# Translation file for english
# Copyright (C) 2021
# This file is distributed under the same license as Slic3r.
#
msgid ""
msgstr ""
"Project-Id-Version: Slic3r\n"
"POT-Creation-Date: 2022-04-15 00:00\n"
"PO-Revision-Date: 2022-04-15 00:00\n"
"Last-Translator:\n"
"Language-Team:\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Language:en\n"

msgid ""
"A boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."
msgstr ""
"A Boolean expression using the configuration values of an active print "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active print profile."

msgid ""
"A boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."
msgstr ""
"A Boolean expression using the configuration values of an active printer "
"profile. If this expression evaluates to true, this profile is considered "
"compatible with the active printer profile."

msgid ""
"Additionally a backup snapshot of the whole configuration is created before "
"an update is applied."
msgstr ""
"Additionally, a backup snapshot of the whole configuration is created before "
"an update is applied."

msgid "Autogeneration will erase all manually edited points."
msgstr "Auto Generation will erase all manually edited points."

msgid "Autospeed (advanced)"
msgstr "Auto Speed (advanced)"

msgid "Before roll back"
msgstr "Before rollback"

msgid "Buttons And Text Colors Description"
msgstr "Buttons and Text Colors Description"

msgid "Density of internal infill, expressed in the range 0% - 100%."
msgstr "Density of internal infill, expressed in the range 0% - 100%."

msgid "Don't notify about new releases any more"
msgstr "Don't notify about new releases anymore"

msgid ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanisms, no automatic installation is done."
msgstr ""
"If enabled, %s checks for new application versions online. When a new "
"version becomes available, a notification is displayed at the next "
"application startup (never during program usage). This is only a "
"notification mechanism, no automatic installation is done."

msgid ""
"If enabled, %s downloads updates of built-in system presets in the "
"background.These updates are downloaded into a separate temporary location."
"When a new preset version becomes available it is offered at application "
"startup."
msgstr ""
"If enabled, %s downloads updates of built-in system presets in the "
"background. These updates are downloaded into a separate temporary location. "
"When a new preset version becomes available it is offered at application "
"startup."

msgid ""
"If enabled, the wipe tower will not be printed on layers with no "
"toolchanges. On layers with a toolchange, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."
msgstr ""
"If enabled, the wipe tower will not be printed on layers with no tool "
"changes. On layers with a tool change, extruder will travel downward to "
"print the wipe tower. User is responsible for ensuring there is no collision "
"with the print."

msgid ""
"Object will be used to purge the nozzle after a toolchange to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."
msgstr ""
"Object will be used to purge the nozzle after a tool change to save material "
"that would otherwise end up in the wipe tower and decrease print time. "
"Colours of the objects will be mixed as a result."

msgid ""
"One or more object were assigned an extruder that the printer does not have."
msgstr ""
"One or more objects were assigned an extruder that the printer does not have."

msgid "Retraction Length (Toolchange)"
msgstr "Retraction Length (Tool change)"

msgid ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If theyare closer, they will get merged into one pad."
msgstr ""
"Some objects can get along with a few smaller pads instead of a single big "
"one. This parameter defines how far the center of two smaller pads should "
"be. If they are closer, they will get merged into one pad."

msgid ""
"Speed used for unloading the filament on the wipe tower (does not affect  "
"initial part of unloading just after ramming). "
msgstr ""
"Speed used for unloading the filament on the wipe tower (does not affect "
"initial part of unloading just after ramming). "

msgid ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentually.\n"
"This code won't be processed during G-code generation."
msgstr ""
"The sequential print is on.\n"
"It's impossible to apply any custom G-code for objects printing "
"sequentially.\n"
"This code won't be processed during G-code generation."

msgid ""
"This matrix describes volumes (in cubic milimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools. "
msgstr ""
"This matrix describes volumes (in cubic millimetres) required to purge the "
"new filament on the wipe tower for any given pair of tools. "

msgid ""
"Time to wait after the filament is unloaded. May help to get reliable "
"toolchanges with flexible materials that may need more time to shrink to "
"original dimensions. "
msgstr ""
"Time to wait after the filament is unloaded. May help to get reliable tool "
"changes with flexible materials that may need more time to shrink to "
"original dimensions. "

msgid "Toolchange parameters with single extruder MM printers"
msgstr "Toolchange parameters with single extruder MM printers"

msgid "Unknown error occured"
msgstr "Unknown error occurred"

msgid ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc)."
msgstr ""
"When printing multi-material objects, this settings will make Slic3r to clip "
"the overlapping object parts one by the other (2nd part will be clipped by "
"the 1st, 3rd part will be clipped by the 1st and 2nd etc.)."

msgid ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further,  if negative, the loading move is shorter "
"than unloading. "
msgstr ""
"When set to zero, the distance the filament is moved from parking position "
"during load is exactly the same as it was moved back during unload. When "
"positive, it is loaded further, if negative, the loading move is shorter "
"than unloading. "

msgid "WHITE BULLET icon indicates a non system (or non default) preset."
msgstr "WHITE BULLET icon indicates a non-system (or non-default) preset."