# Translation file for Taiwanese Mandarin
# Copyright (C) 2021
# This file is distributed under the same license as Slic3r.
#
msgid ""
msgstr ""
"Project-Id-Version: Slic3r\n"
"POT-Creation-Date: 2021-05-26 00:00+0200\n"
"PO-Revision-Date: 2021-05-26 00:00+0200\n"
"Last-Translator: Prusa\n"
"Language-Team:\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language: zh_tw\n"

#: src/slic3r/GUI/AboutDialog.cpp:242 src/slic3r/GUI/AboutDialog.cpp:372
#: src/slic3r/GUI/GUI_App.cpp:261 src/slic3r/GUI/MainFrame.cpp:151
msgid "Version"
msgstr "版本"


#: src/slic3r/GUI/BedShapeDialog.cpp:93
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:240 src/slic3r/GUI/Plater.cpp:162
msgid "Size"
msgstr "尺寸"


#: src/slic3r/GUI/BedShapeDialog.cpp:94
msgid "Origin"
msgstr "原點"


#: src/slic3r/GUI/BedShapeDialog.cpp:95 src/libslic3r/PrintConfig.cpp:1445
msgid "Diameter"
msgstr "直徑"


#: src/slic3r/GUI/BedShapeDialog.cpp:110
msgid "Size in X and Y of the rectangular plate."
msgstr "矩形框在X和Y方向的尺寸。"


#: src/slic3r/GUI/BedShapeDialog.cpp:121
msgid ""
"Distance of the 0,0 G-code coordinate from the front left corner of the "
"rectangle."
msgstr "G-code 0,0 座標相對於矩形框左前角落的距離。"


#: src/slic3r/GUI/BedShapeDialog.cpp:129 src/slic3r/GUI/ConfigWizard.cpp:247
#: src/slic3r/GUI/ConfigWizard.cpp:1381 src/slic3r/GUI/ConfigWizard.cpp:1395
#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:88
#: src/slic3r/GUI/GCodeViewer.cpp:2428 src/slic3r/GUI/GCodeViewer.cpp:2434
#: src/slic3r/GUI/GCodeViewer.cpp:2442
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:179
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:145
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:341
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:418
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:487
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:488
#: src/slic3r/GUI/ObjectDataViewModel.cpp:96
#: src/slic3r/GUI/WipeTowerDialog.cpp:85 src/libslic3r/PrintConfig.cpp:115
#: src/libslic3r/PrintConfig.cpp:124 src/libslic3r/PrintConfig.cpp:135
#: src/libslic3r/PrintConfig.cpp:297 src/libslic3r/PrintConfig.cpp:423
#: src/libslic3r/PrintConfig.cpp:432 src/libslic3r/PrintConfig.cpp:462
#: src/libslic3r/PrintConfig.cpp:485 src/libslic3r/PrintConfig.cpp:603
#: src/libslic3r/PrintConfig.cpp:612 src/libslic3r/PrintConfig.cpp:667
#: src/libslic3r/PrintConfig.cpp:1064 src/libslic3r/PrintConfig.cpp:1077
#: src/libslic3r/PrintConfig.cpp:1098 src/libslic3r/PrintConfig.cpp:1344
#: src/libslic3r/PrintConfig.cpp:1448 src/libslic3r/PrintConfig.cpp:1681
#: src/libslic3r/PrintConfig.cpp:2267 src/libslic3r/PrintConfig.cpp:2519
#: src/libslic3r/PrintConfig.cpp:2606 src/libslic3r/PrintConfig.cpp:2616
#: src/libslic3r/PrintConfig.cpp:2648 src/libslic3r/PrintConfig.cpp:2668
#: src/libslic3r/PrintConfig.cpp:2824 src/libslic3r/PrintConfig.cpp:2834
#: src/libslic3r/PrintConfig.cpp:2993 src/libslic3r/PrintConfig.cpp:3002
#: src/libslic3r/PrintConfig.cpp:3057 src/libslic3r/PrintConfig.cpp:3066
#: src/libslic3r/PrintConfig.cpp:3077 src/libslic3r/PrintConfig.cpp:3107
#: src/libslic3r/PrintConfig.cpp:3116 src/libslic3r/PrintConfig.cpp:3205
#: src/libslic3r/PrintConfig.cpp:3224 src/libslic3r/PrintConfig.cpp:3337
#: src/libslic3r/PrintConfig.cpp:3348 src/libslic3r/PrintConfig.cpp:3512
#: src/libslic3r/PrintConfig.cpp:3638 src/libslic3r/PrintConfig.cpp:3651
#: src/libslic3r/PrintConfig.cpp:3721 src/libslic3r/PrintConfig.cpp:3780
#: src/libslic3r/PrintConfig.cpp:3848 src/libslic3r/PrintConfig.cpp:4021
#: src/libslic3r/PrintConfig.cpp:4165 src/libslic3r/PrintConfig.cpp:4173
#: src/libslic3r/PrintConfig.cpp:4181 src/libslic3r/PrintConfig.cpp:4214
#: src/libslic3r/PrintConfig.cpp:4221 src/libslic3r/PrintConfig.cpp:4233
#: src/libslic3r/PrintConfig.cpp:4244 src/libslic3r/PrintConfig.cpp:4256
#: src/libslic3r/PrintConfig.cpp:4300 src/libslic3r/PrintConfig.cpp:4311
#: src/libslic3r/PrintConfig.cpp:4429 src/libslic3r/PrintConfig.cpp:4440
#: src/libslic3r/PrintConfig.cpp:4448 src/libslic3r/PrintConfig.cpp:4456
#: src/libslic3r/PrintConfig.cpp:4621 src/libslic3r/PrintConfig.cpp:4655
#: src/libslic3r/PrintConfig.cpp:4794 src/libslic3r/PrintConfig.cpp:4803
#: src/libslic3r/PrintConfig.cpp:4812 src/libslic3r/PrintConfig.cpp:4822
#: src/libslic3r/PrintConfig.cpp:4887 src/libslic3r/PrintConfig.cpp:4897
#: src/libslic3r/PrintConfig.cpp:4909 src/libslic3r/PrintConfig.cpp:4929
#: src/libslic3r/PrintConfig.cpp:4939 src/libslic3r/PrintConfig.cpp:4951
#: src/libslic3r/PrintConfig.cpp:4969 src/libslic3r/PrintConfig.cpp:4984
#: src/libslic3r/PrintConfig.cpp:4998 src/libslic3r/PrintConfig.cpp:5009
#: src/libslic3r/PrintConfig.cpp:5022 src/libslic3r/PrintConfig.cpp:5067
#: src/libslic3r/PrintConfig.cpp:5077 src/libslic3r/PrintConfig.cpp:5086
#: src/libslic3r/PrintConfig.cpp:5096 src/libslic3r/PrintConfig.cpp:5112
#: src/libslic3r/PrintConfig.cpp:5136
msgid "mm"
msgstr "毫米"


#: src/slic3r/GUI/BedShapeDialog.cpp:131
msgid ""
"Diameter of the print bed. It is assumed that origin (0,0) is located in the "
"center."
msgstr "列印牀的直徑。假定原點 (0, 0) 位於中心。"


#: src/slic3r/GUI/BedShapeDialog.cpp:141
msgid "Rectangular"
msgstr "矩形"


#: src/slic3r/GUI/BedShapeDialog.cpp:142
msgid "Circular"
msgstr "圓形"


#: src/slic3r/GUI/BedShapeDialog.cpp:143 src/slic3r/GUI/GUI_Preview.cpp:282
#: src/slic3r/GUI/GUI_Preview.cpp:1143 src/libslic3r/ExtrusionEntity.cpp:287
#: src/libslic3r/ExtrusionEntity.cpp:330
msgid "Custom"
msgstr "自定義"


#: src/slic3r/GUI/BedShapeDialog.cpp:156 src/slic3r/GUI/BedShapeDialog.cpp:222
#: src/slic3r/GUI/GUI_ObjectList.cpp:2317
msgid "Shape"
msgstr "形狀"


#: src/slic3r/GUI/BedShapeDialog.cpp:243
msgid "Load shape from STL..."
msgstr "從STL文件加載形狀..."


#: src/slic3r/GUI/BedShapeDialog.cpp:292 src/slic3r/GUI/MainFrame.cpp:2131
msgid "Settings"
msgstr "設置"


#: src/slic3r/GUI/BedShapeDialog.cpp:325 src/slic3r/GUI/BedShapeDialog.cpp:405
msgid "Load..."
msgstr "加載..."


#: src/slic3r/GUI/BedShapeDialog.cpp:333 src/slic3r/GUI/BedShapeDialog.cpp:413
#: src/slic3r/GUI/Tab.cpp:3655
msgid "Remove"
msgstr "移除"


#: src/slic3r/GUI/BedShapeDialog.cpp:395
msgid "Model"
msgstr "模型"


#: src/slic3r/GUI/BedShapeDialog.cpp:589
msgid "The selected file contains no geometry."
msgstr "所選文件不包含任何幾何圖形。"


#: src/slic3r/GUI/BedShapeDialog.cpp:593
msgid ""
"The selected file contains several disjoint areas. This is not supported."
msgstr "所選文件包含多個不重合的區域。暫不支持這種類型。"


#: src/slic3r/GUI/BedShapeDialog.hpp:98 src/slic3r/GUI/ConfigWizard.cpp:1340
msgid "Bed Shape"
msgstr "熱牀形狀"


#: src/slic3r/GUI/BonjourDialog.cpp:55
msgid "Network lookup"
msgstr "從網絡查找"


#: src/slic3r/GUI/BonjourDialog.cpp:72
msgid "Address"
msgstr "地址"


#: src/slic3r/GUI/BonjourDialog.cpp:73
msgid "Hostname"
msgstr "主機名"


#: src/slic3r/GUI/BonjourDialog.cpp:74
msgid "Service name"
msgstr "服務名稱"


#: src/slic3r/GUI/BonjourDialog.cpp:76
msgid "OctoPrint version"
msgstr "OctoPrint 版本"


#: src/slic3r/GUI/BonjourDialog.cpp:218
msgid "Searching for devices"
msgstr "正在查找設備"


#: src/slic3r/GUI/BonjourDialog.cpp:225
msgid "Finished"
msgstr "已完成"


#: src/slic3r/GUI/ButtonsDescription.cpp:16
msgid "Buttons And Text Colors Description"
msgstr "按鈕和文本顏色描述"


#: src/slic3r/GUI/ButtonsDescription.cpp:36
msgid "Value is the same as the system value"
msgstr "值與系統值相同"


#: src/slic3r/GUI/ButtonsDescription.cpp:65
msgid ""
"Value was changed and is not equal to the system value or the last saved "
"preset"
msgstr "值已更改, 不等於系統值或上次保存的預設值"


#: src/slic3r/GUI/CalibrationAbstractDialog.cpp:61
#: src/slic3r/GUI/FirmwareDialog.cpp:852 src/slic3r/GUI/FreeCADDialog.cpp:302
#: src/slic3r/GUI/Mouse3DController.cpp:551
#: src/slic3r/GUI/PrintHostDialogs.cpp:202
msgid "Close"
msgstr "關閉"


#: src/slic3r/GUI/CalibrationAbstractDialog.cpp:85
#: src/slic3r/GUI/GUI_ObjectList.cpp:2170
msgid "Error!"
msgstr "錯誤!"


#: src/slic3r/GUI/CalibrationAbstractDialog.cpp:150
#: src/slic3r/GUI/KBShortcutsDialog.cpp:276
msgid "Keyboard shortcuts"
msgstr "鍵盤快捷鍵"


#: src/slic3r/GUI/ConfigManipulation.cpp:49
#: src/slic3r/GUI/GUI_ObjectLayers.cpp:29
msgid "Layer height"
msgstr "層高"


#: src/slic3r/GUI/ConfigManipulation.cpp:61 src/libslic3r/PrintConfig.cpp:1767
msgid "First layer height"
msgstr "首層高度"


#: src/slic3r/GUI/ConfigManipulation.cpp:97
msgid "Spiral Vase"
msgstr "螺旋式容器"


#: src/slic3r/GUI/ConfigManipulation.cpp:160
#: src/slic3r/GUI/ConfigManipulation.cpp:191
#: src/slic3r/GUI/ConfigManipulation.cpp:236
msgid "Wipe Tower"
msgstr "擦料塔"


#: src/slic3r/GUI/ConfigManipulation.cpp:233
msgid " mm."
msgstr " 毫米."


#: src/slic3r/GUI/ConfigManipulation.cpp:293
msgid "Support Generator"
msgstr "支撐生成器"


#: src/slic3r/GUI/ConfigManipulation.cpp:334 src/slic3r/GUI/Plater.cpp:389
#: src/libslic3r/PrintConfig.cpp:1795 src/libslic3r/PrintConfig.cpp:1952
#: src/libslic3r/PrintConfig.cpp:2132 src/libslic3r/PrintConfig.cpp:2148
msgid "Infill"
msgstr "填充"


#: src/slic3r/GUI/ConfigManipulation.cpp:517
msgid "Head penetration should not be greater than the head width."
msgstr "頭部滲透不應大於頭部寬度。"


#: src/slic3r/GUI/ConfigManipulation.cpp:519
msgid "Invalid Head penetration"
msgstr "無效的頭部滲透"


#: src/slic3r/GUI/ConfigManipulation.cpp:530
msgid "Pinhead diameter should be smaller than the pillar diameter."
msgstr "針頭直徑應小於柱直徑。"


#: src/slic3r/GUI/ConfigManipulation.cpp:532
msgid "Invalid pinhead diameter"
msgstr "針頭直徑無效"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:19
msgid "Upgrade"
msgstr "升級"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:21
msgid "Downgrade"
msgstr "降級"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:23
msgid "Before roll back"
msgstr "回滾之前"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:25
#: src/libslic3r/PrintConfig.cpp:177
msgid "User"
msgstr "用戶"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:28
#: src/slic3r/GUI/GUI_Preview.cpp:266 src/libslic3r/ExtrusionEntity.cpp:270
msgid "Unknown"
msgstr "未知"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:44
msgid "Active"
msgstr "啓動"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:51
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:67
#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:69
msgid " version"
msgstr " 版本"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:55 src/libslic3r/Preset.cpp:1548
msgid "print"
msgstr "列印"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:56
msgid "filaments"
msgstr "耗材"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:59 src/libslic3r/Preset.cpp:1550
msgid "SLA print"
msgstr "SLA 列印"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:60 src/slic3r/GUI/Plater.cpp:697
#: src/libslic3r/Preset.cpp:1551
msgid "SLA material"
msgstr "SLA 材料"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:62 src/libslic3r/Preset.cpp:1552
msgid "printer"
msgstr "印表機"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66 src/slic3r/GUI/Tab.cpp:1373
msgid "vendor"
msgstr "供應商"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:66
msgid "version"
msgstr "版本"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
msgid "model"
msgstr "模型"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:72
msgid "variants"
msgstr "變種"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:87
msgid "Activate"
msgstr "啟用"


#: src/slic3r/GUI/ConfigSnapshotDialog.cpp:113
msgid "Configuration Snapshots"
msgstr "配置快照"


#: src/slic3r/GUI/ConfigWizard.cpp:247
msgid "nozzle"
msgstr "噴嘴"


#: src/slic3r/GUI/ConfigWizard.cpp:251
msgid "Alternate nozzles:"
msgstr "備用噴嘴:"


#: src/slic3r/GUI/ConfigWizard.cpp:315
msgid "All standard"
msgstr "所有標準"


#: src/slic3r/GUI/ConfigWizard.cpp:316 src/slic3r/GUI/ConfigWizard.cpp:616
#: src/slic3r/GUI/Tab.cpp:3736 src/slic3r/GUI/UnsavedChangesDialog.cpp:933
msgid "All"
msgstr "所有"


#: src/slic3r/GUI/ConfigWizard.cpp:317 src/slic3r/GUI/ConfigWizard.cpp:617
#: src/slic3r/GUI/DoubleSlider.cpp:1872 src/slic3r/GUI/Plater.cpp:361
#: src/slic3r/GUI/Plater.cpp:504
msgid "None"
msgstr "無"


#: src/slic3r/GUI/ConfigWizard.cpp:461
msgid "Welcome"
msgstr "歡迎"


#: src/slic3r/GUI/ConfigWizard.cpp:510
#, possible-c-format
msgid "%s Family"
msgstr "%s 家庭"


#: src/slic3r/GUI/ConfigWizard.cpp:605
msgid "Printer:"
msgstr "印表機:"


#: src/slic3r/GUI/ConfigWizard.cpp:607
msgid "Vendor:"
msgstr "供應商:"


#: src/slic3r/GUI/ConfigWizard.cpp:1118
msgid "Custom Printer Setup"
msgstr "自定義印表機設置"


#: src/slic3r/GUI/ConfigWizard.cpp:1118
msgid "Custom Printer"
msgstr "自定義印表機"


#: src/slic3r/GUI/ConfigWizard.cpp:1120
msgid "Define a custom printer profile"
msgstr "定義自定義印表機配置文件"


#: src/slic3r/GUI/ConfigWizard.cpp:1122
msgid "Custom profile name:"
msgstr "自定義配置文件名稱:"


#: src/slic3r/GUI/ConfigWizard.cpp:1147
msgid "Automatic updates"
msgstr "自動更新"


#: src/slic3r/GUI/ConfigWizard.cpp:1147
msgid "Updates"
msgstr "更新"


#: src/slic3r/GUI/ConfigWizard.cpp:1155 src/slic3r/GUI/Preferences.cpp:97
msgid "Check for application updates"
msgstr "檢查應用程序更新"


#: src/slic3r/GUI/ConfigWizard.cpp:1165 src/slic3r/GUI/Preferences.cpp:132
msgid "Update built-in Presets automatically"
msgstr "自動更新內置預設"


#: src/slic3r/GUI/ConfigWizard.cpp:1172
msgid ""
"Updates are never applied without user's consent and never overwrite user's "
"customized settings."
msgstr "未經用戶同意, 永遠不會應用更新, 也永遠不會覆蓋用戶的自定義設置。"


#: src/slic3r/GUI/ConfigWizard.cpp:1177
msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr "此外, 在應用更新之前, 將創建整個配置的備份快照。"


#: src/slic3r/GUI/ConfigWizard.cpp:1184 src/slic3r/GUI/GUI_ObjectList.cpp:1844
#: src/slic3r/GUI/GUI_ObjectList.cpp:4598 src/slic3r/GUI/Plater.cpp:3230
#: src/slic3r/GUI/Plater.cpp:4124 src/slic3r/GUI/Plater.cpp:4155
msgid "Reload from disk"
msgstr "從磁盤重新加載"


#: src/slic3r/GUI/ConfigWizard.cpp:1266
msgid "Other Vendors"
msgstr "其他供應商"


#: src/slic3r/GUI/ConfigWizard.cpp:1302
msgid "Firmware Type"
msgstr "固件類型"


#: src/slic3r/GUI/ConfigWizard.cpp:1302
msgid "Firmware"
msgstr "固件"


#: src/slic3r/GUI/ConfigWizard.cpp:1306
msgid "Choose the type of firmware used by your printer."
msgstr "選擇印表機使用的固件類型。"


#: src/slic3r/GUI/ConfigWizard.cpp:1340
msgid "Bed Shape and Size"
msgstr "熱牀形狀和大小"


#: src/slic3r/GUI/ConfigWizard.cpp:1343
msgid "Set the shape of your printer's bed."
msgstr "設置印表機熱牀的形狀。"


#: src/slic3r/GUI/ConfigWizard.cpp:1363
msgid "Filament and Nozzle Diameters"
msgstr "耗材絲和噴嘴直徑"


#: src/slic3r/GUI/ConfigWizard.cpp:1363
msgid "Print Diameters"
msgstr "列印直徑"


#: src/slic3r/GUI/ConfigWizard.cpp:1377
msgid "Enter the diameter of your printer's hot end nozzle."
msgstr "輸入印表機熱端噴嘴的直徑。"


#: src/slic3r/GUI/ConfigWizard.cpp:1380
msgid "Nozzle Diameter:"
msgstr "噴嘴直徑:"


#: src/slic3r/GUI/ConfigWizard.cpp:1390
msgid "Enter the diameter of your filament."
msgstr "輸入耗材絲的直徑。"


#: src/slic3r/GUI/ConfigWizard.cpp:1391
msgid ""
"Good precision is required, so use a caliper and do multiple measurements "
"along the filament, then compute the average."
msgstr ""
"需要良好的精度, 因此請使用遊標卡尺, 沿耗材絲進行多次測量, 然後計算平均值。"


#: src/slic3r/GUI/ConfigWizard.cpp:1394
msgid "Filament Diameter:"
msgstr "耗材絲直徑:"


#: src/slic3r/GUI/ConfigWizard.cpp:1423
msgid "Temperatures"
msgstr "溫度"


#: src/slic3r/GUI/ConfigWizard.cpp:1439
msgid "Enter the temperature needed for extruding your filament."
msgstr "輸入擠出耗材絲所需的溫度。"


#: src/slic3r/GUI/ConfigWizard.cpp:1440
msgid "A rule of thumb is 160 to 230 °C for PLA, and 215 to 250 °C for ABS."
msgstr "根據經驗, PLA 爲160至 230°C, ABS 爲215至250°C。"


#: src/slic3r/GUI/ConfigWizard.cpp:1443
msgid "Extrusion Temperature:"
msgstr "擠出溫度:"


#: src/slic3r/GUI/ConfigWizard.cpp:1444 src/slic3r/GUI/ConfigWizard.cpp:1458
#: src/libslic3r/PrintConfig.cpp:253 src/libslic3r/PrintConfig.cpp:255
#: src/libslic3r/PrintConfig.cpp:495 src/libslic3r/PrintConfig.cpp:1108
#: src/libslic3r/PrintConfig.cpp:1336 src/libslic3r/PrintConfig.cpp:1730
#: src/libslic3r/PrintConfig.cpp:1814 src/libslic3r/PrintConfig.cpp:3831
msgid "°C"
msgstr "°C"


#: src/slic3r/GUI/ConfigWizard.cpp:1453
msgid ""
"Enter the bed temperature needed for getting your filament to stick to your "
"heated bed."
msgstr "輸入讓你的耗材粘在熱牀上所需的牀溫。"


#: src/slic3r/GUI/ConfigWizard.cpp:1454
msgid ""
"A rule of thumb is 60 °C for PLA and 110 °C for ABS. Leave zero if you have "
"no heated bed."
msgstr "根據經驗, PLA 爲 60°C, ABS 爲 110°C. 如果沒有加熱牀, 請保留零。"


#: src/slic3r/GUI/ConfigWizard.cpp:1457
msgid "Bed Temperature:"
msgstr "熱牀溫度:"


#: src/slic3r/GUI/ConfigWizard.cpp:1897 src/slic3r/GUI/ConfigWizard.cpp:2639
msgid "Filaments"
msgstr "耗材"


#: src/slic3r/GUI/ConfigWizard.cpp:2289 src/slic3r/GUI/DoubleSlider.cpp:2258
#: src/slic3r/GUI/DoubleSlider.cpp:2278 src/slic3r/GUI/GUI.cpp:260
msgid "Notice"
msgstr "通知"


#: src/slic3r/GUI/ConfigWizard.cpp:2584
msgid "< &Back"
msgstr "< &返回"


#: src/slic3r/GUI/ConfigWizard.cpp:2585
msgid "&Next >"
msgstr "&繼續 >"


#: src/slic3r/GUI/ConfigWizard.cpp:2586
msgid "&Finish"
msgstr "&結束"


#: src/slic3r/GUI/ConfigWizard.cpp:2587 src/slic3r/GUI/FirmwareDialog.cpp:151
#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:248
#: src/slic3r/GUI/ProgressStatusBar.cpp:26
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:656
msgid "Cancel"
msgstr "取消"


#: src/slic3r/GUI/ConfigWizard.cpp:2602
msgid "Prusa FFF Technology Printers"
msgstr "Prusa FFF 技術印表機"


#: src/slic3r/GUI/ConfigWizard.cpp:2605
msgid "Prusa MSLA Technology Printers"
msgstr "Prusa MSLA 技術印表機"


#: src/slic3r/GUI/ConfigWizard.cpp:2767
msgid "Configuration Assistant"
msgstr "配置助手"


#: src/slic3r/GUI/ConfigWizard.cpp:2768
msgid "Configuration &Assistant"
msgstr "配置 &助手"


#: src/slic3r/GUI/ConfigWizard.cpp:2770
msgid "Configuration Wizard"
msgstr "配置嚮導"


#: src/slic3r/GUI/ConfigWizard.cpp:2771
msgid "Configuration &Wizard"
msgstr "配置 &嚮導"


#: src/slic3r/GUI/DoubleSlider.cpp:1430 src/slic3r/GUI/DoubleSlider.cpp:1464
#: src/slic3r/GUI/GUI_ObjectList.cpp:1883
#, possible-c-format
msgid "Extruder %d"
msgstr "擠出頭 %d"


#: src/slic3r/GUI/DoubleSlider.cpp:1431 src/slic3r/GUI/GUI_ObjectList.cpp:1884
msgid "active"
msgstr "啓動"


#: src/slic3r/GUI/DoubleSlider.cpp:1440 src/slic3r/GUI/GUI_ObjectList.cpp:1851
msgid "Change extruder"
msgstr "更換擠出機"


#: src/slic3r/GUI/ExtraRenderers.cpp:297 src/slic3r/GUI/GUI_ObjectList.cpp:522
#: src/slic3r/GUI/GUI_ObjectList.cpp:534
#: src/slic3r/GUI/GUI_ObjectList.cpp:1030
#: src/slic3r/GUI/GUI_ObjectList.cpp:4613
#: src/slic3r/GUI/GUI_ObjectList.cpp:4623
#: src/slic3r/GUI/GUI_ObjectList.cpp:4658
#: src/slic3r/GUI/ObjectDataViewModel.cpp:209
#: src/slic3r/GUI/ObjectDataViewModel.cpp:266
#: src/slic3r/GUI/ObjectDataViewModel.cpp:291
#: src/slic3r/GUI/ObjectDataViewModel.cpp:499
#: src/libslic3r/PrintConfig.cpp:1045
msgid "default"
msgstr "默認"


#: src/slic3r/GUI/ExtruderSequenceDialog.cpp:53
#: src/libslic3r/PrintConfig.cpp:649 src/libslic3r/PrintConfig.cpp:1968
#: src/libslic3r/PrintConfig.cpp:2979 src/libslic3r/PrintConfig.cpp:3215
#: src/libslic3r/PrintConfig.cpp:3378 src/libslic3r/PrintConfig.cpp:3663
#: src/libslic3r/PrintConfig.cpp:3712
msgid "layers"
msgstr "層"


#: src/slic3r/GUI/Field.cpp:204
msgid "default value"
msgstr "默認值"


#: src/slic3r/GUI/Field.cpp:207
msgid "parameter name"
msgstr "參數名稱"


#: src/slic3r/GUI/Field.cpp:240
#, possible-c-format
msgid "%s doesn't support percentage"
msgstr "%s 不支持百分比"


#: src/slic3r/GUI/Field.cpp:260 src/slic3r/GUI/Field.cpp:314
#: src/slic3r/GUI/Field.cpp:1617 src/slic3r/GUI/GUI_ObjectLayers.cpp:413
msgid "Invalid numeric input."
msgstr "無效的數字輸入。"


#: src/slic3r/GUI/Field.cpp:273 src/slic3r/GUI/Field.cpp:344
msgid "Parameter validation"
msgstr "參數驗證"


#: src/slic3r/GUI/Field.cpp:286 src/slic3r/GUI/Field.cpp:325
#: src/slic3r/GUI/Field.cpp:392 src/slic3r/GUI/Field.cpp:1629
msgid "Input value is out of range"
msgstr "輸入值超出範圍"


#: src/slic3r/GUI/FirmwareDialog.cpp:150
msgid "Flash!"
msgstr "燒錄！"


#: src/slic3r/GUI/FirmwareDialog.cpp:152
msgid "Flashing in progress. Please do not disconnect the printer!"
msgstr "燒錄正在進行中。請不要斷開印表機的連接!"


#: src/slic3r/GUI/FirmwareDialog.cpp:199
msgid "Flashing failed"
msgstr "燒錄失敗"


#: src/slic3r/GUI/FirmwareDialog.cpp:282
msgid "Flashing succeeded!"
msgstr "燒錄成功!"


