SMusatov/Marlin-Ender-3: Marlin for my Ender 3 @ f505bc06ed915b82126932756266064f623c20fa

Creality Ender-5 Pro with BTT SKR Mini E3

The configuration was made on a Phaetus Dragon hotend and a BMG clone extruder, running the Leon-Me Gen 5 cooling shroud with dual 5015s.

Set SERIAL_PORT to 2
Set SERIAL_PORT_2 to -1
Set MOTHERBOARD to BOARD_BTT_SKR_MINI_E3_V2_0
Enabled PIDTEMPBED and set default values
Set EXTRUDE_MAXLENGTH to 600 to allow BMG extruder load/unload
Set [XYZE]_DRIVER_TYPE to TMC2209
Enabled CLASSIC_JERK and set default values
Disabled Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
Enabled USE_PROBE_FOR_Z_HOMING
Set Z_MIN_PROBE_PIN to PC14
Enabled BLTOUCH
Set PROBING_MARGIN to 8
Set XY_PROBE_FEEDRATE and Z_PROBE_FEEDRATE_FAST to faster values
Set MULTIPLE_PROBING to 2
Set INVERT_[XYZE]_DIR to true
Set X_BED_SIZE to 230 to regain bed size
Set Y_BED_SIZE to 225 to regain bed size
Enabled SOFT_ENDSTOPS_MENU_ITEM
Enabled AUTO_BED_LEVELING_BILINEAR
Enabled RESTORE_LEVELING_AFTER_G28
Enabled PREHEAT_BEFORE_LEVELING and set default values
Enabled G26_MESH_VALIDATION
Set GRID_MAX_POINTS_X to 9
Enabled EXTRAPOLATE_BEYOND_GRID
Enabled MESH_EDIT_GFX_OVERLAY, set MESH_INSET to 10 and GRID_MAX_POINTS_X to 9 (for UBL)
Enabled LCD_BED_LEVELING
Enabled MESH_EDIT_MENU
Enabled LCD_BED_TRAMMING
Enabled Z_SAFE_HOMING
Set HOMING_FEEDRATE_MM_M to faster values
Enabled NOZZLE_PARK_FEATURE
Disabled SPEAKER to work around fan stuck at 100% issue
Enabled FAN_SOFT_PWM for my dual 5015 setup