Главная Обзор Помощь
Вход
SMusatov
/
Marlin-Ender-3
1
0
Ответвить 0
Файлы Вики
Дерево: f505bc06ed
Ветки Метки
Marlin-Ender-3
/
buildroot
/
share
/
PlatformIO
/
variants
/
MARLIN_TH3D_EZBOARD_V2
/
PeripheralPins.c

PeripheralPins.c 20 KB
История Исходник

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314 
  1. /*
    2. 

  2.  *******************************************************************************
    3. 

  3.  * Copyright (c) 2020, STMicroelectronics
    4. 

  4.  * All rights reserved.
    5. 

  5.  *
    6. 

  6.  * This software component is licensed by ST under BSD 3-Clause license,
    7. 

  7.  * the "License"; You may not use this file except in compliance with the
    8. 

  8.  * License. You may obtain a copy of the License at:
    9. 

  9.  *                        opensource.org/licenses/BSD-3-Clause
    10. 

  10.  *
    11. 

  11.  *******************************************************************************
    12. 

  12.  * Automatically generated from STM32F405RGTx.xml
    13. 

  13.  */
    14. 

  14. #include "Arduino.h"
    15. 

  15. #include "PeripheralPins.h"
    16. 

  16. 

  17. /* =====
    18. 

  18.  * Note: Commented lines are alternative possibilities which are not used per default.
    19. 

  19.  *       If you change them, you will have to know what you do
    20. 

  20.  * =====
    21. 

  21.  */
    22. 

  22. 

  23. //*** ADC ***
    24. 

  24. 

  25. #ifdef HAL_ADC_MODULE_ENABLED
    26. 

  26. WEAK const PinMap PinMap_ADC[] = {
    27. 

  27.   {PA_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)},    // ADC1_IN0  TEMP_BED
    28. 

  28.   //{PA_0,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)},  // ADC2_IN0  TEMP_BED
    29. 

  29.   //{PA_0,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)},  // ADC3_IN0  TEMP_BED
    30. 

  30.   {PA_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)},    // ADC1_IN1  TEMP_0
    31. 

  31.   //{PA_1,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)},  // ADC2_IN1
    32. 

  32.   //{PA_1,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)},  // ADC3_IN1
    33. 

  33.   {PA_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)},    // ADC1_IN2  SERVO0
    34. 

  34.   //{PA_2,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)},  // ADC2_IN2
    35. 

  35.   //{PA_2,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)},  // ADC3_IN2
    36. 

  36.   //{PA_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)},  // ADC1_IN3  Z_STEP
    37. 

  37.   //{PA_3,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)},  // ADC2_IN3
    38. 

  38.   //{PA_3,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)},  // ADC3_IN3
    39. 

  39.   //{PA_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)},  // ADC1_IN4  SPI-SEL ONBOARD SD
    40. 

  40.   //{PA_4,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)},  // ADC2_IN4
    41. 

  41.   //{PA_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)},  // ADC1_IN5  SPI-SCK
    42. 

  42.   //{PA_5,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)},  // ADC2_IN5
    43. 

  43.   //{PA_6,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)},  // ADC1_IN6  SPI-MISO
    44. 

  44.   //{PA_6,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)},  // ADC2_IN6
    45. 

  45.   //{PA_7,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)},  // ADC1_IN7  SPI-MOSI
    46. 

  46.   //{PA_7,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)},  // ADC2_IN7
    47. 

  47.   //{PB_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)},  // ADC1_IN8  BTN_ENC
    48. 

  48.   //{PB_0,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)},  // ADC2_IN8
    49. 

  49.   //{PB_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)},  // ADC1_IN9  I2C1 EEPROM
    50. 

  50.   //{PB_1,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)},  // ADC2_IN9
    51. 

  51.   //{PC_0,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10  FIL_RUNOUT
    52. 

  52.   //{PC_0,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
    53. 

  53.   //{PC_0,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10
    54. 

  54.   //{PC_1,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11  X_STOP
    55. 

  55.   //{PC_1,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
    56. 

  56.   //{PC_1,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
    57. 