#: src/slic3r/GUI/FirmwareDialog.cpp:283
msgid "Flashing failed. Please see the avrdude log below."
msgstr "燒錄失敗。請參見下面的日誌。"


#: src/slic3r/GUI/FirmwareDialog.cpp:284
msgid "Flashing cancelled."
msgstr "燒錄取消。"


#: src/slic3r/GUI/FirmwareDialog.cpp:332
#, possible-c-format
msgid ""
"This firmware hex file does not match the printer model.\n"
"The hex file is intended for: %s\n"
"Printer reported: %s\n"
"\n"
"Do you want to continue and flash this hex file anyway?\n"
"Please only continue if you are sure this is the right thing to do."
msgstr ""
"此固件十六進制文件與印表機型號不匹配。\n"
"十六進制文件用於: %s \n"
"印表機報告: %s  \n"
" \n"
"是否仍要繼續並燒錄此十六進制文件？\n"
"只有在你確定這是正確的做法的情況下才能繼續。"


#: src/slic3r/GUI/FirmwareDialog.cpp:419 src/slic3r/GUI/FirmwareDialog.cpp:454
#, possible-c-format
msgid ""
"Multiple %s devices found. Please only connect one at a time for flashing."
msgstr "找到多個 %s 設備。請一次只連接一個以進行燒錄。"


#: src/slic3r/GUI/FirmwareDialog.cpp:436
#, possible-c-format
msgid ""
"The %s device was not found.\n"
"If the device is connected, please press the Reset button next to the USB "
"connector ..."
msgstr ""
"找不到 %s 設備。\n"
"如果設備已連接, 請按 USB 連接器旁邊的 \"重置\" 按鈕…"


#: src/slic3r/GUI/FirmwareDialog.cpp:548
#, possible-c-format
msgid "The %s device could not have been found"
msgstr "找不到 %s 設備"


#: src/slic3r/GUI/FirmwareDialog.cpp:645
#, possible-c-format
msgid "Error accessing port at %s: %s"
msgstr "訪問 %s: %s 端口時出錯"


#: src/slic3r/GUI/FirmwareDialog.cpp:647
#, possible-c-format
msgid "Error: %s"
msgstr "錯誤: %s"


#: src/slic3r/GUI/FirmwareDialog.cpp:777
msgid "Firmware flasher"
msgstr "固件燒錄器"


#: src/slic3r/GUI/FirmwareDialog.cpp:802
msgid "Firmware image:"
msgstr "固件鏡像:"


#: src/slic3r/GUI/FirmwareDialog.cpp:805
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:324
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:399
msgid "Browse"
msgstr "瀏覽"


#: src/slic3r/GUI/FirmwareDialog.cpp:807
msgid "Serial port:"
msgstr "串行端口："


#: src/slic3r/GUI/FirmwareDialog.cpp:809
msgid "Autodetected"
msgstr "自動檢測"


#: src/slic3r/GUI/FirmwareDialog.cpp:810
msgid "Rescan"
msgstr "重新掃描"


#: src/slic3r/GUI/FirmwareDialog.cpp:817
msgid "Progress:"
msgstr "進度:"


#: src/slic3r/GUI/FirmwareDialog.cpp:820
msgid "Status:"
msgstr "狀態："


#: src/slic3r/GUI/FirmwareDialog.cpp:821
msgid "Ready"
msgstr "準備好了"


#: src/slic3r/GUI/FirmwareDialog.cpp:841
msgid "Advanced: Output log"
msgstr "高級: 輸出log日誌"


#: src/slic3r/GUI/FirmwareDialog.cpp:902
msgid ""
"Are you sure you want to cancel firmware flashing?\n"
"This could leave your printer in an unusable state!"
msgstr ""
"確實要取消韌體燒錄嗎？\n"
"這可能會使您的印表機處於無法使用的狀態!"


#: src/slic3r/GUI/FirmwareDialog.cpp:903
msgid "Confirmation"
msgstr "確認"


#: src/slic3r/GUI/FirmwareDialog.cpp:906
msgid "Cancelling..."
msgstr "正在取消...."


#: src/slic3r/GUI/FreeCADDialog.cpp:276 src/slic3r/GUI/GUI_ObjectList.cpp:1596
msgid "Load"
msgstr "加載"


#: src/slic3r/GUI/FreeCADDialog.cpp:279 src/slic3r/GUI/Plater.cpp:4876
#: src/slic3r/GUI/UnsavedChangesDialog.cpp:654
msgid "Save"
msgstr "保存"


#: src/slic3r/GUI/GCodeViewer.cpp:2442
msgid "from"
msgstr "從"


#: src/slic3r/GUI/GCodeViewer.cpp:2470 src/slic3r/GUI/GCodeViewer.cpp:2478
#: src/slic3r/GUI/GUI_Preview.cpp:244
msgid "Feature type"
msgstr "功能類型"


#: src/slic3r/GUI/GCodeViewer.cpp:2470 src/slic3r/GUI/GCodeViewer.cpp:2478
#: src/slic3r/GUI/RammingChart.cpp:76
msgid "Time"
msgstr "時間"


#: src/slic3r/GUI/GCodeViewer.cpp:2481
msgid "Height (mm)"
msgstr "高度（毫米）"


#: src/slic3r/GUI/GCodeViewer.cpp:2482
msgid "Width (mm)"
msgstr "寬度 (mm)"


#: src/slic3r/GUI/GCodeViewer.cpp:2483
msgid "Speed (mm/s)"
msgstr "回退速度(mm/s)"


#: src/slic3r/GUI/GCodeViewer.cpp:2489 src/slic3r/GUI/GUI_Preview.cpp:253
#: src/slic3r/GUI/GUI_Preview.cpp:955
msgid "Tool"
msgstr "工具"


#: src/slic3r/GUI/GCodeViewer.cpp:2490 src/slic3r/GUI/GCodeViewer.cpp:2539
#: src/slic3r/GUI/GCodeViewer.cpp:2837 src/slic3r/GUI/GCodeViewer.cpp:2867
#: src/slic3r/GUI/GUI_Preview.cpp:254 src/slic3r/GUI/Plater.cpp:695
msgid "Filament"
msgstr "線材"


#: src/slic3r/GUI/GCodeViewer.cpp:2491 src/slic3r/GUI/GUI_Preview.cpp:255
msgid "Color Print"
msgstr "彩色列印"


#: src/slic3r/GUI/GCodeViewer.cpp:2492 src/libslic3r/PrintConfig.cpp:3827
#: src/libslic3r/PrintConfig.cpp:3838
msgid "Temperature"
msgstr "溫度"


#: src/slic3r/GUI/GCodeViewer.cpp:2531 src/slic3r/GUI/GCodeViewer.cpp:2574
#: src/slic3r/GUI/GCodeViewer.cpp:2579 src/slic3r/GUI/GUI_ObjectList.cpp:322
#: src/slic3r/GUI/wxExtensions.cpp:543 src/libslic3r/PrintConfig.cpp:1040
msgid "Extruder"
msgstr "擠出頭"


#: src/slic3r/GUI/GCodeViewer.cpp:2688 src/slic3r/GUI/GCodeViewer.cpp:2713
msgid "Print"
msgstr "列印"


#: src/slic3r/GUI/GCodeViewer.cpp:2757 src/slic3r/GUI/GUI_Preview.cpp:1136
#: src/libslic3r/PrintConfig.cpp:4026
msgid "Travel"
msgstr "空程"


#: src/slic3r/GUI/GCodeViewer.cpp:2762 src/slic3r/GUI/Tab.cpp:2187
msgid "Retraction"
msgstr "回縮"


#: src/slic3r/GUI/GCodeViewer.cpp:2816 src/slic3r/GUI/GUI_Preview.cpp:1138
msgid "Retractions"
msgstr "回抽"


#: src/slic3r/GUI/GCodeViewer.cpp:2832 src/slic3r/GUI/GCodeViewer.cpp:2856
#: src/slic3r/GUI/Plater.cpp:698 src/libslic3r/PrintConfig.cpp:159
msgid "Printer"
msgstr "印表機"


#: src/slic3r/GUI/GCodeViewer.cpp:2834 src/slic3r/GUI/GCodeViewer.cpp:2861
#: src/slic3r/GUI/Plater.cpp:694
msgid "Print settings"
msgstr "列印設置"


#: src/slic3r/GUI/GCodeViewer.cpp:2892 src/slic3r/GUI/GCodeViewer.cpp:2897
#: src/slic3r/GUI/Plater.cpp:242 src/slic3r/GUI/Plater.cpp:1135
#: src/slic3r/GUI/Plater.cpp:1248
msgid "Estimated printing time"
msgstr "預計列印時間"


#: src/slic3r/GUI/GCodeViewer.cpp:2892
msgid "Normal mode"
msgstr "正常模式"


#: src/slic3r/GUI/GLCanvas3D.cpp:285 src/libslic3r/PrintConfig.cpp:1070
msgid "Radius"
msgstr "半徑"


#: src/slic3r/GUI/GLCanvas3D.cpp:4078 src/slic3r/GUI/GLCanvas3D.cpp:4527
#: src/slic3r/GUI/KBShortcutsDialog.cpp:120 src/slic3r/GUI/Plater.cpp:1677
msgid "Arrange"
msgstr "整理"


#: src/slic3r/GUI/GLCanvas3D.cpp:4509 src/slic3r/GUI/GUI_ObjectList.cpp:1897
#: src/slic3r/GUI/Plater.cpp:4121 src/slic3r/GUI/Plater.cpp:4145
#: src/slic3r/GUI/Tab.cpp:3655
msgid "Delete"
msgstr "刪除"


#: src/slic3r/GUI/GLCanvas3D.cpp:4518 src/slic3r/GUI/KBShortcutsDialog.cpp:88
#: src/slic3r/GUI/Plater.cpp:5291
msgid "Delete all"
msgstr "刪除所有"


#: src/slic3r/GUI/GLCanvas3D.cpp:4549
msgid "Copy"
msgstr "複製"


#: src/slic3r/GUI/GLCanvas3D.cpp:4604 src/slic3r/GUI/GUI_ObjectList.cpp:1669
msgid "Split to parts"
msgstr "拆分到零件"


#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:151 src/libslic3r/PrintConfig.cpp:6310
msgid "Cut"
msgstr "切割"


#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:185
msgid "Keep upper part"
msgstr "保留上半部分"


#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:186
msgid "Keep lower part"
msgstr "保留下半部分"


#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:187
msgid "Rotate lower part upwards"
msgstr "旋轉下部向上"


#: src/slic3r/GUI/Gizmos/GLGizmoCut.cpp:192
msgid "Perform cut"
msgstr "執行切割"


#: src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp:54
#: src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp:39
#: src/slic3r/GUI/GUI_ObjectList.cpp:1644
#: src/slic3r/GUI/GUI_ObjectList.cpp:1656
msgid "Sphere"
msgstr "球"


#: src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp:461
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:528
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:547
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:563
#: src/libslic3r/PrintConfig.cpp:6362
msgid "Rotate"
msgstr "旋轉"


#: src/slic3r/GUI/Gizmos/GLGizmoScale.cpp:78
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:238
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:548
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:564
#: src/libslic3r/PrintConfig.cpp:6377
msgid "Scale"
msgstr "縮放"


#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:47
msgid "Head diameter"
msgstr "列印頭直徑"


#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:48
msgid "Lock supports under new islands"
msgstr "在新的島之下鎖定支持"


#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:49
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1218
msgid "Remove selected points"
msgstr "刪除選定的點"


#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:50
msgid "Remove all points"
msgstr "刪除所有點"


#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:51
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1221
msgid "Apply changes"
msgstr "應用更改"


#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:52
#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1222
msgid "Discard changes"
msgstr "放棄更改"


#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:53
msgid "Minimal points distance"
msgstr "最小點距離"


#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:54
#: src/libslic3r/PrintConfig.cpp:4958
msgid "Support points density"
msgstr "支撐點密度"


#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:912
msgid "Save changes?"
msgstr "保存更改嗎？"


#: src/slic3r/GUI/Gizmos/GLGizmoSlaSupports.cpp:1129
#: src/slic3r/GUI/GUI.cpp:272 src/slic3r/GUI/PhysicalPrinterDialog.cpp:598
#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:622
#: src/slic3r/GUI/WipeTowerDialog.cpp:45
#: src/slic3r/GUI/WipeTowerDialog.cpp:366
msgid "Warning"
msgstr "警告"


#: src/slic3r/GUI/GUI_App.cpp:1239 src/slic3r/GUI/GUI_App.cpp:1250
msgid "Recreating"
msgstr "再造"


#: src/slic3r/GUI/GUI_App.cpp:1260
msgid "Loading of a mode view"
msgstr "載入模式視圖"


#: src/slic3r/GUI/GUI_App.cpp:1420
msgid "Choose one or more files (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "選擇一個或多個文件  (STL/OBJ/AMF/3MF/PRUSA):"


#: src/slic3r/GUI/GUI_App.cpp:1443
msgid "Changing of an application language"
msgstr "更改應用程序語言"


#: src/slic3r/GUI/GUI_App.cpp:1566
msgid "Select the language"
msgstr "選擇語言"


#: src/slic3r/GUI/GUI_App.cpp:1566
msgid "Language"
msgstr "語言"


#: src/slic3r/GUI/GUI_App.cpp:1715
msgid "modified"
msgstr "修改"


#: src/slic3r/GUI/GUI_App.cpp:1764
#, possible-c-format
msgid "Run %s"
msgstr "運行 %s"


#: src/slic3r/GUI/GUI_App.cpp:1768
msgid "&Configuration Snapshots"
msgstr "&配置快照"


#: src/slic3r/GUI/GUI_App.cpp:1768
msgid "Inspect / activate configuration snapshots"
msgstr "檢查/啟用配置快照"


#: src/slic3r/GUI/GUI_App.cpp:1769
msgid "Take Configuration &Snapshot"
msgstr "獲取配置和快照"


#: src/slic3r/GUI/GUI_App.cpp:1769
msgid "Capture a configuration snapshot"
msgstr "擷取配置快照"


#: src/slic3r/GUI/GUI_App.cpp:1773
msgid "&Preferences"
msgstr "&首選項"


#: src/slic3r/GUI/GUI_App.cpp:1779
msgid "Application preferences"
msgstr "應用程序首選項"


#: src/slic3r/GUI/GUI_App.cpp:1784 src/slic3r/GUI/wxExtensions.cpp:709
msgid "Simple"
msgstr "簡單"


#: src/slic3r/GUI/GUI_App.cpp:1784
msgid "Simple View Mode"
msgstr "簡單介面模式"


#: src/slic3r/GUI/GUI_App.cpp:1786
msgid "Advanced View Mode"
msgstr "高級介面模式"


#: src/slic3r/GUI/GUI_App.cpp:1787 src/slic3r/GUI/wxExtensions.cpp:712
msgid "Expert"
msgstr "專家"


#: src/slic3r/GUI/GUI_App.cpp:1787
msgid "Expert View Mode"
msgstr "專家介面模式"


#: src/slic3r/GUI/GUI_App.cpp:1792
msgid "Mode"
msgstr "模式"


#: src/slic3r/GUI/GUI_App.cpp:1798
msgid "Flash printer &firmware"
msgstr "燒錄印表機&固件"


#: src/slic3r/GUI/GUI_App.cpp:1798
msgid "Upload a firmware image into an Arduino based printer"
msgstr "將韌體鏡像檔上傳到基於 arduino 的印表機"


#: src/slic3r/GUI/GUI_App.cpp:1814
msgid "Taking configuration snapshot"
msgstr "創建配置快照"


#: src/slic3r/GUI/GUI_App.cpp:1814
msgid "Snapshot name"
msgstr "快照名稱"


#: src/slic3r/GUI/GUI_App.cpp:1924
msgid "&Configuration"
msgstr "&配置"


#: src/slic3r/GUI/GUI_App.cpp:2190 src/slic3r/GUI/Tab.cpp:3409
msgid "It's impossible to print multi-part object(s) with SLA technology."
msgstr "無法使用 SLA 技術列印多部分對象。"


#: src/slic3r/GUI/GUI_App.cpp:2191
msgid "Please check and fix your object list."
msgstr "請檢查並修復您的對象列表。"


#: src/slic3r/GUI/GUI_App.cpp:2192 src/slic3r/GUI/Jobs/SLAImportJob.cpp:210
#: src/slic3r/GUI/Plater.cpp:2447 src/slic3r/GUI/Tab.cpp:3411
msgid "Attention!"
msgstr "注意！"


#: src/slic3r/GUI/GUI_ObjectList.cpp:51
msgid "Add part"
msgstr "添加部件"


#: src/slic3r/GUI/GUI_ObjectList.cpp:52
msgid "Add modifier"
msgstr "添加修飾器"


#: src/slic3r/GUI/GUI_ObjectList.cpp:53
msgid "Add support enforcer"
msgstr "添加支撐執行者"


#: src/slic3r/GUI/GUI_ObjectList.cpp:54
msgid "Add support blocker"
msgstr "添加支撐屏蔽"


#: src/slic3r/GUI/GUI_ObjectList.cpp:310
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:161
msgid "Name"
msgstr "名稱"


#: src/slic3r/GUI/GUI_ObjectList.cpp:412
#, possible-c-format
msgid "Auto-repaired (%d errors):"
msgstr "自動修復 (%d 錯誤)::"


#: src/slic3r/GUI/GUI_ObjectList.cpp:419
msgid "degenerate facets"
msgstr "簡併平面"


#: src/slic3r/GUI/GUI_ObjectList.cpp:420
msgid "edges fixed"
msgstr "修復邊緣"


#: src/slic3r/GUI/GUI_ObjectList.cpp:421
msgid "facets removed"
msgstr "已移除平面"


#: src/slic3r/GUI/GUI_ObjectList.cpp:422
msgid "facets added"
msgstr "已添加平面"


#: src/slic3r/GUI/GUI_ObjectList.cpp:423
msgid "facets reversed"
msgstr "已反轉平面"


#: src/slic3r/GUI/GUI_ObjectList.cpp:424
msgid "backwards edges"
msgstr "反向邊緣"


#: src/slic3r/GUI/GUI_ObjectList.cpp:432
msgid "Right button click the icon to fix STL through Netfabb"
msgstr "右按鈕單擊圖標, 通過 Netfabb 修復 STL"


#: src/slic3r/GUI/GUI_ObjectList.cpp:469
msgid "Right button click the icon to change the object settings"
msgstr "右鍵單擊圖標以更改對象設置"


#: src/slic3r/GUI/GUI_ObjectList.cpp:600
msgid "Change Extruder"
msgstr "更換擠出機"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1340
#: src/slic3r/GUI/GUI_ObjectList.cpp:1712
#: src/slic3r/GUI/GUI_ObjectList.cpp:1718
#: src/slic3r/GUI/GUI_ObjectList.cpp:2101
#, possible-c-format
msgid "Quick Add Settings (%s)"
msgstr "快速添加設置 (%s)"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1434
msgid "Select showing settings"
msgstr "選擇顯示的設置"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1636
#: src/slic3r/GUI/GUI_ObjectList.cpp:1640
msgid "Box"
msgstr "盒子"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1691
msgid "Add settings"
msgstr "添加設置"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1769
msgid "Change type"
msgstr "更改類型"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1779
#: src/slic3r/GUI/GUI_ObjectList.cpp:1791
msgid "Set as a Separated Object"
msgstr "設置爲分隔的對象"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1791
msgid "Set as a Separated Objects"
msgstr "設置爲分隔的對象"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1816
msgid "Rename"
msgstr "重命名"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1827
msgid "Fix through the Netfabb"
msgstr "通過 Netfabb 修復"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1837 src/slic3r/GUI/Plater.cpp:4158
msgid "Export as STL"
msgstr "導出爲 STL"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1851
msgid "Set extruder for selected items"
msgstr "爲所選項目設置擠出機"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1883 src/slic3r/Utils/Repetier.cpp:124
#: src/slic3r/Utils/Repetier.cpp:203 src/libslic3r/PrintConfig.cpp:618
#: src/libslic3r/PrintConfig.cpp:802 src/libslic3r/PrintConfig.cpp:1780
#: src/libslic3r/PrintConfig.cpp:2889 src/libslic3r/PrintConfig.cpp:3786
msgid "Default"
msgstr "默認"


#: src/slic3r/GUI/GUI_ObjectList.cpp:1963
#: src/slic3r/GUI/GUI_ObjectList.cpp:1971
#: src/slic3r/GUI/GUI_ObjectList.cpp:2661 src/libslic3r/PrintConfig.cpp:6353
msgid "Merge"
msgstr "合併"


#: src/slic3r/GUI/GUI_ObjectList.cpp:2528 src/slic3r/GUI/Plater.cpp:2968
msgid ""
"The selected object couldn't be split because it contains only one part."
msgstr "無法拆分所選對象, 因爲它只包含一個部分。"


#: src/slic3r/GUI/GUI_ObjectList.cpp:2532
msgid "Split to Parts"
msgstr "拆分到零件"


#: src/slic3r/GUI/GUI_ObjectList.cpp:2938
msgid "Group manipulation"
msgstr "操作組"


#: src/slic3r/GUI/GUI_ObjectList.cpp:2950
msgid "Object manipulation"
msgstr "操作對象"


#: src/slic3r/GUI/GUI_ObjectList.cpp:2963
msgid "Object Settings to modify"
msgstr "要修改的對象設置"


#: src/slic3r/GUI/GUI_ObjectList.cpp:2967
msgid "Part Settings to modify"
msgstr "要修改的零件設置"


#: src/slic3r/GUI/GUI_ObjectList.cpp:2978
msgid "Part manipulation"
msgstr "零件操作"


#: src/slic3r/GUI/GUI_ObjectList.cpp:2984
msgid "Instance manipulation"
msgstr "實例操作"


#: src/slic3r/GUI/GUI_ObjectList.cpp:3363
msgid "Delete Selected"
msgstr "刪除所選"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4039
msgid "Object or Instance"
msgstr "對象或實例"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4040
#: src/slic3r/GUI/GUI_ObjectList.cpp:4173
msgid "Part"
msgstr "部件"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4042
msgid "Unsupported selection"
msgstr "不支持的選擇"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4043
#, possible-c-format
msgid "You started your selection with %s Item."
msgstr "您使用 %s 項開始選擇。"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4044
#, possible-c-format
msgid "In this mode you can select only other %s Items%s"
msgstr "在此模式下, 您只能選擇其他 %s 項目 %s"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4047
msgid "of a current Object"
msgstr "當前對象的"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4052
#: src/slic3r/GUI/GUI_ObjectList.cpp:4127 src/slic3r/GUI/Plater.cpp:143
msgid "Info"
msgstr "信息"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4168
msgid "You can't change a type of the last solid part of the object."
msgstr "不能更改對象的最後一個實體部分的類型。"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4175
msgid "Select type of part"
msgstr "選擇零件類型"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4425
msgid "Enter new name"
msgstr "輸入新名稱"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4425
msgid "Renaming"
msgstr "重命名"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4441
#: src/slic3r/GUI/GUI_ObjectList.cpp:4568
#: src/slic3r/GUI/SavePresetDialog.cpp:101
#: src/slic3r/GUI/SavePresetDialog.cpp:109
msgid "The supplied name is not valid;"
msgstr "提供的名稱無效;"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4442
#: src/slic3r/GUI/GUI_ObjectList.cpp:4569
#: src/slic3r/GUI/SavePresetDialog.cpp:102
msgid "the following characters are not allowed:"
msgstr "不允許使用以下字符:"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4617
msgid "Select extruder number:"
msgstr "選擇擠出機編號:"


#: src/slic3r/GUI/GUI_ObjectList.cpp:4618
msgid "This extruder will be set for selected items"
msgstr "將爲選定的項目設置此擠出機"


#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:163 src/libslic3r/GCode.cpp:588
msgid "Object name"
msgstr "對象名稱"


#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:223
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:506
msgid "Position"
msgstr "位置"


#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:224
#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:507
#: src/slic3r/GUI/Mouse3DController.cpp:486
#: src/slic3r/GUI/Mouse3DController.cpp:507
msgid "Rotation"
msgstr "旋轉"


#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:508
msgid "Scale factors"
msgstr "縮放比例因子"


#: src/slic3r/GUI/GUI_ObjectManipulation.cpp:562
msgid "Translate"
msgstr "翻譯"


#: src/slic3r/GUI/GUI_ObjectSettings.cpp:62
msgid "Additional Settings"
msgstr "其他設置"


#: src/slic3r/GUI/GUI_Preview.cpp:242
msgid "View"
msgstr "查看"


#: src/slic3r/GUI/GUI_Preview.cpp:245 src/libslic3r/PrintConfig.cpp:1057
msgid "Height"
msgstr "高度"


#: src/slic3r/GUI/GUI_Preview.cpp:246 src/libslic3r/PrintConfig.cpp:1686
#: src/libslic3r/PrintConfig.cpp:4178
msgid "Width"
msgstr "寬度"


#: src/slic3r/GUI/GUI_Preview.cpp:247 src/libslic3r/PrintConfig.cpp:3261
msgid "Speed"
msgstr "速度"


#: src/slic3r/GUI/GUI_Preview.cpp:248 src/slic3r/GUI/PresetHints.cpp:41
msgid "Fan"
msgstr "風扇"


#: src/slic3r/GUI/GUI_Preview.cpp:248
msgid "Fan speed"
msgstr "風扇速度"


#: src/slic3r/GUI/GUI_Preview.cpp:249
msgid "time"
msgstr "時間"


#: src/slic3r/GUI/GUI_Preview.cpp:252
msgid "Volumetric flow rate"
msgstr "體積流量"


#: src/slic3r/GUI/GUI_Preview.cpp:255 src/slic3r/GUI/Plater.cpp:1163
#: src/slic3r/GUI/Plater.cpp:1167 src/slic3r/GUI/Plater.cpp:1182
#: src/slic3r/GUI/Plater.cpp:1187 src/libslic3r/PrintConfig.cpp:83
#: src/libslic3r/PrintConfig.cpp:1202
msgid "Color"
msgstr "顏色"


#: src/slic3r/GUI/GUI_Preview.cpp:261
msgid "Show"
msgstr "顯示"


#: src/slic3r/GUI/GUI_Preview.cpp:263 src/slic3r/GUI/GUI_Preview.cpp:284
msgid "Feature types"
msgstr "功能類型"


#: src/slic3r/GUI/GUI_Preview.cpp:267 src/libslic3r/ExtrusionEntity.cpp:271
#: src/libslic3r/ExtrusionEntity.cpp:298
msgid "Perimeter"
msgstr "周長"


#: src/slic3r/GUI/GUI_Preview.cpp:268 src/libslic3r/ExtrusionEntity.cpp:272
#: src/libslic3r/ExtrusionEntity.cpp:300
msgid "External perimeter"
msgstr "外部輪廓"


#: src/slic3r/GUI/GUI_Preview.cpp:269 src/libslic3r/ExtrusionEntity.cpp:273
#: src/libslic3r/ExtrusionEntity.cpp:302
msgid "Overhang perimeter"
msgstr "懸空輪廓"


#: src/slic3r/GUI/GUI_Preview.cpp:270 src/libslic3r/ExtrusionEntity.cpp:274
#: src/libslic3r/ExtrusionEntity.cpp:304
msgid "Internal infill"
msgstr "內部填充"


#: src/slic3r/GUI/GUI_Preview.cpp:271 src/libslic3r/ExtrusionEntity.cpp:275
#: src/libslic3r/ExtrusionEntity.cpp:306 src/libslic3r/PrintConfig.cpp:3384
msgid "Solid infill"
msgstr "實心填充"


#: src/slic3r/GUI/GUI_Preview.cpp:272 src/libslic3r/ExtrusionEntity.cpp:276
#: src/libslic3r/ExtrusionEntity.cpp:308 src/libslic3r/PrintConfig.cpp:3961
msgid "Top solid infill"
msgstr "頂部實心填充"


#: src/slic3r/GUI/GUI_Preview.cpp:273 src/libslic3r/ExtrusionEntity.cpp:278
#: src/libslic3r/ExtrusionEntity.cpp:312
msgid "Bridge infill"
msgstr "搭橋填充"


#: src/slic3r/GUI/GUI_Preview.cpp:276 src/libslic3r/ExtrusionEntity.cpp:281
#: src/libslic3r/ExtrusionEntity.cpp:318 src/libslic3r/PrintConfig.cpp:1863
msgid "Gap fill"
msgstr "間隙填充"


#: src/slic3r/GUI/GUI_Preview.cpp:277 src/libslic3r/ExtrusionEntity.cpp:282
#: src/libslic3r/ExtrusionEntity.cpp:320 src/libslic3r/PrintConfig.cpp:3220
msgid "Skirt"
msgstr "裙邊"


#: src/slic3r/GUI/GUI_Preview.cpp:278 src/libslic3r/ExtrusionEntity.cpp:283
#: src/libslic3r/ExtrusionEntity.cpp:322 src/libslic3r/PrintConfig.cpp:3679
msgid "Support material"
msgstr "支撐材料"


#: src/slic3r/GUI/GUI_Preview.cpp:279 src/libslic3r/ExtrusionEntity.cpp:284
#: src/libslic3r/ExtrusionEntity.cpp:324
msgid "Support material interface"
msgstr "支持材料端口"


#: src/slic3r/GUI/GUI_Preview.cpp:280 src/libslic3r/ExtrusionEntity.cpp:285
#: src/libslic3r/ExtrusionEntity.cpp:326
msgid "Wipe tower"
msgstr "擦料塔"


#: src/slic3r/GUI/GUI_Preview.cpp:1144
msgid "Shells"
msgstr "殼"


#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:146
msgid "Arranging"
msgstr "自動佈局"


#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:177
msgid "Could not arrange model objects! Some geometries may be invalid."
msgstr "無法排列模型對象!某些幾何形狀可能無效。"


#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:183
msgid "Arranging canceled."
msgstr "佈局已取消."


#: src/slic3r/GUI/Jobs/ArrangeJob.cpp:184
msgid "Arranging done."
msgstr "佈局完成."


#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:41
msgid "Searching for optimal orientation"
msgstr "尋找最佳方向"


#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:73
msgid "Orientation search canceled."
msgstr "方向搜索已取消."


