.cpp:3826 msgid "Other layers" msgstr "其他图层" #: src/libslic3r/PrintConfig.cpp:251 msgid "" "Bed temperature for layers after the first one. Set this to zero to disable " "bed temperature control commands in the output." msgstr "第一层之后层的床温。将此设置为零以禁用输出中的床温控制命令。" #: src/libslic3r/PrintConfig.cpp:254 msgid "Bed temperature" msgstr "热床温度" #: src/libslic3r/PrintConfig.cpp:261 msgid "Before layer change G-code" msgstr "在图层更改 G 代码之前" #: src/libslic3r/PrintConfig.cpp:263 msgid "" "This custom code is inserted at every layer change, right before the Z move. " "Note that you can use placeholder variables for all Slic3r settings as well " "as [layer_num] and [layer_z]." msgstr "" "此自定义代码在 Z 移动之前，每次图层更改时都会插入。请注意，您可以将占位符变量" "用于所有 Slic3r 设置以及 [layer_num] 和 [layer_z]。" #: src/libslic3r/PrintConfig.cpp:273 msgid "Between objects G-code" msgstr "对象之间的 G-code" #: src/libslic3r/PrintConfig.cpp:275 msgid "" "This code is inserted between objects when using sequential printing. By " "default extruder and bed temperature are reset using non-wait command; " "however if M104, M109, M140 or M190 are detected in this custom code, Slic3r " "will not add temperature commands. Note that you can use placeholder " "variables for all Slic3r settings, so you can put a \"M109 S" "[first_layer_temperature]\" command wherever you want." msgstr "" "使用顺序打印时, 此代码将插入对象之间。默认情况下, 使用非等待命令重置挤出机和" "床温;但是, 如果在此自定义代码中检测到 m104、m109、m140 或 m190, Slic3r 将不会" "添加温度命令。请注意, 您可以对所有 Slic3r 设置使用占位符变量, 因此您可以将 " "\"M109 S[first_layer_temperature]\" 命令放在任何需要的地方。" #: src/libslic3r/PrintConfig.cpp:286 msgid "Number of solid layers to generate on bottom surfaces." msgstr "要在底部曲面上生成的实心图层数。" #: src/libslic3r/PrintConfig.cpp:287 msgid "Bottom solid layers" msgstr "底部实心层" #: src/libslic3r/PrintConfig.cpp:302 src/libslic3r/PrintConfig.cpp:352 msgid "Bridge" msgstr "网桥" #: src/libslic3r/PrintConfig.cpp:315 msgid "Bridging angle" msgstr "桥接角度" #: src/libslic3r/PrintConfig.cpp:317 msgid "" "Bridging angle override. If left to zero, the bridging angle will be " "calculated automatically. Otherwise the provided angle will be used for all " "bridges. Use 180° for zero angle." msgstr "" "桥接角度覆盖。如果设为零，将自动计算桥接角度。否则，提供的角度将用于所有桥" "接。使用 180° 实现零角度。" #: src/libslic3r/PrintConfig.cpp:326 msgid "Bridges fan speed" msgstr "桥接风扇速度" #: src/libslic3r/PrintConfig.cpp:353 msgid "Bridge flow ratio" msgstr "桥接流量比" #: src/libslic3r/PrintConfig.cpp:356 msgid "" "This factor affects the amount of plastic for bridging. You can decrease it " "slightly to pull the extrudates and prevent sagging, although default " "settings are usually good and you should experiment with cooling (use a fan) " "before tweaking this." msgstr "" "此因子影响用于桥接的耗材量。您可以稍微减小它挤出和防止下垂，虽然默认设置通常" "很好，您应该尝试冷却（使用风扇），然后再调整它。" #: src/libslic3r/PrintConfig.cpp:390 msgid "Bridges" msgstr "桥接" #: src/libslic3r/PrintConfig.cpp:393 msgid "Speed for printing bridges." msgstr "打印桥接的速度。" #: src/libslic3r/PrintConfig.cpp:394 src/libslic3r/PrintConfig.cpp:405 #: src/libslic3r/PrintConfig.cpp:1226 src/libslic3r/PrintConfig.cpp:1262 #: src/libslic3r/PrintConfig.cpp:1353 src/libslic3r/PrintConfig.cpp:1362 #: src/libslic3r/PrintConfig.cpp:1370 src/libslic3r/PrintConfig.cpp:1397 #: src/libslic3r/PrintConfig.cpp:1416 src/libslic3r/PrintConfig.cpp:1868 #: src/libslic3r/PrintConfig.cpp:2193 src/libslic3r/PrintConfig.cpp:2276 #: src/libslic3r/PrintConfig.cpp:2409 src/libslic3r/PrintConfig.cpp:2443 #: src/libslic3r/PrintConfig.cpp:2455 src/libslic3r/PrintConfig.cpp:2465 #: src/libslic3r/PrintConfig.cpp:2530 src/libslic3r/PrintConfig.cpp:2637 #: src/libslic3r/PrintConfig.cpp:2747 src/libslic3r/PrintConfig.cpp:2893 #: src/libslic3r/PrintConfig.cpp:3125 src/libslic3r/PrintConfig.cpp:3135 #: src/libslic3r/PrintConfig.cpp:3790 src/libslic3r/PrintConfig.cpp:3914 #: src/libslic3r/PrintConfig.cpp:4030 src/libslic3r/PrintConfig.cpp:4511 msgid "mm/s" msgstr "mm/s" #: src/libslic3r/PrintConfig.cpp:420 msgid "Brim width" msgstr "裙边宽度" #: src/libslic3r/PrintConfig.cpp:422 msgid "" "Horizontal width of the brim that will be printed around each object on the " "first layer." msgstr "打印在第一层上每个对象周围的外围裙边的宽度。" #: src/libslic3r/PrintConfig.cpp:468 src/libslic3r/PrintConfig.cpp:1612 #: src/libslic3r/PrintConfig.cpp:3739 src/libslic3r/PrintConfig.cpp:3754 msgid "Pattern" msgstr "模式" #: src/libslic3r/PrintConfig.cpp:476 src/libslic3r/PrintConfig.cpp:727 #: src/libslic3r/PrintConfig.cpp:755 src/libslic3r/PrintConfig.cpp:783 #: src/libslic3r/PrintConfig.cpp:1641 src/libslic3r/PrintConfig.cpp:3768 msgid "Concentric" msgstr "回环" #: src/libslic3r/PrintConfig.cpp:477 src/libslic3r/PrintConfig.cpp:724 #: src/libslic3r/PrintConfig.cpp:752 src/libslic3r/PrintConfig.cpp:780 #: src/libslic3r/PrintConfig.cpp:1634 src/libslic3r/PrintConfig.cpp:3747 #: src/libslic3r/PrintConfig.cpp:3766 msgid "Rectilinear" msgstr "直线" #: src/libslic3r/PrintConfig.cpp:502 msgid "Clip multi-part objects" msgstr "剪切多部分对象" #: src/libslic3r/PrintConfig.cpp:504 msgid "" "When printing multi-material objects, this settings will make Slic3r to clip " "the overlapping object parts one by the other (2nd part will be clipped by " "the 1st, 3rd part will be clipped by the 1st and 2nd etc)." msgstr "" "打印多材质对象时，此设置将使 Slic3r 将重叠对象部件逐一裁剪（第 2 部分将在第 " "1 部分中剪切，第 3 部分由第 1 部分和第 2 部分剪切等）。" #: src/libslic3r/PrintConfig.cpp:511 msgid "Colorprint height" msgstr "彩色打印高度" #: src/libslic3r/PrintConfig.cpp:513 msgid "Heights at which a filament change is to occur. " msgstr "发生耗材变化的高度。. " #: src/libslic3r/PrintConfig.cpp:523 msgid "Compatible printers condition" msgstr "兼容打印机条件" #: src/libslic3r/PrintConfig.cpp:524 msgid "" "A boolean expression using the configuration values of an active printer " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active printer profile." msgstr "" "使用活动打印机配置文件的配置值的布尔表达式。如果此表达式计算为 true,则此配置" "文件将被视为与活动打印机配置文件兼容。" #: src/libslic3r/PrintConfig.cpp:538 msgid "Compatible print profiles condition" msgstr "兼容的打印配置文件条件" #: src/libslic3r/PrintConfig.cpp:539 msgid "" "A boolean expression using the configuration values of an active print " "profile. If this expression evaluates to true, this profile is considered " "compatible with the active print profile." msgstr "" "使用活动打印配置文件的配置值的布尔表达式。如果此表达式计算为 true,则此配置文" "件将被视为与活动打印配置文件兼容。" #: src/libslic3r/PrintConfig.cpp:556 msgid "Complete individual objects" msgstr "完成单个对象" #: src/libslic3r/PrintConfig.cpp:558 msgid "" "When printing multiple objects or copies, this feature will complete each " "object before moving onto next one (and starting it from its bottom layer). " "This feature is useful to avoid the risk of ruined prints. Slic3r should " "warn and prevent you from extruder collisions, but beware." msgstr "" "打印多个对象或副本时，此功能将完成每个对象，然后再移动到下一个对象（并从其底" "层开始）。此功能可用于避免打印损坏的风险。Slic3r 应警告并防止挤出机碰撞，但要" "小心。" #: src/libslic3r/PrintConfig.cpp:592 msgid "Enable auto cooling" msgstr "启用自动冷却" #: src/libslic3r/PrintConfig.cpp:594 msgid "" "This flag enables the automatic cooling logic that adjusts print speed and " "fan speed according to layer printing time." msgstr "此标志启用自动冷却逻辑，可根据图层打印时间调整打印速度和风扇速度。" #: src/libslic3r/PrintConfig.cpp:600 msgid "Cooling tube position" msgstr "冷却管位置" #: src/libslic3r/PrintConfig.cpp:602 msgid "Distance of the center-point of the cooling tube from the extruder tip." msgstr "冷却管中心点与挤出机尖端的距离。" #: src/libslic3r/PrintConfig.cpp:609 msgid "Cooling tube length" msgstr "冷却管长度" #: src/libslic3r/PrintConfig.cpp:611 msgid "Length of the cooling tube to limit space for cooling moves inside it." msgstr "冷却管的长度，以限制冷却管内部的冷却移动空间。" #: src/libslic3r/PrintConfig.cpp:631 msgid "Default filament profile" msgstr "默认耗材配置文件" #: src/libslic3r/PrintConfig.cpp:632 msgid "" "Default filament profile associated with the current printer profile. On " "selection of the current printer profile, this filament profile will be " "activated." msgstr "" "与当前打印机配置文件关联的默认耗材丝配置文件。在选择当前打印机配置文件时, 将" "激活此耗材丝丝配置文件。" #: src/libslic3r/PrintConfig.cpp:638 msgid "Default print profile" msgstr "默认打印配置文件" #: src/libslic3r/PrintConfig.cpp:639 src/libslic3r/PrintConfig.cpp:4763 #: src/libslic3r/PrintConfig.cpp:4774 msgid "" "Default print profile associated with the current printer profile. On " "selection of the current printer profile, this print profile will be " "activated." msgstr "" "与当前打印机配置文件关联的默认打印配置文件。选择当前打印机配置文件时，将激活" "此打印配置文件。" #: src/libslic3r/PrintConfig.cpp:645 msgid "Disable fan for the first" msgstr "禁用风扇在前" #: src/libslic3r/PrintConfig.cpp:647 msgid "" "You can set this to a positive value to disable fan at all during the first " "layers, so that it does not make adhesion worse." msgstr "" "您可以将此值设置为正值，以便在初始图层期间完全禁用风扇，以免使粘附性恶化。" #: src/libslic3r/PrintConfig.cpp:656 msgid "Don't support bridges" msgstr "不支持桥接" #: src/libslic3r/PrintConfig.cpp:658 msgid "" "Experimental option for preventing support material from being generated " "under bridged areas." msgstr "防止在桥接区域下生成支撑材料的实验选项。" #: src/libslic3r/PrintConfig.cpp:666 msgid "Distance used for the auto-arrange feature of the plater." msgstr "用于构建板自动排列功能的距离。" #: src/libslic3r/PrintConfig.cpp:673 src/libslic3r/PrintConfig.cpp:684 msgid "End G-code" msgstr "结尾 G-code" #: src/libslic3r/PrintConfig.cpp:698 msgid "Ensure vertical shell thickness" msgstr "确保垂直外壳厚度" #: src/libslic3r/PrintConfig.cpp:700 msgid "" "Add solid infill near sloping surfaces to guarantee the vertical shell " "thickness (top+bottom solid layers)." msgstr "" "在靠近倾斜表面附近添加实体填充，以保证垂直壳体厚度（顶部+底部实心层）。" #: src/libslic3r/PrintConfig.cpp:709 msgid "" "Fill pattern for top infill. This only affects the top visible layer, and " "not its adjacent solid shells." msgstr "填充顶部填充的模式。