  57.   //{PC_2,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12  Y_STOP
    58. 

  58.   //{PC_2,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
    59. 

  59.   //{PC_2,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
    60. 

  60.   //{PC_3,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13  Z_STOP
    61. 

  61.   //{PC_3,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
    62. 

  62.   //{PC_3,  ADC3,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13
    63. 

  63.   //{PC_4,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14  BTN_EN1
    64. 

  64.   //{PC_4,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
    65. 

  65.   //{PC_5,  ADC1,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15  BTN_EN2
    66. 

  66.   //{PC_5,  ADC2,  STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
    67. 

  67.   {NC,    NP,    0}
    68. 

  68. };
    69. 

  69. #endif
    70. 

  70. 

  71. //*** DAC ***
    72. 

  72. 

  73. #ifdef HAL_DAC_MODULE_ENABLED
    74. 

  74. WEAK const PinMap PinMap_DAC[] = {
    75. 

  75.   //{PA_4,  DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
    76. 

  76.   //{PA_5,  DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
    77. 

  77.   {NC,    NP,    0}
    78. 

  78. };
    79. 

  79. #endif
    80. 

  80. 

  81. //*** I2C ***
    82. 

  82. 

  83. #ifdef HAL_I2C_MODULE_ENABLED
    84. 

  84. WEAK const PinMap PinMap_I2C_SDA[] = {
    85. 

  85.   {PB_7,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},    // I2C1 SDA (EEPROM)
    86. 

  86.   //{PB_9,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},  // YDIAG
    87. 

  87.   //{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},  // E0_DIR
    88. 

  88.   //{PC_9,  I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},  // BED / HEATER1
    89. 

  89.   {NC,    NP,    0}
    90. 

  90. };
    91. 

  91. 

  92. WEAK const PinMap PinMap_I2C_SCL[] = {
    93. 

  93.   //{PA_8,  I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},  // NEOPIXEL
    94. 

  94.   {PB_6,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},    // I2C1 SCL (EEPROM)
    95. 

  95.   //{PB_8,  I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},  // Y_STEP
    96. 

  96.   //{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},  // EDIAG
    97. 

  97.   {NC,    NP,    0}
    98. 

  98. };
    99. 

  99. #endif
    100. 

  100. 

  101. //*** PWM ***
    102. 

  102. 

  103. #ifdef HAL_TIM_MODULE_ENABLED
    104. 

  104. WEAK const PinMap PinMap_PWM[] = {
    105. 

  105.   //{PA_0,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)},  // TIM2_CH1   TEMP_BED
    106. 

  106.   //{PA_0,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)},  // TIM5_CH1
    107. 

  107. 

  108.   //{PA_1,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)},  // TIM2_CH2   TEMP_0
    109. 

  109.   //{PA_1,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)},  // TIM5_CH2
    110. 

  110. 

  111.   //{PA_2,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)},  // TIM2_CH3   SERVO0
    112. 

  112.   //{PA_2,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)},  // TIM5_CH3
    113. 

  113.   //{PA_2,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)},  // TIM9_CH1
    114. 

  114. 

  115.   //{PA_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)},  // TIM2_CH4   Z_STEP
    116. 

  116.   //{PA_3,  TIM5,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)},  // TIM5_CH4
    117. 

  117.   //{PA_3,  TIM9,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)},  // TIM9_CH2
    118. 

  118. 

  119.   //{PA_5,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)},  // TIM2_CH1   SPI-SCK
    120. 

  120.   //{PA_5,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)},  // TIM8_CH1N
    121. 

  121. 

  122.   //{PA_6,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)},  // TIM3_CH1   SPI-MISO
    123. 

  123.   //{PA_6,  TIM13,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
    124. 

  124. 

  125.   //{PA_7,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)},  // TIM1_CH1N  SPI-MOSI
    126. 

  126.   //{PA_7,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)},  // TIM3_CH2
    127. 

  127.   //{PA_7,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)},  // TIM8_CH1N
    128. 

  128.   //{PA_7,  TIM14,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
    129. 

  129. 