#: src/slic3r/GUI/Jobs/RotoptimizeJob.cpp:74
msgid "Orientation found."
msgstr "找到方向。"


#: src/slic3r/GUI/Jobs/SLAImportJob.cpp:209 src/slic3r/GUI/Plater.cpp:2446
#: src/slic3r/GUI/Tab.cpp:3410
msgid "Please check your object list before preset changing."
msgstr "在預設更改之前, 請檢查對象列表。"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:17 src/slic3r/GUI/MainFrame.cpp:1108
msgid "Keyboard Shortcuts"
msgstr "鍵盤快捷鍵"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:71
msgid "Save project (3mf)"
msgstr "保存項目 (3MF)"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:73
msgid "(Re)slice"
msgstr "重新切片"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:79 src/slic3r/GUI/Plater.cpp:771
#: src/slic3r/GUI/Plater.cpp:6255 src/libslic3r/PrintConfig.cpp:6255
msgid "Export G-code"
msgstr "導出 G-code"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:80 src/slic3r/GUI/Plater.cpp:6256
msgid "Send G-code"
msgstr "發送 G 代碼"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:85
msgid "Select all objects"
msgstr "選擇所有對象"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:87
msgid "Delete selected"
msgstr "刪除所選"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:103
msgid "Select Print Settings Tab"
msgstr "選擇 \"列印設置\" 選項卡"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:104
msgid "Select Filament Settings Tab"
msgstr "選擇 \"耗材設置\" 選項卡"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:105
msgid "Select Printer Settings Tab"
msgstr "選擇 \"印表機設置\" 選項卡"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:106
#: src/slic3r/GUI/PrintHostDialogs.cpp:178
msgid "Print host upload queue"
msgstr "列印主機上傳隊列"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:109
msgid "Camera view"
msgstr "相機視圖"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:112 src/slic3r/GUI/Preferences.cpp:13
msgid "Preferences"
msgstr "首選項"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:114
msgid "Show keyboard shortcuts list"
msgstr "顯示鍵盤快捷鍵列表"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:127
#: src/slic3r/GUI/KBShortcutsDialog.cpp:196
#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
#: src/slic3r/GUI/KBShortcutsDialog.cpp:219
#: src/slic3r/GUI/KBShortcutsDialog.cpp:226
#: src/slic3r/GUI/KBShortcutsDialog.cpp:243
msgid "Arrow Up"
msgstr "上箭頭"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:128
#: src/slic3r/GUI/KBShortcutsDialog.cpp:197
#: src/slic3r/GUI/KBShortcutsDialog.cpp:208
#: src/slic3r/GUI/KBShortcutsDialog.cpp:220
#: src/slic3r/GUI/KBShortcutsDialog.cpp:227
#: src/slic3r/GUI/KBShortcutsDialog.cpp:244
msgid "Arrow Down"
msgstr "上箭頭"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:129
#: src/slic3r/GUI/KBShortcutsDialog.cpp:198
#: src/slic3r/GUI/KBShortcutsDialog.cpp:221
#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
#: src/slic3r/GUI/KBShortcutsDialog.cpp:241
#: src/slic3r/GUI/KBShortcutsDialog.cpp:246
msgid "Arrow Left"
msgstr "左箭頭"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:130
#: src/slic3r/GUI/KBShortcutsDialog.cpp:199
#: src/slic3r/GUI/KBShortcutsDialog.cpp:222
#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
#: src/slic3r/GUI/KBShortcutsDialog.cpp:242
#: src/slic3r/GUI/KBShortcutsDialog.cpp:247
msgid "Arrow Right"
msgstr "右箭頭"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:135
msgid "Gizmo move"
msgstr "線框移動"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:136
msgid "Gizmo scale"
msgstr "線框縮放"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:137
msgid "Gizmo rotate"
msgstr "旋轉小物件"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:138
msgid "Gizmo cut"
msgstr "剪切小物件"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:139
msgid "Gizmo Place face on bed"
msgstr "放置小物件面到熱牀"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:141
msgid "Gizmo SLA support points"
msgstr "小物件SLA支撐點"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:144
msgid "Zoom to Bed"
msgstr "縮放至熱牀"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:146
msgid "Zoom in"
msgstr "放大"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:147
msgid "Zoom out"
msgstr "縮小"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:167 src/slic3r/GUI/MainFrame.cpp:373
#: src/slic3r/GUI/MainFrame.cpp:458
msgid "Plater"
msgstr "佈局器"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:207
msgid "Upper layer"
msgstr "高層"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:208
msgid "Lower layer"
msgstr "低層"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:209
msgid "Upper Layer"
msgstr "高層"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:210
msgid "Lower Layer"
msgstr "低層"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:215 src/slic3r/GUI/Plater.cpp:4323
msgid "Preview"
msgstr "預覽"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:223
#: src/slic3r/GUI/KBShortcutsDialog.cpp:230
msgid "Add color change marker for current layer"
msgstr "添加當前圖層的顏色更改標記"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:224
#: src/slic3r/GUI/KBShortcutsDialog.cpp:231
msgid "Delete color change marker for current layer"
msgstr "刪除當前圖層的顏色更改標記"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:228
msgid "Set upper thumb to current slider thumb"
msgstr "將上拇指設置爲當前滑塊拇指"


#: src/slic3r/GUI/KBShortcutsDialog.cpp:229
msgid "Set lower thumb to current slider thumb"
msgstr "將下拇指設置爲當前滑塊拇指"


#: src/slic3r/GUI/MainFrame.cpp:1080
msgid "Open the Slic3r website in your browser"
msgstr "在瀏覽器中打開 Slic3r 網站"


#: src/slic3r/GUI/MainFrame.cpp:1087
msgid "Open the Slic3r Manual in your browser"
msgstr "在瀏覽器中打開 Slic3r 手冊"


#: src/slic3r/GUI/MainFrame.cpp:1093
msgid "System &Info"
msgstr "系統&信息"


#: src/slic3r/GUI/MainFrame.cpp:1093
msgid "Show system information"
msgstr "顯示系統信息"


#: src/slic3r/GUI/MainFrame.cpp:1095
msgid "Show &Configuration Folder"
msgstr "顯示&配置文件夾"


#: src/slic3r/GUI/MainFrame.cpp:1095
msgid "Show user configuration folder (datadir)"
msgstr "顯示用戶配置文件夾 (datadir)"


#: src/slic3r/GUI/MainFrame.cpp:1097
msgid "Report an I&ssue"
msgstr "報告&問題"


#: src/slic3r/GUI/MainFrame.cpp:1101 src/slic3r/GUI/MainFrame.cpp:1104
msgid "Show about dialog"
msgstr "關於對話框"


#: src/slic3r/GUI/MainFrame.cpp:1108
msgid "Show the list of the keyboard shortcuts"
msgstr "顯示鍵盤快捷鍵的列表"


#: src/slic3r/GUI/MainFrame.cpp:1122
msgid "Iso"
msgstr "Iso"


#: src/slic3r/GUI/MainFrame.cpp:1122
msgid "Iso View"
msgstr "Iso 視圖"


#. TRN To be shown in the main menu View->Top
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1126 src/libslic3r/PrintConfig.cpp:706
#: src/libslic3r/PrintConfig.cpp:3630 src/libslic3r/PrintConfig.cpp:4005
#: src/libslic3r/PrintConfig.cpp:4015
msgid "Top"
msgstr "頂部"


#: src/slic3r/GUI/MainFrame.cpp:1126
msgid "Top View"
msgstr "頂視圖"


#. TRN To be shown in the main menu View->Bottom
#. TRN To be shown in Print Settings "Bottom solid layers"
#. TRN To be shown in Print Settings "Top solid layers"
#: src/slic3r/GUI/MainFrame.cpp:1129 src/libslic3r/PrintConfig.cpp:284
#: src/libslic3r/PrintConfig.cpp:292 src/libslic3r/PrintConfig.cpp:737
#: src/libslic3r/PrintConfig.cpp:3645
msgid "Bottom"
msgstr "底部"


#: src/slic3r/GUI/MainFrame.cpp:1129
msgid "Bottom View"
msgstr "底部視圖"


#: src/slic3r/GUI/MainFrame.cpp:1131
msgid "Front"
msgstr "前面"


#: src/slic3r/GUI/MainFrame.cpp:1131
msgid "Front View"
msgstr "正視圖"


#: src/slic3r/GUI/MainFrame.cpp:1133 src/libslic3r/PrintConfig.cpp:989
#: src/libslic3r/PrintConfig.cpp:3152
msgid "Rear"
msgstr "背面"


#: src/slic3r/GUI/MainFrame.cpp:1133
msgid "Rear View"
msgstr "後視圖"


#: src/slic3r/GUI/MainFrame.cpp:1135
msgid "Left"
msgstr "左"


#: src/slic3r/GUI/MainFrame.cpp:1135
msgid "Left View"
msgstr "左視圖"


#: src/slic3r/GUI/MainFrame.cpp:1137
msgid "Right"
msgstr "右"


#: src/slic3r/GUI/MainFrame.cpp:1137
msgid "Right View"
msgstr "右視圖"


#: src/slic3r/GUI/MainFrame.cpp:1153
msgid "&Open Project"
msgstr "&打開項目"


#: src/slic3r/GUI/MainFrame.cpp:1153
msgid "Open a project file"
msgstr "打開項目文件"


#: src/slic3r/GUI/MainFrame.cpp:1167 src/slic3r/GUI/MainFrame.cpp:1599
#: src/slic3r/GUI/PrintHostDialogs.cpp:276
msgid "Error"
msgstr "錯誤"


#: src/slic3r/GUI/MainFrame.cpp:1192
msgid "&Save Project"
msgstr "&保存項目"


#: src/slic3r/GUI/MainFrame.cpp:1192
msgid "Save current project file"
msgstr "將當前項目文件另存爲"


#: src/slic3r/GUI/MainFrame.cpp:1196 src/slic3r/GUI/MainFrame.cpp:1198
msgid "Save Project &as"
msgstr "保存項目 &爲"


#: src/slic3r/GUI/MainFrame.cpp:1196 src/slic3r/GUI/MainFrame.cpp:1198
msgid "Save current project file as"
msgstr "將當前項目文件另存爲"


#: src/slic3r/GUI/MainFrame.cpp:1206
msgid "Import STL/OBJ/AM&F/3MF"
msgstr "導入 STL/OBJ/AM&F/3MF"


#: src/slic3r/GUI/MainFrame.cpp:1206
msgid "Load a model"
msgstr "加載模型"


#: src/slic3r/GUI/MainFrame.cpp:1219
msgid "Import &Config"
msgstr "導入&配置"


#: src/slic3r/GUI/MainFrame.cpp:1219
msgid "Load exported configuration file"
msgstr "加載導出的配置文件"


#: src/slic3r/GUI/MainFrame.cpp:1222
msgid "Import Config from &project"
msgstr "從 &項目 導入配置"


#: src/slic3r/GUI/MainFrame.cpp:1222
msgid "Load configuration from project file"
msgstr "從項目文件加載配置"


#: src/slic3r/GUI/MainFrame.cpp:1226
msgid "Import Config &Bundle"
msgstr "導入配置&組"


#: src/slic3r/GUI/MainFrame.cpp:1226
msgid "Load presets from a bundle"
msgstr "從包加載預設"


#: src/slic3r/GUI/MainFrame.cpp:1229
msgid "&Import"
msgstr "&導入"


#: src/slic3r/GUI/MainFrame.cpp:1232 src/slic3r/GUI/MainFrame.cpp:1561
msgid "Export &G-code"
msgstr "導出 &G-code"


#: src/slic3r/GUI/MainFrame.cpp:1232
msgid "Export current plate as G-code"
msgstr "將當佈局板導出爲 G-code"


#: src/slic3r/GUI/MainFrame.cpp:1244
msgid "Export plate as &STL"
msgstr "導出佈局板爲 &STL"


#: src/slic3r/GUI/MainFrame.cpp:1244
msgid "Export current plate as STL"
msgstr "將當前佈局板導出爲 STL"


#: src/slic3r/GUI/MainFrame.cpp:1250
msgid "Export plate as &AMF"
msgstr "導出佈局板爲 &AMF"


#: src/slic3r/GUI/MainFrame.cpp:1250
msgid "Export current plate as AMF"
msgstr "將當佈局板導出爲 AMF"


#: src/slic3r/GUI/MainFrame.cpp:1258
msgid "Export &Config"
msgstr "導出&配置"


#: src/slic3r/GUI/MainFrame.cpp:1258
msgid "Export current configuration to file"
msgstr "將當前配置導出到文件"


#: src/slic3r/GUI/MainFrame.cpp:1261
msgid "Export Config &Bundle"
msgstr "導出配置&包"


#: src/slic3r/GUI/MainFrame.cpp:1261
msgid "Export all presets to file"
msgstr "將所有預設導出到文件"


#: src/slic3r/GUI/MainFrame.cpp:1271
msgid "&Export"
msgstr "導出(&E)"


#: src/slic3r/GUI/MainFrame.cpp:1281
msgid "Quick Slice"
msgstr "快速切片"


#: src/slic3r/GUI/MainFrame.cpp:1281
msgid "Slice a file into a G-code"
msgstr "將文件切片成 G-code"


#: src/slic3r/GUI/MainFrame.cpp:1287
msgid "Quick Slice and Save As"
msgstr "快速切片並另存爲"


#: src/slic3r/GUI/MainFrame.cpp:1287
msgid "Slice a file into a G-code, save as"
msgstr "將文件切片成  G-code, 並另存爲"


#: src/slic3r/GUI/MainFrame.cpp:1293
msgid "Repeat Last Quick Slice"
msgstr "重複上一個快速切片"


#: src/slic3r/GUI/MainFrame.cpp:1293
msgid "Repeat last quick slice"
msgstr "重複上一個快速切片"


#: src/slic3r/GUI/MainFrame.cpp:1301
msgid "Start new slicing process"
msgstr "開始新的切片流程"


#: src/slic3r/GUI/MainFrame.cpp:1305
msgid "&Repair STL file"
msgstr "&修復 STL 文件"


#: src/slic3r/GUI/MainFrame.cpp:1305
msgid "Automatically repair an STL file"
msgstr "自動修復 STL 文件"


#: src/slic3r/GUI/MainFrame.cpp:1312 src/slic3r/GUI/MainFrame.cpp:1520
msgid "&Quit"
msgstr "&退出"


#: src/slic3r/GUI/MainFrame.cpp:1327
msgid "&Select all"
msgstr "&選擇所有"


#: src/slic3r/GUI/MainFrame.cpp:1328
msgid "Selects all objects"
msgstr "選擇所有對象"


#: src/slic3r/GUI/MainFrame.cpp:1334
msgid "&Delete selected"
msgstr "&刪除所選"


#: src/slic3r/GUI/MainFrame.cpp:1335
msgid "Deletes the current selection"
msgstr "刪除當前所選內容"


#: src/slic3r/GUI/MainFrame.cpp:1337
msgid "Delete &all"
msgstr "刪除&所有"


#: src/slic3r/GUI/MainFrame.cpp:1338
msgid "Deletes all objects"
msgstr "刪除所有對象"


#: src/slic3r/GUI/MainFrame.cpp:1389
msgid "P&rint Settings Tab"
msgstr "&列印設置選項卡"


#: src/slic3r/GUI/MainFrame.cpp:1389
msgid "Show the print settings"
msgstr "顯示列印設置"


#: src/slic3r/GUI/MainFrame.cpp:1392 src/slic3r/GUI/MainFrame.cpp:1564
msgid "&Filament Settings Tab"
msgstr "&線材設置選項卡"


#: src/slic3r/GUI/MainFrame.cpp:1392
msgid "Show the filament settings"
msgstr "顯示耗材設置"


#: src/slic3r/GUI/MainFrame.cpp:1396
msgid "Print&er Settings Tab"
msgstr "&印表機設置選項卡"


#: src/slic3r/GUI/MainFrame.cpp:1396
msgid "Show the printer settings"
msgstr "顯示印表機設置"


#: src/slic3r/GUI/MainFrame.cpp:1402
msgid "Print &Host Upload Queue"
msgstr "列印&主機上載隊列"


#: src/slic3r/GUI/MainFrame.cpp:1402
msgid "Display the Print Host Upload Queue window"
msgstr "顯示 \"列印主機上載隊列\" 窗口"


#: src/slic3r/GUI/MainFrame.cpp:1470 src/slic3r/GUI/MainFrame.cpp:1535
msgid "&File"
msgstr "&文件"


#: src/slic3r/GUI/MainFrame.cpp:1471
msgid "&Edit"
msgstr "&編輯"


#: src/slic3r/GUI/MainFrame.cpp:1472
msgid "&Window"
msgstr "&窗口"


#: src/slic3r/GUI/MainFrame.cpp:1473 src/slic3r/GUI/MainFrame.cpp:1536
msgid "&View"
msgstr "&視圖"


#: src/slic3r/GUI/MainFrame.cpp:1478 src/slic3r/GUI/MainFrame.cpp:1539
msgid "&Help"
msgstr "&幫助"


#: src/slic3r/GUI/MainFrame.cpp:1587
msgid "Choose a file to slice (STL/OBJ/AMF/3MF/PRUSA):"
msgstr "選擇要切片的文件(STL/OBJ/AMF/3MF/PRUSA):"


#: src/slic3r/GUI/MainFrame.cpp:1598
msgid "No previously sliced file."
msgstr "沒有預切片的文件。"


#: src/slic3r/GUI/MainFrame.cpp:1604
msgid "Previously sliced file ("
msgstr "預切片文件 ("


#: src/slic3r/GUI/MainFrame.cpp:1604
msgid ") not found."
msgstr ") 無法找到。"


#: src/slic3r/GUI/MainFrame.cpp:1605
msgid "File Not Found"
msgstr "文件未找到"


#: src/slic3r/GUI/MainFrame.cpp:1640
msgid "SVG"
msgstr "SVG"


#: src/slic3r/GUI/MainFrame.cpp:1640
msgid "G-code"
msgstr "G-code"


#: src/slic3r/GUI/MainFrame.cpp:1652
msgid "Save zip file as:"
msgstr "將 zip 文件另存爲:"


#: src/slic3r/GUI/MainFrame.cpp:1661 src/slic3r/GUI/Plater.cpp:3113
#: src/slic3r/GUI/Plater.cpp:5782 src/slic3r/GUI/Tab.cpp:4352
msgid "Slicing"
msgstr "切片"


#: src/slic3r/GUI/MainFrame.cpp:1688
msgid "Slicing Done!"
msgstr "切片完成!"


#: src/slic3r/GUI/MainFrame.cpp:1703
msgid "Select the STL file to repair:"
msgstr "選擇要修復的 STL 文件:"


#: src/slic3r/GUI/MainFrame.cpp:1713
msgid "Save OBJ file (less prone to coordinate errors than STL) as:"
msgstr "將 OBJ 文件 (不像 STL 那樣容易發生座標錯誤) 保存爲:"


#: src/slic3r/GUI/MainFrame.cpp:1725
msgid "Your file was repaired."
msgstr "您的文件已修復。"


#: src/slic3r/GUI/MainFrame.cpp:1725 src/libslic3r/PrintConfig.cpp:6358
msgid "Repair"
msgstr "修復"


#: src/slic3r/GUI/MainFrame.cpp:1739
msgid "Save configuration as:"
msgstr "將配置另存爲:"


#: src/slic3r/GUI/MainFrame.cpp:1758 src/slic3r/GUI/MainFrame.cpp:1820
msgid "Select configuration to load:"
msgstr "選擇要加載的配置:"


#: src/slic3r/GUI/MainFrame.cpp:1794
msgid "Save presets bundle as:"
msgstr "將預設包保存爲:"


#: src/slic3r/GUI/MainFrame.cpp:1841
#, possible-c-format
msgid "%d presets successfully imported."
msgstr "%d 預設已成功導入。"


#: src/slic3r/GUI/Mouse3DController.cpp:477
msgid "Speed:"
msgstr "速度:"


#: src/slic3r/GUI/NotificationManager.hpp:474
msgid "Configuration update is available."
msgstr "配置更新可用."


#: src/slic3r/GUI/ObjectDataViewModel.cpp:69 src/slic3r/GUI/Tab.cpp:4197
#: src/slic3r/GUI/Tab.cpp:4281
msgid "Layers"
msgstr "圖層"


#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:205
msgid "Print Host upload"
msgstr "列印主機上傳隊列"


#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:337
msgid "Test"
msgstr "測試"


#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:342
msgid "Could not get a valid Printer Host reference"
msgstr "無法獲取有效的印表機主機引用"


#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:354
msgid "Success!"
msgstr "成功！"


#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:391
msgid ""
"HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
"signed certificate."
msgstr ""
"HTTPS CA 文件是可選的。只有在使用帶有自簽名證書的 HTTPS 時, 才需要使用它。"


#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:401
msgid "Certificate files (*.crt, *.pem)|*.crt;*.pem|All files|*.*"
msgstr "證書文件 (*.crt, *.pem)|*.crt;*.pem|All files|*.*"


#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:402
msgid "Open CA certificate file"
msgstr "打開 CA 證書文件"


#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:431
#, possible-c-format
msgid ""
"On this system, %s uses HTTPS certificates from the system Certificate Store "
"or Keychain."
msgstr ""
"在此係統上, %s 使用來自系統證書存儲或鑰匙串的 https 證書。"


#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:432
msgid ""
"To use a custom CA file, please import your CA file into Certificate Store / "
"Keychain."
msgstr ""
"要使用自定義 CA 文件, 請將 CA 文件導入到證書存儲/鑰匙串。"


#: src/slic3r/GUI/PhysicalPrinterDialog.cpp:584
msgid "The supplied name is empty. It can't be saved."
msgstr "提供的名稱爲空。無法保存。"


#: src/slic3r/GUI/Plater.cpp:163
msgid "Volume"
msgstr "體積"


#: src/slic3r/GUI/Plater.cpp:164
msgid "Facets"
msgstr "平面"


#: src/slic3r/GUI/Plater.cpp:165
msgid "Materials"
msgstr "材料"


#: src/slic3r/GUI/Plater.cpp:168
msgid "Manifold"
msgstr "流形"


#: src/slic3r/GUI/Plater.cpp:218
msgid "Sliced Info"
msgstr "切片信息"


#: src/slic3r/GUI/Plater.cpp:237 src/slic3r/GUI/Plater.cpp:1151
msgid "Used Filament (m)"
msgstr "消耗耗材絲 (m)"


#: src/slic3r/GUI/Plater.cpp:238 src/slic3r/GUI/Plater.cpp:1173
msgid "Used Filament (mm³)"
msgstr "消耗耗材絲 (mm³)"


#: src/slic3r/GUI/Plater.cpp:239 src/slic3r/GUI/Plater.cpp:1178
#: src/slic3r/GUI/Plater.cpp:1192
msgid "Used Filament (g)"
msgstr "消耗耗材絲 (g)"


#: src/slic3r/GUI/Plater.cpp:240
msgid "Used Material (unit)"
msgstr "消耗材料 (單位)"


#: src/slic3r/GUI/Plater.cpp:243
msgid "Number of tool changes"
msgstr "工具更換次數"


#: src/slic3r/GUI/Plater.cpp:357 src/slic3r/GUI/Tab.cpp:4285
#: src/slic3r/GUI/Tab.cpp:4286
msgid "Supports"
msgstr "支撐"


#: src/slic3r/GUI/Plater.cpp:360
msgid "Select what kind of support do you need"
msgstr "選擇您需要的支持類型"


#: src/slic3r/GUI/Plater.cpp:362 src/libslic3r/PrintConfig.cpp:3605
#: src/libslic3r/PrintConfig.cpp:4866
msgid "Support on build plate only"
msgstr "僅在熱牀上生成支撐"


#: src/slic3r/GUI/Plater.cpp:364
msgid "Everywhere"
msgstr "任何地方"


#: src/slic3r/GUI/Plater.cpp:396
msgid "Brim"
msgstr "側裙"


#: src/slic3r/GUI/Plater.cpp:398
msgid ""
"This flag enables the brim that will be printed around each object on the "
"first layer."
msgstr "此標誌啓用將在第一層上的每個對象周圍列印裙邊."


#: src/slic3r/GUI/Plater.cpp:406
msgid "Purging volumes"
msgstr "清理量"


#: src/slic3r/GUI/Plater.cpp:500 src/slic3r/GUI/Tab.cpp:4326
#: src/slic3r/GUI/Tab.cpp:4327 src/slic3r/GUI/Tab.cpp:4398
msgid "Pad"
msgstr "墊"


#: src/slic3r/GUI/Plater.cpp:757 src/slic3r/GUI/Plater.cpp:6256
msgid "Send to printer"
msgstr "發送到印表機"


#: src/slic3r/GUI/Plater.cpp:772 src/slic3r/GUI/Plater.cpp:3113
#: src/slic3r/GUI/Plater.cpp:5785
msgid "Slice now"
msgstr "立即切片"


#: src/slic3r/GUI/Plater.cpp:926
msgid "Hold Shift to Slice & Export G-code"
msgstr "按住Shift鍵來切片 並 導出G-code"


#: src/slic3r/GUI/Plater.cpp:1071
#, possible-c-format
msgid "%d (%d shells)"
msgstr "%d (%d 殼)"


#: src/slic3r/GUI/Plater.cpp:1076
#, possible-c-format
msgid "Auto-repaired (%d errors)"
msgstr "自動修復 (%d 錯誤):"


#: src/slic3r/GUI/Plater.cpp:1079
#, possible-c-format
msgid ""
"%d degenerate facets, %d edges fixed, %d facets removed, %d facets added, %d "
"facets reversed, %d backwards edges"
msgstr "%d 退化面,%d 邊緣固定,%d 面被移除,%d 面被刪除,%d 面反轉,%d 逆向邊緣"


#: src/slic3r/GUI/Plater.cpp:1089
msgid "Yes"
msgstr "是"


#: src/slic3r/GUI/Plater.cpp:1110
msgid "Used Material (ml)"
msgstr "使用的材料 (毫升)"


#: src/slic3r/GUI/Plater.cpp:1113
msgid "object(s)"
msgstr "對象 (s)"


#: src/slic3r/GUI/Plater.cpp:1113
msgid "supports and pad"
msgstr "支撐和墊"


#: src/slic3r/GUI/Plater.cpp:1153 src/slic3r/GUI/Plater.cpp:1234
msgid "objects"
msgstr "對象"


#: src/slic3r/GUI/Plater.cpp:1153 src/slic3r/GUI/Plater.cpp:1234
msgid "wipe tower"
msgstr "擦料塔"


#: src/slic3r/GUI/Plater.cpp:1232 src/libslic3r/PrintConfig.cpp:1521
#: src/libslic3r/PrintConfig.cpp:4681 src/libslic3r/PrintConfig.cpp:4682
msgid "Cost"
msgstr "單價"


#: src/slic3r/GUI/Plater.cpp:1250
msgid "normal mode"
msgstr "正常模式"


#: src/slic3r/GUI/Plater.cpp:2407
msgid "Loading"
msgstr "載入中"


#: src/slic3r/GUI/Plater.cpp:2517 src/slic3r/GUI/Plater.cpp:2570
msgid "Multi-part object detected"
msgstr "檢測到多部分對象"


#: src/slic3r/GUI/Plater.cpp:2525
msgid "Detected advanced data"
msgstr "檢測到的高級數據"


#: src/slic3r/GUI/Plater.cpp:2547
#, possible-c-format
msgid ""
"You can't to add the object(s) from %s because of one or some of them is"
"(are) multi-part"
msgstr "不能從 %s 中添加對象, 因爲其中一個或一些有多個部分"


#: src/slic3r/GUI/Plater.cpp:2584
msgid "Loaded"
msgstr "加載"


#: src/slic3r/GUI/Plater.cpp:2686
msgid ""
"Your object appears to be too large, so it was automatically scaled down to "
"fit your print bed."
msgstr "您的對象看起來太大, 因此它被自動縮小以適合您的列印牀。"


#: src/slic3r/GUI/Plater.cpp:2687
msgid "Object too large?"
msgstr "對象太大？"


#: src/slic3r/GUI/Plater.cpp:2749
msgid "Export STL file:"
msgstr "導出 STL 文件:"


#: src/slic3r/GUI/Plater.cpp:2756
msgid "Export AMF file:"
msgstr "導出 AMF 文件:"


#: src/slic3r/GUI/Plater.cpp:2762
msgid "Save file as:"
msgstr "將文件另存爲:"


#: src/slic3r/GUI/Plater.cpp:2960
msgid ""
"The selected object can't be split because it contains more than one volume/"
"material."
msgstr "無法拆分所選對象, 因爲它包含多個容量/材質。"


#: src/slic3r/GUI/Plater.cpp:3097 src/slic3r/GUI/Plater.cpp:3844
msgid "Invalid data"
msgstr "無效數據"


#: src/slic3r/GUI/Plater.cpp:3107
msgid "Ready to slice"
msgstr "準備切片"


#: src/slic3r/GUI/Plater.cpp:3155 src/slic3r/GUI/PrintHostDialogs.cpp:277
msgid "Cancelling"
msgstr "取消中"


#: src/slic3r/GUI/Plater.cpp:3174
msgid "Another export job is currently running."
msgstr "另一個導出作業當前正在運行。"


#: src/slic3r/GUI/Plater.cpp:3852 src/slic3r/GUI/PrintHostDialogs.cpp:278
msgid "Cancelled"
msgstr "已取消"


#: src/slic3r/GUI/Plater.cpp:4121 src/slic3r/GUI/Plater.cpp:4145
msgid "Remove the selected object"
msgstr "刪除選定的對象"


#: src/slic3r/GUI/Plater.cpp:4158
msgid "Export the selected object as STL file"
msgstr "將所選對象導出爲 STL 文件"