这仅影响顶部可见图层，而不影响其相邻的实体壳。" #: src/libslic3r/PrintConfig.cpp:729 src/libslic3r/PrintConfig.cpp:757 #: src/libslic3r/PrintConfig.cpp:785 src/libslic3r/PrintConfig.cpp:1645 #: src/libslic3r/PrintConfig.cpp:3770 msgid "Hilbert Curve" msgstr "希尔伯特曲线" #: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:758 #: src/libslic3r/PrintConfig.cpp:786 src/libslic3r/PrintConfig.cpp:1646 msgid "Archimedean Chords" msgstr "阿基米德和弦" #: src/libslic3r/PrintConfig.cpp:731 src/libslic3r/PrintConfig.cpp:759 #: src/libslic3r/PrintConfig.cpp:787 src/libslic3r/PrintConfig.cpp:1647 msgid "Octagram Spiral" msgstr "八角螺旋" #: src/libslic3r/PrintConfig.cpp:738 msgid "Bottom fill pattern" msgstr "底部填充模式" #: src/libslic3r/PrintConfig.cpp:824 src/libslic3r/PrintConfig.cpp:838 msgid "External perimeters" msgstr "外部轮廓" #: src/libslic3r/PrintConfig.cpp:830 src/libslic3r/PrintConfig.cpp:843 #: src/libslic3r/PrintConfig.cpp:1160 src/libslic3r/PrintConfig.cpp:1173 #: src/libslic3r/PrintConfig.cpp:1744 src/libslic3r/PrintConfig.cpp:1758 #: src/libslic3r/PrintConfig.cpp:1773 src/libslic3r/PrintConfig.cpp:1983 #: src/libslic3r/PrintConfig.cpp:2139 src/libslic3r/PrintConfig.cpp:2153 #: src/libslic3r/PrintConfig.cpp:2183 src/libslic3r/PrintConfig.cpp:2627 #: src/libslic3r/PrintConfig.cpp:2866 src/libslic3r/PrintConfig.cpp:2880 #: src/libslic3r/PrintConfig.cpp:3279 src/libslic3r/PrintConfig.cpp:3293 #: src/libslic3r/PrintConfig.cpp:3390 src/libslic3r/PrintConfig.cpp:3404 #: src/libslic3r/PrintConfig.cpp:3586 src/libslic3r/PrintConfig.cpp:3685 #: src/libslic3r/PrintConfig.cpp:3967 src/libslic3r/PrintConfig.cpp:3980 #: src/libslic3r/PrintConfig.cpp:4493 src/libslic3r/PrintConfig.cpp:4502 msgid "mm or %" msgstr "mm 或 %" #: src/libslic3r/PrintConfig.cpp:922 msgid "" "This separate setting will affect the speed of external perimeters (the " "visible ones). If expressed as percentage (for example: 80%) it will be " "calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" "此单独的设置将影响外部轮廓（可见轮廓）的速度。如果以百分比表示（例如：80%）它" "将在上述周界速度设置上计算。为自动设置为零。" #: src/libslic3r/PrintConfig.cpp:925 src/libslic3r/PrintConfig.cpp:1788 #: src/libslic3r/PrintConfig.cpp:1802 src/libslic3r/PrintConfig.cpp:3267 #: src/libslic3r/PrintConfig.cpp:3419 src/libslic3r/PrintConfig.cpp:3732 #: src/libslic3r/PrintConfig.cpp:3997 msgid "mm/s or %" msgstr "mm/s 或 %" #: src/libslic3r/PrintConfig.cpp:933 msgid "External perimeters first" msgstr "首先打印外部轮廓" #: src/libslic3r/PrintConfig.cpp:935 msgid "" "Print contour perimeters from the outermost one to the innermost one instead " "of the default inverse order." msgstr "将轮廓周长从最外层的轮廓打印到最里面的轮廓，而不是默认的反向顺序。" #: src/libslic3r/PrintConfig.cpp:981 src/libslic3r/PrintConfig.cpp:3140 msgid "Seam position" msgstr "接缝位置" #: src/libslic3r/PrintConfig.cpp:984 msgid "Position of perimeters starting points." msgstr "轮廓起点的位置。" #: src/libslic3r/PrintConfig.cpp:988 msgid "Nearest" msgstr "最近的" #: src/libslic3r/PrintConfig.cpp:1042 msgid "" "The extruder to use (unless more specific extruder settings are specified). " "This value overrides perimeter and infill extruders, but not the support " "extruders." msgstr "" "要使用的挤出机（除非指定了更具体的挤出机设置）。此值覆盖轮廓和填充挤出机，但" "不覆盖支撑挤出机。" #: src/libslic3r/PrintConfig.cpp:1060 msgid "" "Set this to the vertical distance between your nozzle tip and (usually) the " "X carriage rods. In other words, this is the height of the clearance " "cylinder around your extruder, and it represents the maximum depth the " "extruder can peek before colliding with other printed objects." msgstr "" "将此设置为喷嘴尖端和（通常）X 滑杆之间的垂直距离。换句话说，这是挤出机周围的" "间隙圆柱体的高度，它表示挤出机在与其他打印对象碰撞之前可以窥视的最大深度。" #: src/libslic3r/PrintConfig.cpp:1073 msgid "" "Set this to the clearance radius around your extruder. If the extruder is " "not centered, choose the largest value for safety. This setting is used to " "check for collisions and to display the graphical preview in the plater." msgstr "" "将此设置为挤出机周围的间隙半径。如果挤出机未居中，请选择最大安全值。此设置用" "于检查碰撞并在板中显示图形预览。" #: src/libslic3r/PrintConfig.cpp:1083 msgid "Extruder Color" msgstr "挤出头颜色" #: src/libslic3r/PrintConfig.cpp:1085 src/libslic3r/PrintConfig.cpp:1205 msgid "This is only used in the Slic3r interface as a visual help." msgstr "这仅在 Slic3r 界面中用作视觉帮助。" #: src/libslic3r/PrintConfig.cpp:1092 msgid "Extruder offset" msgstr "挤出机偏移" #: src/libslic3r/PrintConfig.cpp:1094 src/libslic3r/PrintConfig.cpp:4436 msgid "" "If your firmware doesn't handle the extruder displacement you need the G-" "code to take it into account. This option lets you specify the displacement " "of each extruder with respect to the first one. It expects positive " "coordinates (they will be subtracted from the XY coordinate)." msgstr "" "如果您的固件不处理挤出机位移位，则需要 G 代码来考虑它。此选项允许您指定每个挤" "出机相对于第一个挤出机的位移。需要填写正坐标（它们将从 XY 坐标中减去）。" #: src/libslic3r/PrintConfig.cpp:1122 msgid "Extrusion axis" msgstr "挤出轴" #: src/libslic3r/PrintConfig.cpp:1124 msgid "" "Use this option to set the axis letter associated to your printer's extruder " "(usually E but some printers use A)." msgstr "" "使用此选项可设置与打印机挤出机关联的轴字母（通常为 E，但某些打印机使用 A）。" #: src/libslic3r/PrintConfig.cpp:1129 src/libslic3r/PrintConfig.cpp:1140 msgid "Extrusion multiplier" msgstr "挤出乘数" #: src/libslic3r/PrintConfig.cpp:1131 msgid "" "This factor changes the amount of flow proportionally. You may need to tweak " "this setting to get nice surface finish and correct single wall widths. " "Usual values are between 0.9 and 1.1. If you think you need to change this " "more, check filament diameter and your firmware E steps." msgstr "" "此因子按比例更改流量。您可能需要调整此设置，以获得漂亮的表面光洁度和正确的单" "壁宽度。通常值介于 0.9 和 1.1 之间。如果您认为需要更改更多，请检查耗材丝直径" "和固件 E 步骤。" #: src/libslic3r/PrintConfig.cpp:1154 msgid "Default extrusion width" msgstr "默认挤出宽度" #: src/libslic3r/PrintConfig.cpp:1182 msgid "Keep fan always on" msgstr "始终保持风扇打开" #: src/libslic3r/PrintConfig.cpp:1190 msgid "Enable fan if layer print time is below" msgstr "启用风扇，如果图层打印时间低于" #: src/libslic3r/PrintConfig.cpp:1195 src/libslic3r/PrintConfig.cpp:3254 msgid "approximate seconds" msgstr "近似秒" #: src/libslic3r/PrintConfig.cpp:1211 msgid "Filament notes" msgstr "耗材丝备注" #: src/libslic3r/PrintConfig.cpp:1213 msgid "You can put your notes regarding the filament here." msgstr "你可以把关于耗材丝的笔记放在这里。" #: src/libslic3r/PrintConfig.cpp:1232 src/libslic3r/PrintConfig.cpp:2546 msgid "Max volumetric speed" msgstr "最大体积速度" #: src/libslic3r/PrintConfig.cpp:1234 msgid "" "Maximum volumetric speed allowed for this filament. Limits the maximum " "volumetric speed of a print to the minimum of print and filament volumetric " "speed. Set to zero for no limit." msgstr "" "此耗材丝允许的最大体积速度。将打印的最大体积速度限制为最小打印和耗材丝体积速" "度。设置为零，无限制。" #: src/libslic3r/PrintConfig.cpp:1260 msgid "Loading speed" msgstr "加载速度" #: src/libslic3r/PrintConfig.cpp:1261 msgid "Speed used for loading the filament on the wipe tower. " msgstr "用于在擦料塔上装载耗材丝的速度。. " #: src/libslic3r/PrintConfig.cpp:1351 msgid "Loading speed at the start" msgstr "开始时加载速度" #: src/libslic3r/PrintConfig.cpp:1352 msgid "Speed used at the very beginning of loading phase. " msgstr "在加载阶段开始时使用的速度。. " #: src/libslic3r/PrintConfig.cpp:1359 msgid "Unloading speed" msgstr "卸载速度" #: src/libslic3r/PrintConfig.cpp:1360 msgid "" "Speed used for unloading the filament on the wipe tower (does not affect " "initial part of unloading just after ramming). " msgstr "用于卸载擦聊塔上的耗材丝的速度（不影响冲压后卸载的初始部分）。. " #: src/libslic3r/PrintConfig.cpp:1368 msgid "Unloading speed at the start" msgstr "开始时卸载速度" #: src/libslic3r/PrintConfig.cpp:1369 msgid "" "Speed used for unloading the tip of the filament immediately after ramming. " msgstr "冲压后立即卸载耗材尖端的速度。. " #: src/libslic3r/PrintConfig.cpp:1376 msgid "Delay after unloading" msgstr "卸载后延迟" #: src/libslic3r/PrintConfig.cpp:1377 msgid "" "Time to wait after the filament is unloaded. May help to get reliable " "toolchanges with flexible materials that may need more time to shrink to " "original dimensions. " msgstr "卸下耗材丝后等待的时间。通过弹性材料，可能需要更多时间缩小到原始尺寸，有助于获得可靠的挤出机更换。. " #: src/libslic3r/PrintConfig.cpp:1386 msgid "Number of cooling moves" msgstr "冷却移动次数" #: src/libslic3r/PrintConfig.cpp:1387 msgid "" "Filament is cooled by being moved back and forth in the cooling tubes. " "Specify desired number of these moves." msgstr "在冷却管中来回移动，使耗材丝冷却。指定这些移动的所需数量。" #: src/libslic3r/PrintConfig.cpp:1395 msgid "Speed of the first cooling move" msgstr "第一次冷却移动的速度" #: src/libslic3r/PrintConfig.cpp:1396 msgid "Cooling moves are gradually accelerating beginning at this speed. " msgstr "冷却运动正逐渐以这个速度加速。. " #: src/libslic3r/PrintConfig.cpp:1403 msgid "Minimal purge on wipe tower" msgstr "擦料塔上的最小清理量" #: src/libslic3r/PrintConfig.cpp:1404 msgid "" "After a tool change, the exact position of the newly loaded filament inside " "the nozzle may not be known, and the filament pressure is likely not yet " "stable. Before purging the print head into an infill or a sacrificial " "object, Slic3r will always prime this amount of material into the wipe tower " "to produce successive infill or sacrificial object extrusions reliably." msgstr "" "换料后, 新加载的耗材丝在喷嘴内的确切位置可能尚不清楚, 而且耗材丝压力可能尚不" "稳定。在将打印头清洗成填充物或填充对象之前, Slic3r 将始终将这些数量的材料放入" "擦料塔中, 以可靠地产生连续的填充物或填充对象。" #: src/libslic3r/PrintConfig.cpp:1408 msgid "mm³" msgstr "mm³" #: src/libslic3r/PrintConfig.cpp:1414 msgid "Speed of the last cooling move" msgstr "上次冷却移动的速度" #: src/libslic3r/PrintConfig.cpp:1415 msgid "Cooling moves are gradually accelerating towards this speed. " msgstr "冷却移动正逐渐加速向此速度。. " #: src/libslic3r/PrintConfig.cpp:1422 msgid "Filament load time" msgstr "耗材丝加载时间" #: src/libslic3r/PrintConfig.cpp:1423 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to load a new " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" "打印机固件 (或Multi Material Unit 2.0) 在工具更换期间 (执行 T 代码时) 加载新" "耗材丝的时间。 G-code时间估计器将此时间添加到总打印时间中。" #: src/libslic3r/PrintConfig.cpp:1430 msgid "Ramming parameters" msgstr "冲击参数" #: src/libslic3r/PrintConfig.cpp:1431 msgid "" "This string is edited by RammingDialog and contains ramming specific " "parameters." msgstr "此字符串由 RammingDialog 编辑，包含冲压特定参数。" #: src/libslic3r/PrintConfig.cpp:1437 msgid "Filament unload time" msgstr "耗材丝卸载时间" #: src/libslic3r/PrintConfig.cpp:1438 msgid "" "Time for the printer firmware (or the Multi Material Unit 2.0) to unload a " "filament during a tool change (when executing the T code). This time is " "added to the total print time by the G-code time estimator." msgstr "" "打印机固件 (或Multi Material Unit 2.0) 在工具更换期间 (执行 T 代码时) 卸载耗" "材丝的时间。 G-code时间估计器将此时间添加到总打印时间中。" #: src/libslic3r/PrintConfig.cpp:1446 msgid "" "Enter your filament diameter here. Good precision is required, so use a " "caliper and do multiple measurements along the filament, then compute the " "average." msgstr "" "在此处输入您的耗材丝直径。需要比较好的精度，建议使用卡钳沿耗材丝进行多次测" "量，然后计算平均值。" #: src/libslic3r/PrintConfig.cpp:1465 src/libslic3r/PrintConfig.cpp:4674 #: src/libslic3r/PrintConfig.cpp:4675 msgid "Density" msgstr "密度" #: src/libslic3r/PrintConfig.cpp:1467 msgid "" "Enter your filament density here. This is only for statistical information. " "A decent way is to weigh a known length of filament and compute the ratio of " "the length to volume. Better is to calculate the volume directly through " "displacement." msgstr "" "在此处输入您的耗材丝密度。