| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204 |
- /*
- Copyright (c) 2011 Arduino. All right reserved.
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU Lesser General Public License for more details.
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
- #ifndef _VARIANT_ARDUINO_STM32_
- #define _VARIANT_ARDUINO_STM32_
- #ifdef __cplusplus
- extern "C" {
- #endif // __cplusplus
- /*----------------------------------------------------------------------------
- * Pins
- *----------------------------------------------------------------------------*/
- // | DIGITAL | ANALOG IN | ANALOG OUT | UART/USART | TWI | SPI | SPECIAL |
- // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
- #define PA0 PIN_A0 // | 0 | A0 (ADC1) | | UART4_TX | | | |
- #define PA1 PIN_A1 // | 1 | A1 (ADC1) | | UART4_RX | | | |
- #define PA2 PIN_A2 // | 2 | A2 (ADC1) | | USART2_TX | | | |
- #define PA3 PIN_A3 // | 3 | A3 (ADC1) | | USART2_RX | | | |
- #define PA4 PIN_A4 // | 4 | A4 (ADC1) | DAC_OUT1 | | | SPI1_SS, (SPI3_SS) | |
- #define PA5 PIN_A5 // | 5 | A5 (ADC1) | DAC_OUT2 | | | SPI1_SCK | |
- #define PA6 PIN_A6 // | 6 | A6 (ADC1) | | | | SPI1_MISO | |
- #define PA7 PIN_A7 // | 7 | A7 (ADC1) | | | | SPI1_MOSI | |
- #define PA8 8 // | 8 | | | | TWI3_SCL | | |
- #define PA9 9 // | 9 | | | USART1_TX | | | |
- #define PA10 10 // | 10 | | | USART1_RX | | | |
- #define PA11 11 // | 11 | | | | | | |
- #define PA12 12 // | 12 | | | | | | |
- #define PA13 13 // | 13 | | | | | | SWD_SWDIO |
- #define PA14 14 // | 14 | | | | | | SWD_SWCLK |
- #define PA15 15 // | 15 | | | | | SPI3_SS, (SPI1_SS) | |
- // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
- #define PB0 PIN_A8 // | 16 | A8 (ADC1) | | | | | |
- #define PB1 PIN_A9 // | 17 | A9 (ADC1) | | | | | |
- #define PB2 18 // | 18 | | | | | | BOOT1 |
- #define PB3 19 // | 19 | | | | | SPI3_SCK, (SPI1_SCK) | |
- #define PB4 20 // | 20 | | | | | SPI3_MISO, (SPI1_MISO) | |
- #define PB5 21 // | 21 | | | | | SPI3_MOSI, (SPI1_MOSI) | |
- #define PB6 22 // | 22 | | | USART1_TX | TWI1_SCL | | |
- #define PB7 23 // | 23 | | | USART1_RX | TWI1_SDA | | |
- #define PB8 24 // | 24 | | | | TWI1_SCL | | |
- #define PB9 25 // | 25 | | | | TWI1_SDA | SPI2_SS | |
- #define PB10 26 // | 26 | | | USART3_TX, (UART4_TX) | TWI2_SCL | SPI2_SCK | |
- #define PB11 27 // | 27 | | | USART3_RX | TWI2_SDA | | |
- #define PB12 28 // | 28 | | | | | SPI2_SS | |
- #define PB13 29 // | 29 | | | | | SPI2_SCK | |
- #define PB14 30 // | 30 | | | | | SPI2_MISO | |
- #define PB15 31 // | 31 | | | | | SPI2_MOSI | |
- // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
- #define PC0 PIN_A10 // | 32 | A10 (ADC1) | | | | | |
- #define PC1 PIN_A11 // | 33 | A11 (ADC1) | | | | | |
- #define PC2 PIN_A12 // | 34 | A12 (ADC1) | | | | SPI2_MISO | |
- #define PC3 PIN_A13 // | 35 | A13 (ADC1) | | | | SPI2_MOSI | |
- #define PC4 PIN_A14 // | 36 | A14 (ADC1) | | | | | |
- #define PC5 PIN_A15 // | 37 | A15 (ADC1) | | USART3_RX | | | |
- #define PC6 38 // | 38 | | | USART6_TX | | | |
- #define PC7 39 // | 39 | | | USART6_RX | | | |
- #define PC8 40 // | 40 | | | | | | |
- #define PC9 41 // | 41 | | | USART3_TX | TWI3_SDA | | |
- #define PC10 42 // | 42 | | | | | SPI3_SCK | |
- #define PC11 43 // | 43 | | | USART3_RX, (UART4_RX) | | SPI3_MISO | |
- #define PC12 44 // | 44 | | | UART5_TX | | SPI3_MOSI | |
- #define PC13 45 // | 45 | | | | | | |
- #define PC14 46 // | 46 | | | | | | OSC32_IN |
- #define PC15 47 // | 47 | | | | | | OSC32_OUT |
- // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
- #define PD0 48 // | 48 | | | | | | |
- #define PD1 49 // | 49 | | | | | | |
- #define PD2 50 // | 50 | | | UART5_RX | | | |
- #define PD3 51 // | 51 | | | | | | |
- #define PD4 52 // | 52 | | | | | | |