#: src/slic3r/GUI/Plater.cpp:4188
msgid "Along X axis"
msgstr "沿 X 軸"


#: src/slic3r/GUI/Plater.cpp:4188
msgid "Mirror the selected object along the X axis"
msgstr "沿 X 軸鏡像所選對象"


#: src/slic3r/GUI/Plater.cpp:4190
msgid "Along Y axis"
msgstr "沿 Y 軸"


#: src/slic3r/GUI/Plater.cpp:4190
msgid "Mirror the selected object along the Y axis"
msgstr "沿 Y 軸鏡像所選對象"


#: src/slic3r/GUI/Plater.cpp:4192
msgid "Along Z axis"
msgstr "沿 Z 軸"


#: src/slic3r/GUI/Plater.cpp:4192
msgid "Mirror the selected object along the Z axis"
msgstr "沿 Z 軸鏡像所選對象"


#: src/slic3r/GUI/Plater.cpp:4195
msgid "Mirror"
msgstr "鏡像"


#: src/slic3r/GUI/Plater.cpp:4195
msgid "Mirror the selected object"
msgstr "鏡像所選對象"


#: src/slic3r/GUI/Plater.cpp:4207
msgid "To objects"
msgstr "拆分到對象"


#: src/slic3r/GUI/Plater.cpp:4207 src/slic3r/GUI/Plater.cpp:4227
msgid "Split the selected object into individual objects"
msgstr "將所選對象拆分爲單個對象"


#: src/slic3r/GUI/Plater.cpp:4209
msgid "To parts"
msgstr "到零件"


#: src/slic3r/GUI/Plater.cpp:4209 src/slic3r/GUI/Plater.cpp:4245
msgid "Split the selected object into individual sub-parts"
msgstr "將所選對象拆分爲各個子部件"


#: src/slic3r/GUI/Plater.cpp:4212 src/slic3r/GUI/Plater.cpp:4227
#: src/slic3r/GUI/Plater.cpp:4245 src/libslic3r/PrintConfig.cpp:6382
msgid "Split"
msgstr "拆分"


#: src/slic3r/GUI/Plater.cpp:4212
msgid "Split the selected object"
msgstr "拆分所選對象"


#: src/slic3r/GUI/Plater.cpp:4234
msgid "Optimize orientation"
msgstr "優化方向"


#: src/slic3r/GUI/Plater.cpp:4235
msgid "Optimize the rotation of the object for better print results."
msgstr "優化對象的旋轉, 以獲得更好的列印效果。"


#: src/slic3r/GUI/Plater.cpp:5505
msgid "Save G-code file as:"
msgstr "將 G-code 文件另存爲:"


#: src/slic3r/GUI/Plater.cpp:5505
msgid "Save SL1 file as:"
msgstr "將 SL1 文件另存爲:"


#: src/slic3r/GUI/Plater.cpp:5652
#, possible-c-format
msgid "STL file exported to %s"
msgstr "STL 文件導出到 %s"


#: src/slic3r/GUI/Plater.cpp:5669
#, possible-c-format
msgid "AMF file exported to %s"
msgstr "AMF 文件導出到 %s"


#: src/slic3r/GUI/Plater.cpp:5672
#, possible-c-format
msgid "Error exporting AMF file %s"
msgstr "導出 AMF 文件 %s 時出錯"


#: src/slic3r/GUI/Plater.cpp:5712
#, possible-c-format
msgid "3MF file exported to %s"
msgstr "3MF 文件導出到 %s"


#: src/slic3r/GUI/Plater.cpp:5718
#, possible-c-format
msgid "Error exporting 3MF file %s"
msgstr "導出3MF 文件 %s 時出錯"


#: src/slic3r/GUI/Plater.cpp:6255
msgid "Export"
msgstr "導出"


#: src/slic3r/GUI/Preferences.cpp:57
msgid "General"
msgstr "常規"


#: src/slic3r/GUI/Preferences.cpp:72
msgid "Remember output directory"
msgstr "記住輸出目錄"


#: src/slic3r/GUI/Preferences.cpp:74
msgid ""
"If this is enabled, Slic3r will prompt the last output directory instead of "
"the one containing the input files."
msgstr ""
"如果啓用此功能, Slic3r 將提示最後一個輸出目錄, 而不是包含輸入文件的目錄。"


#: src/slic3r/GUI/Preferences.cpp:80
msgid "Auto-center parts"
msgstr "自動居中部件"


#: src/slic3r/GUI/Preferences.cpp:82
msgid ""
"If this is enabled, Slic3r will auto-center objects around the print bed "
"center."
msgstr "如果啓用此功能, Slic3r 將在列印牀中心周圍自動居中對象。"


#: src/slic3r/GUI/Preferences.cpp:88
msgid "Background processing"
msgstr "後臺處理"


#: src/slic3r/GUI/Preferences.cpp:90
msgid ""
"If this is enabled, Slic3r will pre-process objects as soon as they're "
"loaded in order to save time when exporting G-code."
msgstr ""
"如果啓用此功能, Slic3r 將在加載對象後立即對其進行預處理, 以便在導出  G-code "
"時節省時間。"


#: src/slic3r/GUI/Preferences.cpp:134
msgid ""
"If enabled, Slic3r downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"如果啓用，Slic3r 將在後臺下載內置系統預設的更新。 這些更新將會下載到一個單獨"
"的臨時文件夾。當一切準備就緒，將在應用啓動的時候提供新版本。"


#: src/slic3r/GUI/Preferences.cpp:139
msgid "Suppress \" - default - \" presets"
msgstr "禁止 \"-默認-\" 預設"


#: src/slic3r/GUI/Preferences.cpp:141
msgid ""
"Suppress \" - default - \" presets in the Print / Filament / Printer "
"selections once there are any other valid presets available."
msgstr ""
"在 \"列印/耗材絲/印表機\" 選擇中禁止 \"-默認-\" 預設, 一旦有任何其他有效的預"
"設可用。"


#: src/slic3r/GUI/Preferences.cpp:147
msgid "Show incompatible print and filament presets"
msgstr "顯示不兼容的列印和耗材絲預設"


#: src/slic3r/GUI/Preferences.cpp:149
msgid ""
"When checked, the print and filament presets are shown in the preset editor "
"even if they are marked as incompatible with the active printer"
msgstr ""
"選中後, 列印和耗材絲預設將顯示在預設編輯器中, 即使它們被標記爲與活動印表機不"
"兼容"


#: src/slic3r/GUI/Preferences.cpp:225
msgid "Use Retina resolution for the 3D scene"
msgstr "對3D 場景使用視網膜分辨率"


#: src/slic3r/GUI/Preferences.cpp:227
msgid ""
"If enabled, the 3D scene will be rendered in Retina resolution. If you are "
"experiencing 3D performance problems, disabling this option may help."
msgstr ""
"如果啓用, 3D 場景將以視網膜分辨率呈現。如果您遇到3D 性能問題, 禁用此選項可能"
"會有所幫助。"


#: src/slic3r/GUI/PresetComboBoxes.cpp:224
#: src/slic3r/GUI/PresetComboBoxes.cpp:262
#: src/slic3r/GUI/PresetComboBoxes.cpp:788
#: src/slic3r/GUI/PresetComboBoxes.cpp:838
#: src/slic3r/GUI/PresetComboBoxes.cpp:959
#: src/slic3r/GUI/PresetComboBoxes.cpp:1003
msgid "System presets"
msgstr "系統預設"


#: src/slic3r/GUI/PresetComboBoxes.cpp:266
#: src/slic3r/GUI/PresetComboBoxes.cpp:842
#: src/slic3r/GUI/PresetComboBoxes.cpp:1007
msgid "User presets"
msgstr "用戶預設"


#: src/slic3r/GUI/PresetComboBoxes.cpp:651
msgid "Click to edit preset"
msgstr "點擊編輯預設"


#: src/slic3r/GUI/PresetHints.cpp:237
msgid "external perimeters"
msgstr "外圍輪廓"


#: src/slic3r/GUI/PresetHints.cpp:246
msgid "perimeters"
msgstr "輪廓"


#: src/slic3r/GUI/PresetHints.cpp:255
msgid "infill"
msgstr "填充"


#: src/slic3r/GUI/PresetHints.cpp:265
msgid "solid infill"
msgstr "實心填充"


#: src/slic3r/GUI/PresetHints.cpp:273
msgid "top solid infill"
msgstr "頂部實心填充"


#: src/slic3r/GUI/PresetHints.cpp:284
msgid "support"
msgstr "支持"


#: src/slic3r/GUI/PresetHints.cpp:294
msgid "support interface"
msgstr "支撐面"


#: src/slic3r/GUI/PresetHints.cpp:300
msgid "First layer volumetric"
msgstr "首層流量"


#: src/slic3r/GUI/PresetHints.cpp:300
msgid "Bridging volumetric"
msgstr "橋接流量"


#: src/slic3r/GUI/PresetHints.cpp:300
msgid "Volumetric"
msgstr "體積"


#: src/slic3r/GUI/PresetHints.cpp:301
msgid "flow rate is maximized"
msgstr "流量已經最大化"


#: src/slic3r/GUI/PresetHints.cpp:304
msgid "by the print profile maximum"
msgstr "根據列印配置文件的最大值"


#: src/slic3r/GUI/PresetHints.cpp:305
msgid "when printing"
msgstr "當列印"


#: src/slic3r/GUI/PresetHints.cpp:306
msgid "with a volumetric rate"
msgstr "用流量速率"


#: src/slic3r/GUI/PrintHostDialogs.cpp:35
msgid "Send G-Code to printer host"
msgstr "向印表機主機發送 G-Code"


#: src/slic3r/GUI/PrintHostDialogs.cpp:35
msgid "Upload to Printer Host with the following filename:"
msgstr "使用以下文件名上載到印表機主機:"


#: src/slic3r/GUI/PrintHostDialogs.cpp:37
msgid "Start printing after upload"
msgstr "上傳後開始列印"


#: src/slic3r/GUI/PrintHostDialogs.cpp:45
msgid "Use forward slashes ( / ) as a directory separator if needed."
msgstr "如果需要, 使用正向斜槓 (/) 作爲目錄分隔符。"


#: src/slic3r/GUI/PrintHostDialogs.cpp:190
msgid "Progress"
msgstr "進度"


#: src/slic3r/GUI/PrintHostDialogs.cpp:191
msgid "Status"
msgstr "狀態："


#: src/slic3r/GUI/PrintHostDialogs.cpp:197
msgid "Cancel selected"
msgstr "取消選定"


#: src/slic3r/GUI/PrintHostDialogs.cpp:199
msgid "Show error message"
msgstr "顯示錯誤消息"


#: src/slic3r/GUI/PrintHostDialogs.cpp:241
#: src/slic3r/GUI/PrintHostDialogs.cpp:274
msgid "Enqueued"
msgstr "加入隊列"


#: src/slic3r/GUI/PrintHostDialogs.cpp:275
msgid "Uploading"
msgstr "上傳中"


#: src/slic3r/GUI/PrintHostDialogs.cpp:279
msgid "Completed"
msgstr "已完成"


#: src/slic3r/GUI/PrintHostDialogs.cpp:317
msgid "Error uploading to print host:"
msgstr "上載到列印主機時出錯:"


#: src/slic3r/GUI/RammingChart.cpp:23
msgid "NO RAMMING AT ALL"
msgstr "完全不存在"


#: src/slic3r/GUI/RammingChart.cpp:81
msgid "Volumetric speed"
msgstr "流量速度"


#: src/slic3r/GUI/RammingChart.cpp:81 src/libslic3r/PrintConfig.cpp:1237
#: src/libslic3r/PrintConfig.cpp:2550
msgid "mm³/s"
msgstr "mm³/s"


#: src/slic3r/GUI/SavePresetDialog.cpp:116
msgid "The supplied name is not available."
msgstr "提供的名稱不可用。"


#: src/slic3r/GUI/SavePresetDialog.cpp:122
msgid "Cannot overwrite a system profile."
msgstr "無法覆蓋系統配置文件。"


#: src/slic3r/GUI/SavePresetDialog.cpp:127
msgid "Cannot overwrite an external profile."
msgstr "無法覆蓋外部配置文件。"


#: src/slic3r/GUI/SavePresetDialog.cpp:186
#: src/slic3r/GUI/SavePresetDialog.cpp:192
msgid "Save preset"
msgstr "保存預設"


#: src/slic3r/GUI/Selection.cpp:960
msgid "Scale To Fit"
msgstr "縮放到合適大小"


#: src/slic3r/GUI/Tab.cpp:117 src/libslic3r/PrintConfig.cpp:517
msgid "Compatible printers"
msgstr "兼容的印表機"


#: src/slic3r/GUI/Tab.cpp:118
msgid "Select the printers this profile is compatible with."
msgstr "選擇與此配置文件兼容的印表機。"


#: src/slic3r/GUI/Tab.cpp:123 src/libslic3r/PrintConfig.cpp:532
msgid "Compatible print profiles"
msgstr "兼容的列印配置文件"


#: src/slic3r/GUI/Tab.cpp:124
msgid "Select the print profiles this profile is compatible with."
msgstr "選擇與此配置文件兼容的列印配置文件。"


#: src/slic3r/GUI/Tab.cpp:220
msgid "Delete this preset"
msgstr "刪除該預設"


#: src/slic3r/GUI/Tab.cpp:224
msgid ""
"Hover the cursor over buttons to find more information \n"
"or click this button."
msgstr ""
"將光標懸停在按鈕上以查找更多信息\n"
"或單擊此按鈕。"


#: src/slic3r/GUI/Tab.cpp:1362
msgid "Current preset is inherited from"
msgstr "當前預設繼承自"


#: src/slic3r/GUI/Tab.cpp:1366
msgid "It can't be deleted or modified."
msgstr "它不能被刪除或修改."


#: src/slic3r/GUI/Tab.cpp:1367
msgid ""
"Any modifications should be saved as a new preset inherited from this one."
msgstr "任何修改都應保存爲從當前配置繼承的新預設."


#: src/slic3r/GUI/Tab.cpp:1368
msgid "To do that please specify a new name for the preset."
msgstr "爲此, 請爲預設指定新名稱。"


#: src/slic3r/GUI/Tab.cpp:1372
msgid "Additional information:"
msgstr "附加信息："


#: src/slic3r/GUI/Tab.cpp:1378
msgid "printer model"
msgstr "印表機型號"


#: src/slic3r/GUI/Tab.cpp:1386
msgid "default print profile"
msgstr "默認 SLA 列印配置文件"


#: src/slic3r/GUI/Tab.cpp:1389
msgid "default filament profile"
msgstr "默認耗材絲配置"


#: src/slic3r/GUI/Tab.cpp:1403
msgid "default SLA material profile"
msgstr "默認 SLA 材料配置文件"


#: src/slic3r/GUI/Tab.cpp:1407
msgid "default SLA print profile"
msgstr "默認 SLA 列印配置文件"


#: src/slic3r/GUI/Tab.cpp:1611 src/slic3r/GUI/Tab.cpp:2026
#: src/libslic3r/PrintConfig.cpp:2665
msgid "Nozzle diameter"
msgstr "噴嘴直徑"


#: src/slic3r/GUI/Tab.cpp:1958
msgid "Ramming settings"
msgstr "衝壓設置"


#: src/slic3r/GUI/Tab.cpp:1994
msgid "Extruders"
msgstr "擠出頭"


#: src/slic3r/GUI/Tab.cpp:1995
msgid "Number of extruders of the printer."
msgstr "印表機擠出機的數量。"


#: src/slic3r/GUI/Tab.cpp:2518 src/slic3r/GUI/Tab.cpp:2624
msgid "Machine limits"
msgstr "機器限制"


#: src/slic3r/GUI/Tab.cpp:2524
msgid "Machine Limits"
msgstr "機器限制"


#: src/slic3r/GUI/Tab.cpp:2560
msgid "Maximum feedrates"
msgstr "最大進給率"


#: src/slic3r/GUI/Tab.cpp:2568
msgid "Maximum accelerations"
msgstr "最大加速度"


#: src/slic3r/GUI/Tab.cpp:2576
msgid "Jerk limits"
msgstr "抖動限制"


#: src/slic3r/GUI/Tab.cpp:2581
msgid "Minimum feedrates"
msgstr "最小進給率"


#: src/slic3r/GUI/Tab.cpp:2652 src/slic3r/GUI/Tab.cpp:2661
msgid "Single extruder MM setup"
msgstr "單擠出機 MM 設置"


#: src/slic3r/GUI/Tab.cpp:2662
msgid "Single extruder multimaterial parameters"
msgstr "單擠出機多材料參數"


#: src/slic3r/GUI/Tab.cpp:2897
msgid ""
"The Wipe option is not available when using the Firmware Retraction mode.\n"
"\n"
"Shall I disable it in order to enable Firmware Retraction?"
msgstr ""
"使用固件回抽模式時, \"擦除\" 選項不可用。\n"
"\n"
"要禁用它以啓用固件回抽嗎？"


#: src/slic3r/GUI/Tab.cpp:2899
msgid "Firmware Retraction"
msgstr "固件回縮"


#: src/slic3r/GUI/Tab.cpp:3610
msgid "remove"
msgstr "移除"


#: src/slic3r/GUI/Tab.cpp:3610
msgid "delete"
msgstr "刪除"


#: src/slic3r/GUI/Tab.cpp:3738 src/slic3r/GUI/Tab.cpp:3810
msgid "Set"
msgstr "設置"


#: src/slic3r/GUI/Tab.cpp:4001
msgid ""
"WHITE BULLET icon indicates that the settings are the same as in the last "
"saved preset for the current option group."
msgstr "白色子彈圖標表示設置與當前選項組上次保存的預設中的設置相同。"


#: src/slic3r/GUI/Tab.cpp:4003
msgid ""
"BACK ARROW icon indicates that the settings were changed and are not equal "
"to the last saved preset for the current option group.\n"
"Click to reset all settings for the current option group to the last saved "
"preset."
msgstr ""
"\"後退箭頭\" 圖標表示設置已更改, 與當前選項組的上次保存的預設不相等。\n"
"單擊可將當前選項組的所有設置重置爲上次保存的預設。"


#: src/slic3r/GUI/Tab.cpp:4016
msgid ""
"WHITE BULLET icon indicates that the value is the same as in the last saved "
"preset."
msgstr "白色子彈圖標表示該值與上次保存的預設中的值相同。"


#: src/slic3r/GUI/Tab.cpp:4017
msgid ""
"BACK ARROW icon indicates that the value was changed and is not equal to the "
"last saved preset.\n"
"Click to reset current value to the last saved preset."
msgstr ""
"\"後退箭頭\" 圖標表示該值已更改, 不等於上次保存的預設。\n"
"單擊可將當前值重置爲上次保存的預設。"


#: src/slic3r/GUI/Tab.cpp:4163 src/slic3r/GUI/Tab.cpp:4165
msgid "Material"
msgstr "材料"


#: src/slic3r/GUI/Tab.cpp:4200
msgid "Exposure"
msgstr "曝光"


#: src/slic3r/GUI/Tab.cpp:4204
msgid "Corrections"
msgstr "修正"


#: src/slic3r/GUI/Tab.cpp:4220 src/slic3r/GUI/Tab.cpp:4221
msgid "Notes"
msgstr "備註"


#: src/slic3r/GUI/Tab.cpp:4228 src/slic3r/GUI/Tab.cpp:4361
msgid "Dependencies"
msgstr "依賴"


#: src/slic3r/GUI/Tab.cpp:4229 src/slic3r/GUI/Tab.cpp:4362
msgid "Profile dependencies"
msgstr "配置文件依賴"


#: src/slic3r/GUI/Tab.cpp:4279
msgid "Layers and perimeters"
msgstr "層和輪廓"


#: src/slic3r/GUI/Tab.cpp:4289
msgid "Support head"
msgstr "支撐頭部寬度"


#: src/slic3r/GUI/Tab.cpp:4294
msgid "Support pillar"
msgstr "支撐支柱"


#: src/slic3r/GUI/Tab.cpp:4317
msgid "Connection of the support sticks and junctions"
msgstr "支撐杆和連接點的連接"


#: src/slic3r/GUI/Tab.cpp:4322
msgid "Automatic generation"
msgstr "自動生成"


#: src/slic3r/GUI/Tab.cpp:4351
msgid "Advanced"
msgstr "進階"


#: src/slic3r/GUI/Tab.cpp:4355
msgid "Output options"
msgstr "輸出選項"


#: src/slic3r/GUI/Tab.cpp:4356
msgid "Output file"
msgstr "輸出文件"


#: src/slic3r/GUI/Tab.cpp:4398 src/libslic3r/PrintConfig.cpp:4945
msgid "Object elevation"
msgstr "對象高程"


#: src/slic3r/GUI/Tab.hpp:382 src/slic3r/GUI/Tab.hpp:515
msgid "Print Settings"
msgstr "列印設置"


#: src/slic3r/GUI/Tab.hpp:414
msgid "Filament Settings"
msgstr "耗材絲設置"


#: src/slic3r/GUI/Tab.hpp:464
msgid "Printer Settings"
msgstr "印表機設置"


#: src/slic3r/GUI/Tab.hpp:499
msgid "Material Settings"
msgstr "材料設置"


#: src/slic3r/GUI/UnsavedChangesDialog.cpp:1105
msgid "Capabilities"
msgstr "權限"


#: src/slic3r/GUI/UpdateDialogs.cpp:38
msgid "Update available"
msgstr "更新可用"


#: src/slic3r/GUI/UpdateDialogs.cpp:43
msgid "Current version:"
msgstr "當前版本:"


#: src/slic3r/GUI/UpdateDialogs.cpp:45
msgid "New version:"
msgstr "新版本："


#: src/slic3r/GUI/UpdateDialogs.cpp:71
msgid "Don't notify about new releases any more"
msgstr "不再通知有關新版本的信息"


#: src/slic3r/GUI/UpdateDialogs.cpp:89 src/slic3r/GUI/UpdateDialogs.cpp:266
msgid "Configuration update"
msgstr "配置更新"


#: src/slic3r/GUI/UpdateDialogs.cpp:89
msgid "Configuration update is available"
msgstr "配置更新可用"


#: src/slic3r/GUI/UpdateDialogs.cpp:92
msgid ""
"Would you like to install it?\n"
"\n"
"Note that a full configuration snapshot will be created first. It can then "
"be restored at any time should there be a problem with the new version.\n"
"\n"
"Updated configuration bundles:"
msgstr ""
"是否要安裝它？\n"
"\n"
"請注意, 將首先創建完整的配置快照。如果新版本有問題, 可以隨時對其進行還原。\n"
"\n"
"更新的配置包:"


#: src/slic3r/GUI/UpdateDialogs.cpp:230
msgid "Incompatible bundles:"
msgstr "不兼容的包:"


#: src/slic3r/GUI/UpdateDialogs.cpp:249
msgid "Re-configure"
msgstr "重新配置"


#: src/slic3r/GUI/WipeTowerDialog.cpp:15
msgid "Ramming customization"
msgstr "衝擊自定義"


#: src/slic3r/GUI/WipeTowerDialog.cpp:41
msgid ""
"Ramming denotes the rapid extrusion just before a tool change in a single-"
"extruder MM printer. Its purpose is to properly shape the end of the "
"unloaded filament so it does not prevent insertion of the new filament and "
"can itself be reinserted later. This phase is important and different "
"materials can require different extrusion speeds to get the good shape. For "
"this reason, the extrusion rates during ramming are adjustable.\n"
"\n"
"This is an expert-level setting, incorrect adjustment will likely lead to "
"jams, extruder wheel grinding into filament etc."
msgstr ""
"衝擊表示在單擠出機 MM 印表機的刀具更換之前的快速擠出。它的目的是正確地塑造卸"
"載的燈絲的末端, 這樣它就不會導致插入新的耗材絲卡住, 並且原耗材絲本身可以再重"
"新插入。這個階段很重要, 不同的材料可能需要不同的擠壓速度, 以獲得良好的形狀。"
"因此, 夯實衝擊過程中的擠出速率是可調的。\n"
"\n"
"這是一個專家級設置, 不正確的調整很可能會導致卡料, 擠出機砂輪磨耗材絲等。"


#: src/slic3r/GUI/WipeTowerDialog.cpp:83
msgid "Total ramming time"
msgstr "總衝擊時間"


#: src/slic3r/GUI/WipeTowerDialog.cpp:85
msgid "Total rammed volume"
msgstr "總衝擊量"


#: src/slic3r/GUI/WipeTowerDialog.cpp:89
msgid "Ramming line width"
msgstr "衝擊線寬度"


#: src/slic3r/GUI/WipeTowerDialog.cpp:91
msgid "Ramming line spacing"
msgstr "衝擊線行距"


#: src/slic3r/GUI/WipeTowerDialog.cpp:142
msgid "Wipe tower - Purging volume adjustment"
msgstr "擦拭塔-擠出清理體積調整"


#: src/slic3r/GUI/WipeTowerDialog.cpp:254
msgid ""
"Here you can adjust required purging volume (mm³) for any given pair of "
"tools."
msgstr "在這裏, 您可以調整任何給定的對工具所需的清除體積 (mm³) 。"


#: src/slic3r/GUI/WipeTowerDialog.cpp:255
msgid "Extruder changed to"
msgstr "擠出機更改爲"


#: src/slic3r/GUI/WipeTowerDialog.cpp:263
msgid "unloaded"
msgstr "卸載"


#: src/slic3r/GUI/WipeTowerDialog.cpp:264
msgid "loaded"
msgstr "裝載"


#: src/slic3r/GUI/WipeTowerDialog.cpp:276
msgid "Tool #"
msgstr "工具 #"


#: src/slic3r/GUI/WipeTowerDialog.cpp:285
msgid ""
"Total purging volume is calculated by summing two values below, depending on "
"which tools are loaded/unloaded."
msgstr "總清除量是通過求和下面的兩個值來計算的, 具體取決於裝載/卸載的工具。"


#: src/slic3r/GUI/WipeTowerDialog.cpp:286
msgid "Volume to purge (mm³) when the filament is being"
msgstr "要清除的體積 (mm³) 當耗材正在被"


#: src/slic3r/GUI/WipeTowerDialog.cpp:300
msgid "From"
msgstr "從"


#: src/slic3r/GUI/WipeTowerDialog.cpp:365
msgid ""
"Switching to simple settings will discard changes done in the advanced "
"mode!\n"
"\n"
"Do you want to proceed?"
msgstr ""
"切換到簡單設置將放棄在高級模式下所做的更改!\n"
"\n"
"要繼續嗎？"


#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show simplified settings"
msgstr "顯示簡單設置"


#: src/slic3r/GUI/WipeTowerDialog.cpp:377
msgid "Show advanced settings"
msgstr "顯示高級設置"


#: src/slic3r/GUI/wxExtensions.cpp:651
#, possible-c-format
msgid "Switch to the %s mode"
msgstr "切換到 %s 模式"


#: src/slic3r/GUI/wxExtensions.cpp:652
#, possible-c-format
msgid "Current mode is %s"
msgstr "當前模式爲 %s"


#: src/slic3r/Utils/AstroBox.cpp:69 src/slic3r/Utils/OctoPrint.cpp:68
#: src/slic3r/Utils/Repetier.cpp:69
#, possible-c-format
msgid "Mismatched type of print host: %s"
msgstr "列印主機類型不匹配: %s"


#: src/slic3r/Utils/Duet.cpp:47
msgid "Connection to Duet works correctly."
msgstr "與 Duet 的連接工作正常。"


#: src/slic3r/Utils/Duet.cpp:53
msgid "Could not connect to Duet"
msgstr "無法連接到 Duet"


#: src/slic3r/Utils/Duet.cpp:88 src/slic3r/Utils/Duet.cpp:151
#: src/slic3r/Utils/FlashAir.cpp:122 src/slic3r/Utils/FlashAir.cpp:143
#: src/slic3r/Utils/FlashAir.cpp:159
msgid "Unknown error occured"
msgstr "發生未知錯誤"


#: src/slic3r/Utils/Duet.cpp:145
msgid "Wrong password"
msgstr "密碼錯誤"


#: src/slic3r/Utils/Duet.cpp:148
msgid "Could not get resources to create a new connection"
msgstr "無法獲取資源來創建新連接"


#: src/slic3r/Utils/FixModelByWin10.cpp:219
#: src/slic3r/Utils/FixModelByWin10.cpp:359
msgid "Exporting source model"
msgstr "導出源模型"


#: src/slic3r/Utils/FixModelByWin10.cpp:235
msgid "Failed loading the input model."
msgstr "加載輸入模型失敗。"


#: src/slic3r/Utils/FixModelByWin10.cpp:242
msgid "Repairing model by the Netfabb service"
msgstr "基於 Netfabb 服務的修復模型"


#: src/slic3r/Utils/FixModelByWin10.cpp:248
msgid "Mesh repair failed."
msgstr "網格修復失敗。"


#: src/slic3r/Utils/FixModelByWin10.cpp:251
#: src/slic3r/Utils/FixModelByWin10.cpp:378
msgid "Loading repaired model"
msgstr "裝載修復的模型"


#: src/slic3r/Utils/FixModelByWin10.cpp:263
#: src/slic3r/Utils/FixModelByWin10.cpp:270
#: src/slic3r/Utils/FixModelByWin10.cpp:302
msgid "Saving mesh into the 3MF container failed."
msgstr "將網格保存到 3MF 容器失敗。"


#: src/slic3r/Utils/FixModelByWin10.cpp:340
msgid "Model fixing"
msgstr "模型修復中"


#: src/slic3r/Utils/FixModelByWin10.cpp:341
msgid "Exporting model"
msgstr "導出模型"


#: src/slic3r/Utils/FixModelByWin10.cpp:368
msgid "Export of a temporary 3mf file failed"
msgstr "導出臨時 3mf 文件失敗"


#: src/slic3r/Utils/FixModelByWin10.cpp:383
msgid "Import of the repaired 3mf file failed"
msgstr "導入修復的 3mf 文件失敗"


#: src/slic3r/Utils/FixModelByWin10.cpp:385
msgid "Repaired 3MF file does not contain any object"
msgstr "已修復的3MF 文件不包含任何對象"


#: src/slic3r/Utils/FixModelByWin10.cpp:387
msgid "Repaired 3MF file contains more than one object"
msgstr "修復的3MF 文件包含多個對象"


#: src/slic3r/Utils/FixModelByWin10.cpp:389
msgid "Repaired 3MF file does not contain any volume"
msgstr "已修復的3MF 文件不包含任何卷"


#: src/slic3r/Utils/FixModelByWin10.cpp:391
msgid "Repaired 3MF file contains more than one volume"
msgstr "修復的3MF 文件包含多個卷"


#: src/slic3r/Utils/FixModelByWin10.cpp:400
msgid "Model repair finished"
msgstr "模型修復完成"


#: src/slic3r/Utils/FixModelByWin10.cpp:406
msgid "Model repair canceled"
msgstr "模型修復取消"


#: src/slic3r/Utils/FixModelByWin10.cpp:423
msgid "Model repaired successfully"
msgstr "模型已成功修復"


#: src/slic3r/Utils/FixModelByWin10.cpp:423
#: src/slic3r/Utils/FixModelByWin10.cpp:426
msgid "Model Repair by the Netfabb service"
msgstr "通過 Netfabb 服務修復模型"


#: src/slic3r/Utils/OctoPrint.cpp:83
msgid "Connection to OctoPrint works correctly."
msgstr "與OctoPrint的連接工作正常。"


#: src/slic3r/Utils/OctoPrint.cpp:89
msgid "Could not connect to OctoPrint"
msgstr "無法連接到 OctoPrint"


#: src/slic3r/Utils/OctoPrint.cpp:91
msgid "Note: OctoPrint version at least 1.1.0 is required."
msgstr "注意: 至少需要1.1.0 版本的 OctoPrint."