这仅用于统计信息。一个方法是称量已知长度的耗材丝，" "并计算长度与体积的比率。最好通过位移直接计算体积。" #: src/libslic3r/PrintConfig.cpp:1470 msgid "g/cm³" msgstr "g/cm³" #: src/libslic3r/PrintConfig.cpp:1476 msgid "Filament type" msgstr "耗材类型" #: src/libslic3r/PrintConfig.cpp:1478 msgid "The filament material type for use in custom G-codes." msgstr "用于自定义 G-codes的耗材丝材料类型。" #: src/libslic3r/PrintConfig.cpp:1514 msgid "Soluble material" msgstr "可溶性材料" #: src/libslic3r/PrintConfig.cpp:1516 msgid "Soluble material is most likely used for a soluble support." msgstr "可溶性材料最有可能用于可溶性支撑。" #: src/libslic3r/PrintConfig.cpp:1524 msgid "" "Enter your filament cost per kg here. This is only for statistical " "information." msgstr "在此处输入每公斤耗材丝成本。这仅用于统计信息。" #: src/libslic3r/PrintConfig.cpp:1525 msgid "money/kg" msgstr "元/公斤" #: src/libslic3r/PrintConfig.cpp:1550 msgid "Fill angle" msgstr "填充角度" #: src/libslic3r/PrintConfig.cpp:1552 msgid "" "Default base angle for infill orientation. Cross-hatching will be applied to " "this. Bridges will be infilled using the best direction Slic3r can detect, " "so this setting does not affect them." msgstr "" "填充方向的默认基本角度。交叉阴影将应用于此。网桥将使用 Slic3r 可以检测到的最" "佳方向填充，因此此设置不会影响它们。" #: src/libslic3r/PrintConfig.cpp:1577 msgid "Fill density" msgstr "填充密度" #: src/libslic3r/PrintConfig.cpp:1579 #, possible-c-format msgid "Density of internal infill, expressed in the range 0% - 100%." msgstr "内部填充的密度，表示在0%- 100%的范围内。" #: src/libslic3r/PrintConfig.cpp:1613 msgid "Fill pattern" msgstr "填充图案" #: src/libslic3r/PrintConfig.cpp:1615 msgid "Fill pattern for general low-density infill." msgstr "用于一般低密度填充的填充模式。" #: src/libslic3r/PrintConfig.cpp:1636 msgid "Grid" msgstr "网格" #: src/libslic3r/PrintConfig.cpp:1637 msgid "Triangles" msgstr "三角形" #: src/libslic3r/PrintConfig.cpp:1638 msgid "Stars" msgstr "星形" #: src/libslic3r/PrintConfig.cpp:1639 msgid "Cubic" msgstr "立方体" #: src/libslic3r/PrintConfig.cpp:1640 msgid "Line" msgstr "线" #: src/libslic3r/PrintConfig.cpp:1642 src/libslic3r/PrintConfig.cpp:3749 msgid "Honeycomb" msgstr "蜂窝" #: src/libslic3r/PrintConfig.cpp:1643 msgid "3D Honeycomb" msgstr "3D 蜂窝" #: src/libslic3r/PrintConfig.cpp:1644 msgid "Gyroid" msgstr "螺旋形" #: src/libslic3r/PrintConfig.cpp:1664 src/libslic3r/PrintConfig.cpp:1676 #: src/libslic3r/PrintConfig.cpp:1713 src/libslic3r/PrintConfig.cpp:1725 #: src/libslic3r/PrintConfig.cpp:1736 src/libslic3r/PrintConfig.cpp:1753 #: src/libslic3r/PrintConfig.cpp:1809 msgid "First layer" msgstr "第一层" #: src/libslic3r/PrintConfig.cpp:1728 msgid "" "Heated build plate temperature for the first layer. Set this to zero to " "disable bed temperature control commands in the output." msgstr "第一层加热构建板温度。将此设置为零以禁用输出中的床温控制命令。" #: src/libslic3r/PrintConfig.cpp:1874 msgid "Verbose G-code" msgstr "详细 G 代码" #: src/libslic3r/PrintConfig.cpp:1876 msgid "" "Enable this to get a commented G-code file, with each line explained by a " "descriptive text. If you print from SD card, the additional weight of the " "file could make your firmware slow down." msgstr "" "启用此选项可获取注释的 G 代码文件，每行都由描述性文本解释。如果从 SD 卡打印，" "文件的额外权重可能会降低固件速度。" #: src/libslic3r/PrintConfig.cpp:1883 msgid "G-code flavor" msgstr "G 代码风格" #: src/libslic3r/PrintConfig.cpp:1914 msgid "No extrusion" msgstr "无挤出" #: src/libslic3r/PrintConfig.cpp:1919 msgid "Label objects" msgstr "标记对象" #: src/libslic3r/PrintConfig.cpp:1921 msgid "" "Enable this to add comments into the G-Code labeling print moves with what " "object they belong to, which is useful for the Octoprint CancelObject " "plugin. This settings is NOT compatible with Single Extruder Multi Material " "setup and Wipe into Object / Wipe into Infill." msgstr "" "启用此功能,将注释添加到 G 代码标签打印移动与它们所属的对象,这对于 Octoprint " "的 CancelObject 插件很有用。此设置与单挤出机多材质设置和擦除到对象/擦除填充不" "兼容。" #: src/libslic3r/PrintConfig.cpp:1943 msgid "High extruder current on filament swap" msgstr "耗材丝切换时的高挤出机电流" #: src/libslic3r/PrintConfig.cpp:1945 msgid "" "It may be beneficial to increase the extruder motor current during the " "filament exchange sequence to allow for rapid ramming feed rates and to " "overcome resistance when loading a filament with an ugly shaped tip." msgstr "" "在耗材丝切换序列中增加挤出机电机电流可能是有益的, 这样可以快速冲击进料速度, " "并在用不良形状的尖端加载耗材丝时克服阻力。" #: src/libslic3r/PrintConfig.cpp:1964 msgid "Combine infill every" msgstr "将填充每个" #: src/libslic3r/PrintConfig.cpp:1966 msgid "" "This feature allows to combine infill and speed up your print by extruding " "thicker infill layers while preserving thin perimeters, thus accuracy." msgstr "" "此功能允许通过挤出较厚的填充层来组合填充并加快打印速度，同时保持薄轮廓，从而" "保持精度。" #: src/libslic3r/PrintConfig.cpp:1969 msgid "Combine infill every n layers" msgstr "混合填充每 n 个层" #: src/libslic3r/PrintConfig.cpp:2124 msgid "Infill extruder" msgstr "填充挤出机" #: src/libslic3r/PrintConfig.cpp:2126 msgid "The extruder to use when printing infill." msgstr "打印填充时要使用的挤出机。" #: src/libslic3r/PrintConfig.cpp:2162 msgid "Infill before perimeters" msgstr "在填充前先打印轮廓" #: src/libslic3r/PrintConfig.cpp:2164 msgid "" "This option will switch the print order of perimeters and infill, making the " "latter first." msgstr "此选项将切换轮廓和填充的打印顺序，使后者首先进行。" #: src/libslic3r/PrintConfig.cpp:2169 msgid "Only infill where needed" msgstr "仅在需要时填充" #: src/libslic3r/PrintConfig.cpp:2171 msgid "" "This option will limit infill to the areas actually needed for supporting " "ceilings (it will act as internal support material). If enabled, slows down " "the G-code generation due to the multiple checks involved." msgstr "" "此选项将填充限制为支撑顶部的实际需要区域（它将作为内部支撑材料）。如果启用，" "由于涉及多个检查，将减慢 G 代码的生成速度。" #: src/libslic3r/PrintConfig.cpp:2178 msgid "Infill/perimeters overlap" msgstr "填充/轮廓重叠" #: src/libslic3r/PrintConfig.cpp:2180 msgid "" "This setting applies an additional overlap between infill and perimeters for " "better bonding. Theoretically this shouldn't be needed, but backlash might " "cause gaps. If expressed as percentage (example: 15%) it is calculated over " "perimeter extrusion width." msgstr "" "此设置应用填充和轮廓之间的额外重叠，以便更好地粘合。从理论上讲，这不应该是需" "要的，但反弹可能会导致差距。如果以百分比表示（例如：15%）它是在轮廓挤出宽度上" "计算的。" #: src/libslic3r/PrintConfig.cpp:2192 msgid "Speed for printing the internal fill. Set to zero for auto." msgstr "打印内部填充的速度。零为自动设置。" #: src/libslic3r/PrintConfig.cpp:2200 msgid "Inherits profile" msgstr "继承配置文件" #: src/libslic3r/PrintConfig.cpp:2201 msgid "Name of the profile, from which this profile inherits." msgstr "此配置文件从中继承的配置文件的名称。" #: src/libslic3r/PrintConfig.cpp:2214 msgid "Interface shells" msgstr "接触面外壳" #: src/libslic3r/PrintConfig.cpp:2215 msgid "" "Force the generation of solid shells between adjacent materials/volumes. " "Useful for multi-extruder prints with translucent materials or manual " "soluble support material." msgstr "" "强制在相邻材料/体积之间生成固体壳。适用于具有半透明材料或手动可溶性支撑材料的" "多挤出机打印。" #: src/libslic3r/PrintConfig.cpp:2282 src/libslic3r/PrintConfig.cpp:2295 msgid "After layer change G-code" msgstr "图层更改 G 代码后" #: src/libslic3r/PrintConfig.cpp:2284 msgid "" "This custom code is inserted at every layer change, right after the Z move " "and before the extruder moves to the first layer point. Note that you can " "use placeholder variables for all Slic3r settings as well as [layer_num] and " "[layer_z]." msgstr "" "此自定义代码在每次图层更改时插入，即 Z 移动之后和挤出机移动到第一个图层点之" "前。请注意，您可以将占位符变量用于所有 Slic3r 设置以及 [layer_num] 和 " "[layer_z]。" #: src/libslic3r/PrintConfig.cpp:2316 msgid "Supports remaining times" msgstr "支撑剩余时间" #: src/libslic3r/PrintConfig.cpp:2318 msgid "" "Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute " "intervals into the G-code to let the firmware show accurate remaining time. " "As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 " "firmware supports M73 Qxx Sxx for the silent mode." msgstr "" "以1分钟的间隔发出M73 P[percent printed] R[remaining time in minutes] 进入 G-" "code , 让固件显示准确的剩余时间。到目前为止, 只有 Prusa i3 MK3 固件识别 M73。" "此外, i3 MK3 固件支持 M73 Qxx Sxx 的静音模式。" #: src/libslic3r/PrintConfig.cpp:2326 msgid "Supports stealth mode" msgstr "支持隐身模式" #: src/libslic3r/PrintConfig.cpp:2328 msgid "The firmware supports stealth mode" msgstr "固件支持隐身模式" #: src/libslic3r/PrintConfig.cpp:2399 msgid "Maximum feedrate X" msgstr "最大进给率 X" #: src/libslic3r/PrintConfig.cpp:2400 msgid "Maximum feedrate Y" msgstr "最大进给率 Y" #: src/libslic3r/PrintConfig.cpp:2401 msgid "Maximum feedrate Z" msgstr "最大进给率 Z" #: src/libslic3r/PrintConfig.cpp:2402 msgid "Maximum feedrate E" msgstr "最大进给率 E" #: src/libslic3r/PrintConfig.cpp:2405 msgid "Maximum feedrate of the X axis" msgstr "X 轴的最大进给率" #: src/libslic3r/PrintConfig.cpp:2406 msgid "Maximum feedrate of the Y axis" msgstr "Y 轴的最大进给率" #: src/libslic3r/PrintConfig.cpp:2407 msgid "Maximum feedrate of the Z axis" msgstr "Z 轴的最大进给率" #: src/libslic3r/PrintConfig.cpp:2408 msgid "Maximum feedrate of the E axis" msgstr "E 轴的最大进给率" #: src/libslic3r/PrintConfig.cpp:2416 msgid "Maximum acceleration X" msgstr "最大加速度 X" #: src/libslic3r/PrintConfig.cpp:2417 msgid "Maximum acceleration Y" msgstr "最大加速度 Y" #: src/libslic3r/PrintConfig.cpp:2418 msgid "Maximum acceleration Z" msgstr "最大加速度 Z" #: src/libslic3r/PrintConfig.cpp:2419 msgid "Maximum acceleration E" msgstr "最大加速度 E" #: src/libslic3r/PrintConfig.cpp:2422 msgid "Maximum acceleration of the X axis" msgstr "X 轴的最大加速度" #: src/libslic3r/PrintConfig.cpp:2423 msgid "Maximum acceleration of the Y axis" msgstr "Y 轴的最大加速度" #: src/libslic3r/PrintConfig.cpp:2424 msgid "Maximum acceleration of the Z axis" msgstr "Z 轴的最大加速度" #: src/libslic3r/PrintConfig.cpp:2425 msgid "Maximum acceleration of the E axis" msgstr "E 轴的最大加速度" #: src/libslic3r/PrintConfig.cpp:2426 src/libslic3r/PrintConfig.cpp:2475 #: src/libslic3r/PrintConfig.cpp:2485 src/libslic3r/PrintConfig.cpp:2495 msgid "mm/s²" msgstr "mm/s²" #: src/libslic3r/PrintConfig.cpp:2433 msgid "Maximum jerk X" msgstr "最大抖动 X" #: src/libslic3r/PrintConfig.cpp:2434 msgid "Maximum jerk Y" msgstr "最大抖动 Y" #: src/libslic3r/PrintConfig.cpp:2435 msgid "Maximum jerk Z" msgstr "最大抖动 Z" #: src/libslic3r/PrintConfig.cpp:2436 msgid "Maximum jerk E" msgstr "最大抖动 E" #: src/libslic3r/PrintConfig.cpp:2439 msgid "Maximum jerk of the X axis" msgstr "X 轴的最大抖动" #: src/libslic3r/PrintConfig.cpp:2440 msgid "Maximum jerk of the Y axis" msgstr "Y 轴的最大抖动" #: src/libslic3r/PrintConfig.cpp:2441 msgid "Maximum jerk of the Z axis" msgstr "Z 轴的最大抖动" #: src/libslic3r/PrintConfig.cpp:2442 msgid "Maximum jerk of the E axis" msgstr "E 轴的最大抖动" #: src/libslic3r/PrintConfig.cpp:2452 msgid "Minimum feedrate when extruding" msgstr "挤出时的最小进给率" #: src/libslic3r/PrintConfig.cpp:2454 msgid "Minimum feedrate when extruding (M205 S)" msgstr "挤出时的最小进给率 (M205 S)" #: src/libslic3r/PrintConfig.cpp:2462 msgid "Minimum travel feedrate" msgstr "最小移动进给率" #: src/libslic3r/PrintConfig.cpp:2464 msgid "Minimum travel feedrate (M205 T)" msgstr "最小移动进给率 (M205 T)" #: src/libslic3r/PrintConfig.cpp:2472 msgid "Maximum acceleration when extruding" msgstr "挤出时的最大加速度" #: src/libslic3r/PrintConfig.cpp:2482 msgid "Maximum acceleration when retracting" msgstr "回抽时的最大加速度" #: src/libslic3r/PrintConfig.cpp:2501 src/libslic3r/PrintConfig.cpp:2512 msgid "Max" msgstr "最大" #: src/libslic3r/PrintConfig.cpp:2515 #, possible-c-format msgid "" "This is the highest printable layer height for this extruder, used to cap " "the variable layer height and support layer height. Maximum recommended " "layer height is 75% of the extrusion width to achieve reasonable inter-layer " "adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter." msgstr "" "这是此挤出机的最高可打印层高度，用于盖住可变图层高度和支撑层高度。