DUE 2.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051
  1. #!/usr/bin/env bash
  2. #
  3. # Build tests for DUE (Atmel SAM3X8E ARM Cortex-M3)
  4. #
  5. # exit on first failure
  6. set -e
  7. restore_configs
  8. opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB \
  9. LCD_LANGUAGE bg \
  10. TEMP_SENSOR_0 -2 TEMP_SENSOR_BED 2 \
  11. GRID_MAX_POINTS_X 16 \
  12. E0_AUTO_FAN_PIN 8 FANMUX0_PIN 53 EXTRUDER_AUTO_FAN_SPEED 100 \
  13. TEMP_SENSOR_CHAMBER 3 TEMP_CHAMBER_PIN 6 HEATER_CHAMBER_PIN 45
  14. opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \
  15. FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING \
  16. ASSISTED_TRAMMING REPORT_TRAMMING_MM ASSISTED_TRAMMING_WAIT_POSITION \
  17. EEPROM_SETTINGS SDSUPPORT BINARY_FILE_TRANSFER \
  18. BLINKM PCA9533 PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN \
  19. NEOPIXEL_LED NEOPIXEL_PIN CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_USE_RGB_LED CASE_LIGHT_MENU \
  20. NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_DISTANCE_MM FILAMENT_RUNOUT_SENSOR \
  21. AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
  22. SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE CALIBRATION_GCODE \
  23. BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \
  24. FWRETRACT ARC_SUPPORT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
  25. PSU_CONTROL AUTO_POWER_CONTROL E_DUAL_STEPPER_DRIVERS \
  26. PIDTEMPBED SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER \
  27. PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL \
  28. EXTENSIBLE_UI
  29. opt_add EXTUI_EXAMPLE
  30. exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), ExtUI, S-Curve, many options." "$3"
  31. #
  32. # RADDS with BLTouch, ABL(B), 3 x Z auto-align
  33. #
  34. restore_configs
  35. opt_set MOTHERBOARD BOARD_RADDS Z_DRIVER_TYPE A4988 Z2_DRIVER_TYPE A4988 Z3_DRIVER_TYPE A4988
  36. opt_enable USE_XMAX_PLUG USE_YMAX_PLUG ENDSTOPPULLUPS BLTOUCH AUTO_BED_LEVELING_BILINEAR \
  37. Z_STEPPER_AUTO_ALIGN Z_STEPPER_ALIGN_STEPPER_XY Z_SAFE_HOMING
  38. pins_set ramps/RAMPS X_MAX_PIN -1
  39. pins_set ramps/RAMPS Y_MAX_PIN -1
  40. exec_test $1 $2 "RADDS with ABL (Bilinear), Triple Z Axis, Z_STEPPER_AUTO_ALIGN, E_DUAL_STEPPER_DRIVERS" "$3"
  41. #
  42. # Test SWITCHING_EXTRUDER
  43. #
  44. restore_configs
  45. opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF LCD_LANGUAGE fi EXTRUDERS 2 NUM_SERVOS 1
  46. opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY
  47. exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY" "$3"