#: src/slic3r/Utils/OctoPrint.cpp:191
msgid "Could not connect to Prusa SLA"
msgstr "無法連接到 Prusa SLA"


#: src/slic3r/Utils/PresetUpdater.cpp:744
#, possible-c-format
msgid "requires min. %s and max. %s"
msgstr "需要最小 %s 和最大 %s"


#: src/slic3r/Utils/PresetUpdater.cpp:748
#, possible-c-format
msgid "requires min. %s"
msgstr "需要最小 %s"


#: src/slic3r/Utils/PresetUpdater.cpp:751
#, possible-c-format
msgid "requires max. %s"
msgstr "需要最大 %s"


#: src/libslic3r/ExtrusionEntity.cpp:288 src/libslic3r/ExtrusionEntity.cpp:332
msgid "Mixed"
msgstr "混合"


#: src/libslic3r/miniz_extension.cpp:91
msgid "undefined error"
msgstr "未定義的錯誤"


#: src/libslic3r/miniz_extension.cpp:93
msgid "too many files"
msgstr "文件太多"


#: src/libslic3r/miniz_extension.cpp:95
msgid "file too large"
msgstr "文件太大"


#: src/libslic3r/miniz_extension.cpp:97
msgid "unsupported method"
msgstr "不支持的方法"


#: src/libslic3r/miniz_extension.cpp:99
msgid "unsupported encryption"
msgstr "不支持的加密"


#: src/libslic3r/miniz_extension.cpp:101
msgid "unsupported feature"
msgstr "不支持的功能"


#: src/libslic3r/miniz_extension.cpp:103
msgid "failed finding central directory"
msgstr "找不到中心目錄"


#: src/libslic3r/miniz_extension.cpp:105
msgid "not a ZIP archive"
msgstr "而不是 ZIP 存檔"


#: src/libslic3r/miniz_extension.cpp:107
msgid "invalid header or archive is corrupted"
msgstr "無效的標頭或存檔已損壞"


#: src/libslic3r/miniz_extension.cpp:109
msgid "unsupported multidisk archive"
msgstr "不支持的多磁盤存檔"


#: src/libslic3r/miniz_extension.cpp:111
msgid "decompression failed or archive is corrupted"
msgstr "解壓縮失敗或存檔已損壞"


#: src/libslic3r/miniz_extension.cpp:113
msgid "compression failed"
msgstr "壓縮失敗"


#: src/libslic3r/miniz_extension.cpp:115
msgid "unexpected decompressed size"
msgstr "意外解壓縮大小"


#: src/libslic3r/miniz_extension.cpp:117
msgid "CRC-32 check failed"
msgstr "CRC-32 檢查失敗"


#: src/libslic3r/miniz_extension.cpp:119
msgid "unsupported central directory size"
msgstr "不支持的中心目錄大小"


#: src/libslic3r/miniz_extension.cpp:121
msgid "allocation failed"
msgstr "燒錄失敗"


#: src/libslic3r/miniz_extension.cpp:123
msgid "file open failed"
msgstr "文件打開失敗"


#: src/libslic3r/miniz_extension.cpp:125
msgid "file create failed"
msgstr "文件創建失敗"


#: src/libslic3r/miniz_extension.cpp:127
msgid "file write failed"
msgstr "文件寫入失敗"


#: src/libslic3r/miniz_extension.cpp:129
msgid "file read failed"
msgstr "文件讀取失敗"


#: src/libslic3r/miniz_extension.cpp:131
msgid "file close failed"
msgstr "文件關閉失敗"


#: src/libslic3r/miniz_extension.cpp:133
msgid "file seek failed"
msgstr "文件查找失敗"


#: src/libslic3r/miniz_extension.cpp:135
msgid "file stat failed"
msgstr "文件統計失敗"


#: src/libslic3r/miniz_extension.cpp:137
msgid "invalid parameter"
msgstr "無效參數"


#: src/libslic3r/miniz_extension.cpp:139
msgid "invalid filename"
msgstr "無效的文件名"


#: src/libslic3r/miniz_extension.cpp:141
msgid "buffer too small"
msgstr "緩衝區太小"


#: src/libslic3r/miniz_extension.cpp:143
msgid "internal error"
msgstr "內部錯誤"


#: src/libslic3r/miniz_extension.cpp:145
msgid "file not found"
msgstr "文件未找到"


#: src/libslic3r/miniz_extension.cpp:147
msgid "archive is too large"
msgstr "存檔太大"


#: src/libslic3r/miniz_extension.cpp:149
msgid "validation failed"
msgstr "驗證失敗"


#: src/libslic3r/miniz_extension.cpp:151
msgid "write calledback failed"
msgstr "寫回失敗"


#: src/libslic3r/Preset.cpp:1549
msgid "filament"
msgstr "耗材"


#: src/libslic3r/Print.cpp:1361
msgid "All objects are outside of the print volume."
msgstr "所有對象都在列印範圍之外。"


#: src/libslic3r/Print.cpp:1364
msgid "The supplied settings will cause an empty print."
msgstr "當前提供的設置將導致空列印。"


#: src/libslic3r/Print.cpp:1368
msgid "Some objects are too close; your extruder will collide with them."
msgstr "有些物體太過靠近; 你的擠出頭有機會和他們相撞。"


#: src/libslic3r/Print.cpp:1370
msgid ""
"Some objects are too tall and cannot be printed without extruder collisions."
msgstr "有些物體太高, 無法在擠出頭不衝突的情況下列印。"


#: src/libslic3r/Print.cpp:1387
msgid ""
"The Spiral Vase option can only be used when printing single material "
"objects."
msgstr "\"螺旋花瓶\" 選項只能在列印單個材料對象時使用。"


#: src/libslic3r/Print.cpp:1406
msgid ""
"The Wipe Tower is currently only supported for the Marlin, RepRap/Sprinter "
"and Repetier G-code flavors."
msgstr "擦料塔目前只支持 Marlin, RepRap/Sprinter  和 Repetier G-code 類型。"


#: src/libslic3r/Print.cpp:1408
msgid ""
"The Wipe Tower is currently only supported with the relative extruder "
"addressing (use_relative_e_distances=1)."
msgstr "擦料塔目前僅支持相對擠出機尋址 (use_relative_e_distances=1)。"


#: src/libslic3r/Print.cpp:1437
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"over an equal number of raft layers"
msgstr "只有在相同數量的基座層上列印的對象時, 才支持擦料塔"


#: src/libslic3r/Print.cpp:1441
msgid ""
"The Wipe Tower is only supported for multiple objects if they are printed "
"with the same support_material_contact_distance"
msgstr ""
"只有在使用相同的support_material_contact_distance（支撐材料距離）列印多個對象"
"時, 才支持擦料塔"


#: src/libslic3r/Print.cpp:1443
msgid ""
"The Wipe Tower is only supported for multiple objects if they are sliced "
"equally."
msgstr "只有在多個對象被平均切割的情況下, 才支持擦料塔。"


#: src/libslic3r/Print.cpp:1511
msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr "爲一個或多個對象分配了印表機不存在的擠出機。"


#: src/libslic3r/Print.cpp:1534
msgid ""
"Printing with multiple extruders of differing nozzle diameters. If support "
"is to be printed with the current extruder (support_material_extruder == 0 "
"or support_material_interface_extruder == 0), all nozzles have to be of the "
"same diameter."
msgstr ""
"使用不同噴嘴直徑的多個擠出機進行列印。如果要使用當前擠出機"
"(support_material_extruder == 0 或 support_material_interface_extruder == 0)"
"列印支撐物, 則所有噴嘴的直徑必須相同。"


#: src/libslic3r/Print.cpp:1542
msgid ""
"For the Wipe Tower to work with the soluble supports, the support layers "
"need to be synchronized with the object layers."
msgstr "要使擦料塔與可溶性支撐配合使用, 支持層需要與對象圖層同步。"


#: src/libslic3r/Print.cpp:1546
msgid ""
"The Wipe Tower currently supports the non-soluble supports only if they are "
"printed with the current extruder without triggering a tool change. (both "
"support_material_extruder and support_material_interface_extruder need to be "
"set to 0)."
msgstr ""
"只有在不觸發工具更改的情況下, 使用當前擠出機列印的未溶性支撐塔目前才支持不溶"
"於的支架。(support_material_extruder  和support_material_interface_extruder "
"都需要設置爲 0)。"


#: src/libslic3r/Print.cpp:1568
msgid "First layer height can't be greater than nozzle diameter"
msgstr "第一層高度不能大於噴嘴直徑"


#: src/libslic3r/Print.cpp:1573
msgid "Layer height can't be greater than nozzle diameter"
msgstr "層高度不能大於噴嘴直徑"


#: src/libslic3r/PrintBase.cpp:72
msgid "Failed processing of the output_filename_format template."
msgstr "處理 output_filename_format 模板失敗。"


#: src/libslic3r/PrintConfig.cpp:49 src/libslic3r/PrintConfig.cpp:50
msgid "Printer technology"
msgstr "印表機技術"


#: src/libslic3r/PrintConfig.cpp:58
msgid "Bed shape"
msgstr "機牀形狀"


#: src/libslic3r/PrintConfig.cpp:113
msgid ""
"This setting controls the height (and thus the total number) of the slices/"
"layers. Thinner layers give better accuracy but take more time to print."
msgstr ""
"該參數控制切片的高度（因此也控制總層數）。較薄的切片可以使精度更高，但花費的"
"列印時間也更長。"


#: src/libslic3r/PrintConfig.cpp:121
msgid "Max print height"
msgstr "最大列印高度"


#: src/libslic3r/PrintConfig.cpp:123
msgid ""
"Set this to the maximum height that can be reached by your extruder while "
"printing."
msgstr "將其設置爲您的擠出機在列印時可以達到的最大高度。"


#: src/libslic3r/PrintConfig.cpp:131
msgid "Slice gap closing radius"
msgstr "切片間隙閉合半徑"


#: src/libslic3r/PrintConfig.cpp:133
msgid ""
"Cracks smaller than 2x gap closing radius are being filled during the "
"triangle mesh slicing. The gap closing operation may reduce the final print "
"resolution, therefore it is advisable to keep the value reasonably low."
msgstr ""
"在三角形網格切片過程中, 小於2倍間隙閉合半徑的裂紋將會被填充。間隙閉合操作可能"
"會降低最終列印分辨率, 因此最好將該值保持在合理的較低水平。"


#: src/libslic3r/PrintConfig.cpp:141 src/libslic3r/PrintConfig.cpp:2707
msgid "Hostname, IP or URL"
msgstr "主機名, IP  或 URL"


#: src/libslic3r/PrintConfig.cpp:151 src/libslic3r/PrintConfig.cpp:2692
msgid "API Key / Password"
msgstr "API 密鑰/密碼"


#: src/libslic3r/PrintConfig.cpp:153 src/libslic3r/PrintConfig.cpp:2694
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the API Key or the password required for authentication."
msgstr ""
"Slic3r 可以將 G-code 文件上載到印表機主機。此字段應包含 API 密鑰或身份驗證所"
"需的密碼。"


#: src/libslic3r/PrintConfig.cpp:222
msgid "Avoid crossing perimeters"
msgstr "避免跨越輪廓"


#: src/libslic3r/PrintConfig.cpp:224
msgid ""
"Optimize travel moves in order to minimize the crossing of perimeters. This "
"is mostly useful with Bowden extruders which suffer from oozing. This "
"feature slows down both the print and the G-code generation."
msgstr ""
"爲了儘量減少跨越輪廓，優化空程的移動方式。這非常適用於受滲漏問題影響的鮑登擠"
"出頭。此功能會減慢列印速度和 G 代碼生成速度。"


#: src/libslic3r/PrintConfig.cpp:249 src/libslic3r/PrintConfig.cpp:3826
msgid "Other layers"
msgstr "其它層"


#: src/libslic3r/PrintConfig.cpp:251
msgid ""
"Bed temperature for layers after the first one. Set this to zero to disable "
"bed temperature control commands in the output."
msgstr "第一個圖層後的層的牀溫。將此設置爲零, 以禁用輸出中的牀溫控制命令。"


#: src/libslic3r/PrintConfig.cpp:254
msgid "Bed temperature"
msgstr "機牀溫度"


#: src/libslic3r/PrintConfig.cpp:261
msgid "Before layer change G-code"
msgstr "層改變前的G代碼"


#: src/libslic3r/PrintConfig.cpp:263
msgid ""
"This custom code is inserted at every layer change, right before the Z move. "
"Note that you can use placeholder variables for all Slic3r settings as well "
"as [layer_num] and [layer_z]."
msgstr ""
"這段自定義代碼在層改變，即Z軸移動前插入。注意除了可以使用[layer_num]和"
"[layer_z]，也可以使用佔位符變量替代所有的slic3r設置。"


#: src/libslic3r/PrintConfig.cpp:273
msgid "Between objects G-code"
msgstr "對象之間的 G-code"


#: src/libslic3r/PrintConfig.cpp:275
msgid ""
"This code is inserted between objects when using sequential printing. By "
"default extruder and bed temperature are reset using non-wait command; "
"however if M104, M109, M140 or M190 are detected in this custom code, Slic3r "
"will not add temperature commands. Note that you can use placeholder "
"variables for all Slic3r settings, so you can put a \"M109 S"
"[first_layer_temperature]\" command wherever you want."
msgstr ""
"使用順序列印時, 此代碼將插入對象之間。默認情況下, 使用非等待命令重置擠出機和"
"牀溫;但是, 如果在此自定義代碼中檢測到 m104、m109、m140 或 m190, Slic3r 將不會"
"添加溫度命令。請注意, 您可以對所有 Slic3r 設置使用佔位符變量, 因此您可以將  "
"\"M109 S[first_layer_temperature]\" 命令放在任何需要的地方。"


#: src/libslic3r/PrintConfig.cpp:286
msgid "Number of solid layers to generate on bottom surfaces."
msgstr "底部表面生成的可靠層數。"


#: src/libslic3r/PrintConfig.cpp:287
msgid "Bottom solid layers"
msgstr "底部可靠層"


#: src/libslic3r/PrintConfig.cpp:302 src/libslic3r/PrintConfig.cpp:352
msgid "Bridge"
msgstr "橋"


#: src/libslic3r/PrintConfig.cpp:315
msgid "Bridging angle"
msgstr "橋接角度"


#: src/libslic3r/PrintConfig.cpp:317
msgid ""
"Bridging angle override. If left to zero, the bridging angle will be "
"calculated automatically. Otherwise the provided angle will be used for all "
"bridges. Use 180° for zero angle."
msgstr ""
"橋接角度覆蓋。如果保持爲零, 則將自動計算橋接角度。否則, 所提供的角度將用於所"
"有橋樑。使用180°實現零角度。"


#: src/libslic3r/PrintConfig.cpp:326
msgid "Bridges fan speed"
msgstr "橋風扇速度"


#: src/libslic3r/PrintConfig.cpp:353
msgid "Bridge flow ratio"
msgstr "橋流量比"


#: src/libslic3r/PrintConfig.cpp:356
msgid ""
"This factor affects the amount of plastic for bridging. You can decrease it "
"slightly to pull the extrudates and prevent sagging, although default "
"settings are usually good and you should experiment with cooling (use a fan) "
"before tweaking this."
msgstr ""
"此因素影響橋接部位的塑料用量。可以略微減少該值以回撤擠出物避免滴垂。但默認設"
"置通常來說已經可以滿足使用，在修改前需通過冷卻（使用風扇）進行測試。"


#: src/libslic3r/PrintConfig.cpp:390
msgid "Bridges"
msgstr "橋接處"


#: src/libslic3r/PrintConfig.cpp:393
msgid "Speed for printing bridges."
msgstr "列印橋接處的速度。"


#: src/libslic3r/PrintConfig.cpp:394 src/libslic3r/PrintConfig.cpp:405
#: src/libslic3r/PrintConfig.cpp:1226 src/libslic3r/PrintConfig.cpp:1262
#: src/libslic3r/PrintConfig.cpp:1353 src/libslic3r/PrintConfig.cpp:1362
#: src/libslic3r/PrintConfig.cpp:1370 src/libslic3r/PrintConfig.cpp:1397
#: src/libslic3r/PrintConfig.cpp:1416 src/libslic3r/PrintConfig.cpp:1868
#: src/libslic3r/PrintConfig.cpp:2193 src/libslic3r/PrintConfig.cpp:2276
#: src/libslic3r/PrintConfig.cpp:2409 src/libslic3r/PrintConfig.cpp:2443
#: src/libslic3r/PrintConfig.cpp:2455 src/libslic3r/PrintConfig.cpp:2465
#: src/libslic3r/PrintConfig.cpp:2530 src/libslic3r/PrintConfig.cpp:2637
#: src/libslic3r/PrintConfig.cpp:2747 src/libslic3r/PrintConfig.cpp:2893
#: src/libslic3r/PrintConfig.cpp:3125 src/libslic3r/PrintConfig.cpp:3135
#: src/libslic3r/PrintConfig.cpp:3790 src/libslic3r/PrintConfig.cpp:3914
#: src/libslic3r/PrintConfig.cpp:4030 src/libslic3r/PrintConfig.cpp:4511
msgid "mm/s"
msgstr "mm/s"


#: src/libslic3r/PrintConfig.cpp:420
msgid "Brim width"
msgstr "裙邊寬度"


#: src/libslic3r/PrintConfig.cpp:422
msgid ""
"Horizontal width of the brim that will be printed around each object on the "
"first layer."
msgstr "第一層每個物體周圍列印的裙邊水平寬度。"


#: src/libslic3r/PrintConfig.cpp:468 src/libslic3r/PrintConfig.cpp:1612
#: src/libslic3r/PrintConfig.cpp:3739 src/libslic3r/PrintConfig.cpp:3754
msgid "Pattern"
msgstr "樣式"


#: src/libslic3r/PrintConfig.cpp:476 src/libslic3r/PrintConfig.cpp:727
#: src/libslic3r/PrintConfig.cpp:755 src/libslic3r/PrintConfig.cpp:783
#: src/libslic3r/PrintConfig.cpp:1641 src/libslic3r/PrintConfig.cpp:3768
msgid "Concentric"
msgstr "同軸式"


#: src/libslic3r/PrintConfig.cpp:477 src/libslic3r/PrintConfig.cpp:724
#: src/libslic3r/PrintConfig.cpp:752 src/libslic3r/PrintConfig.cpp:780
#: src/libslic3r/PrintConfig.cpp:1634 src/libslic3r/PrintConfig.cpp:3747
#: src/libslic3r/PrintConfig.cpp:3766
msgid "Rectilinear"
msgstr "折線式"


#: src/libslic3r/PrintConfig.cpp:502
msgid "Clip multi-part objects"
msgstr "剪切多部分對象"


#: src/libslic3r/PrintConfig.cpp:504
msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""
"列印多材料對象時, 此設置將使 slic3r 將一個接一個地剪裁重疊對象部分 (第二部分"
"將被第1部分裁剪, 第3部分將被第1和第2部分裁剪)。"


#: src/libslic3r/PrintConfig.cpp:511
msgid "Colorprint height"
msgstr "彩色列印高度"


#: src/libslic3r/PrintConfig.cpp:513
msgid "Heights at which a filament change is to occur. "
msgstr "將發生耗材絲變化的高度. "


#: src/libslic3r/PrintConfig.cpp:523
msgid "Compatible printers condition"
msgstr "兼容的印表機條件"


#: src/libslic3r/PrintConfig.cpp:524
msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"使用中的印表機配置文件的配置值的布爾表達式。如果此表達式的計算結果爲 true, 則"
"此配置文件被視爲與活動印表機配置文件兼容。"


#: src/libslic3r/PrintConfig.cpp:538
msgid "Compatible print profiles condition"
msgstr "兼容的列印配置文件條件"


#: src/libslic3r/PrintConfig.cpp:539
msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"使用中的列印配置文件的配置值的布爾表達式。如果此表達式的計算結果爲 true, 則此"
"配置文件被視爲與活動列印配置文件兼容。"


#: src/libslic3r/PrintConfig.cpp:556
msgid "Complete individual objects"
msgstr "列印完成單個物體"


#: src/libslic3r/PrintConfig.cpp:558
msgid ""
"When printing multiple objects or copies, this feature will complete each "
"object before moving onto next one (and starting it from its bottom layer). "
"This feature is useful to avoid the risk of ruined prints. Slic3r should "
"warn and prevent you from extruder collisions, but beware."
msgstr ""
"勾選此項表示當列印多個物體或複製體時，先列印完一整個物體再繼續列印後續物體"
"（從底層開始）。此選項利於避免打毀掉物體。Slic3r應該給出警示，避免擠出頭碰"
"撞，但請小心。"


#: src/libslic3r/PrintConfig.cpp:592
msgid "Enable auto cooling"
msgstr "自動冷卻使能"


#: src/libslic3r/PrintConfig.cpp:594
msgid ""
"This flag enables the automatic cooling logic that adjusts print speed and "
"fan speed according to layer printing time."
msgstr "該選項啓動自動冷卻，使得可根據層列印時間調整列印速度和風扇速度。"


#: src/libslic3r/PrintConfig.cpp:600
msgid "Cooling tube position"
msgstr "冷卻管位置"


#: src/libslic3r/PrintConfig.cpp:602
msgid "Distance of the center-point of the cooling tube from the extruder tip."
msgstr "冷卻管中心點與擠出機尖端的距離."


#: src/libslic3r/PrintConfig.cpp:609
msgid "Cooling tube length"
msgstr "冷卻管長度"


#: src/libslic3r/PrintConfig.cpp:611
msgid "Length of the cooling tube to limit space for cooling moves inside it."
msgstr "冷卻管的長度, 以限制冷卻內的移動空間."


#: src/libslic3r/PrintConfig.cpp:631
msgid "Default filament profile"
msgstr "默認耗材絲配置"


#: src/libslic3r/PrintConfig.cpp:632
msgid ""
"Default filament profile associated with the current printer profile. On "
"selection of the current printer profile, this filament profile will be "
"activated."
msgstr ""
"與當前印表機配置文件關聯的默認耗材絲配置文件。在選擇當前印表機配置文件時, 將"
"激活此耗材絲絲配置文件。"


#: src/libslic3r/PrintConfig.cpp:638
msgid "Default print profile"
msgstr "默認 SLA 列印配置文件"


#: src/libslic3r/PrintConfig.cpp:639 src/libslic3r/PrintConfig.cpp:4763
#: src/libslic3r/PrintConfig.cpp:4774
msgid ""
"Default print profile associated with the current printer profile. On "
"selection of the current printer profile, this print profile will be "
"activated."
msgstr ""
"與當前印表機配置文件關聯的默認列印配置文件。在選擇當前印表機配置文件時, 將激"
"活此列印配置文件。"


#: src/libslic3r/PrintConfig.cpp:645
msgid "Disable fan for the first"
msgstr "前幾層禁用風扇"


#: src/libslic3r/PrintConfig.cpp:647
msgid ""
"You can set this to a positive value to disable fan at all during the first "
"layers, so that it does not make adhesion worse."
msgstr ""
"您可以將其設置爲正值, 以便在第一層期間完全禁用風扇, 這樣就不會使粘附變得更"
"糟。"


#: src/libslic3r/PrintConfig.cpp:656
msgid "Don't support bridges"
msgstr "不支持橋接"


#: src/libslic3r/PrintConfig.cpp:658
msgid ""
"Experimental option for preventing support material from being generated "
"under bridged areas."
msgstr "試驗項，在橋接處禁止生成支撐材料。"


#: src/libslic3r/PrintConfig.cpp:666
msgid "Distance used for the auto-arrange feature of the plater."
msgstr "自動分佈時所使用的距離。"


#: src/libslic3r/PrintConfig.cpp:673 src/libslic3r/PrintConfig.cpp:684
msgid "End G-code"
msgstr "結尾G代碼"


#: src/libslic3r/PrintConfig.cpp:675
msgid ""
"This end procedure is inserted at the end of the output file. Note that you "
"can use placeholder variables for all Slic3r settings."
msgstr "該部分將插入到輸出文件的結尾。注意可對所有的Slic3r參數使用佔位符變量。"


#: src/libslic3r/PrintConfig.cpp:698
msgid "Ensure vertical shell thickness"
msgstr "確保垂直外殼厚度"


#: src/libslic3r/PrintConfig.cpp:700
msgid ""
"Add solid infill near sloping surfaces to guarantee the vertical shell "
"thickness (top+bottom solid layers)."
msgstr "在傾斜表面附近添加實心填充, 以保證垂直外殼厚度 (頂部 + 底部實心層)。"


#: src/libslic3r/PrintConfig.cpp:709
msgid ""
"Fill pattern for top infill. This only affects the top visible layer, and "
"not its adjacent solid shells."
msgstr "填充模式的頂部填充。這隻影響頂部可見層, 而不影響其相鄰的實體外殼。"


#: src/libslic3r/PrintConfig.cpp:729 src/libslic3r/PrintConfig.cpp:757
#: src/libslic3r/PrintConfig.cpp:785 src/libslic3r/PrintConfig.cpp:1645
#: src/libslic3r/PrintConfig.cpp:3770
msgid "Hilbert Curve"
msgstr "希爾伯特曲線式"


#: src/libslic3r/PrintConfig.cpp:730 src/libslic3r/PrintConfig.cpp:758
#: src/libslic3r/PrintConfig.cpp:786 src/libslic3r/PrintConfig.cpp:1646
msgid "Archimedean Chords"
msgstr "阿基米德和鉉式"


#: src/libslic3r/PrintConfig.cpp:731 src/libslic3r/PrintConfig.cpp:759
#: src/libslic3r/PrintConfig.cpp:787 src/libslic3r/PrintConfig.cpp:1647
msgid "Octagram Spiral"
msgstr "八角星螺旋式"


#: src/libslic3r/PrintConfig.cpp:738
msgid "Bottom fill pattern"
msgstr "底部填充圖案"


#: src/libslic3r/PrintConfig.cpp:824 src/libslic3r/PrintConfig.cpp:838
msgid "External perimeters"
msgstr "外圍輪廓"


#: src/libslic3r/PrintConfig.cpp:830 src/libslic3r/PrintConfig.cpp:843
#: src/libslic3r/PrintConfig.cpp:1160 src/libslic3r/PrintConfig.cpp:1173
#: src/libslic3r/PrintConfig.cpp:1744 src/libslic3r/PrintConfig.cpp:1758
#: src/libslic3r/PrintConfig.cpp:1773 src/libslic3r/PrintConfig.cpp:1983
#: src/libslic3r/PrintConfig.cpp:2139 src/libslic3r/PrintConfig.cpp:2153
#: src/libslic3r/PrintConfig.cpp:2183 src/libslic3r/PrintConfig.cpp:2627
#: src/libslic3r/PrintConfig.cpp:2866 src/libslic3r/PrintConfig.cpp:2880
#: src/libslic3r/PrintConfig.cpp:3279 src/libslic3r/PrintConfig.cpp:3293
#: src/libslic3r/PrintConfig.cpp:3390 src/libslic3r/PrintConfig.cpp:3404
#: src/libslic3r/PrintConfig.cpp:3586 src/libslic3r/PrintConfig.cpp:3685
#: src/libslic3r/PrintConfig.cpp:3967 src/libslic3r/PrintConfig.cpp:3980
#: src/libslic3r/PrintConfig.cpp:4493 src/libslic3r/PrintConfig.cpp:4502
msgid "mm or %"
msgstr "mm 或 %"