建议的最大" "层高度为挤出宽度的 75%，以实现合理的层间粘附。如果设置为 0，则层高度限制为喷" "嘴直径的 75%。" #: src/libslic3r/PrintConfig.cpp:2525 msgid "Max print speed" msgstr "最大打印速度" #: src/libslic3r/PrintConfig.cpp:2527 msgid "" "When setting other speed settings to 0 Slic3r will autocalculate the optimal " "speed in order to keep constant extruder pressure. This experimental setting " "is used to set the highest print speed you want to allow." msgstr "" "将其他速度设置设置为 0 时，Slic3r将自动计算最佳速度，以保持恒定的挤出压力。此" "实验设置用于设置您希望允许的最高打印速度。" #: src/libslic3r/PrintConfig.cpp:2548 msgid "" "This experimental setting is used to set the maximum volumetric speed your " "extruder supports." msgstr "此实验设置用于设置挤出机支持的最大体积速度。" #: src/libslic3r/PrintConfig.cpp:2557 msgid "Max volumetric slope positive" msgstr "最大流量增加率" #: src/libslic3r/PrintConfig.cpp:2558 src/libslic3r/PrintConfig.cpp:2570 msgid "" "This experimental setting is used to limit the speed of change in extrusion " "rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate " "of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/" "s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds." msgstr "" "该实验设置用于限制挤出速率的变化速度。值为 1.8 mm3/s2 可确保从 1.8 mm3/" "s（0.45mm 挤出宽度、0.2mm 挤出高度、进给率 20 mm/s）的挤出速率更改为 5.4 mm3/" "s（进料速率 60 mm/s）至少需要 2 秒。" #: src/libslic3r/PrintConfig.cpp:2562 src/libslic3r/PrintConfig.cpp:2574 msgid "mm³/s²" msgstr "mm³/s²" #: src/libslic3r/PrintConfig.cpp:2569 msgid "Max volumetric slope negative" msgstr "最大流量减少率" #: src/libslic3r/PrintConfig.cpp:2601 msgid "Min" msgstr "最小" #: src/libslic3r/PrintConfig.cpp:2604 msgid "" "This is the lowest printable layer height for this extruder and limits the " "resolution for variable layer height. Typical values are between 0.05 mm and " "0.1 mm." msgstr "" "这是此挤出机的最低可打印图层高度，并限制了可变图层高度的分辨率。典型值介于 " "0.05 mm 和 0.1 mm 之间。" #: src/libslic3r/PrintConfig.cpp:2634 msgid "Min print speed" msgstr "最小打印速度" #: src/libslic3r/PrintConfig.cpp:2643 msgid "Minimal filament extrusion length" msgstr "最小耗材丝挤出长度" #: src/libslic3r/PrintConfig.cpp:2645 msgid "" "Generate no less than the number of skirt loops required to consume the " "specified amount of filament on the bottom layer. For multi-extruder " "machines, this minimum applies to each extruder." msgstr "" "生成不低于在底层消耗指定数量的耗材丝所需的裙圈数。对于多挤出机,此最小值适用于" "每个挤出机。" #: src/libslic3r/PrintConfig.cpp:2654 msgid "Configuration notes" msgstr "配置说明" #: src/libslic3r/PrintConfig.cpp:2656 msgid "" "You can put here your personal notes. This text will be added to the G-code " "header comments." msgstr "你可以把个人笔记放在这里。此文本将添加到 G 代码标题注释中。" #: src/libslic3r/PrintConfig.cpp:2667 msgid "" "This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)" msgstr "这是挤出机喷嘴的直径（例如：0.5、0.35 等）" #: src/libslic3r/PrintConfig.cpp:2673 msgid "Host Type" msgstr "主机类型" #: src/libslic3r/PrintConfig.cpp:2675 msgid "" "Slic3r can upload G-code files to a printer host. This field must contain " "the kind of the host." msgstr "Slic3r 可以将 G-code 文件上传到打印机主机。此字段必须包含主机的类型。" #: src/libslic3r/PrintConfig.cpp:2709 msgid "" "Slic3r can upload G-code files to a printer host. This field should contain " "the hostname, IP address or URL of the printer host instance." msgstr "" "Slic3r 可以将 G-code 文件上传到打印机主机。此字段应包含打印机主机实例的主机" "名, IP 地址或 URL。" #: src/libslic3r/PrintConfig.cpp:2715 msgid "Only retract when crossing perimeters" msgstr "仅在跨越轮廓时回抽" #: src/libslic3r/PrintConfig.cpp:2717 msgid "" "Disables retraction when the travel path does not exceed the upper layer's " "perimeters (and thus any ooze will be probably invisible)." msgstr "当打印路径不超出前一层的轮廓时（此时任何渗出物不可见），禁用回抽。" #: src/libslic3r/PrintConfig.cpp:2723 src/libslic3r/PrintConfig.cpp:4081 msgid "Enable" msgstr "启用" #: src/libslic3r/PrintConfig.cpp:2725 msgid "" "This option will drop the temperature of the inactive extruders to prevent " "oozing. It will enable a tall skirt automatically and move extruders outside " "such skirt when changing temperatures." msgstr "" "此选项将降低不活动挤出机的温度, 以防止渗出。它将自动启用一条高大的裙边, 并在" "温度变化时将挤出机移到这种裙边之外。" #: src/libslic3r/PrintConfig.cpp:2732 msgid "Output filename format" msgstr "输出文件名格式" #: src/libslic3r/PrintConfig.cpp:2734 msgid "" "You can use all configuration options as variables inside this template. For " "example: [layer_height], [fill_density] etc. You can also use [timestamp], " "[year], [month], [day], [hour], [minute], [second], [version], " "[input_filename], [input_filename_base]." msgstr "" "您可以将所有配置选项用作此模板中的变量。例如： [layer_height], " "[fill_density] 密度等。您还可以使用 [timestamp], [year], [month], [day], " "[hour], [minute], [second], [version], [input_filename], " "[input_filename_base] 。" #: src/libslic3r/PrintConfig.cpp:2821 msgid "Filament parking position" msgstr "耗材丝停车位" #: src/libslic3r/PrintConfig.cpp:2822 msgid "" "Distance of the extruder tip from the position where the filament is parked " "when unloaded. This should match the value in printer firmware. " msgstr "卸载时，挤出机尖端与耗材丝停放位置的距离。这应该与打印机固件中的值匹配。. " #: src/libslic3r/PrintConfig.cpp:2830 msgid "Extra loading distance" msgstr "额外装载距离" #: src/libslic3r/PrintConfig.cpp:2831 msgid "" "When set to zero, the distance the filament is moved from parking position " "during load is exactly the same as it was moved back during unload. When " "positive, it is loaded further, if negative, the loading move is shorter " "than unloading. " msgstr "当设置为零时，耗材丝在负载期间与停车位置移动的距离与卸载期间移回的距离完全相同。当为正时，它进一步加载，如果为负，加载移动比卸载短。. " #: src/libslic3r/PrintConfig.cpp:2839 src/libslic3r/PrintConfig.cpp:2859 #: src/libslic3r/PrintConfig.cpp:2875 src/libslic3r/PrintConfig.cpp:2900 msgid "Perimeters" msgstr "轮廓" #: src/libslic3r/PrintConfig.cpp:2850 msgid "Perimeter extruder" msgstr "轮廓挤出机" #: src/libslic3r/PrintConfig.cpp:2852 msgid "" "The extruder to use when printing perimeters and brim. First extruder is 1." msgstr "打印轮廓和外围裙边时使用的挤出机。第一个挤出机为 1。" #: src/libslic3r/PrintConfig.cpp:2892 msgid "" "Speed for perimeters (contours, aka vertical shells). Set to zero for auto." msgstr "边界的速度 (等高线, 也称为垂直壳)。自动设置为零。" #: src/libslic3r/PrintConfig.cpp:2903 msgid "" "This option sets the number of perimeters to generate for each layer. Note " "that Slic3r may increase this number automatically when it detects sloping " "surfaces which benefit from a higher number of perimeters if the Extra " "Perimeters option is enabled." msgstr "" "此选项设置要为每个图层生成的轮廓数。请注意，Slic3r 在检测到倾斜曲面时可能会自" "动增加此数字，如果启用了\"额外轮廓\"选项，则这些坡度曲面受益于较高的轮廓数。" #: src/libslic3r/PrintConfig.cpp:2907 msgid "(minimum)." msgstr "（最小）." #: src/libslic3r/PrintConfig.cpp:2914 msgid "Post-processing scripts" msgstr "后处理脚本" #: src/libslic3r/PrintConfig.cpp:2916 msgid "" "If you want to process the output G-code through custom scripts, just list " "their absolute paths here. Separate multiple scripts with a semicolon. " "Scripts will be passed the absolute path to the G-code file as the first " "argument, and they can access the Slic3r config settings by reading " "environment variables." msgstr "" "如果要通过自定义脚本处理输出 G-code , 只需在此处列出它们的绝对路径即可。用分" "号分隔多个脚本。脚本将作为第一个参数传递到 G-code 文件的绝对路径, 并且它们可" "以通过读取环境变量访问 Slic3r 配置设置。" #: src/libslic3r/PrintConfig.cpp:2928 msgid "Printer type" msgstr "打印机类型" #: src/libslic3r/PrintConfig.cpp:2929 msgid "Type of the printer." msgstr "打印机的类型." #: src/libslic3r/PrintConfig.cpp:2934 msgid "Printer notes" msgstr "打印机备注" #: src/libslic3r/PrintConfig.cpp:2936 msgid "You can put your notes regarding the printer here." msgstr "您可以在此处放置有关打印机的备注." #: src/libslic3r/PrintConfig.cpp:2944 msgid "Printer vendor" msgstr "打印机供应商" #: src/libslic3r/PrintConfig.cpp:2945 msgid "Name of the printer vendor." msgstr "打印机供应商的名称." #: src/libslic3r/PrintConfig.cpp:2950 msgid "Printer variant" msgstr "打印机版本" #: src/libslic3r/PrintConfig.cpp:2951 msgid "" "Name of the printer variant. For example, the printer variants may be " "differentiated by a nozzle diameter." msgstr "打印机变体的版本。例如, 打印机版本可以通过喷嘴直径进行区分。" #: src/libslic3r/PrintConfig.cpp:2975 msgid "Raft layers" msgstr "筏层" #: src/libslic3r/PrintConfig.cpp:2977 msgid "" "The object will be raised by this number of layers, and support material " "will be generated under it." msgstr "对象将相对此层数抬高，并在其下生成支撑材料。" #: src/libslic3r/PrintConfig.cpp:2985 msgid "Resolution" msgstr "分辨率" #: src/libslic3r/PrintConfig.cpp:2999 msgid "Minimum travel after retraction" msgstr "回抽最小行程" #: src/libslic3r/PrintConfig.cpp:3001 msgid "" "Retraction is not triggered when travel moves are shorter than this length." msgstr "当打印移动短于此长度时，不会触发回抽。" #: src/libslic3r/PrintConfig.cpp:3008 msgid "Retract amount before wipe" msgstr "擦拭前的回抽量" #: src/libslic3r/PrintConfig.cpp:3010 msgid "" "With bowden extruders, it may be wise to do some amount of quick retract " "before doing the wipe movement." msgstr "对于远程挤出机, 在做擦拭动作之前, 做一些快速的收回可能是明智的。" #: src/libslic3r/PrintConfig.cpp:3017 msgid "Retract on layer change" msgstr "在图层更改时回抽" #: src/libslic3r/PrintConfig.cpp:3024 src/libslic3r/PrintConfig.cpp:3041 msgid "Length" msgstr "长度" #: src/libslic3r/PrintConfig.cpp:3025 msgid "Retraction Length" msgstr "回抽长度" #: src/libslic3r/PrintConfig.cpp:3027 msgid "" "When retraction is triggered, filament is pulled back by the specified " "amount (the length is measured on raw filament, before it enters the " "extruder)." msgstr "" "触发回抽时，耗材丝按指定量拉回（长度在进入挤出机之前在原始耗材丝上测量）。" #: src/libslic3r/PrintConfig.cpp:3029 src/libslic3r/PrintConfig.cpp:3046 msgid "mm (zero to disable)" msgstr "mm (0禁用)" #: src/libslic3r/PrintConfig.cpp:3034 msgid "Retraction length" msgstr "回抽长度" #: src/libslic3r/PrintConfig.cpp:3042 msgid "Retraction Length (Toolchange)" msgstr "回抽长度 (工具更换)" #: src/libslic3r/PrintConfig.cpp:3043 msgid "" "When retraction is triggered before changing tool, filament is pulled back " "by the specified amount (the length is measured on raw filament, before it " "enters the extruder)." msgstr "" "在更换热头之前触发回抽时，耗材丝按指定量拉回（长度在进入挤出机之前在原始耗材" "丝上测量）。" #: src/libslic3r/PrintConfig.cpp:3052 msgid "Lift Z" msgstr "提升 Z" #: src/libslic3r/PrintConfig.cpp:3054 msgid "" "If you set this to a positive value, Z is quickly raised every time a " "retraction is triggered. When using multiple extruders, only the setting for " "the first extruder will be considered." msgstr "" "如果将此值设置为正值，则每次触发回抽时都会快速引发 Z。