- #define PD5 53 // | 53 | | | USART2_TX | | | |
- #define PD6 54 // | 54 | | | USART2_RX | | | |
- #define PD7 55 // | 55 | | | | | | |
- #define PD8 56 // | 56 | | | USART3_TX | | | |
- #define PD9 57 // | 57 | | | USART3_RX | | | |
- #define PD10 58 // | 58 | | | | | | |
- #define PD11 59 // | 59 | | | | | | |
- #define PD12 60 // | 60 | | | | | | |
- #define PD13 61 // | 61 | | | | | | |
- #define PD14 62 // | 62 | | | | | | |
- #define PD15 63 // | 63 | | | | | | |
- // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
- #define PE0 64 // | 64 | | | | | | |
- #define PE1 65 // | 65 | | | | | | |
- #define PE2 66 // | 66 | | | | | | |
- #define PE3 67 // | 67 | | | | | | |
- #define PE4 68 // | 68 | | | | | | |
- #define PE5 69 // | 69 | | | | | | |
- #define PE6 70 // | 70 | | | | | | |
- #define PE7 71 // | 71 | | | | | | |
- #define PE8 72 // | 72 | | | | | | |
- #define PE9 73 // | 73 | | | | | | |
- #define PE10 74 // | 74 | | | | | | |
- #define PE11 75 // | 75 | | | | | | |
- #define PE12 76 // | 76 | | | | | | |
- #define PE13 77 // | 77 | | | | | | |
- #define PE14 78 // | 78 | | | | | | |
- #define PE15 79 // | 79 | | | | | | |
- // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
- #define PH0 80 // | 80 | | | | | | OSC_IN |
- #define PH1 81 // | 81 | | | | | | OSC_OUT |
- // |---------|------------|------------|-----------------------|----------------------|-----------------------------------|-----------|
- // This must be a literal
- #define NUM_DIGITAL_PINS 82
- #define NUM_ANALOG_INPUTS 16
- // On-board LED pin number
- #ifndef LED_BUILTIN
- #define LED_BUILTIN PA5
- #endif
- #define LED_GREEN LED_BUILTIN
- // On-board user button
- #ifndef USER_BTN
- #define USER_BTN PC13
- #endif
- // SPI definitions
- #define PIN_SPI_SS PA4
- #define PIN_SPI_SS1 PA4
- #define PIN_SPI_SS2 PB12
- #define PIN_SPI_SS3 PA15
- #define PIN_SPI_MOSI PA7
- #define PIN_SPI_MISO PA6
- #define PIN_SPI_SCK PA5
- // I2C definitions
- #ifndef PIN_WIRE_SDA
- #define PIN_WIRE_SDA PB9
- #endif
- #ifndef PIN_WIRE_SCL
- #define PIN_WIRE_SCL PB8
- #endif
- // Timer Definitions
- // Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin
- #ifndef TIMER_TONE
- #define TIMER_TONE TIM6 // TIMER_TONE must be defined in this file
- #endif
- #ifndef TIMER_SERVO
- #define TIMER_SERVO TIM7 // TIMER_SERVO must be defined in this file
- #endif
- #ifndef TIMER_SERIAL
- #define TIMER_SERIAL TIM5 // TIMER_SERIAL must be defined in this file
- #endif
- // UART Definitions
- #define SERIAL_UART_INSTANCE 2
- // Default pin used for 'Serial' instance
- // Mandatory for Firmata
- #define PIN_SERIAL_RX PA3
- #define PIN_SERIAL_TX PA2
- /* Extra HAL modules */
- #define HAL_DAC_MODULE_ENABLED
- #ifdef __cplusplus
- } // extern "C"
- #endif
- /*----------------------------------------------------------------------------
- * Arduino objects - C++ only
- *----------------------------------------------------------------------------*/
- #ifdef __cplusplus
- // These serial port names are intended to allow libraries and architecture-neutral
- // sketches to automatically default to the correct port name for a particular type
- // of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
- // the first hardware serial port whose RX/TX pins are not dedicated to another use.
- //
- // SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
- //
- // SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
- //
- // SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
- //
- // SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
- //
- // SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
- // pins are NOT connected to anything by default.
- #define SERIAL_PORT_MONITOR Serial
- #define SERIAL_PORT_HARDWARE Serial1
- #endif
- #endif /* _VARIANT_ARDUINO_STM32_ */
|