#: src/libslic3r/PrintConfig.cpp:922
msgid ""
"This separate setting will affect the speed of external perimeters (the "
"visible ones). If expressed as percentage (for example: 80%) it will be "
"calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"此單獨設置將影響外圍輪廓 (可見的表面) 的速度。如果以百分比表示 (例如: 80%)它"
"將在上面的周界速度設置上計算。自動設置爲零。"


#: src/libslic3r/PrintConfig.cpp:925 src/libslic3r/PrintConfig.cpp:1788
#: src/libslic3r/PrintConfig.cpp:1802 src/libslic3r/PrintConfig.cpp:3267
#: src/libslic3r/PrintConfig.cpp:3419 src/libslic3r/PrintConfig.cpp:3732
#: src/libslic3r/PrintConfig.cpp:3997
msgid "mm/s or %"
msgstr "mm/s 或 %"


#: src/libslic3r/PrintConfig.cpp:933
msgid "External perimeters first"
msgstr "先列印外圍輪廓"


#: src/libslic3r/PrintConfig.cpp:935
msgid ""
"Print contour perimeters from the outermost one to the innermost one instead "
"of the default inverse order."
msgstr "從最外圍輪廓向最內部的輪廓列印，而不是反方向。"


#: src/libslic3r/PrintConfig.cpp:981 src/libslic3r/PrintConfig.cpp:3140
msgid "Seam position"
msgstr "接合位置"


#: src/libslic3r/PrintConfig.cpp:984
msgid "Position of perimeters starting points."
msgstr "輪廓開始點的位置。"


#: src/libslic3r/PrintConfig.cpp:988
msgid "Nearest"
msgstr "最近的"


#: src/libslic3r/PrintConfig.cpp:1042
msgid ""
"The extruder to use (unless more specific extruder settings are specified). "
"This value overrides perimeter and infill extruders, but not the support "
"extruders."
msgstr ""
"要使用的擠出機 (除非指定了更具體的擠出機設置)。此值覆蓋外圍和填充擠出機, 但不"
"覆蓋支持擠出機。"


#: src/libslic3r/PrintConfig.cpp:1060
msgid ""
"Set this to the vertical distance between your nozzle tip and (usually) the "
"X carriage rods. In other words, this is the height of the clearance "
"cylinder around your extruder, and it represents the maximum depth the "
"extruder can peek before colliding with other printed objects."
msgstr ""
"設置爲噴嘴尖端和（通常）X架杆之間的垂直距離。換句話說，這是在你的擠出機周圍的"
"空隙氣缸的高度，它代表了擠出頭在與其他印列印物體碰撞前科達到的最大深度。"


#: src/libslic3r/PrintConfig.cpp:1073
msgid ""
"Set this to the clearance radius around your extruder. If the extruder is "
"not centered, choose the largest value for safety. This setting is used to "
"check for collisions and to display the graphical preview in the plater."
msgstr ""
"設置爲擠出頭周圍的空隙半徑。如果擠出頭未置中，安全起見請選擇最大值。該參數用"
"於檢查碰撞，並在界面中顯示圖形預覽。"


#: src/libslic3r/PrintConfig.cpp:1083
msgid "Extruder Color"
msgstr "擠出頭顏色"


#: src/libslic3r/PrintConfig.cpp:1085 src/libslic3r/PrintConfig.cpp:1205
msgid "This is only used in the Slic3r interface as a visual help."
msgstr "僅提供Slic3r界面的視覺幫助。"


#: src/libslic3r/PrintConfig.cpp:1092
msgid "Extruder offset"
msgstr "擠出頭偏置"


#: src/libslic3r/PrintConfig.cpp:1094 src/libslic3r/PrintConfig.cpp:4436
msgid ""
"If your firmware doesn't handle the extruder displacement you need the G-"
"code to take it into account. This option lets you specify the displacement "
"of each extruder with respect to the first one. It expects positive "
"coordinates (they will be subtracted from the XY coordinate)."
msgstr ""
"如果你的固件不能處理擠出頭的位移量，需要使用G代碼將其考慮進去。該選項可讓你細"
"化每個擠出頭相對第一個擠出頭的位移量。一般爲正座標（它們將從XY座標相減得"
"到）。"


#: src/libslic3r/PrintConfig.cpp:1122
msgid "Extrusion axis"
msgstr "擠出軸"


#: src/libslic3r/PrintConfig.cpp:1124
msgid ""
"Use this option to set the axis letter associated to your printer's extruder "
"(usually E but some printers use A)."
msgstr ""
"使用該項設置你的印表機擠出頭的軸所用字母（一般爲E，但有的印表機使用A)。"


#: src/libslic3r/PrintConfig.cpp:1129 src/libslic3r/PrintConfig.cpp:1140
msgid "Extrusion multiplier"
msgstr "擠出倍數"


#: src/libslic3r/PrintConfig.cpp:1131
msgid ""
"This factor changes the amount of flow proportionally. You may need to tweak "
"this setting to get nice surface finish and correct single wall widths. "
"Usual values are between 0.9 and 1.1. If you think you need to change this "
"more, check filament diameter and your firmware E steps."
msgstr ""
"該選項按比例改變流量。你可能需要調整該設置來獲取更好的表面尾處理，更正單層牆"
"的寬度。通常值範圍在0.9到1.1之間。如果你覺得有必要更改幅度更大，檢查絲料直徑"
"和你的固件E步驟。"


#: src/libslic3r/PrintConfig.cpp:1154
msgid "Default extrusion width"
msgstr "默認擠出寬度"


#: src/libslic3r/PrintConfig.cpp:1182
msgid "Keep fan always on"
msgstr "保持風扇總是打開"


#: src/libslic3r/PrintConfig.cpp:1190
msgid "Enable fan if layer print time is below"
msgstr "如果列印時間低於該值，則氣動風扇"


#: src/libslic3r/PrintConfig.cpp:1195 src/libslic3r/PrintConfig.cpp:3254
msgid "approximate seconds"
msgstr "秒（大約）"


#: src/libslic3r/PrintConfig.cpp:1211
msgid "Filament notes"
msgstr "絲料備註"


#: src/libslic3r/PrintConfig.cpp:1213
msgid "You can put your notes regarding the filament here."
msgstr "關於材料的備註可放這裏。"


#: src/libslic3r/PrintConfig.cpp:1232 src/libslic3r/PrintConfig.cpp:2546
msgid "Max volumetric speed"
msgstr "最大體積速度"


#: src/libslic3r/PrintConfig.cpp:1234
msgid ""
"Maximum volumetric speed allowed for this filament. Limits the maximum "
"volumetric speed of a print to the minimum of print and filament volumetric "
"speed. Set to zero for no limit."
msgstr ""
"該材料所允許的最大體積速度。把最大體積速度限定爲列印速度和材料體積速度的最小"
"值。設爲0則無限制。"


#: src/libslic3r/PrintConfig.cpp:1260
msgid "Loading speed"
msgstr "加載速度"


#: src/libslic3r/PrintConfig.cpp:1261
msgid "Speed used for loading the filament on the wipe tower. "
msgstr "用於在擦拭塔上加載耗材絲的速度. "


#: src/libslic3r/PrintConfig.cpp:1351
msgid "Loading speed at the start"
msgstr "啓動時的加載速度"


#: src/libslic3r/PrintConfig.cpp:1352
msgid "Speed used at the very beginning of loading phase. "
msgstr "加載階段開始時使用的速度. "


#: src/libslic3r/PrintConfig.cpp:1359
msgid "Unloading speed"
msgstr "卸載速度"


#: src/libslic3r/PrintConfig.cpp:1360
msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming). "
msgstr "用於擦料塔上耗材絲的速度 (不影響撞擊後卸載的初始部分). "


#: src/libslic3r/PrintConfig.cpp:1368
msgid "Unloading speed at the start"
msgstr "啓動時卸載速度"


#: src/libslic3r/PrintConfig.cpp:1369
msgid ""
"Speed used for unloading the tip of the filament immediately after ramming. "
msgstr "用於在撞擊後立即卸載細絲尖端的速度. "


#: src/libslic3r/PrintConfig.cpp:1376
msgid "Delay after unloading"
msgstr "卸載後的延遲"


#: src/libslic3r/PrintConfig.cpp:1377
msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions. "
msgstr ""
"耗材絲卸掉後的等待時間。有助於使用柔性材料時的工具切換, 這些材料可能需要更多"
"的時間來縮小到原始尺寸. "


#: src/libslic3r/PrintConfig.cpp:1386
msgid "Number of cooling moves"
msgstr "冷卻移動次數"


#: src/libslic3r/PrintConfig.cpp:1387
msgid ""
"Filament is cooled by being moved back and forth in the cooling tubes. "
"Specify desired number of these moves."
msgstr "耗材絲是通過在冷卻管中來回移動來冷卻的。指定這些移動的所需數量."


#: src/libslic3r/PrintConfig.cpp:1395
msgid "Speed of the first cooling move"
msgstr "第一次冷卻運動的速度"


#: src/libslic3r/PrintConfig.cpp:1396
msgid "Cooling moves are gradually accelerating beginning at this speed. "
msgstr "冷卻動作正以這樣的速度逐漸開始加速. "


#: src/libslic3r/PrintConfig.cpp:1403
msgid "Minimal purge on wipe tower"
msgstr "擦拭塔上的最小清理量"


#: src/libslic3r/PrintConfig.cpp:1404
msgid ""
"After a tool change, the exact position of the newly loaded filament inside "
"the nozzle may not be known, and the filament pressure is likely not yet "
"stable. Before purging the print head into an infill or a sacrificial "
"object, Slic3r will always prime this amount of material into the wipe tower "
"to produce successive infill or sacrificial object extrusions reliably."
msgstr ""
"換料後, 新加載的耗材絲在噴嘴內的確切位置可能尚不清楚, 而且耗材絲壓力可能尚不"
"穩定。在將列印頭清洗成填充物或填充對象之前, Slic3r 將始終將這些數量的材料放入"
"擦拭塔中, 以可靠地產生連續的填充物或填充對象。"


#: src/libslic3r/PrintConfig.cpp:1408
msgid "mm³"
msgstr "mm³"


#: src/libslic3r/PrintConfig.cpp:1414
msgid "Speed of the last cooling move"
msgstr "最後一次冷卻移動的速度"


#: src/libslic3r/PrintConfig.cpp:1415
msgid "Cooling moves are gradually accelerating towards this speed. "
msgstr "冷卻動作會逐漸加速到這個速度. "


#: src/libslic3r/PrintConfig.cpp:1422
msgid "Filament load time"
msgstr "耗材絲加載時間"


#: src/libslic3r/PrintConfig.cpp:1423
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to load a new "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"印表機固件 (或Multi Material Unit 2.0) 在工具更換期間 (執行 T 代碼時) 加載新"
"耗材絲的時間。 G-code時間估計器將此時間添加到總列印時間中。"


#: src/libslic3r/PrintConfig.cpp:1430
msgid "Ramming parameters"
msgstr "衝壓參數"


#: src/libslic3r/PrintConfig.cpp:1431
msgid ""
"This string is edited by RammingDialog and contains ramming specific "
"parameters."
msgstr "此字符串由 RammingDialog 編輯, 幷包含衝壓特定參數."


#: src/libslic3r/PrintConfig.cpp:1437
msgid "Filament unload time"
msgstr "耗材絲卸載時間"


#: src/libslic3r/PrintConfig.cpp:1438
msgid ""
"Time for the printer firmware (or the Multi Material Unit 2.0) to unload a "
"filament during a tool change (when executing the T code). This time is "
"added to the total print time by the G-code time estimator."
msgstr ""
"印表機固件 (或Multi Material Unit 2.0) 在工具更換期間 (執行 T 代碼時) 卸載耗"
"材絲的時間。 G-code時間估計器將此時間添加到總列印時間中。"


#: src/libslic3r/PrintConfig.cpp:1446
msgid ""
"Enter your filament diameter here. Good precision is required, so use a "
"caliper and do multiple measurements along the filament, then compute the "
"average."
msgstr ""
"在這裏輸入你的材料直徑。需要較高精度，所以請使用卡尺，沿着材料長絲做多次測"
"量，計算平均值。"


#: src/libslic3r/PrintConfig.cpp:1465 src/libslic3r/PrintConfig.cpp:4674
#: src/libslic3r/PrintConfig.cpp:4675
msgid "Density"
msgstr "密度"


#: src/libslic3r/PrintConfig.cpp:1467
msgid ""
"Enter your filament density here. This is only for statistical information. "
"A decent way is to weigh a known length of filament and compute the ratio of "
"the length to volume. Better is to calculate the volume directly through "
"displacement."
msgstr ""
"在這裏輸入你的絲料密度。此僅爲統計信息。一個不錯的方法是測量一段已知長度絲料"
"的重量，然後計算體積。更好的方法式直接通過位移計算體積。"


#: src/libslic3r/PrintConfig.cpp:1470
msgid "g/cm³"
msgstr "g/cm³"


#: src/libslic3r/PrintConfig.cpp:1476
msgid "Filament type"
msgstr "耗材類型"


#: src/libslic3r/PrintConfig.cpp:1478
msgid "The filament material type for use in custom G-codes."
msgstr "用於自定義 G-codes的耗材絲材料類型。"


#: src/libslic3r/PrintConfig.cpp:1514
msgid "Soluble material"
msgstr "可溶性材料"


#: src/libslic3r/PrintConfig.cpp:1516
msgid "Soluble material is most likely used for a soluble support."
msgstr "可溶性材料最可能用於可溶性支撐。"


#: src/libslic3r/PrintConfig.cpp:1524
msgid ""
"Enter your filament cost per kg here. This is only for statistical "
"information."
msgstr "在這裏輸入絲料每公斤的價格。僅用於統計信息。"


#: src/libslic3r/PrintConfig.cpp:1525
msgid "money/kg"
msgstr "¥/kg"


#: src/libslic3r/PrintConfig.cpp:1550
msgid "Fill angle"
msgstr "填充角度"


#: src/libslic3r/PrintConfig.cpp:1552
msgid ""
"Default base angle for infill orientation. Cross-hatching will be applied to "
"this. Bridges will be infilled using the best direction Slic3r can detect, "
"so this setting does not affect them."
msgstr ""
"填充的默認基礎方向角。交叉引線適用於此。橋接處將使用Slic3r所偵測的最好方向來"
"填充，所以此參數不影響它們。"


#: src/libslic3r/PrintConfig.cpp:1577
msgid "Fill density"
msgstr "填充密度"


#: src/libslic3r/PrintConfig.cpp:1579
#, possible-c-format
msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr "內部填充的密度，以0% - 100% 表示。"


#: src/libslic3r/PrintConfig.cpp:1613
msgid "Fill pattern"
msgstr "填充樣式"


#: src/libslic3r/PrintConfig.cpp:1615
msgid "Fill pattern for general low-density infill."
msgstr "一般低密度填充的填充樣式。"


#: src/libslic3r/PrintConfig.cpp:1636
msgid "Grid"
msgstr "網格"


#: src/libslic3r/PrintConfig.cpp:1637
msgid "Triangles"
msgstr "三角形"


#: src/libslic3r/PrintConfig.cpp:1638
msgid "Stars"
msgstr "星級"


#: src/libslic3r/PrintConfig.cpp:1639
msgid "Cubic"
msgstr "立方體"


#: src/libslic3r/PrintConfig.cpp:1640
msgid "Line"
msgstr "線"


#: src/libslic3r/PrintConfig.cpp:1642 src/libslic3r/PrintConfig.cpp:3749
msgid "Honeycomb"
msgstr "蜂窩"


#: src/libslic3r/PrintConfig.cpp:1643
msgid "3D Honeycomb"
msgstr "3D 蜂窩"


#: src/libslic3r/PrintConfig.cpp:1644
msgid "Gyroid"
msgstr "螺旋形"


#: src/libslic3r/PrintConfig.cpp:1664 src/libslic3r/PrintConfig.cpp:1676
#: src/libslic3r/PrintConfig.cpp:1713 src/libslic3r/PrintConfig.cpp:1725
#: src/libslic3r/PrintConfig.cpp:1736 src/libslic3r/PrintConfig.cpp:1753
#: src/libslic3r/PrintConfig.cpp:1809
msgid "First layer"
msgstr "首層"


#: src/libslic3r/PrintConfig.cpp:1728
msgid ""
"Heated build plate temperature for the first layer. Set this to zero to "
"disable bed temperature control commands in the output."
msgstr "首層的加熱板溫度。設爲0，可在輸出中禁用機牀溫度控制指令。"


#: src/libslic3r/PrintConfig.cpp:1874
msgid "Verbose G-code"
msgstr "詳細的G代碼"


#: src/libslic3r/PrintConfig.cpp:1876
msgid ""
"Enable this to get a commented G-code file, with each line explained by a "
"descriptive text. If you print from SD card, the additional weight of the "
"file could make your firmware slow down."
msgstr ""
"啓動該項可獲得帶註釋的G代碼文件，每一行都有對應的解釋性文字。如果從SD卡列印，"
"文件冗餘部分可能減緩你的固件運行速度。"


#: src/libslic3r/PrintConfig.cpp:1883
msgid "G-code flavor"
msgstr "G代碼風格"


#: src/libslic3r/PrintConfig.cpp:1885
msgid ""
"Some G/M-code commands, including temperature control and others, are not "
"universal. Set this option to your printer's firmware to get a compatible "
"output. The \"No extrusion\" flavor prevents Slic3r from exporting any "
"extrusion value at all."
msgstr ""
"一些 G/M 代碼的指令，包括溫度控制和其他，但不通用。將此項設爲印表機的固件來獲"
"取兼容性的輸出。“無擠出”選項使得Slic3r不輸出任何擠出值。"


#: src/libslic3r/PrintConfig.cpp:1914
msgid "No extrusion"
msgstr "無擠出"


#: src/libslic3r/PrintConfig.cpp:1943
msgid "High extruder current on filament swap"
msgstr "耗材絲切換時的高擠出機電流"


#: src/libslic3r/PrintConfig.cpp:1945
msgid ""
"It may be beneficial to increase the extruder motor current during the "
"filament exchange sequence to allow for rapid ramming feed rates and to "
"overcome resistance when loading a filament with an ugly shaped tip."
msgstr ""
"在耗材絲切換序列中增加擠出機電機電流可能是有益的, 這樣可以快速衝擊進料速度, "
"並在用不良形狀的尖端加載耗材絲時克服阻力。"


#: src/libslic3r/PrintConfig.cpp:1964
msgid "Combine infill every"
msgstr "每幾層聯合填充"


#: src/libslic3r/PrintConfig.cpp:1966
msgid ""
"This feature allows to combine infill and speed up your print by extruding "
"thicker infill layers while preserving thin perimeters, thus accuracy."
msgstr ""
"該功能可通過擠出更厚的填充層來實現聯合填充，並加速列印，同時保留了薄壁，也就"
"保證了精度。"


#: src/libslic3r/PrintConfig.cpp:1969
msgid "Combine infill every n layers"
msgstr "混合填充每 n 個層"


#: src/libslic3r/PrintConfig.cpp:2124
msgid "Infill extruder"
msgstr "填充擠出頭"


#: src/libslic3r/PrintConfig.cpp:2126
msgid "The extruder to use when printing infill."
msgstr "列印填充時使用的擠出頭。"


#: src/libslic3r/PrintConfig.cpp:2162
msgid "Infill before perimeters"
msgstr "先填充後列印輪廓"


#: src/libslic3r/PrintConfig.cpp:2164
msgid ""
"This option will switch the print order of perimeters and infill, making the "
"latter first."
msgstr "該選項將列印輪廓和填充的方式對調，使後者提前。"


#: src/libslic3r/PrintConfig.cpp:2169
msgid "Only infill where needed"
msgstr "僅在需要時填充"


#: src/libslic3r/PrintConfig.cpp:2171
msgid ""
"This option will limit infill to the areas actually needed for supporting "
"ceilings (it will act as internal support material). If enabled, slows down "
"the G-code generation due to the multiple checks involved."
msgstr ""
"該選項將把填充限定用於支撐天花板（將充當內部支撐材料的作用）。如果啓用，由於"
"多個包含的選項將使G代碼生成速度變慢。"


#: src/libslic3r/PrintConfig.cpp:2178
msgid "Infill/perimeters overlap"
msgstr "填充/輪廓重疊"


#: src/libslic3r/PrintConfig.cpp:2180
msgid ""
"This setting applies an additional overlap between infill and perimeters for "
"better bonding. Theoretically this shouldn't be needed, but backlash might "
"cause gaps. If expressed as percentage (example: 15%) it is calculated over "
"perimeter extrusion width."
msgstr ""
"使得填充和輪廓間有額外的重疊部分，便於結合。理論上並不需要，但偏移可能會導致"
"間隙。如果表示爲百分數（如15%），則以輪廓擠出寬度爲基準。"


#: src/libslic3r/PrintConfig.cpp:2192
msgid "Speed for printing the internal fill. Set to zero for auto."
msgstr "列印內部填充的速度。零爲自動設置。"


#: src/libslic3r/PrintConfig.cpp:2200
msgid "Inherits profile"
msgstr "繼承配置文件"


#: src/libslic3r/PrintConfig.cpp:2201
msgid "Name of the profile, from which this profile inherits."
msgstr "此配置文件從中繼承的配置文件的名稱。"


#: src/libslic3r/PrintConfig.cpp:2214
msgid "Interface shells"
msgstr "表面外殼"


#: src/libslic3r/PrintConfig.cpp:2215
msgid ""
"Force the generation of solid shells between adjacent materials/volumes. "
"Useful for multi-extruder prints with translucent materials or manual "
"soluble support material."
msgstr ""
"在相鄰的材料/包圍體之間強制生成可靠外殼層。適用於使用半透明材料或手工可溶性支"
"撐材料的多擠出頭列印。"


#: src/libslic3r/PrintConfig.cpp:2282 src/libslic3r/PrintConfig.cpp:2295
msgid "After layer change G-code"
msgstr "層變化後G代碼"


#: src/libslic3r/PrintConfig.cpp:2284
msgid ""
"This custom code is inserted at every layer change, right after the Z move "
"and before the extruder moves to the first layer point. Note that you can "
"use placeholder variables for all Slic3r settings as well as [layer_num] and "
"[layer_z]."
msgstr ""
"這段G代碼在每一層變化後，即Z軸移動後，擠出頭移動到第一層的點之前插入。注意除"
"了使用如[layer_num]和[layer_z]，也可以使用佔位符變量來代替Slic3r的參數。"


#: src/libslic3r/PrintConfig.cpp:2316
msgid "Supports remaining times"
msgstr "支撐剩餘時間"


#: src/libslic3r/PrintConfig.cpp:2318
msgid ""
"Emit M73 P[percent printed] R[remaining time in minutes] at 1 minute "
"intervals into the G-code to let the firmware show accurate remaining time. "
"As of now only the Prusa i3 MK3 firmware recognizes M73. Also the i3 MK3 "
"firmware supports M73 Qxx Sxx for the silent mode."
msgstr ""
"以1分鐘的間隔發出M73 P[percent printed] R[remaining time in minutes]  進入 G-"
"code , 讓固件顯示準確的剩餘時間。到目前爲止, 只有 Prusa i3 MK3 固件識別 M73。"
"此外, i3 MK3 固件支持 M73 Qxx Sxx  的靜音模式。"


#: src/libslic3r/PrintConfig.cpp:2426 src/libslic3r/PrintConfig.cpp:2475
#: src/libslic3r/PrintConfig.cpp:2485 src/libslic3r/PrintConfig.cpp:2495
msgid "mm/s²"
msgstr "mm/s²"


#: src/libslic3r/PrintConfig.cpp:2452
msgid "Minimum feedrate when extruding"
msgstr "擠出時的最小進給率"


#: src/libslic3r/PrintConfig.cpp:2462
msgid "Minimum travel feedrate"
msgstr "最小移動進給率"


#: src/libslic3r/PrintConfig.cpp:2472
msgid "Maximum acceleration when extruding"
msgstr "擠出時的最大加速度"


#: src/libslic3r/PrintConfig.cpp:2482
msgid "Maximum acceleration when retracting"
msgstr "回縮時的最大加速度"


#: src/libslic3r/PrintConfig.cpp:2501 src/libslic3r/PrintConfig.cpp:2512
msgid "Max"
msgstr "最大值"


#: src/libslic3r/PrintConfig.cpp:2515
#, possible-c-format
msgid ""
"This is the highest printable layer height for this extruder, used to cap "
"the variable layer height and support layer height. Maximum recommended "
"layer height is 75% of the extrusion width to achieve reasonable inter-layer "
"adhesion. If set to 0, layer height is limited to 75% of the nozzle diameter."
msgstr ""
"這是此擠出機的最高可列印層高度, 用於封頂可變圖層高度和支撐層高度。建議的最大"
"層高度爲擠出寬度的 75%, 以實現合理的層間粘附。如果設置爲 0, 圖層高度將限制爲"
"噴嘴直徑的75%。"


#: src/libslic3r/PrintConfig.cpp:2525
msgid "Max print speed"
msgstr "最大列印速度"


#: src/libslic3r/PrintConfig.cpp:2527
msgid ""
"When setting other speed settings to 0 Slic3r will autocalculate the optimal "
"speed in order to keep constant extruder pressure. This experimental setting "
"is used to set the highest print speed you want to allow."
msgstr ""
"當將其他速度參數設爲0時，Slic3r會自動計算最優速度以保證擠出頭壓力穩定。該試驗"
"參數用於設置所允許的最大列印速度。"


#: src/libslic3r/PrintConfig.cpp:2548
msgid ""
"This experimental setting is used to set the maximum volumetric speed your "
"extruder supports."
msgstr "該實驗參數用於設置你的擠出頭所支持的最大體積速度。"


#: src/libslic3r/PrintConfig.cpp:2557
msgid "Max volumetric slope positive"
msgstr "最大流量增加率"


#: src/libslic3r/PrintConfig.cpp:2558 src/libslic3r/PrintConfig.cpp:2570
msgid ""
"This experimental setting is used to limit the speed of change in extrusion "
"rate. A value of 1.8 mm³/s² ensures, that a change from the extrusion rate "
"of 1.8 mm³/s (0.45mm extrusion width, 0.2mm extrusion height, feedrate 20 mm/"
"s) to 5.4 mm³/s (feedrate 60 mm/s) will take at least 2 seconds."
msgstr ""
"該實驗設置用於限制擠出速率的變化速度。1.8 mm/sm²的值確保從1.8 毫米/(0.45 mm "
"擠出寬度, 0.2 mm 擠出高度, 進給率 20 m) 到 5.4 mm/(進給率 60 m) 的擠出速率變"
"化至少需要2秒。"


#: src/libslic3r/PrintConfig.cpp:2562 src/libslic3r/PrintConfig.cpp:2574
msgid "mm³/s²"
msgstr "mm³/s²"


#: src/libslic3r/PrintConfig.cpp:2569
msgid "Max volumetric slope negative"
msgstr "最大流量減少率"


#: src/libslic3r/PrintConfig.cpp:2601
msgid "Min"
msgstr "最小值"


#: src/libslic3r/PrintConfig.cpp:2604
msgid ""
"This is the lowest printable layer height for this extruder and limits the "
"resolution for variable layer height. Typical values are between 0.05 mm and "
"0.1 mm."
msgstr ""
"這是此擠出機的最低可列印層高度, 並限制可變圖層高度的分辨率。典型值介於 0.05 "
"mm 和 0.1 mm 之間。"


#: src/libslic3r/PrintConfig.cpp:2634
msgid "Min print speed"
msgstr "最小列印速度"


#: src/libslic3r/PrintConfig.cpp:2643
msgid "Minimal filament extrusion length"
msgstr "最小耗材絲擠出長度"


#: src/libslic3r/PrintConfig.cpp:2645
msgid ""
"Generate no less than the number of skirt loops required to consume the "
"specified amount of filament on the bottom layer. For multi-extruder "
"machines, this minimum applies to each extruder."
msgstr ""
"在底層上消耗指定材料量生成環邊。對於多擠出頭的機器，該最小值適用於每個擠出"
"頭。"


#: src/libslic3r/PrintConfig.cpp:2654
msgid "Configuration notes"
msgstr "配置備註"


#: src/libslic3r/PrintConfig.cpp:2656
msgid ""
"You can put here your personal notes. This text will be added to the G-code "
"header comments."
msgstr ""
"你可以在這裏輸入你的個人備註。該段文字內容將被添加到G代碼文件開頭的註釋裏。"


#: src/libslic3r/PrintConfig.cpp:2667
msgid ""
"This is the diameter of your extruder nozzle (for example: 0.5, 0.35 etc.)"
msgstr "這是你的擠出頭噴嘴的直徑(比如：0.5,0.35等。)"


#: src/libslic3r/PrintConfig.cpp:2673
msgid "Host Type"
msgstr "主機類型"


#: src/libslic3r/PrintConfig.cpp:2675
msgid ""
"Slic3r can upload G-code files to a printer host. This field must contain "
"the kind of the host."
msgstr "Slic3r 可以將 G-code 文件上載到印表機主機。此字段必須包含主機的類型。"


#: src/libslic3r/PrintConfig.cpp:2709
msgid ""
"Slic3r can upload G-code files to a printer host. This field should contain "
"the hostname, IP address or URL of the printer host instance."
msgstr ""
"Slic3r 可以將 G-code 文件上載到印表機主機。此字段應包含印表機主機實例的主機"
"名, IP 地址或 URL。"


#: src/libslic3r/PrintConfig.cpp:2715
msgid "Only retract when crossing perimeters"
msgstr "僅在越過輪廓時回縮"


#: src/libslic3r/PrintConfig.cpp:2717
msgid ""
"Disables retraction when the travel path does not exceed the upper layer's "
"perimeters (and thus any ooze will be probably invisible)."
msgstr "當空程不超過上層輪廓時禁用回撤（這樣滴垂現象可能會看不見）。"


#: src/libslic3r/PrintConfig.cpp:2723 src/libslic3r/PrintConfig.cpp:4081
msgid "Enable"
msgstr "使能"


#: src/libslic3r/PrintConfig.cpp:2725
msgid ""
"This option will drop the temperature of the inactive extruders to prevent "
"oozing. It will enable a tall skirt automatically and move extruders outside "
"such skirt when changing temperatures."
msgstr ""
"此選項將降低不活動擠出機的溫度, 以防止滲出。它將自動啓用一條高大的裙邊, 並在"
"溫度變化時將擠出機移到這種裙邊之外。"


#: src/libslic3r/PrintConfig.cpp:2732
msgid "Output filename format"
msgstr "輸出文件名稱格式"


#: src/libslic3r/PrintConfig.cpp:2734
msgid ""
"You can use all configuration options as variables inside this template. For "
"example: [layer_height], [fill_density] etc. You can also use [timestamp], "
"[year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]."
msgstr ""
"可以使用所有的配置選項。如： [layer_height], [fill_density] 等。你也可以使用 "
"[timestamp], [year], [month], [day], [hour], [minute], [second], [version], "
"[input_filename], [input_filename_base]。"


#: src/libslic3r/PrintConfig.cpp:2821
msgid "Filament parking position"
msgstr "耗材絲停車位"


#: src/libslic3r/PrintConfig.cpp:2822
msgid ""
"Distance of the extruder tip from the position where the filament is parked "
"when unloaded. This should match the value in printer firmware. "
msgstr "擠出機與卸載時耗材絲停放位置的距離。這應該與印表機固件中的值相匹配. "


#: src/libslic3r/PrintConfig.cpp:2830
msgid "Extra loading distance"
msgstr "額外的裝載長度"


#: src/libslic3r/PrintConfig.cpp:2831
msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading. "
msgstr ""
"當設置爲零時, 燈絲在裝載過程中從停車位置移動的距離與卸載時移回的距離完全相"
"同。當正值時, 它將進一步加載, 如果爲負數, 則加載移動比卸載短. "


#: src/libslic3r/PrintConfig.cpp:2839 src/libslic3r/PrintConfig.cpp:2859
#: src/libslic3r/PrintConfig.cpp:2875 src/libslic3r/PrintConfig.cpp:2900
msgid "Perimeters"
msgstr "輪廓"


#: src/libslic3r/PrintConfig.cpp:2850
msgid "Perimeter extruder"
msgstr "輪廓擠出頭"


#: src/libslic3r/PrintConfig.cpp:2852
msgid ""
"The extruder to use when printing perimeters and brim. First extruder is 1."
msgstr "列印輪廓和裙邊所使用的擠出頭。第一個擠出頭是1。"


#: src/libslic3r/PrintConfig.cpp:2892
msgid ""
"Speed for perimeters (contours, aka vertical shells). Set to zero for auto."
msgstr "邊界的速度 (等高線, 也稱爲垂直殼)。自動設置爲零。"


#: src/libslic3r/PrintConfig.cpp:2903
msgid ""
"This option sets the number of perimeters to generate for each layer. Note "
"that Slic3r may increase this number automatically when it detects sloping "
"surfaces which benefit from a higher number of perimeters if the Extra "
"Perimeters option is enabled."
msgstr ""
"該選項設置每一層生成的輪廓個數。注意，如果”額外輪廓“選項被啓動，Slic3r在偵測"
"到斜坡表面時可能會自動增加該數值，因爲較多的輪廓有利於斜坡表面的列印。"


#: src/libslic3r/PrintConfig.cpp:2907
msgid "(minimum)."
msgstr "（最小）."