使用多个挤出机时，仅考" "虑第一个挤出机的设置。" #: src/libslic3r/PrintConfig.cpp:3061 msgid "Above Z" msgstr "Z 高于" #: src/libslic3r/PrintConfig.cpp:3062 msgid "Only lift Z above" msgstr "仅提升 Z 高于" #: src/libslic3r/PrintConfig.cpp:3064 msgid "" "If you set this to a positive value, Z lift will only take place above the " "specified absolute Z. You can tune this setting for skipping lift on the " "first layers." msgstr "" "如果将此值设置为正值，则 Z 提升将仅发生在指定的绝对 Z 上方。您可以调整此设置" "以跳过第一个图层上的提升。" #: src/libslic3r/PrintConfig.cpp:3071 msgid "Below Z" msgstr "Z 低于" #: src/libslic3r/PrintConfig.cpp:3072 msgid "Only lift Z below" msgstr "仅提升 Z 低于" #: src/libslic3r/PrintConfig.cpp:3074 msgid "" "If you set this to a positive value, Z lift will only take place below the " "specified absolute Z. You can tune this setting for limiting lift to the " "first layers." msgstr "" "如果将此值设置为正值，则 Z 提升将仅发生在指定的绝对 Z 以下。您可以调整此设" "置，将提升限制为第一个图层。" #: src/libslic3r/PrintConfig.cpp:3104 src/libslic3r/PrintConfig.cpp:3112 msgid "Extra length on restart" msgstr "重新启动时的额外长度" #: src/libslic3r/PrintConfig.cpp:3105 msgid "" "When the retraction is compensated after the travel move, the extruder will " "push this additional amount of filament. This setting is rarely needed." msgstr "" "当回抽在打印后得到补偿时，挤出机将推进这个额外的耗材丝量。很少需要此设置。" #: src/libslic3r/PrintConfig.cpp:3114 msgid "" "When the retraction is compensated after changing tool, the extruder will " "push this additional amount of filament." msgstr "当更换热头后补偿回抽时，挤出机将推进这额外的耗材丝量。" #: src/libslic3r/PrintConfig.cpp:3121 src/libslic3r/PrintConfig.cpp:3122 msgid "Retraction Speed" msgstr "回抽速度" #: src/libslic3r/PrintConfig.cpp:3124 msgid "The speed for retractions (it only applies to the extruder motor)." msgstr "回抽速度 (仅适用于挤出机电机)." #: src/libslic3r/PrintConfig.cpp:3130 src/libslic3r/PrintConfig.cpp:3131 msgid "Deretraction Speed" msgstr "减速速度" #: src/libslic3r/PrintConfig.cpp:3133 msgid "" "The speed for loading of a filament into extruder after retraction (it only " "applies to the extruder motor). If left to zero, the retraction speed is " "used." msgstr "" "收回后将耗材丝装入挤出机的速度 (仅适用于挤出机电机)。如果保持为零, 则使用回抽" "速度。" #: src/libslic3r/PrintConfig.cpp:3150 msgid "Random" msgstr "随机" #: src/libslic3r/PrintConfig.cpp:3151 msgid "Aligned" msgstr "对齐" #: src/libslic3r/PrintConfig.cpp:3179 msgid "Direction" msgstr "方向" #: src/libslic3r/PrintConfig.cpp:3181 msgid "Preferred direction of the seam" msgstr "接缝的首选方向" #: src/libslic3r/PrintConfig.cpp:3182 msgid "Seam preferred direction" msgstr "接缝首选方向" #: src/libslic3r/PrintConfig.cpp:3190 msgid "Jitter" msgstr "抖动" #: src/libslic3r/PrintConfig.cpp:3192 msgid "Seam preferred direction jitter" msgstr "接缝首选方向抖动" #: src/libslic3r/PrintConfig.cpp:3193 msgid "Preferred direction of the seam - jitter" msgstr "接缝的首选方向 - 抖动" #: src/libslic3r/PrintConfig.cpp:3201 msgid "Distance from object" msgstr "与对象的距离" #: src/libslic3r/PrintConfig.cpp:3203 msgid "" "Distance between skirt and object(s). Set this to zero to attach the skirt " "to the object(s) and get a brim for better adhesion." msgstr "" "裙边和物体之间的距离。将此设置为零以将裙边附加到对象，并获得边缘以获得更好的" "附着力。" #: src/libslic3r/PrintConfig.cpp:3211 msgid "Skirt height" msgstr "裙边高度" #: src/libslic3r/PrintConfig.cpp:3213 msgid "" "Height of skirt expressed in layers. Set this to a tall value to use skirt " "as a shield against drafts." msgstr "裙边的高度以层表示。设置一个高值，以使用裙边作为防翘边的保护。" #: src/libslic3r/PrintConfig.cpp:3238 msgid "Loops (minimum)" msgstr "圈数（最小值）" #: src/libslic3r/PrintConfig.cpp:3239 msgid "Skirt Loops" msgstr "裙边圈数" #: src/libslic3r/PrintConfig.cpp:3241 msgid "" "Number of loops for the skirt. If the Minimum Extrusion Length option is " "set, the number of loops might be greater than the one configured here. Set " "this to zero to disable skirt completely." msgstr "" "裙边的循环数。如果设置了\"最小挤出长度\"选项，则循环数可能大于此处配置的循环" "数。设置为零以完全禁用裙边。" #: src/libslic3r/PrintConfig.cpp:3249 msgid "Slow down if layer print time is below" msgstr "如果图层打印时间低于" #: src/libslic3r/PrintConfig.cpp:3264 msgid "" "This separate setting will affect the speed of perimeters having radius <= " "6.5mm (usually holes). If expressed as percentage (for example: 80%) it will " "be calculated on the perimeters speed setting above. Set to zero for auto." msgstr "" "此单独设置将影响半径为 < = 6.5 mm (通常为孔) 的边界的速度。如果以百分比表示 " "(例如: 80%), 则将根据上面的边界速度设置进行计算。自动设置为零。" #: src/libslic3r/PrintConfig.cpp:3355 msgid "Solid infill threshold area" msgstr "实心填充阈值区域" #: src/libslic3r/PrintConfig.cpp:3357 msgid "" "Force solid infill for regions having a smaller area than the specified " "threshold." msgstr "对面积小于指定阈值的区域强制实心填充。" #: src/libslic3r/PrintConfig.cpp:3358 src/libslic3r/PrintConfig.cpp:4267 #: src/libslic3r/PrintConfig.cpp:4289 msgid "mm²" msgstr "mm²" #: src/libslic3r/PrintConfig.cpp:3364 msgid "Solid infill extruder" msgstr "实心填充挤出机" #: src/libslic3r/PrintConfig.cpp:3366 msgid "The extruder to use when printing solid infill." msgstr "打印实体填充时使用的挤出机。" #: src/libslic3r/PrintConfig.cpp:3372 msgid "Solid infill every" msgstr "固体填充每个" #: src/libslic3r/PrintConfig.cpp:3374 msgid "" "This feature allows to force a solid layer every given number of layers. " "Zero to disable. You can set this to any value (for example 9999); Slic3r " "will automatically choose the maximum possible number of layers to combine " "according to nozzle diameter and layer height." msgstr "" "此功能允许强制每个给定数量的图层的实心图层。要禁用的零。您可以将其设置为任何" "值（例如 9999）;Slic3r 将根据喷嘴直径和层高度自动选择要合并的最大层数。" #: src/libslic3r/PrintConfig.cpp:3427 msgid "Solid layers" msgstr "实心层" #: src/libslic3r/PrintConfig.cpp:3429 msgid "Number of solid layers to generate on top and bottom surfaces." msgstr "要在顶部和底部曲面上生成的实心图层数。" #: src/libslic3r/PrintConfig.cpp:3442 msgid "Spiral vase" msgstr "螺旋花瓶" #: src/libslic3r/PrintConfig.cpp:3452 msgid "Temperature variation" msgstr "温度变化" #: src/libslic3r/PrintConfig.cpp:3453 msgid "" "Temperature difference to be applied when an extruder is not active. Enables " "a full-height \"sacrificial\" skirt on which the nozzles are periodically " "wiped." msgstr "" "当挤出机处于非活动状态时, 要应用温差。启用全高的 \"牺牲\" 裙边, 定期擦拭喷" "嘴。" #: src/libslic3r/PrintConfig.cpp:3462 src/libslic3r/PrintConfig.cpp:3487 msgid "Start G-code" msgstr "起始 G-code" #: src/libslic3r/PrintConfig.cpp:3536 msgid "Custom G-code" msgstr "自定义 G-code" #: src/libslic3r/PrintConfig.cpp:3545 msgid "Single Extruder Multi Material" msgstr "单挤出机多材料" #: src/libslic3r/PrintConfig.cpp:3547 msgid "The printer multiplexes filaments into a single hot end." msgstr "打印机将耗材丝多路复用到一个热端。" #: src/libslic3r/PrintConfig.cpp:3552 msgid "Prime all printing extruders" msgstr "装填所有印刷挤出机" #: src/libslic3r/PrintConfig.cpp:3554 msgid "" "If enabled, all printing extruders will be primed at the front edge of the " "print bed at the start of the print." msgstr "如果启用, 所有打印挤出机都将在打印开始时在构建板的前缘进行装填。" #: src/libslic3r/PrintConfig.cpp:3568 msgid "Generate support material" msgstr "生成支撑材料" #: src/libslic3r/PrintConfig.cpp:3570 msgid "Enable support material generation." msgstr "启用支撑材料生成。" #: src/libslic3r/PrintConfig.cpp:3574 msgid "Auto generated supports" msgstr "自动生成支撑" #: src/libslic3r/PrintConfig.cpp:3576 msgid "" "If checked, supports will be generated automatically based on the overhang " "threshold value. If unchecked, supports will be generated inside the " "\"Support Enforcer\" volumes only." msgstr "" "如果选中, 将根据悬垂阈值自动生成支撑。如果未选中, 则仅在 \"支撑执行器\" 空间" "内生成支撑。" #: src/libslic3r/PrintConfig.cpp:3582 msgid "XY separation between an object and its support" msgstr "对象与其支撑之间的 XY 分离距离" #: src/libslic3r/PrintConfig.cpp:3584 msgid "" "XY separation between an object and its support. If expressed as percentage " "(for example 50%), it will be calculated over external perimeter width." msgstr "" "对象与其支撑之间的 xy 分离距离。如果表示为百分比 (例如 50%), 则将根据外部外围" "宽度计算。" #: src/libslic3r/PrintConfig.cpp:3594 msgid "Pattern angle" msgstr "模式角度" #: src/libslic3r/PrintConfig.cpp:3597 msgid "" "Use this setting to rotate the support material pattern on the horizontal " "plane." msgstr "使用此设置可旋转水平平面上的支撑材料模式。" #: src/libslic3r/PrintConfig.cpp:3607 src/libslic3r/PrintConfig.cpp:4868 msgid "" "Only create support if it lies on a build plate. Don't create support on a " "print." msgstr "仅当支撑位于构建板上时，才能创建支撑。不要在打印上创建支撑。" #: src/libslic3r/PrintConfig.cpp:3612 msgid "Type" msgstr "类型：" #: src/libslic3r/PrintConfig.cpp:3657 msgid "Enforce support for the first" msgstr "强制支撑前" #: src/libslic3r/PrintConfig.cpp:3659 msgid "" "Generate support material for the specified number of layers counting from " "bottom, regardless of whether normal support material is enabled or not and " "regardless of any angle threshold. This is useful for getting more adhesion " "of objects having a very thin or poor footprint on the build plate." msgstr "" "从底部为指定数量的图层生成支撑材料,无论是否启用了普通支撑材料,也无论角度阈值" "如何。这对于在构建板上具有非常薄或差的封装的物体的粘附性非常有用。" #: src/libslic3r/PrintConfig.cpp:3664 msgid "Enforce support for the first n layers" msgstr "强制支撑前 n 层" #: src/libslic3r/PrintConfig.cpp:3670 msgid "Support material/raft/skirt extruder" msgstr "支撑材料/筏/裙边 挤出机" #: src/libslic3r/PrintConfig.cpp:3672 msgid "" "The extruder to use when printing support material, raft and skirt (1+, 0 to " "use the current extruder to minimize tool changes)." msgstr "" "打印支撑材料、基座和裙边时使用的挤出机 (1+, 0 用于使用当前挤出机以最大限度地" "减少工具切换)." #: src/libslic3r/PrintConfig.cpp:3693 msgid "Interface loops" msgstr "接触面圈数" #: src/libslic3r/PrintConfig.cpp:3695 msgid "" "Cover the top contact layer of the supports with loops. Disabled by default." msgstr "用循环盖住支架的顶层接触层。