#: src/libslic3r/PrintConfig.cpp:2914
msgid "Post-processing scripts"
msgstr "後處理腳本"


#: src/libslic3r/PrintConfig.cpp:2916
msgid ""
"If you want to process the output G-code through custom scripts, just list "
"their absolute paths here. Separate multiple scripts with a semicolon. "
"Scripts will be passed the absolute path to the G-code file as the first "
"argument, and they can access the Slic3r config settings by reading "
"environment variables."
msgstr ""
"如果要通過自定義腳本處理輸出 G-code , 只需在此處列出它們的絕對路徑即可。用分"
"號分隔多個腳本。腳本將作爲第一個參數傳遞到 G-code 文件的絕對路徑, 並且它們可"
"以通過讀取環境變量訪問 Slic3r 配置設置。"


#: src/libslic3r/PrintConfig.cpp:2928
msgid "Printer type"
msgstr "印表機類型"


#: src/libslic3r/PrintConfig.cpp:2929
msgid "Type of the printer."
msgstr "印表機的類型."


#: src/libslic3r/PrintConfig.cpp:2934
msgid "Printer notes"
msgstr "印表機備註"


#: src/libslic3r/PrintConfig.cpp:2936
msgid "You can put your notes regarding the printer here."
msgstr "您可以在此處放置有關印表機的備註."


#: src/libslic3r/PrintConfig.cpp:2944
msgid "Printer vendor"
msgstr "印表機供應商"


#: src/libslic3r/PrintConfig.cpp:2945
msgid "Name of the printer vendor."
msgstr "印表機供應商的名稱."


#: src/libslic3r/PrintConfig.cpp:2950
msgid "Printer variant"
msgstr "印表機版本"


#: src/libslic3r/PrintConfig.cpp:2951
msgid ""
"Name of the printer variant. For example, the printer variants may be "
"differentiated by a nozzle diameter."
msgstr "印表機變體的版本。例如, 印表機版本可以通過噴嘴直徑進行區分。"


#: src/libslic3r/PrintConfig.cpp:2975
msgid "Raft layers"
msgstr "筏板層"


#: src/libslic3r/PrintConfig.cpp:2977
msgid ""
"The object will be raised by this number of layers, and support material "
"will be generated under it."
msgstr "物體將被該數目的層數擡起，而支撐材料將在其下方生成。"


#: src/libslic3r/PrintConfig.cpp:2985
msgid "Resolution"
msgstr "分辨率"


#: src/libslic3r/PrintConfig.cpp:2999
msgid "Minimum travel after retraction"
msgstr "回縮後最小空程"


#: src/libslic3r/PrintConfig.cpp:3001
msgid ""
"Retraction is not triggered when travel moves are shorter than this length."
msgstr "當空程短於此長度時不會觸發回縮。"


#: src/libslic3r/PrintConfig.cpp:3008
msgid "Retract amount before wipe"
msgstr "擦拭前的回縮量"


#: src/libslic3r/PrintConfig.cpp:3010
msgid ""
"With bowden extruders, it may be wise to do some amount of quick retract "
"before doing the wipe movement."
msgstr "對於遠程擠出機, 在做擦拭動作之前, 做一些快速的收回可能是明智的。"


#: src/libslic3r/PrintConfig.cpp:3017
msgid "Retract on layer change"
msgstr "層變化時回縮"


#: src/libslic3r/PrintConfig.cpp:3024 src/libslic3r/PrintConfig.cpp:3041
msgid "Length"
msgstr "長度"


#: src/libslic3r/PrintConfig.cpp:3025
msgid "Retraction Length"
msgstr "回縮長度"


#: src/libslic3r/PrintConfig.cpp:3027
msgid ""
"When retraction is triggered, filament is pulled back by the specified "
"amount (the length is measured on raw filament, before it enters the "
"extruder)."
msgstr ""
"當觸發回縮時，絲料以指定值往回收縮（長度以在進入擠出頭之前的原始材料爲基礎進"
"行計算）。"


#: src/libslic3r/PrintConfig.cpp:3029 src/libslic3r/PrintConfig.cpp:3046
msgid "mm (zero to disable)"
msgstr "mm (0禁用)"


#: src/libslic3r/PrintConfig.cpp:3034
msgid "Retraction length"
msgstr "回縮長度"


#: src/libslic3r/PrintConfig.cpp:3042
msgid "Retraction Length (Toolchange)"
msgstr "回縮長度 (工具更換)"


#: src/libslic3r/PrintConfig.cpp:3043
msgid ""
"When retraction is triggered before changing tool, filament is pulled back "
"by the specified amount (the length is measured on raw filament, before it "
"enters the extruder)."
msgstr ""
"當在改變工具前觸發回縮時，絲料以指定值回縮（長度以進入擠出頭前的原始材料爲基"
"礎測量）。"


#: src/libslic3r/PrintConfig.cpp:3052
msgid "Lift Z"
msgstr "擡高Z"


#: src/libslic3r/PrintConfig.cpp:3054
msgid ""
"If you set this to a positive value, Z is quickly raised every time a "
"retraction is triggered. When using multiple extruders, only the setting for "
"the first extruder will be considered."
msgstr ""
"如果設爲正值，每當回縮觸發時Z軸會快速擡升。當使用多個擠出頭時，僅會考慮第一個"
"擠出頭的該參數。"


#: src/libslic3r/PrintConfig.cpp:3061
msgid "Above Z"
msgstr "在Z上方"


#: src/libslic3r/PrintConfig.cpp:3062
msgid "Only lift Z above"
msgstr "僅提升 Z 高於"


#: src/libslic3r/PrintConfig.cpp:3064
msgid ""
"If you set this to a positive value, Z lift will only take place above the "
"specified absolute Z. You can tune this setting for skipping lift on the "
"first layers."
msgstr ""
"如果設爲正值，僅在指定的絕對Z值上方纔會擡高Z。可以調整該參數，用於跳過在前幾"
"層時跳過Z擡高的步驟。"


#: src/libslic3r/PrintConfig.cpp:3071
msgid "Below Z"
msgstr "Z下方"


#: src/libslic3r/PrintConfig.cpp:3072
msgid "Only lift Z below"
msgstr "僅提升 Z 低於"


#: src/libslic3r/PrintConfig.cpp:3074
msgid ""
"If you set this to a positive value, Z lift will only take place below the "
"specified absolute Z. You can tune this setting for limiting lift to the "
"first layers."
msgstr ""
"如果設爲正值，僅在指定的絕對Z值選房可以調整該參數，用於將擡高Z的動作限制在前"
"幾層時。"


#: src/libslic3r/PrintConfig.cpp:3104 src/libslic3r/PrintConfig.cpp:3112
msgid "Extra length on restart"
msgstr "重啓時額外長度"


#: src/libslic3r/PrintConfig.cpp:3105
msgid ""
"When the retraction is compensated after the travel move, the extruder will "
"push this additional amount of filament. This setting is rarely needed."
msgstr ""
"當在空程後回縮被補償時，擠出頭會基礎額外的指定量絲料。該參數一般不需設置。"


#: src/libslic3r/PrintConfig.cpp:3114
msgid ""
"When the retraction is compensated after changing tool, the extruder will "
"push this additional amount of filament."
msgstr "當在切換工具後回縮被補償時，擠出頭會基礎額外的指定量絲料。"


#: src/libslic3r/PrintConfig.cpp:3121 src/libslic3r/PrintConfig.cpp:3122
msgid "Retraction Speed"
msgstr "回抽速度"


#: src/libslic3r/PrintConfig.cpp:3124
msgid "The speed for retractions (it only applies to the extruder motor)."
msgstr "回縮速度 (僅適用於擠出機電機)."


#: src/libslic3r/PrintConfig.cpp:3130 src/libslic3r/PrintConfig.cpp:3131
msgid "Deretraction Speed"
msgstr "減速速度"


#: src/libslic3r/PrintConfig.cpp:3133
msgid ""
"The speed for loading of a filament into extruder after retraction (it only "
"applies to the extruder motor). If left to zero, the retraction speed is "
"used."
msgstr ""
"收回後將耗材絲裝入擠出機的速度 (僅適用於擠出機電機)。如果保持爲零, 則使用回縮"
"速度。"


#: src/libslic3r/PrintConfig.cpp:3150
msgid "Random"
msgstr "隨機"


#: src/libslic3r/PrintConfig.cpp:3151
msgid "Aligned"
msgstr "對齊"


#: src/libslic3r/PrintConfig.cpp:3179
msgid "Direction"
msgstr "方向"


#: src/libslic3r/PrintConfig.cpp:3181
msgid "Preferred direction of the seam"
msgstr "接縫的首選方向"


#: src/libslic3r/PrintConfig.cpp:3182
msgid "Seam preferred direction"
msgstr "接縫首選方向"


#: src/libslic3r/PrintConfig.cpp:3190
msgid "Jitter"
msgstr "Jitter"


#: src/libslic3r/PrintConfig.cpp:3192
msgid "Seam preferred direction jitter"
msgstr "接縫首選方向抖動"


#: src/libslic3r/PrintConfig.cpp:3193
msgid "Preferred direction of the seam - jitter"
msgstr "接縫抖動的首選方向"


#: src/libslic3r/PrintConfig.cpp:3201
msgid "Distance from object"
msgstr "離物體的距離"


#: src/libslic3r/PrintConfig.cpp:3203
msgid ""
"Distance between skirt and object(s). Set this to zero to attach the skirt "
"to the object(s) and get a brim for better adhesion."
msgstr "環邊與物體間的距離。設爲0，則使環邊緊貼物體，可獲得裙邊利於粘附。"


#: src/libslic3r/PrintConfig.cpp:3211
msgid "Skirt height"
msgstr "環邊高度"


#: src/libslic3r/PrintConfig.cpp:3213
msgid ""
"Height of skirt expressed in layers. Set this to a tall value to use skirt "
"as a shield against drafts."
msgstr "圖層中表示的環邊高度。設爲一個較高值，可將環邊用作。"


#: src/libslic3r/PrintConfig.cpp:3238
msgid "Loops (minimum)"
msgstr "圈數(最小)"


#: src/libslic3r/PrintConfig.cpp:3239
msgid "Skirt Loops"
msgstr "裙邊圈數"


#: src/libslic3r/PrintConfig.cpp:3241
msgid ""
"Number of loops for the skirt. If the Minimum Extrusion Length option is "
"set, the number of loops might be greater than the one configured here. Set "
"this to zero to disable skirt completely."
msgstr ""
"環邊的圈數。如果設置了最小擠出長度，那麼圈數必須比這裏設置的值要大。設爲0則完"
"全禁用環邊。"


#: src/libslic3r/PrintConfig.cpp:3249
msgid "Slow down if layer print time is below"
msgstr "如果圖層列印時間低於該值則減速"


#: src/libslic3r/PrintConfig.cpp:3264
msgid ""
"This separate setting will affect the speed of perimeters having radius <= "
"6.5mm (usually holes). If expressed as percentage (for example: 80%) it will "
"be calculated on the perimeters speed setting above. Set to zero for auto."
msgstr ""
"此單獨設置將影響半徑爲 < = 6.5 mm (通常爲孔) 的邊界的速度。如果以百分比表示 "
"(例如: 80%), 則將根據上面的邊界速度設置進行計算。自動設置爲零。"


#: src/libslic3r/PrintConfig.cpp:3355
msgid "Solid infill threshold area"
msgstr "可靠填充閾值區域"


#: src/libslic3r/PrintConfig.cpp:3357
msgid ""
"Force solid infill for regions having a smaller area than the specified "
"threshold."
msgstr "對於比指定閾值小的區域強制進行可靠填充。"


#: src/libslic3r/PrintConfig.cpp:3358 src/libslic3r/PrintConfig.cpp:4267
#: src/libslic3r/PrintConfig.cpp:4289
msgid "mm²"
msgstr "mm²"


#: src/libslic3r/PrintConfig.cpp:3364
msgid "Solid infill extruder"
msgstr "可靠填充擠出頭"


#: src/libslic3r/PrintConfig.cpp:3366
msgid "The extruder to use when printing solid infill."
msgstr "當列印可靠填充時使用的擠出頭。"


#: src/libslic3r/PrintConfig.cpp:3372
msgid "Solid infill every"
msgstr "每幾層可靠填充"


#: src/libslic3r/PrintConfig.cpp:3374
msgid ""
"This feature allows to force a solid layer every given number of layers. "
"Zero to disable. You can set this to any value (for example 9999); Slic3r "
"will automatically choose the maximum possible number of layers to combine "
"according to nozzle diameter and layer height."
msgstr ""
"該功能使得每指定數目層強制進行一次可靠填充。設爲0禁用該功能。可以設爲任意值"
"（如9999）；Slic3r會根據噴嘴直徑和層高來自動選擇圖層的最大可能個數。"


#: src/libslic3r/PrintConfig.cpp:3427
msgid "Solid layers"
msgstr "可靠層數"


#: src/libslic3r/PrintConfig.cpp:3429
msgid "Number of solid layers to generate on top and bottom surfaces."
msgstr "在頂部和底部表面生成的可靠層數。"


#: src/libslic3r/PrintConfig.cpp:3442
msgid "Spiral vase"
msgstr "螺旋式容器"


#: src/libslic3r/PrintConfig.cpp:3452
msgid "Temperature variation"
msgstr "溫度變化"


#: src/libslic3r/PrintConfig.cpp:3453
msgid ""
"Temperature difference to be applied when an extruder is not active. Enables "
"a full-height \"sacrificial\" skirt on which the nozzles are periodically "
"wiped."
msgstr ""
"當擠出機處於非活動狀態時, 要應用溫差。啓用全高的 \"犧牲\" 裙邊, 定期擦拭噴"
"嘴。"


#: src/libslic3r/PrintConfig.cpp:3462 src/libslic3r/PrintConfig.cpp:3487
msgid "Start G-code"
msgstr "起始G代碼"


#: src/libslic3r/PrintConfig.cpp:3536
msgid "Custom G-code"
msgstr "自定義 G-code"


#: src/libslic3r/PrintConfig.cpp:3545
msgid "Single Extruder Multi Material"
msgstr "單擠出機多材料"


#: src/libslic3r/PrintConfig.cpp:3547
msgid "The printer multiplexes filaments into a single hot end."
msgstr "印表機將耗材絲多路複用到一個熱端。"


#: src/libslic3r/PrintConfig.cpp:3552
msgid "Prime all printing extruders"
msgstr "裝填所有印刷擠出機"


#: src/libslic3r/PrintConfig.cpp:3554
msgid ""
"If enabled, all printing extruders will be primed at the front edge of the "
"print bed at the start of the print."
msgstr "如果啓用, 所有列印擠出機都將在列印開始時在列印牀的前緣進行裝填。"


#: src/libslic3r/PrintConfig.cpp:3568
msgid "Generate support material"
msgstr "生成支撐材料"


#: src/libslic3r/PrintConfig.cpp:3570
msgid "Enable support material generation."
msgstr "啓用支撐材料生成功能。"


#: src/libslic3r/PrintConfig.cpp:3574
msgid "Auto generated supports"
msgstr "自動生成支撐"


#: src/libslic3r/PrintConfig.cpp:3576
msgid ""
"If checked, supports will be generated automatically based on the overhang "
"threshold value. If unchecked, supports will be generated inside the "
"\"Support Enforcer\" volumes only."
msgstr ""
"如果選中, 將根據懸垂閾值自動生成支持。如果未選中, 則僅在 \"支撐執行器\" 空間"
"內生成支持。"


#: src/libslic3r/PrintConfig.cpp:3582
msgid "XY separation between an object and its support"
msgstr "對象與其支撐之間的 XY 分離距離"


#: src/libslic3r/PrintConfig.cpp:3584
msgid ""
"XY separation between an object and its support. If expressed as percentage "
"(for example 50%), it will be calculated over external perimeter width."
msgstr ""
"對象與其支撐之間的 xy 分離距離。如果表示爲百分比 (例如 50%), 則將根據外部外圍"
"寬度計算。"


#: src/libslic3r/PrintConfig.cpp:3594
msgid "Pattern angle"
msgstr "樣式角度"


#: src/libslic3r/PrintConfig.cpp:3597
msgid ""
"Use this setting to rotate the support material pattern on the horizontal "
"plane."
msgstr "使用該參數對支撐材料的樣子在水平面上進行旋轉。"


#: src/libslic3r/PrintConfig.cpp:3607 src/libslic3r/PrintConfig.cpp:4868
msgid ""
"Only create support if it lies on a build plate. Don't create support on a "
"print."
msgstr "僅在熱牀上生成支撐，不在列印出來的物體上生成。"


#: src/libslic3r/PrintConfig.cpp:3657
msgid "Enforce support for the first"
msgstr "前幾層增強支撐"


#: src/libslic3r/PrintConfig.cpp:3659
msgid ""
"Generate support material for the specified number of layers counting from "
"bottom, regardless of whether normal support material is enabled or not and "
"regardless of any angle threshold. This is useful for getting more adhesion "
"of objects having a very thin or poor footprint on the build plate."
msgstr ""
"從底部開始，對指定數目的圖層生成支撐材料，無論正常的支撐材料是否啓用，也不管"
"任何角度閾值。適用於在熱牀上腳太細、站不住的物件，便於更好的粘附。"


#: src/libslic3r/PrintConfig.cpp:3664
msgid "Enforce support for the first n layers"
msgstr "強制支撐前 n 層"


#: src/libslic3r/PrintConfig.cpp:3670
msgid "Support material/raft/skirt extruder"
msgstr "支撐材料/筏/環邊擠出頭"


#: src/libslic3r/PrintConfig.cpp:3672
msgid ""
"The extruder to use when printing support material, raft and skirt (1+, 0 to "
"use the current extruder to minimize tool changes)."
msgstr ""
"列印支撐材料、基座和裙邊時使用的擠出機 (1+, 0 用於使用當前擠出機以最大限度地"
"減少工具切換)."


#: src/libslic3r/PrintConfig.cpp:3693
msgid "Interface loops"
msgstr "接觸面圈數"


#: src/libslic3r/PrintConfig.cpp:3695
msgid ""
"Cover the top contact layer of the supports with loops. Disabled by default."
msgstr "用循環覆蓋支撐物的頂部接觸層。默認情況下禁用。"


#: src/libslic3r/PrintConfig.cpp:3700
msgid "Support material/raft interface extruder"
msgstr "支撐材料/筏表面擠出頭"


#: src/libslic3r/PrintConfig.cpp:3702
msgid ""
"The extruder to use when printing support material interface (1+, 0 to use "
"the current extruder to minimize tool changes). This affects raft too."
msgstr ""
"列印支撐材料界面時要使用的擠出機 (1+, 0 用於使用當前擠出機以最大限度地減少工"
"具切換)。這也會影響基座."


#: src/libslic3r/PrintConfig.cpp:3709
msgid "Interface layers"
msgstr "表面層數"


#: src/libslic3r/PrintConfig.cpp:3711
msgid ""
"Number of interface layers to insert between the object(s) and support "
"material."
msgstr "在物體和支撐材料中間插入的表面層數。"


#: src/libslic3r/PrintConfig.cpp:3718
msgid "Interface pattern spacing"
msgstr "表面樣式間隔"


#: src/libslic3r/PrintConfig.cpp:3720
msgid "Spacing between interface lines. Set zero to get a solid interface."
msgstr "表面直線間的間隔。設爲0獲得可靠表面。"


#: src/libslic3r/PrintConfig.cpp:3730
msgid ""
"Speed for printing support material interface layers. If expressed as "
"percentage (for example 50%) it will be calculated over support material "
"speed."
msgstr ""
"列印支撐材料表面層的速度。若表示爲百分數（如50%），則以支撐材料速度爲基準計"
"算。"


#: src/libslic3r/PrintConfig.cpp:3742
msgid "Pattern used to generate support material."
msgstr "生成支撐材料的樣式。"


#: src/libslic3r/PrintConfig.cpp:3748
msgid "Rectilinear grid"
msgstr "直線網格"


#: src/libslic3r/PrintConfig.cpp:3777
msgid "Pattern spacing"
msgstr "樣式間隔"


#: src/libslic3r/PrintConfig.cpp:3779
msgid "Spacing between support material lines."
msgstr "支撐材料直線間的間隙。"


#: src/libslic3r/PrintConfig.cpp:3789
msgid "Speed for printing support material."
msgstr "列印支撐材料的速度。"


#: src/libslic3r/PrintConfig.cpp:3796
msgid "Synchronize with object layers"
msgstr "與對象圖層同步"


#: src/libslic3r/PrintConfig.cpp:3798
msgid ""
"Synchronize support layers with the object print layers. This is useful with "
"multi-material printers, where the extruder switch is expensive."
msgstr ""
"將支撐圖層與對象列印圖層同步。這對於多材料印表機非常有用, 因爲在這種印表機"
"中, 擠出機切換非常不划算."


#: src/libslic3r/PrintConfig.cpp:3804
msgid "Overhang threshold"
msgstr "懸空閾值"


#: src/libslic3r/PrintConfig.cpp:3806
msgid ""
"Support material will not be generated for overhangs whose slope angle (90° "
"= vertical) is above the given threshold. In other words, this value "
"represent the most horizontal slope (measured from the horizontal plane) "
"that you can print without support material. Set to zero for automatic "
"detection (recommended)."
msgstr ""
"對於坡度角度 (90° = 垂直) 高於給定閾值的懸空部分, 將不會生成支撐材料。換句話"
"說, 此值表示在沒有支撐材料的情況下可以列印的最水平坡度 (從水平面測量)。設置爲"
"零, 用於自動檢測 (推薦)。"


#: src/libslic3r/PrintConfig.cpp:3818
msgid "With sheath around the support"
msgstr "用護套圍繞支撐"


#: src/libslic3r/PrintConfig.cpp:3820
msgid ""
"Add a sheath (a single perimeter line) around the base support. This makes "
"the support more reliable, but also more difficult to remove."
msgstr ""
"在基礎支架周圍添加護套 (一條外圍線)。這使得支持更可靠, 但也更難以移除。"


#: src/libslic3r/PrintConfig.cpp:3891
msgid "Overlap"
msgstr "交疊"


#: src/libslic3r/PrintConfig.cpp:3920
msgid "Threads"
msgstr "線程"


#: src/libslic3r/PrintConfig.cpp:3921
msgid ""
"Threads are used to parallelize long-running tasks. Optimal threads number "
"is slightly above the number of available cores/processors."
msgstr "線程用於並行處理長時間任務。最優的線程數應比可用核/處理器的數目略多。"


#: src/libslic3r/PrintConfig.cpp:3941
msgid "Tool change G-code"
msgstr "切換工具G代碼"


#: src/libslic3r/PrintConfig.cpp:3992
msgid ""
"Speed for printing top solid layers (it only applies to the uppermost "
"external layers and not to their internal solid layers). You may want to "
"slow down this to get a nicer surface finish. This can be expressed as a "
"percentage (for example: 80%) over the solid infill speed above. Set to zero "
"for auto."
msgstr ""
"列印頂部實體圖層的速度 (它僅適用於最上面的外部圖層, 而不適用於其內部實體圖"
"層)。你可能想放慢速度, 以獲得更好的表面光潔度。這可以用百分比表示 (例如: 80%)"
"以上的固體填充速度。自動設置爲零。"


#: src/libslic3r/PrintConfig.cpp:4008
msgid "Number of solid layers to generate on top surfaces."
msgstr "在頂部表面上生成的可靠層數。"


#: src/libslic3r/PrintConfig.cpp:4009
msgid "Top solid layers"
msgstr "頂部實心層"


#: src/libslic3r/PrintConfig.cpp:4029
msgid "Speed for travel moves (jumps between distant extrusion points)."
msgstr "空程移動的速度（從一個擠出點結束調到另一個擠出點開始）。"


#: src/libslic3r/PrintConfig.cpp:4037
msgid "Use firmware retraction"
msgstr "使用固件回縮"


#: src/libslic3r/PrintConfig.cpp:4039
msgid ""
"This experimental setting uses G10 and G11 commands to have the firmware "
"handle the retraction. This is only supported in recent Marlin."
msgstr ""
"該試驗參數使用G10和G11指令來使固件處理回縮。僅在最新的Marlin中支持該功能。"


#: src/libslic3r/PrintConfig.cpp:4045
msgid "Use relative E distances"
msgstr "使用相對E距離"


#: src/libslic3r/PrintConfig.cpp:4047
msgid ""
"If your firmware requires relative E values, check this, otherwise leave it "
"unchecked. Most firmwares use absolute values."
msgstr "如果固件需要相對E值，勾選此項，否則不要勾選。大部分固件使用絕對值。"


#: src/libslic3r/PrintConfig.cpp:4053
msgid "Use volumetric E"
msgstr "使用體積E"


#: src/libslic3r/PrintConfig.cpp:4055
msgid ""
"This experimental setting uses outputs the E values in cubic millimeters "
"instead of linear millimeters. If your firmware doesn't already know "
"filament diameter(s), you can put commands like 'M200 D[filament_diameter_0] "
"T0' in your start G-code in order to turn volumetric mode on and use the "
"filament diameter associated to the filament selected in Slic3r. This is "
"only supported in recent Marlin."
msgstr ""
"該試驗參數在E值中使用立方米爲單位，而非毫米。如果固件不知道絲料直徑，你可以在"
"起始G代碼中輸入如'M200 D[filament_diameter_0] T0' 以開啓體積模式，並使用在"
"Slic3r中已選的絲料直徑。僅在最新Marlin中支持該功能。"


#: src/libslic3r/PrintConfig.cpp:4065
msgid "Enable variable layer height feature"
msgstr "啓用可變圖層高度功能"


#: src/libslic3r/PrintConfig.cpp:4067
msgid ""
"Some printers or printer setups may have difficulties printing with a "
"variable layer height. Enabled by default."
msgstr ""
"某些印表機或印表機設置可能難以使用可變圖層高度進行列印。默認情況下啓用。"


#: src/libslic3r/PrintConfig.cpp:4073
msgid "Wipe while retracting"
msgstr "回縮時擦拭"


#: src/libslic3r/PrintConfig.cpp:4075
msgid ""
"This flag will move the nozzle while retracting to minimize the possible "
"blob on leaky extruders."
msgstr "在回縮時移動噴嘴以避免擠出頭滴漏。"


#: src/libslic3r/PrintConfig.cpp:4084
msgid ""
"Multi material printers may need to prime or purge extruders on tool "
"changes. Extrude the excess material into the wipe tower."
msgstr ""
"多材料印表機可能需要對工具更換進行填充清洗或清除擠出機。將多餘的材料擠出到擦"
"料塔中."


#: src/libslic3r/PrintConfig.cpp:4090
msgid "Purging volumes - load/unload volumes"
msgstr "清除量-加載/卸載卷"


#: src/libslic3r/PrintConfig.cpp:4091
msgid ""
"This vector saves required volumes to change from/to each tool used on the "
"wipe tower. These values are used to simplify creation of the full purging "
"volumes below. "
msgstr ""
"此矢量保存每個工具更改擠出到擦料塔所需的量。這些值用於簡化下面的完整清除量的"
"創建。 "


#: src/libslic3r/PrintConfig.cpp:4097
msgid "Purging volumes - matrix"
msgstr "清除量-矩陣"


#: src/libslic3r/PrintConfig.cpp:4098
msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools. "
msgstr ""
"此矩陣描述了爲任何給定的一對工具清除擦料塔上的新耗材絲所需的量 (以立方毫秒爲"
"單位). "


#: src/libslic3r/PrintConfig.cpp:4164
msgid "X coordinate of the left front corner of a wipe tower"
msgstr "擦料塔左前角的 X 座標"


#: src/libslic3r/PrintConfig.cpp:4172
msgid "Y coordinate of the left front corner of a wipe tower"
msgstr "擦拭塔左前角的 Y 座標"


#: src/libslic3r/PrintConfig.cpp:4180
msgid "Width of a wipe tower"
msgstr "擦料塔的寬度"


#: src/libslic3r/PrintConfig.cpp:4186
msgid "Wipe tower rotation angle"
msgstr "擦料塔旋轉角度"


#: src/libslic3r/PrintConfig.cpp:4187
msgid "Wipe tower rotation angle with respect to x-axis."
msgstr "擦料塔相對於 x 軸的旋轉角度."


#: src/libslic3r/PrintConfig.cpp:4194
msgid "Wipe into this object's infill"
msgstr "擦入此物體的填充"


#: src/libslic3r/PrintConfig.cpp:4195
msgid ""
"Purging after toolchange will done inside this object's infills. This lowers "
"the amount of waste but may result in longer print time  due to additional "
"travel moves."
msgstr ""
"工具更改後的熱頭清除將在此對象的填充內完成。這降低了浪費量, 但可能會導致更長"
"的列印時間, 由於額外的移動。"


#: src/libslic3r/PrintConfig.cpp:4202
msgid "Wipe into this object"
msgstr "擦入此物體的填充"


#: src/libslic3r/PrintConfig.cpp:4203
msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"對象將用於在工具更改後清除噴嘴, 以節省在擦除塔中浪費的材料並減少列印時間。因"
"此, 對象的顏色將混合在一起。"


#: src/libslic3r/PrintConfig.cpp:4219
msgid "Maximal bridging distance"
msgstr "最大橋接距離"


#: src/libslic3r/PrintConfig.cpp:4220
msgid "Maximal distance between supports on sparse infill sections. "
msgstr "稀疏填充部分上的支撐之間的最大距離. "


#: src/libslic3r/PrintConfig.cpp:4294
msgid "Z offset"
msgstr "Z補償"


#: src/libslic3r/PrintConfig.cpp:4296
msgid ""
"This value will be added (or subtracted) from all the Z coordinates in the "
"output G-code. It is used to compensate for bad Z endstop position: for "
"example, if your endstop zero actually leaves the nozzle 0.3mm far from the "
"print bed, set this to -0.3 (or fix your endstop)."
msgstr ""
"在輸出G代碼中，所有Z座標將在原基礎上增大（或減少）該數值。用來對糟糕的Z終點擋"
"板位置進行補償，如果你的終點擋板爲零時，噴嘴離列印熱牀還有0.3毫米，將該值設"
"爲-0.3（或者調整你的終點擋板）。"


#: src/libslic3r/PrintConfig.cpp:4524
msgid "Display width"
msgstr "顯示寬度"


#: src/libslic3r/PrintConfig.cpp:4525
msgid "Width of the display"
msgstr "顯示寬度"


#: src/libslic3r/PrintConfig.cpp:4530
msgid "Display height"
msgstr "顯示高度"


#: src/libslic3r/PrintConfig.cpp:4531
msgid "Height of the display"
msgstr "顯示高度"


#: src/libslic3r/PrintConfig.cpp:4536
msgid "Number of pixels in"
msgstr "像素點的數量"


#: src/libslic3r/PrintConfig.cpp:4538
msgid "Number of pixels in X"
msgstr "X 中的像素數"


#: src/libslic3r/PrintConfig.cpp:4544
msgid "Number of pixels in Y"
msgstr "Y 中的像素數"


#: src/libslic3r/PrintConfig.cpp:4563
msgid "Display orientation"
msgstr "顯示方向"


#: src/libslic3r/PrintConfig.cpp:4564
msgid ""
"Set the actual LCD display orientation inside the SLA printer. Portrait mode "
"will flip the meaning of display width and height parameters and the output "
"images will be rotated by 90 degrees."
msgstr ""
"在 SLA 印表機內設置實際的 LCD 顯示方向。人像模式將翻轉顯示寬度和高度參數的含"
"義, 輸出圖像將旋轉90度。"


#: src/libslic3r/PrintConfig.cpp:4570
msgid "Landscape"
msgstr "景觀"


#: src/libslic3r/PrintConfig.cpp:4571
msgid "Portrait"
msgstr "肖像"


#: src/libslic3r/PrintConfig.cpp:4576
msgid "Fast"
msgstr "快"


#: src/libslic3r/PrintConfig.cpp:4577
msgid "Fast tilt"
msgstr "快速傾斜"


#: src/libslic3r/PrintConfig.cpp:4578
msgid "Time of the fast tilt"
msgstr "快速傾斜的時間"


#: src/libslic3r/PrintConfig.cpp:4585
msgid "Slow"
msgstr "慢"


#: src/libslic3r/PrintConfig.cpp:4586
msgid "Slow tilt"
msgstr "緩慢傾斜"


#: src/libslic3r/PrintConfig.cpp:4587
msgid "Time of the slow tilt"
msgstr "緩慢傾斜的時間"


#: src/libslic3r/PrintConfig.cpp:4594
msgid "Area fill"
msgstr "區域填充"


#: src/libslic3r/PrintConfig.cpp:4595
msgid ""
"The percentage of the bed area. \n"
"If the print area exceeds the specified value, \n"
"then a slow tilt will be used, otherwise - a fast tilt"
msgstr ""
"牀面積的百分比。\n"
"如果列印區域超過指定的值,\n"
"然後一個緩慢的傾斜將被使用, 否則-一個快速傾斜"


#: src/libslic3r/PrintConfig.cpp:4602 src/libslic3r/PrintConfig.cpp:4603
#: src/libslic3r/PrintConfig.cpp:4604
msgid "Printer scaling correction"
msgstr "印表機縮放校正"


#: src/libslic3r/PrintConfig.cpp:4610 src/libslic3r/PrintConfig.cpp:4611
msgid "Printer absolute correction"
msgstr "印表機絕對校正"


#: src/libslic3r/PrintConfig.cpp:4612
msgid ""
"Will inflate or deflate the sliced 2D polygons according to the sign of the "
"correction."
msgstr "將根據校正的符號對切片的2D 多邊形進行放大或收縮。"


#: src/libslic3r/PrintConfig.cpp:4627 src/libslic3r/PrintConfig.cpp:4628
msgid "Printer gamma correction"
msgstr "印表機伽瑪校正"


#: src/libslic3r/PrintConfig.cpp:4653 src/libslic3r/PrintConfig.cpp:4654
msgid "Initial layer height"
msgstr "初始圖層高度"


#: src/libslic3r/PrintConfig.cpp:4688
msgid "Faded layers"
msgstr "淡入淡出的圖層"


#: src/libslic3r/PrintConfig.cpp:4689
msgid ""
"Number of the layers needed for the exposure time fade from initial exposure "
"time to the exposure time"
msgstr "曝光時間所需的層數從最初的曝光時間消失到曝光時間"


#: src/libslic3r/PrintConfig.cpp:4712 src/libslic3r/PrintConfig.cpp:4713
msgid "Exposure time"
msgstr "曝光時間"


#: src/libslic3r/PrintConfig.cpp:4735 src/libslic3r/PrintConfig.cpp:4736
msgid "Initial exposure time"
msgstr "初始曝光時間"


#: src/libslic3r/PrintConfig.cpp:4742 src/libslic3r/PrintConfig.cpp:4743
msgid "Correction for expansion"
msgstr "擴展的更正"


#: src/libslic3r/PrintConfig.cpp:4749
msgid "SLA print material notes"
msgstr "SLA 列印材料註釋"


#: src/libslic3r/PrintConfig.cpp:4750
msgid "You can put your notes regarding the SLA print material here."
msgstr "您可以在此處放置有關 sla 列印材料的註釋."


#: src/libslic3r/PrintConfig.cpp:4762 src/libslic3r/PrintConfig.cpp:4773
msgid "Default SLA material profile"
msgstr "默認 SLA 材料配置文件"


#: src/libslic3r/PrintConfig.cpp:4784
msgid "Generate supports"
msgstr "生成支撐"


#: src/libslic3r/PrintConfig.cpp:4786
msgid "Generate supports for the models"
msgstr "生成模型的支撐"


#: src/libslic3r/PrintConfig.cpp:4793
msgid "Diameter of the pointing side of the head"
msgstr "頭部指向側的直徑"


#: src/libslic3r/PrintConfig.cpp:4802
msgid "How much the pinhead has to penetrate the model surface"
msgstr "針頭穿透模型表面的程度"


#: src/libslic3r/PrintConfig.cpp:4811
msgid "Width from the back sphere center to the front sphere center"
msgstr "從後球體中心到前球體中心的寬度"


#: src/libslic3r/PrintConfig.cpp:4821
msgid "Diameter in mm of the support pillars"
msgstr "支撐柱直徑 (毫米)"


#: src/libslic3r/PrintConfig.cpp:4859
msgid "Zig-Zag"
msgstr "鋸齒形"


#: src/libslic3r/PrintConfig.cpp:4860
msgid "Cross"
msgstr "交叉"


#: src/libslic3r/PrintConfig.cpp:4861
msgid "Dynamic"
msgstr "動態"


#: src/libslic3r/PrintConfig.cpp:4873
msgid "Pillar widening factor"
msgstr "支柱加寬係數"


#: src/libslic3r/PrintConfig.cpp:4875
msgid ""
"Merging bridges or pillars into another pillars can increase the radius. "
"Zero means no increase, one means full increase."
msgstr ""
"將橋樑或柱子合併到另一個柱子中可以增加半徑。零意味着沒有增加,1意味着全增加。"


#: src/libslic3r/PrintConfig.cpp:4884
msgid "Support base diameter"
msgstr "支撐底座直徑"


#: src/libslic3r/PrintConfig.cpp:4886
msgid "Diameter in mm of the pillar base"
msgstr "柱底座直徑 (毫米)"


#: src/libslic3r/PrintConfig.cpp:4894
msgid "Support base height"
msgstr "支撐基座高度"


#: src/libslic3r/PrintConfig.cpp:4896
msgid "The height of the pillar base cone"
msgstr "柱基錐的高度"


#: src/libslic3r/PrintConfig.cpp:4916
msgid "Critical angle"
msgstr "臨界角度"


#: src/libslic3r/PrintConfig.cpp:4918
msgid "The default angle for connecting support sticks and junctions."
msgstr "連接支撐杆和連接點的默認角度。"


#: src/libslic3r/PrintConfig.cpp:4926
msgid "Max bridge length"
msgstr "最大橋長"


#: src/libslic3r/PrintConfig.cpp:4928
msgid "The max length of a bridge"
msgstr "橋的最大長度"


#: src/libslic3r/PrintConfig.cpp:4935
msgid "Max pillar linking distance"
msgstr "最大柱連接距離"


#: src/libslic3r/PrintConfig.cpp:4937
msgid ""
"The max distance of two pillars to get linked with each other. A zero value "
"will prohibit pillar cascading."
msgstr "兩個支柱的最大距離, 以相互連接。零值將禁止柱級聯。"


#: src/libslic3r/PrintConfig.cpp:4960
msgid "This is a relative measure of support points density."
msgstr "這是支持點密度的相對度量。"


#: src/libslic3r/PrintConfig.cpp:4966
msgid "Minimal distance of the support points"
msgstr "支撐點的最小距離"


#: src/libslic3r/PrintConfig.cpp:4968
msgid "No support points will be placed closer than this threshold."
msgstr "沒有任何支助點將被放置在比這一閾值更近的地方。"


#: src/libslic3r/PrintConfig.cpp:4974
msgid "Use pad"
msgstr "使用墊"


#: src/libslic3r/PrintConfig.cpp:4976
msgid "Add a pad underneath the supported model"
msgstr "在支撐模型下添加一個墊"


#: src/libslic3r/PrintConfig.cpp:4981
msgid "Pad wall thickness"
msgstr "墊壁厚度"


#: src/libslic3r/PrintConfig.cpp:4983
msgid "The thickness of the pad and its optional cavity walls."
msgstr "墊片的厚度及其可選的空腔壁。"


#: src/libslic3r/PrintConfig.cpp:4991
msgid "Pad wall height"
msgstr "墊壁高度"


#: src/libslic3r/PrintConfig.cpp:5016
msgid "Max merge distance"
msgstr "最大合併距離"


#: src/libslic3r/PrintConfig.cpp:5018
msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""
"有些物體可以與幾個較小的墊子在一起, 而不是一個大的墊子。此參數定義兩個較小墊"
"的中心應該有多遠。如果它們更接近, 它們將被合併成一個墊子。"


#: src/libslic3r/PrintConfig.cpp:5038
msgid "Pad wall slope"
msgstr "墊壁坡度"


#: src/libslic3r/PrintConfig.cpp:5040
msgid ""
"The slope of the pad wall relative to the bed plane. 90 degrees means "
"straight walls."
msgstr "墊壁相對於牀面的斜率。90度意味着直牆。"


#: src/libslic3r/PrintConfig.cpp:6222
msgid "Export the model(s) as OBJ."
msgstr "將模型導出爲 OBJ。"


#: src/libslic3r/PrintConfig.cpp:6234
msgid "Export SLA"
msgstr "導出 SLA"


#: src/libslic3r/PrintConfig.cpp:6235
msgid "Slice the model and export SLA printing layers as PNG."
msgstr "將模型切片, 並將 SLA 列印圖層導出爲 PNG。"


#: src/libslic3r/PrintConfig.cpp:6240
msgid "Export 3MF"
msgstr "導出 3MF"


#: src/libslic3r/PrintConfig.cpp:6241
msgid "Export the model(s) as 3MF."
msgstr "將模型導出爲3MF。"


#: src/libslic3r/PrintConfig.cpp:6245
msgid "Export AMF"
msgstr "導出 AMF"


#: src/libslic3r/PrintConfig.cpp:6246
msgid "Export the model(s) as AMF."
msgstr "將模型導出爲 AMF。"


#: src/libslic3r/PrintConfig.cpp:6250
msgid "Export STL"
msgstr "導出STL  Export STL"


#: src/libslic3r/PrintConfig.cpp:6251
msgid "Export the model(s) as STL."
msgstr "將模型導出爲 STL。"


#: src/libslic3r/PrintConfig.cpp:6256
msgid "Slice the model and export toolpaths as G-code."
msgstr "將模型切片並將刀具路徑導出爲 G 代碼。"


#: src/libslic3r/PrintConfig.cpp:6267
msgid "Slice"
msgstr "切片"


#: src/libslic3r/PrintConfig.cpp:6268
msgid ""
"Slice the model as FFF or SLA based on the printer_technology configuration "
"value."
msgstr "根據印表機技術配置值將模型切片爲 FFF 或 SLA。"


#: src/libslic3r/PrintConfig.cpp:6273
msgid "Help"
msgstr "幫助"


#: src/libslic3r/PrintConfig.cpp:6274
msgid "Show this help."
msgstr "顯示此幫助。"


#: src/libslic3r/PrintConfig.cpp:6279
msgid "Help (FFF options)"
msgstr "幫助 (FFF 選項)"


#: src/libslic3r/PrintConfig.cpp:6280
msgid "Show the full list of print/G-code configuration options."
msgstr "顯示列印代碼配置選項的完整列表。"


#: src/libslic3r/PrintConfig.cpp:6284
msgid "Help (SLA options)"
msgstr "幫助 (SLA 選項)"


#: src/libslic3r/PrintConfig.cpp:6285
msgid "Show the full list of SLA print configuration options."
msgstr "顯示 SLA 列印配置選項的完整列表。"


#: src/libslic3r/PrintConfig.cpp:6289
msgid "Output Model Info"
msgstr "輸出模型信息"


#: src/libslic3r/PrintConfig.cpp:6290
msgid "Write information about the model to the console."
msgstr "給控制檯寫入模型的信息。"


#: src/libslic3r/PrintConfig.cpp:6294
msgid "Save config file"
msgstr "保存配置文件"


#: src/libslic3r/PrintConfig.cpp:6295
msgid "Save configuration to the specified file."
msgstr "將配置參數保存到指定文件。"


#: src/libslic3r/PrintConfig.cpp:6305
msgid "Align XY"
msgstr "對齊 XY"


#: src/libslic3r/PrintConfig.cpp:6306
msgid "Align the model to the given point."
msgstr "將模型對齊到給定點。"


#: src/libslic3r/PrintConfig.cpp:6311
msgid "Cut model at the given Z."
msgstr "在給定Z處切割模型。"


#: src/libslic3r/PrintConfig.cpp:6335
msgid "Center"
msgstr "居中"


#: src/libslic3r/PrintConfig.cpp:6336
msgid "Center the print around the given center."
msgstr "將列印內容集中在給定的中心周圍。"


#: src/libslic3r/PrintConfig.cpp:6340
msgid "Don't arrange"
msgstr "不要排列布局"


#: src/libslic3r/PrintConfig.cpp:6341
msgid ""
"Do not rearrange the given models before merging and keep their original XY "
"coordinates."
msgstr "在合併之前, 不要重新排列給定的模型, 並保留其原始 XY 座標。"


#: src/libslic3r/PrintConfig.cpp:6344
msgid "Duplicate"
msgstr "複製"


#: src/libslic3r/PrintConfig.cpp:6345
msgid "Multiply copies by this factor."
msgstr "按此倍數增加副本。"


#: src/libslic3r/PrintConfig.cpp:6349
msgid "Duplicate by grid"
msgstr "按網格複製"


#: src/libslic3r/PrintConfig.cpp:6350
msgid "Multiply copies by creating a grid."
msgstr "通過創建網格將副本增加。"


#: src/libslic3r/PrintConfig.cpp:6354
msgid ""
"Arrange the supplied models in a plate and merge them in a single model in "
"order to perform actions once."
msgstr ""
"將提供的模型排列在一個平板中, 並將它們合併到一個模型中, 以便執行一次操作。"


#: src/libslic3r/PrintConfig.cpp:6359
msgid ""
"Try to repair any non-manifold meshes (this option is implicitly added "
"whenever we need to slice the model to perform the requested action)."
msgstr ""
"嘗試修復任何非流形網格 (每當我們需要對模型進行切片以執行請求的操作時, 都會隱"
"式添加此選項)。"


#: src/libslic3r/PrintConfig.cpp:6363
msgid "Rotation angle around the Z axis in degrees."
msgstr "圍繞 Z 軸的旋轉角度 (以度爲單位)。"


#: src/libslic3r/PrintConfig.cpp:6367
msgid "Rotate around X"
msgstr "繞X軸旋轉"


#: src/libslic3r/PrintConfig.cpp:6368
msgid "Rotation angle around the X axis in degrees."
msgstr "圍繞 X 軸的旋轉角度 (以度爲單位)。"


#: src/libslic3r/PrintConfig.cpp:6372
msgid "Rotate around Y"
msgstr "繞Y軸旋轉"


#: src/libslic3r/PrintConfig.cpp:6373
msgid "Rotation angle around the Y axis in degrees."
msgstr "圍繞 Y 軸的旋轉角度 (以度爲單位)。"


#: src/libslic3r/PrintConfig.cpp:6378
msgid "Scaling factor or percentage."
msgstr "縮放因子或百分比。"


#: src/libslic3r/PrintConfig.cpp:6383
msgid ""
"Detect unconnected parts in the given model(s) and split them into separate "
"objects."
msgstr "檢測給定模型中未連接的部件, 並將其拆分爲單獨的對象。"


#: src/libslic3r/PrintConfig.cpp:6386
msgid "Scale to Fit"
msgstr "縮放到合適大小"


#: src/libslic3r/PrintConfig.cpp:6387
msgid "Scale to fit the given volume."
msgstr "縮放到適合於給定體積。"


#: src/libslic3r/PrintConfig.cpp:6396
msgid "Ignore non-existent config files"
msgstr "忽略不存在的配置文件"


#: src/libslic3r/PrintConfig.cpp:6397
msgid "Do not fail if a file supplied to --load does not exist."
msgstr "如果提供給—load 的文件不存在, 不要報錯。"


#: src/libslic3r/PrintConfig.cpp:6400
msgid "Load config file"
msgstr "加載配置文件"


#: src/libslic3r/PrintConfig.cpp:6401
msgid ""
"Load configuration from the specified file. It can be used more than once to "
"load options from multiple files."
msgstr "從指定文件加載配置。可多次使用以從多個文件中加載參數。"


#: src/libslic3r/PrintConfig.cpp:6404
msgid "Output File"
msgstr "輸出文件"


#: src/libslic3r/PrintConfig.cpp:6405
msgid ""
"The file where the output will be written (if not specified, it will be "
"based on the input file)."
msgstr "輸出的文件（如果未指定，則將依據輸入文件）。"


#: src/libslic3r/PrintConfig.cpp:6421
msgid "Data directory"
msgstr "數據目錄"


#: src/libslic3r/PrintConfig.cpp:6422
msgid ""
"Load and store settings at the given directory. This is useful for "
"maintaining different profiles or including configurations from a network "
"storage."
msgstr ""
"在給定目錄中加載和存儲設置。這對於維護不同的配置文件或包括來自網絡存儲的配置"
"非常有用。"


#: src/libslic3r/PrintConfig.cpp:6425
msgid "Logging level"
msgstr "日誌級別"


#: src/libslic3r/SLAPrint.cpp:630
msgid ""
"Cannot proceed without support points! Add support points or disable support "
"generation."
msgstr "沒有支持點就無法繼續!添加支持點或禁用支持生成。"


#: src/libslic3r/SLAPrint.cpp:792
msgid "Slicing done"
msgstr "切片完成"


#: src/libslic3r/SLAPrintSteps.cpp:46
msgid "Slicing model"
msgstr "切片模型"


#: src/libslic3r/SLAPrintSteps.cpp:47 src/libslic3r/SLAPrintSteps.cpp:361
msgid "Generating support points"
msgstr "生成支持點"


#: src/libslic3r/SLAPrintSteps.cpp:48
msgid "Generating support tree"
msgstr "生成支持樹"


#: src/libslic3r/SLAPrintSteps.cpp:49
msgid "Generating pad"
msgstr "生成板"


#: src/libslic3r/SLAPrintSteps.cpp:50
msgid "Slicing supports"
msgstr "切片支持"


#: src/libslic3r/SLAPrintSteps.cpp:65
msgid "Merging slices and calculating statistics"
msgstr "合併切片和計算統計信息"


#: src/libslic3r/SLAPrintSteps.cpp:66
msgid "Rasterizing layers"
msgstr "柵格化圖層"


#: src/libslic3r/SLAPrintSteps.cpp:413 src/libslic3r/SLAPrintSteps.cpp:422
#: src/libslic3r/SLAPrintSteps.cpp:461
msgid "Visualizing supports"
msgstr "可視化支持"


#: src/libslic3r/Zipper.cpp:27
msgid "Error with zip archive"
msgstr "Zip 存檔出錯"

#: ../../ui_layout/extruder.ui : l6
msgid "Layer height limits"
msgstr "層高度限制"

#: ../../ui_layout/extruder.ui : l16
msgid "Only lift Z"
msgstr "僅提升 Z"

#: ../../ui_layout/extruder.ui : l34
msgid "Retraction when tool is disabled (advanced settings for multi-extruder setups)"
msgstr "禁用工具時的回縮 (多擠出機設置的高級設置)"

#: ../../ui_layout/filament.ui : l14
msgid "Bed"
msgstr "牀"

#: ../../ui_layout/filament.ui : l19
msgid "Filament properties"
msgstr "耗材絲特性"

#: ../../ui_layout/filament.ui : l23
msgid "Print speed override"
msgstr "列印速度覆蓋"

#: ../../ui_layout/filament.ui : l66
msgid "Toolchange parameters with single extruder MM printers"
msgstr "單擠出機 MM 印表機的工具更換參數"

#: ../../ui_layout/milling.ui : l9
msgid "G-Code"
msgstr "G-code"

#: ../../ui_layout/print.ui : l2
msgid "Vertical shells"
msgstr "垂直外殼"

#: ../../ui_layout/print.ui : l6
msgid "Horizontal shells"
msgstr "水平外殼"

#: ../../ui_layout/print.ui : l53
msgid "Gap Fill"
msgstr "間隙填充"

#: ../../ui_layout/print.ui : l79
msgid "Filtering"
msgstr "篩選"

#: ../../ui_layout/print.ui : l103
msgid "Other"
msgstr "其他"

#: ../../ui_layout/print.ui : l130
msgid "Reducing printing time"
msgstr "縮短列印時間"

#: ../../ui_layout/print.ui : l192
msgid "Raft"
msgstr "基座"

#: ../../ui_layout/print.ui : l195
msgid "Options for support material and raft"
msgstr "支撐材料和基座的選項"

#: ../../ui_layout/print.ui : l216
msgid "Speed for print moves"
msgstr "列印移動的速度"

#: ../../ui_layout/print.ui : l240
msgid "Speed for non-print moves"
msgstr "非列印移動的速度"

#: ../../ui_layout/print.ui : l242
msgid "Modifiers"
msgstr "武器性能修改"

#: ../../ui_layout/print.ui : l243
msgid "First layer speed"
msgstr "首層速度"

#: ../../ui_layout/print.ui : l251
msgid "Acceleration control (advanced)"
msgstr "加速控制 (高級)"

#: ../../ui_layout/print.ui : l257
msgid "Autospeed (advanced)"
msgstr "自動調速 (高級)"

#: ../../ui_layout/print.ui : l261
msgid "width"
msgstr "寬度"

#: ../../ui_layout/print.ui : l262
msgid "Extrusion width"
msgstr "擠出寬度"

#: ../../ui_layout/print.ui : l267
msgid "first layer"
msgstr "首層"

#: ../../ui_layout/print.ui : l271
msgid "perimeter"
msgstr "周長"

#: ../../ui_layout/print.ui : l275
msgid "external perimeter"
msgstr "外部輪廓"

#: ../../ui_layout/print.ui : l291
msgid "support material"
msgstr "支撐材料"

#: ../../ui_layout/print.ui : l294
msgid "skirt"
msgstr "裙邊"

#: ../../ui_layout/print.ui : l306
msgid "Flow"
msgstr "流量"

#: ../../ui_layout/print.ui : l322
msgid "Ooze prevention"
msgstr "Ooze 預防"

#: ../../ui_layout/print.ui : l343
msgid "Sequential printing"
msgstr "順序列印"

#: ../../ui_layout/print.ui : l347
msgid "Extruder clearance (mm)"
msgstr "擠出機間隙 (毫米)"

#: ../../ui_layout/printer_fff.ui : l2
msgid "Size and coordinates"
msgstr "尺寸和座標"

#: ../../ui_layout/printer_fff.ui : l56
msgid "Between objects G-code (for sequential printing)"
msgstr "模型對象之間的 G-code  (用於順序列印)"

#: ../../ui_layout/printer_sla.ui : l7
msgid "Display"
msgstr "顯示"

#: ../../ui_layout/printer_sla.ui : l20
msgid "Tilt"
msgstr "傾斜"

#: ../../ui_layout/printer_sla.ui : l21
msgid "Tilt time"
msgstr "傾斜時間"

#: ../../ui_layout/sla_print.ui : l33
msgid "pad"
msgstr "墊"