默认情况下禁用。" #: src/libslic3r/PrintConfig.cpp:3700 msgid "Support material/raft interface extruder" msgstr "支撑材料/筏 接触面挤出机" #: src/libslic3r/PrintConfig.cpp:3702 msgid "" "The extruder to use when printing support material interface (1+, 0 to use " "the current extruder to minimize tool changes). This affects raft too." msgstr "" "打印支撑材料界面时要使用的挤出机 (1+, 0 用于使用当前挤出机以最大限度地减少工" "具切换)。这也会影响基座." #: src/libslic3r/PrintConfig.cpp:3709 msgid "Interface layers" msgstr "接触面层" #: src/libslic3r/PrintConfig.cpp:3711 msgid "" "Number of interface layers to insert between the object(s) and support " "material." msgstr "要在对象和支撑材料之间插入的接触面层数。" #: src/libslic3r/PrintConfig.cpp:3718 msgid "Interface pattern spacing" msgstr "接触面模式间距" #: src/libslic3r/PrintConfig.cpp:3720 msgid "Spacing between interface lines. Set zero to get a solid interface." msgstr "接触面行之间的间距。设置为零以获得实心接触面。" #: src/libslic3r/PrintConfig.cpp:3730 msgid "" "Speed for printing support material interface layers. If expressed as " "percentage (for example 50%) it will be calculated over support material " "speed." msgstr "" "打印支撑材料接触面图层的速度。如果以百分比表示（例如 50%）它将在支撑材料速度" "上计算。" #: src/libslic3r/PrintConfig.cpp:3742 msgid "Pattern used to generate support material." msgstr "用于生成支撑材料的模式。" #: src/libslic3r/PrintConfig.cpp:3748 msgid "Rectilinear grid" msgstr "直线网格" #: src/libslic3r/PrintConfig.cpp:3777 msgid "Pattern spacing" msgstr "模式间距" #: src/libslic3r/PrintConfig.cpp:3779 msgid "Spacing between support material lines." msgstr "支撑材料线之间的间距。" #: src/libslic3r/PrintConfig.cpp:3789 msgid "Speed for printing support material." msgstr "打印支撑材料的速度。" #: src/libslic3r/PrintConfig.cpp:3796 msgid "Synchronize with object layers" msgstr "与对象图层同步" #: src/libslic3r/PrintConfig.cpp:3798 msgid "" "Synchronize support layers with the object print layers. This is useful with " "multi-material printers, where the extruder switch is expensive." msgstr "" "将支撑图层与对象打印图层同步。这对于多材料打印机非常有用, 因为在这种打印机" "中, 挤出机切换非常不划算." #: src/libslic3r/PrintConfig.cpp:3804 msgid "Overhang threshold" msgstr "悬垂阈值" #: src/libslic3r/PrintConfig.cpp:3806 msgid "" "Support material will not be generated for overhangs whose slope angle (90° " "= vertical) is above the given threshold. In other words, this value " "represent the most horizontal slope (measured from the horizontal plane) " "that you can print without support material. Set to zero for automatic " "detection (recommended)." msgstr "" "对于斜率（90° = 垂直）高于给定阈值的悬伸，不会生成支撑材料。换句话说，此值表" "示无需支撑材料即可打印的最水平斜率（从水平平面测量）。设置为零以进行自动检测" "（建议）。" #: src/libslic3r/PrintConfig.cpp:3818 msgid "With sheath around the support" msgstr "用护套围绕支撑" #: src/libslic3r/PrintConfig.cpp:3820 msgid "" "Add a sheath (a single perimeter line) around the base support. This makes " "the support more reliable, but also more difficult to remove." msgstr "" "在基础支架周围添加护套 (一条外围线)。这使得支撑更可靠, 但也更难以移除。" #: src/libslic3r/PrintConfig.cpp:3891 msgid "Overlap" msgstr "交叠" #: src/libslic3r/PrintConfig.cpp:3920 msgid "Threads" msgstr "线程" #: src/libslic3r/PrintConfig.cpp:3921 msgid "" "Threads are used to parallelize long-running tasks. Optimal threads number " "is slightly above the number of available cores/processors." msgstr "" "线程用于并行化长时间运行的任务。最佳线程数略高于可用内核/处理器的数量。" #: src/libslic3r/PrintConfig.cpp:3941 msgid "Tool change G-code" msgstr "工具更改 G 代码" #: src/libslic3r/PrintConfig.cpp:3992 msgid "" "Speed for printing top solid layers (it only applies to the uppermost " "external layers and not to their internal solid layers). You may want to " "slow down this to get a nicer surface finish. This can be expressed as a " "percentage (for example: 80%) over the solid infill speed above. Set to zero " "for auto." msgstr "" "打印顶部实体图层的速度（它仅适用于最上面的外部图层，不适用于其内部实心图" "层）。您可能需要减慢速度，以获得更好的表面光洁度。这可以表示为百分比（例如：" "80%）超过上面的固体填充速度。为自动设置为零。" #: src/libslic3r/PrintConfig.cpp:4008 msgid "Number of solid layers to generate on top surfaces." msgstr "要在顶部曲面上生成的实心图层数。" #: src/libslic3r/PrintConfig.cpp:4009 msgid "Top solid layers" msgstr "顶部实心层" #: src/libslic3r/PrintConfig.cpp:4029 msgid "Speed for travel moves (jumps between distant extrusion points)." msgstr "打印移动的速度（在远处挤出点之间跳跃）。" #: src/libslic3r/PrintConfig.cpp:4037 msgid "Use firmware retraction" msgstr "使用固件回抽" #: src/libslic3r/PrintConfig.cpp:4039 msgid "" "This experimental setting uses G10 and G11 commands to have the firmware " "handle the retraction. This is only supported in recent Marlin." msgstr "" "此实验设置使用 G10 和 G11 命令让固件处理回抽。这在最近Marlin中才得到支持。" #: src/libslic3r/PrintConfig.cpp:4045 msgid "Use relative E distances" msgstr "使用相对 E 距离" #: src/libslic3r/PrintConfig.cpp:4047 msgid "" "If your firmware requires relative E values, check this, otherwise leave it " "unchecked. Most firmwares use absolute values." msgstr "" "如果您的固件需要相对的 E 值，请检查这一点，否则不要选中它。大多数固件使用绝对" "值。" #: src/libslic3r/PrintConfig.cpp:4053 msgid "Use volumetric E" msgstr "使用体积 E" #: src/libslic3r/PrintConfig.cpp:4055 msgid "" "This experimental setting uses outputs the E values in cubic millimeters " "instead of linear millimeters. If your firmware doesn't already know " "filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] " "T0' in your start G-code in order to turn volumetric mode on and use the " "filament diameter associated to the filament selected in Slic3r. This is " "only supported in recent Marlin." msgstr "" "此实验设置使用以立方mm为单位的 E 值而不是线性mm。如果您的固件不知道耗材直径，" "您可以将诸如\"M200 D[filament_diameter_0] T0\"这样的命令放入起始 G 代码中，以" "便打开体积模式并使用与 Slic3r 中选择的耗材丝相关的耗材丝直径。这在最近马林中" "才得到支持。" #: src/libslic3r/PrintConfig.cpp:4065 msgid "Enable variable layer height feature" msgstr "启用可变图层高度特征" #: src/libslic3r/PrintConfig.cpp:4067 msgid "" "Some printers or printer setups may have difficulties printing with a " "variable layer height. Enabled by default." msgstr "" "某些打印机或打印机设置在打印图层高度可变时可能遇到问题。默认情况下启用。" #: src/libslic3r/PrintConfig.cpp:4073 msgid "Wipe while retracting" msgstr "回抽时擦拭" #: src/libslic3r/PrintConfig.cpp:4075 msgid "" "This flag will move the nozzle while retracting to minimize the possible " "blob on leaky extruders." msgstr "此标志将在回抽时移动喷嘴，以尽量减少泄漏挤出器上可能出现的斑点。" #: src/libslic3r/PrintConfig.cpp:4084 msgid "" "Multi material printers may need to prime or purge extruders on tool " "changes. Extrude the excess material into the wipe tower." msgstr "" "多材料打印机可能需要对工具更换进行填充清洗或清除挤出机。将多余的材料挤出到擦" "料塔中." #: src/libslic3r/PrintConfig.cpp:4090 msgid "Purging volumes - load/unload volumes" msgstr "清除量-加载/卸载量" #: src/libslic3r/PrintConfig.cpp:4091 msgid "" "This vector saves required volumes to change from/to each tool used on the " "wipe tower. These values are used to simplify creation of the full purging " "volumes below. " msgstr "此矢量保存所需的体积，以便从/到擦料塔上使用的每个工具。这些值用于简化以下完整清除量的创建。. " #: src/libslic3r/PrintConfig.cpp:4097 msgid "Purging volumes - matrix" msgstr "清除量-矩阵" #: src/libslic3r/PrintConfig.cpp:4098 msgid "" "This matrix describes volumes (in cubic milimetres) required to purge the " "new filament on the wipe tower for any given pair of tools. " msgstr "此矩阵描述清除擦料塔上任何给定工具对的新耗材丝所需的体积（以立方米为单位）。. " #: src/libslic3r/PrintConfig.cpp:4164 msgid "X coordinate of the left front corner of a wipe tower" msgstr "擦料塔左前角的 X 坐标" #: src/libslic3r/PrintConfig.cpp:4172 msgid "Y coordinate of the left front corner of a wipe tower" msgstr "擦料塔左前角的 Y 坐标" #: src/libslic3r/PrintConfig.cpp:4180 msgid "Width of a wipe tower" msgstr "擦料塔的宽度" #: src/libslic3r/PrintConfig.cpp:4186 msgid "Wipe tower rotation angle" msgstr "擦料塔旋转角度" #: src/libslic3r/PrintConfig.cpp:4187 msgid "Wipe tower rotation angle with respect to x-axis." msgstr "相对于 x 轴擦料塔旋转角度。" #: src/libslic3r/PrintConfig.cpp:4194 msgid "Wipe into this object's infill" msgstr "擦入此物体的填充" #: src/libslic3r/PrintConfig.cpp:4195 msgid "" "Purging after toolchange will done inside this object's infills. This lowers " "the amount of waste but may result in longer print time due to additional " "travel moves." msgstr "" "工具更改后的热头清除将在此对象的填充内完成。这降低了浪费量, 但可能会导致更长" "的打印时间, 由于额外的移动。" #: src/libslic3r/PrintConfig.cpp:4202 msgid "Wipe into this object" msgstr "擦除到此对象" #: src/libslic3r/PrintConfig.cpp:4203 msgid "" "Object will be used to purge the nozzle after a toolchange to save material " "that would otherwise end up in the wipe tower and decrease print time. " "Colours of the objects will be mixed as a result." msgstr "" "对象将用于在工具更改后清除喷嘴, 以节省在擦料塔中浪费的材料并减少打印时间。因" "此, 对象的颜色将混合在一起。" #: src/libslic3r/PrintConfig.cpp:4219 msgid "Maximal bridging distance" msgstr "最大桥接距离" #: src/libslic3r/PrintConfig.cpp:4220 msgid "Maximal distance between supports on sparse infill sections. " msgstr "稀疏填充部分上支撑之间的最大距离。. " #: src/libslic3r/PrintConfig.cpp:4294 msgid "Z offset" msgstr "Z 偏移" #: src/libslic3r/PrintConfig.cpp:4296 msgid "" "This value will be added (or subtracted) from all the Z coordinates in the " "output G-code. It is used to compensate for bad Z endstop position: for " "example, if your endstop zero actually leaves the nozzle 0.3mm far from the " "print bed, set this to -0.3 (or fix your endstop)." msgstr "" "此值将从输出 G 代码中的所有 Z 坐标中添加(或减去)。它用于补偿损坏的 Z 端限位器" "置：例如，如果限位器零实际离开喷嘴 0.3 mm远离构建板(打印床)，将其设置为 " "-0.3（或调整限位器）。" #: src/libslic3r/PrintConfig.cpp:4524 msgid "Display width" msgstr "显示宽度" #: src/libslic3r/PrintConfig.cpp:4525 msgid "Width of the display" msgstr "显示宽度" #: src/libslic3r/PrintConfig.cpp:4530 msgid "Display height" msgstr "显示高度" #: src/libslic3r/PrintConfig.cpp:4531 msgid "Height of the display" msgstr "显示高度" #: src/libslic3r/PrintConfig.cpp:4536 msgid "Number of pixels in" msgstr "像素点的数量" #: src/libslic3r/PrintConfig.cpp:4538 msgid "Number of pixels in X" msgstr "X 中的像素数" #: src/libslic3r/PrintConfig.cpp:4544 msgid "Number of pixels in Y" msgstr "Y 中的像素数" #: src/libslic3r/PrintConfig.cpp:4549 msgid "Display horizontal mirroring" msgstr "显示水平镜像" #: src/libslic3r/PrintConfig.cpp:4550 msgid "Mirror horizontally" msgstr "水平镜像" #: src/libslic3r/PrintConfig.cpp:4551 msgid "Enable horizontal mirroring of output images" msgstr "启用输出图像的水平镜像" #: src/libslic3r/PrintConfig.cpp:4556 msgid "Display vertical mirroring" msgstr "显示垂直镜像" #: src/libslic3r/PrintConfig.cpp:4557 msgid "Mirror vertically" msgstr "垂直镜像" #: src/libslic3r/PrintConfig.cpp:4558 msgid "Enable vertical mirroring of output images" msgstr "启用输出图像的垂直镜像" #: src/libslic3r/PrintConfig.cpp:4563 msgid "Display orientation" msgstr "显示方向" #: src/libslic3r/PrintConfig.cpp:4564 msgid "" "Set the actual LCD display orientation inside the SLA printer. Portrait mode " "will flip the meaning of display width and height parameters and the output " "images will be rotated by 90 degrees." msgstr "" "在 SLA 打印机内设置实际的 LCD 显示方向。人像模式将翻转显示宽度和高度参数的含" "义, 输出图像将旋转90度。" #: src/libslic3r/PrintConfig.cpp:4570 msgid "Landscape" msgstr "景观" #: src/libslic3r/PrintConfig.cpp:4571 msgid "Portrait" msgstr "肖像" #: src/libslic3r/PrintConfig.cpp:4576 msgid "Fast" msgstr "快" #: src/libslic3r/PrintConfig.cpp:4577 msgid "Fast tilt" msgstr "快速倾斜" #: src/libslic3r/PrintConfig.cpp:4578 msgid "Time of the fast tilt" msgstr "快速倾斜的时间" #: src/libslic3r/PrintConfig.cpp:4585 msgid "Slow" msgstr "慢" #: src/libslic3r/PrintConfig.cpp:4586 msgid "Slow tilt" msgstr "缓慢倾斜" #: src/libslic3r/PrintConfig.cpp:4587 msgid "Time of the slow tilt" msgstr "缓慢倾斜的时间" #: src/libslic3r/PrintConfig.cpp:4594 msgid "Area fill" msgstr "区域填充" #: src/libslic3r/PrintConfig.cpp:4595 msgid "" "The percentage of the bed area. \n" "If the print area exceeds the specified value, \n" "then a slow tilt will be used, otherwise - a fast tilt" msgstr "" "床面积的百分比。\n" "如果打印区域超过指定值，\n" "然后缓慢倾斜将被使用，否则 - 快速倾斜" #: src/libslic3r/PrintConfig.cpp:4602 src/libslic3r/PrintConfig.cpp:4603 #: src/libslic3r/PrintConfig.cpp:4604 msgid "Printer scaling correction" msgstr "打印机缩放校正" #: src/libslic3r/PrintConfig.cpp:4610 src/libslic3r/PrintConfig.cpp:4611 msgid "Printer absolute correction" msgstr "打印机绝对校正" #: src/libslic3r/PrintConfig.cpp:4612 msgid "" "Will inflate or deflate the sliced 2D polygons according to the sign of the " "correction." msgstr "将根据校正的符号放大或收缩切片的 2D 多边形。" #: src/libslic3r/PrintConfig.cpp:4627 src/libslic3r/PrintConfig.cpp:4628 msgid "Printer gamma correction" msgstr "打印机伽玛校正" #: src/libslic3r/PrintConfig.cpp:4629 msgid "" "This will apply a gamma correction to the rasterized 2D polygons. A gamma " "value of zero means thresholding with the threshold in the middle. This " "behaviour eliminates antialiasing without losing holes in polygons." msgstr "" "这将对栅格化的 2D 多边形应用伽玛校正。伽玛值为零表示在中间的阈值阈值。此行为" "消除了抗锯齿,而不会丢失多边形中的孔。" #: src/libslic3r/PrintConfig.cpp:4653 src/libslic3r/PrintConfig.cpp:4654 msgid "Initial layer height" msgstr "初始层高度" #: src/libslic3r/PrintConfig.cpp:4688 msgid "Faded layers" msgstr "褪色图层" #: src/libslic3r/PrintConfig.cpp:4689 msgid "" "Number of the layers needed for the exposure time fade from initial exposure " "time to the exposure time" msgstr "曝光时间所需的图层数从初始曝光时间到曝光时间逐渐淡入淡出" #: src/libslic3r/PrintConfig.cpp:4696 src/libslic3r/PrintConfig.cpp:4697 msgid "Minimum exposure time" msgstr "最短曝光时间" #: src/libslic3r/PrintConfig.cpp:4704 src/libslic3r/PrintConfig.cpp:4705 msgid "Maximum exposure time" msgstr "最大曝光时间" #: src/libslic3r/PrintConfig.cpp:4712 src/libslic3r/PrintConfig.cpp:4713 msgid "Exposure time" msgstr "曝光时间" #: src/libslic3r/PrintConfig.cpp:4719 src/libslic3r/PrintConfig.cpp:4720 msgid "Minimum initial exposure time" msgstr "最短初始暴露时间" #: src/libslic3r/PrintConfig.cpp:4727 src/libslic3r/PrintConfig.cpp:4728 msgid "Maximum initial exposure time" msgstr "最大初始曝光时间" #: src/libslic3r/PrintConfig.cpp:4735 src/libslic3r/PrintConfig.cpp:4736 msgid "Initial exposure time" msgstr "初始暴露时间" #: src/libslic3r/PrintConfig.cpp:4742 src/libslic3r/PrintConfig.cpp:4743 msgid "Correction for expansion" msgstr "扩展校正" #: src/libslic3r/PrintConfig.cpp:4749 msgid "SLA print material notes" msgstr "SLA 打印材料注释" #: src/libslic3r/PrintConfig.cpp:4750 msgid "You can put your notes regarding the SLA print material here." msgstr "您可以在此处放置有关 sla 打印材料的注释." #: src/libslic3r/PrintConfig.cpp:4762 src/libslic3r/PrintConfig.cpp:4773 msgid "Default SLA material profile" msgstr "默认 SLA 材料配置文件" #: src/libslic3r/PrintConfig.cpp:4784 msgid "Generate supports" msgstr "生成支撑" #: src/libslic3r/PrintConfig.cpp:4786 msgid "Generate supports for the models" msgstr "生成模型的支撑" #: src/libslic3r/PrintConfig.cpp:4793 msgid "Diameter of the pointing side of the head" msgstr "头部指向侧的直径" #: src/libslic3r/PrintConfig.cpp:4802 msgid "How much the pinhead has to penetrate the model surface" msgstr "针头穿透模型表面的程度" #: src/libslic3r/PrintConfig.cpp:4811 msgid "Width from the back sphere center to the front sphere center" msgstr "从后球体中心到前球体中心的宽度" #: src/libslic3r/PrintConfig.cpp:4821 msgid "Diameter in mm of the support pillars" msgstr "支撑柱的直径以mm为单位" #: src/libslic3r/PrintConfig.cpp:4851 msgid "" "Controls the bridge type between two neighboring pillars. Can be zig-zag, " "cross (double zig-zag) or dynamic which will automatically switch between " "the first two depending on the distance of the two pillars." msgstr "" "控制两个相邻支柱之间的桥接类型。可以是锯齿形、交叉（双锯齿形）或动态，根据两" "个支柱的距离，在前两个柱之间自动切换。" #: src/libslic3r/PrintConfig.cpp:4859 msgid "Zig-Zag" msgstr "锯齿形" #: src/libslic3r/PrintConfig.cpp:4860 msgid "Cross" msgstr "交叉" #: src/libslic3r/PrintConfig.cpp:4861 msgid "Dynamic" msgstr "动态" #: src/libslic3r/PrintConfig.cpp:4873 msgid "Pillar widening factor" msgstr "支柱加宽系数" #: src/libslic3r/PrintConfig.cpp:4875 msgid "" "Merging bridges or pillars into another pillars can increase the radius. " "Zero means no increase, one means full increase." msgstr "" "将桥梁或柱子合并到另一个柱子中可以增加半径。零意味着没有增加,1意味着全增加。" #: src/libslic3r/PrintConfig.cpp:4884 msgid "Support base diameter" msgstr "支撑基直径" #: src/libslic3r/PrintConfig.cpp:4886 msgid "Diameter in mm of the pillar base" msgstr "柱底直径以mm为单位" #: src/libslic3r/PrintConfig.cpp:4894 msgid "Support base height" msgstr "支撑基座高度" #: src/libslic3r/PrintConfig.cpp:4896 msgid "The height of the pillar base cone" msgstr "柱底锥的高度" #: src/libslic3r/PrintConfig.cpp:4903 msgid "Support base safety distance" msgstr "支撑基部安全距离" #: src/libslic3r/PrintConfig.cpp:4906 msgid "" "The minimum distance of the pillar base from the model in mm. Makes sense in " "zero elevation mode where a gap according to this parameter is inserted " "between the model and the pad." msgstr "" "柱基与模型的最小距离(以 mm 为单位)在零高程模式下有意义,在模型和焊盘之间插入根" "据此参数的间隙。" #: src/libslic3r/PrintConfig.cpp:4916 msgid "Critical angle" msgstr "临界角度" #: src/libslic3r/PrintConfig.cpp:4918 msgid "The default angle for connecting support sticks and junctions." msgstr "用于连接支撑杆和结的默认角度。" #: src/libslic3r/PrintConfig.cpp:4926 msgid "Max bridge length" msgstr "最大桥长" #: src/libslic3r/PrintConfig.cpp:4928 msgid "The max length of a bridge" msgstr "搭桥的最大长度" #: src/libslic3r/PrintConfig.cpp:4935 msgid "Max pillar linking distance" msgstr "最大柱线链接距离" #: src/libslic3r/PrintConfig.cpp:4937 msgid "" "The max distance of two pillars to get linked with each other. A zero value " "will prohibit pillar cascading." msgstr "两根柱子相互连接的最大距离。零值将禁止柱级联。" #: src/libslic3r/PrintConfig.cpp:4960 msgid "This is a relative measure of support points density." msgstr "这是支撑点密度的相对度量。" #: src/libslic3r/PrintConfig.cpp:4966 msgid "Minimal distance of the support points" msgstr "支撑点的最小距离" #: src/libslic3r/PrintConfig.cpp:4968 msgid "No support points will be placed closer than this threshold." msgstr "不会将任何支撑点放置在比此阈值更近的位置。" #: src/libslic3r/PrintConfig.cpp:4974 msgid "Use pad" msgstr "使用垫" #: src/libslic3r/PrintConfig.cpp:4976 msgid "Add a pad underneath the supported model" msgstr "在支撑模型下添加一个垫" #: src/libslic3r/PrintConfig.cpp:4981 msgid "Pad wall thickness" msgstr "垫壁厚度" #: src/libslic3r/PrintConfig.cpp:4983 msgid "The thickness of the pad and its optional cavity walls." msgstr "垫的厚度及其可选的腔壁。" #: src/libslic3r/PrintConfig.cpp:4991 msgid "Pad wall height" msgstr "垫墙高度" #: src/libslic3r/PrintConfig.cpp:4992 msgid "" "Defines the pad cavity depth. Set to zero to disable the cavity. Be careful " "when enabling this feature, as some resins may produce an extreme suction " "effect inside the cavity, which makes peeling the print off the vat foil " "difficult." msgstr "" "定义垫腔深度。设置为零以禁用型腔。启用此功能时要小心,因为某些树脂可能在腔内产" "生极端的吸力效果,这使得从桶箔上剥下打印件变得困难。" #: src/libslic3r/PrintConfig.cpp:5016 msgid "Max merge distance" msgstr "最大合并距离" #: src/libslic3r/PrintConfig.cpp:5018 msgid "" "Some objects can get along with a few smaller pads instead of a single big " "one. This parameter defines how far the center of two smaller pads should " "be. If theyare closer, they will get merged into one pad." msgstr "" "某些对象可以使用几个较小的焊盘而不是单个大垫来配合。此参数定义两个较小焊盘的" "中心应有多远。如果他们更近，他们将被合并到一个垫子。" #: src/libslic3r/PrintConfig.cpp:5038 msgid "Pad wall slope" msgstr "垫壁斜率" #: src/libslic3r/PrintConfig.cpp:5040 msgid "" "The slope of the pad wall relative to the bed plane. 90 degrees means " "straight walls." msgstr "垫壁相对于床平面的斜率。90 度表示直壁。" #: src/libslic3r/PrintConfig.cpp:5051 msgid "Create pad around object and ignore the support elevation" msgstr "在对象周围创建垫盘并忽略支撑高程" #: src/libslic3r/PrintConfig.cpp:5063 msgid "Pad object gap" msgstr "垫对象间隙" #: src/libslic3r/PrintConfig.cpp:5065 msgid "" "The gap between the object bottom and the generated pad in zero elevation " "mode." msgstr "在零高程模式下,对象底部和生成的垫盘之间的间隙。" #: src/libslic3r/PrintConfig.cpp:5074 msgid "Pad object connector stride" msgstr "垫对象连接器步长" #: src/libslic3r/PrintConfig.cpp:5076 msgid "" "Distance between two connector sticks which connect the object and the " "generated pad." msgstr "连接对象和生成的焊盘的两个连接器杆之间的距离。" #: src/libslic3r/PrintConfig.cpp:5083 msgid "Pad object connector width" msgstr "垫对象连接器宽度" #: src/libslic3r/PrintConfig.cpp:5085 msgid "" "Width of the connector sticks which connect the object and the generated pad." msgstr "连接对象和生成的焊盘的连接器杆的宽度。" #: src/libslic3r/PrintConfig.cpp:5092 msgid "Pad object connector penetration" msgstr "垫对象连接器穿透" #: src/libslic3r/PrintConfig.cpp:5095 msgid "How much should the tiny connectors penetrate into the model body." msgstr "微型连接器应该渗透到模型主体中多少。" #: src/libslic3r/PrintConfig.cpp:6221 msgid "Export OBJ" msgstr "导出 OBJ" #: src/libslic3r/PrintConfig.cpp:6222 msgid "Export the model(s) as OBJ." msgstr "将模型导出为 OBJ。" #: src/libslic3r/PrintConfig.cpp:6234 msgid "Export SLA" msgstr "导出 SLA" #: src/libslic3r/PrintConfig.cpp:6235 msgid "Slice the model and export SLA printing layers as PNG." msgstr "将模型切片并导出 SLA 打印图层为 PNG。" #: src/libslic3r/PrintConfig.cpp:6240 msgid "Export 3MF" msgstr "导出 3MF" #: src/libslic3r/PrintConfig.cpp:6241 msgid "Export the model(s) as 3MF." msgstr "将模型导出为 3MF。" #: src/libslic3r/PrintConfig.cpp:6245 msgid "Export AMF" msgstr "导出 AMF" #: src/libslic3r/PrintConfig.cpp:6246 msgid "Export the model(s) as AMF." msgstr "将模型导出为 AMF。" #: src/libslic3r/PrintConfig.cpp:6250 msgid "Export STL" msgstr "导出STL Export STL" #: src/libslic3r/PrintConfig.cpp:6251 msgid "Export the model(s) as STL." msgstr "将模型导出为 STL。" #: src/libslic3r/PrintConfig.cpp:6256 msgid "Slice the model and export toolpaths as G-code." msgstr "切片模型并导出工具路径为 G 代码。" #: src/libslic3r/PrintConfig.cpp:6267 msgid "Slice" msgstr "切片" #: src/libslic3r/PrintConfig.cpp:6268 msgid "" "Slice the model as FFF or SLA based on the printer_technology configuration " "value." msgstr "根据 printer_technology 值将模型切片为 FFF 或 SLA。" #: src/libslic3r/PrintConfig.cpp:6273 msgid "Help" msgstr "帮助" #: src/libslic3r/PrintConfig.cpp:6274 msgid "Show this help." msgstr "显示此帮助。" #: src/libslic3r/PrintConfig.cpp:6279 msgid "Help (FFF options)" msgstr "帮助（FFF 选项）" #: src/libslic3r/PrintConfig.cpp:6280 msgid "Show the full list of print/G-code configuration options." msgstr "显示打印/G 代码配置选项的完整列表。" #: src/libslic3r/PrintConfig.cpp:6284 msgid "Help (SLA options)" msgstr "帮助（SLA 选项）" #: src/libslic3r/PrintConfig.cpp:6285 msgid "Show the full list of SLA print configuration options." msgstr "显示 SLA 打印配置选项的完整列表。" #: src/libslic3r/PrintConfig.cpp:6289 msgid "Output Model Info" msgstr "输出模型信息" #: src/libslic3r/PrintConfig.cpp:6290 msgid "Write information about the model to the console." msgstr "将有关模型的信息写入控制台。" #: src/libslic3r/PrintConfig.cpp:6294 msgid "Save config file" msgstr "保存配置文件" #: src/libslic3r/PrintConfig.cpp:6295 msgid "Save configuration to the specified file." msgstr "将配置保存到指定文件。" #: src/libslic3r/PrintConfig.cpp:6305 msgid "Align XY" msgstr "对齐 XY" #: src/libslic3r/PrintConfig.cpp:6306 msgid "Align the model to the given point." msgstr "将模型与给定点对齐。" #: src/libslic3r/PrintConfig.cpp:6311 msgid "Cut model at the given Z." msgstr "在给定的 Z 处切割模型。" #: src/libslic3r/PrintConfig.cpp:6335 msgid "Center" msgstr "居中" #: src/libslic3r/PrintConfig.cpp:6336 msgid "Center the print around the given center." msgstr "将打印居中，以给定的中心为中心。" #: src/libslic3r/PrintConfig.cpp:6340 msgid "Don't arrange" msgstr "不自动布局" #: src/libslic3r/PrintConfig.cpp:6341 msgid "" "Do not rearrange the given models before merging and keep their original XY " "coordinates." msgstr "在合并之前，不要重新布局给定的模型并保留其原始 XY 坐标。" #: src/libslic3r/PrintConfig.cpp:6344 msgid "Duplicate" msgstr "复制" #: src/libslic3r/PrintConfig.cpp:6345 msgid "Multiply copies by this factor." msgstr "生成乘以此数量的副本。" #: src/libslic3r/PrintConfig.cpp:6349 msgid "Duplicate by grid" msgstr "按网格复制" #: src/libslic3r/PrintConfig.cpp:6350 msgid "Multiply copies by creating a grid." msgstr "通过创建网格来创建副本。" #: src/libslic3r/PrintConfig.cpp:6354 msgid "" "Arrange the supplied models in a plate and merge them in a single model in " "order to perform actions once." msgstr "" "将提供的模型排列在一个板中，并将它们合并到单个模型中，以便执行一次操作。" #: src/libslic3r/PrintConfig.cpp:6359 msgid "" "Try to repair any non-manifold meshes (this option is implicitly added " "whenever we need to slice the model to perform the requested action)." msgstr "" "尝试修复面（每当我们需要执行模型切片请求的操作时，都会隐式添加此选项）。" #: src/libslic3r/PrintConfig.cpp:6363 msgid "Rotation angle around the Z axis in degrees." msgstr "围绕 Z 轴的旋转角度（以度表示）。" #: src/libslic3r/PrintConfig.cpp:6367 msgid "Rotate around X" msgstr "围绕 X 旋转" #: src/libslic3r/PrintConfig.cpp:6368 msgid "Rotation angle around the X axis in degrees." msgstr "围绕 X 轴的旋转角度（以度表示）。" #: src/libslic3r/PrintConfig.cpp:6372 msgid "Rotate around Y" msgstr "围绕 Y 旋转" #: src/libslic3r/PrintConfig.cpp:6373 msgid "Rotation angle around the Y axis in degrees." msgstr "围绕 Y 轴的旋转角度（以度表示）。" #: src/libslic3r/PrintConfig.cpp:6378 msgid "Scaling factor or percentage." msgstr "缩放因子或百分比。" #: src/libslic3r/PrintConfig.cpp:6383 msgid "" "Detect unconnected parts in the given model(s) and split them into separate " "objects." msgstr "检测给定模型中的未连接部件，并将它们拆分为单独的对象。" #: src/libslic3r/PrintConfig.cpp:6386 msgid "Scale to Fit" msgstr "缩放至合适" #: src/libslic3r/PrintConfig.cpp:6387 msgid "Scale to fit the given volume." msgstr "缩放以适合给定的空间。" #: src/libslic3r/PrintConfig.cpp:6396 msgid "Ignore non-existent config files" msgstr "忽略不存在的配置文件" #: src/libslic3r/PrintConfig.cpp:6397 msgid "Do not fail if a file supplied to --load does not exist." msgstr "如果提供给 --load 的文件不存在，不会报错失败。" #: src/libslic3r/PrintConfig.cpp:6400 msgid "Load config file" msgstr "加载配置文件" #: src/libslic3r/PrintConfig.cpp:6401 msgid "" "Load configuration from the specified file. It can be used more than once to " "load options from multiple files." msgstr "从指定文件加载配置。可以加载多次来从多个文件加载选项。" #: src/libslic3r/PrintConfig.cpp:6404 msgid "Output File" msgstr "输出文件" #: src/libslic3r/PrintConfig.cpp:6405 msgid "" "The file where the output will be written (if not specified, it will be " "based on the input file)." msgstr "将写入输出的文件（如果未指定，则基于输入文件）。" #: src/libslic3r/PrintConfig.cpp:6421 msgid "Data directory" msgstr "数据目录" #: src/libslic3r/PrintConfig.cpp:6422 msgid "" "Load and store settings at the given directory. This is useful for " "maintaining different profiles or including configurations from a network " "storage." msgstr "" "在给定目录加载和存储设置。这对于维护不同的配置文件或包括网络存储中的配置非常" "有用。" #: src/libslic3r/PrintConfig.cpp:6425 msgid "Logging level" msgstr "日志级别" #: src/libslic3r/PrintConfig.cpp:6432 msgid "Render with a software renderer" msgstr "使用软件渲染器渲染" #: src/libslic3r/PrintConfig.cpp:6433 msgid "" "Render with a software renderer. The bundled MESA software renderer is " "loaded instead of the default OpenGL driver." msgstr "" "使用软件渲染器进行渲染。加载捆绑的 MESA 软件呈现器,而不是默认的 OpenGL 驱动程" "序。" #: src/libslic3r/PrintObject.cpp:115 msgid "Processing triangulated mesh" msgstr "处理三角网格" #: src/libslic3r/PrintObject.cpp:277 msgid "Generating perimeters" msgstr "生成轮廓" #: src/libslic3r/PrintObject.cpp:395 msgid "Preparing infill" msgstr "准备填充" #: src/libslic3r/PrintObject.cpp:581 msgid "Generating support material" msgstr "生成支撑材料" #: src/libslic3r/SLAPrint.cpp:630 msgid "" "Cannot proceed without support points! Add support points or disable support " "generation." msgstr "没有支撑点就无法继续！添加支撑点或禁用支撑生成。" #: src/libslic3r/SLAPrint.cpp:648 msgid "" "The endings of the support pillars will be deployed on the gap between the " "object and the pad. 'Support base safety distance' has to be greater than " "the 'Pad object gap' parameter to avoid this." msgstr "" "支撑柱的尾数将部署在物体和垫子之间的间隙上。\"支撑基基安全距离\"必须大于\"垫" "对象间隙\"参数,以避免这种情况。" #: src/libslic3r/SLAPrint.cpp:663 msgid "Exposition time is out of printer profile bounds." msgstr "曝光时间超出打印机配置文件限制。" #: src/libslic3r/SLAPrint.cpp:670 msgid "Initial exposition time is out of printer profile bounds." msgstr "初始曝光时间超出打印机配置文件边界。" #: src/libslic3r/SLAPrint.cpp:792 msgid "Slicing done" msgstr "切片完成" #: src/libslic3r/SLAPrintSteps.cpp:46 msgid "Slicing model" msgstr "切片模型" #: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:361 msgid "Generating support points" msgstr "生成支撑点" #: src/libslic3r/SLAPrintSteps.cpp:48 msgid "Generating support tree" msgstr "生成支撑树" #: src/libslic3r/SLAPrintSteps.cpp:49 msgid "Generating pad" msgstr "生成垫" #: src/libslic3r/SLAPrintSteps.cpp:50 msgid "Slicing supports" msgstr "切片支撑" #: src/libslic3r/SLAPrintSteps.cpp:65 msgid "Merging slices and calculating statistics" msgstr "合并切片并计算统计信息" #: src/libslic3r/SLAPrintSteps.cpp:66 msgid "Rasterizing layers" msgstr "栅格化层" #: src/libslic3r/SLAPrintSteps.cpp:247 msgid "" "Slicing had to be stopped due to an internal error: Inconsistent slice index." msgstr "由于内部错误:切片索引不一致,必须停止切片。" #: src/libslic3r/SLAPrintSteps.cpp:413 src/libslic3r/SLAPrintSteps.cpp:422 #: src/libslic3r/SLAPrintSteps.cpp:461 msgid "Visualizing supports" msgstr "可视化支撑" #: src/libslic3r/Zipper.cpp:27 msgid "Error with zip archive" msgstr "使用 zip 存档时出错" #: ../../ui_layout/extruder.ui : l6 msgid "Layer height limits" msgstr "层高度限制" #: ../../ui_layout/extruder.ui : l16 msgid "Only lift Z" msgstr "仅提升 Z" #: ../../ui_layout/extruder.ui : l34 msgid "Retraction when tool is disabled (advanced settings for multi-extruder setups)" msgstr "工具禁用时的回抽 (多挤出机设置的高级设置)" #: ../../ui_layout/filament.ui : l14 msgid "Bed" msgstr "床" #: ../../ui_layout/filament.ui : l19 msgid "Filament properties" msgstr "耗材丝特性" #: ../../ui_layout/filament.ui : l23 msgid "Print speed override" msgstr "打印速度覆盖" #: ../../ui_layout/filament.ui : l63 msgid "Wipe tower parameters" msgstr "擦料塔参数" #: ../../ui_layout/filament.ui : l66 msgid "Toolchange parameters with single extruder MM printers" msgstr "单挤出机 多色 打印机的工具更换参数" #: ../../ui_layout/milling.ui : l9 msgid "G-Code" msgstr "G-code" #: ../../ui_layout/print.ui : l2 msgid "Vertical shells" msgstr "垂直外壳" #: ../../ui_layout/print.ui : l6 msgid "Horizontal shells" msgstr "水平外壳" #: ../../ui_layout/print.ui : l53 msgid "Gap Fill" msgstr "间隙填充" #: ../../ui_layout/print.ui : l103 msgid "Other" msgstr "其他" #: ../../ui_layout/print.ui : l130 msgid "Reducing printing time" msgstr "缩短打印时间" #: ../../ui_layout/print.ui : l192 msgid "Raft" msgstr "基座" #: ../../ui_layout/print.ui : l195 msgid "Options for support material and raft" msgstr "支撑材料和基座的选项" #: ../../ui_layout/print.ui : l216 msgid "Speed for print moves" msgstr "打印移动速度" #: ../../ui_layout/print.ui : l240 msgid "Speed for non-print moves" msgstr "非打印移动的速度" #: ../../ui_layout/print.ui : l242 msgid "Modifiers" msgstr "修改器" #: ../../ui_layout/print.ui : l243 msgid "First layer speed" msgstr "第一层速度" #: ../../ui_layout/print.ui : l251 msgid "Acceleration control (advanced)" msgstr "加速控制（高级）" #: ../../ui_layout/print.ui : l257 msgid "Autospeed (advanced)" msgstr "自动调速 (高级)" #: ../../ui_layout/print.ui : l261 msgid "width" msgstr "宽度" #: ../../ui_layout/print.ui : l262 msgid "Extrusion width" msgstr "挤出宽度" #: ../../ui_layout/print.ui : l267 msgid "first layer" msgstr "第一层" #: ../../ui_layout/print.ui : l271 msgid "perimeter" msgstr "周长" #: ../../ui_layout/print.ui : l275 msgid "external perimeter" msgstr "外部轮廓" #: ../../ui_layout/print.ui : l291 msgid "support material" msgstr "支撑材料" #: ../../ui_layout/print.ui : l294 msgid "skirt" msgstr "裙边" #: ../../ui_layout/print.ui : l306 msgid "Flow" msgstr "流量" #: ../../ui_layout/print.ui : l322 msgid "Ooze prevention" msgstr "Ooze 预防" #: ../../ui_layout/print.ui : l343 msgid "Sequential printing" msgstr "顺序打印" #: ../../ui_layout/print.ui : l347 msgid "Extruder clearance (mm)" msgstr "挤出机间隙（mm）" #: ../../ui_layout/printer_fff.ui : l2 msgid "Size and coordinates" msgstr "大小和坐标" #: ../../ui_layout/printer_fff.ui : l56 msgid "Between objects G-code (for sequential printing)" msgstr "模型对象之间的 G-code (用于顺序打印)" #: ../../ui_layout/printer_sla.ui : l7 msgid "Display" msgstr "显示" #: ../../ui_layout/printer_sla.ui : l20 msgid "Tilt" msgstr "倾斜" #: ../../ui_layout/printer_sla.ui : l21 msgid "Tilt time" msgstr "倾斜时间" #: ../../ui_layout/sla_print.ui : l33 msgid "pad" msgstr "垫"