  130.   //{PA_8,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)},  // TIM1_CH1   NEOPIXEL
    131. 

  131.   //{PA_9,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)},  // TIM1_CH2   SERIAL_TX (HEADER)
    132. 

  132.   //{PA_10, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)},  // TIM1_CH3   SERIAL_RX (HEADER)
    133. 

  133.   //{PA_11, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)},  // TIM1_CH4   USB H
    134. 

  134.   //{PA_15, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)},  // TIM2_CH1   E0_STEP
    135. 

  135. 

  136.   //{PB_0,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)},  // TIM1_CH2N  BTN_ENC
    137. 

  137.   //{PB_0,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)},  // TIM3_CH3
    138. 

  138.   //{PB_0,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)},  // TIM8_CH2N
    139. 

  139. 

  140.   //{PB_1,  TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)},  // TIM1_CH3N  Z_DIR
    141. 

  141.   //{PB_1,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)},  // TIM3_CH4
    142. 

  142.   //{PB_1,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)},  // TIM8_CH3N
    143. 

  143. 

  144.   //{PB_3,  TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)},  // TIM2_CH2   X_STEP
    145. 

  145.   //{PB_4,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)},  // TIM3_CH1   XDIAG
    146. 

  146.   //{PB_5,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)},  // TIM3_CH2   X_ENABLE
    147. 

  147.   //{PB_6,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)},  // TIM4_CH1   I2C1_SCL (EEPROM)
    148. 

  148.   //{PB_7,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)},  // TIM4_CH2   I2C1_SDA (EEPROM)
    149. 

  149. 

  150.   //{PB_8,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)},  // TIM4_CH3   Y_STEP
    151. 

  151.   //{PB_8,  TIM10,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
    152. 

  152. 

  153.   //{PB_9,  TIM4,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)},  // TIM4_CH4   YDIAG
    154. 

  154.   //{PB_9,  TIM11,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
    155. 

  155. 

  156.   //{PB_10, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)},  // TIM2_CH3   EDIAG
    157. 

  157.   //{PB_11, TIM2,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)},  // TIM2_CH4   E0_DIR
    158. 

  158.   //{PB_13, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)},  // TIM1_CH1N  LCD_PINS_D4
    159. 

  159. 

  160.   //{PB_14, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)},  // TIM1_CH2N  LCD-MISO
    161. 

  161.   //{PB_14, TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)},  // TIM8_CH2N
    162. 

  162.   //{PB_14, TIM12,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
    163. 

  163. 

  164.   //{PB_15, TIM1,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)},  // TIM1_CH3N  LCD_PINS_ENABLE
    165. 

  165.   //{PB_15, TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)},  // TIM8_CH3N
    166. 

  166.   //{PB_15, TIM12,  STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
    167. 

  167. 

  168.   {PC_6,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)},    // TIM3_CH1  FAN
    169. 

  169.   //{PC_6,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)},  // TIM8_CH1
    170. 

  170. 

  171.   {PC_7,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)},    // TIM3_CH2  FAN1 / AUTO_FAN
    172. 

  172.   //{PC_7,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)},  // TIM8_CH2
    173. 

  173. 

  174.   {PC_8,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)},    // TIM3_CH3  HEATER0
    175. 

  175.   //{PC_8,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)},  // TIM8_CH3
    176. 

  176. 

  177.   {PC_9,  TIM3,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)},    // TIM3_CH4  BED / HEATER1
    178. 

  178.   //{PC_9,  TIM8,   STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)},  // TIM8_CH4
    179. 

  179.   {NC,    NP,    0}
    180. 

  180. };
    181. 

  181. #endif
    182. 

  182. 

  183. //*** SERIAL ***
    184. 

  184. 

  185. #ifdef HAL_UART_MODULE_ENABLED
    186. 

  186. WEAK const PinMap PinMap_UART_TX[] = {
    187. 

  187.   //{PA_0,  UART4,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},   // TEMP_BED
    188. 

  188.   //{PA_2,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},  // SERVO0
    189. 

  189.   {PA_9,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},    // SERIAL_TX (HEADER)
    190. 

  190.   //{PB_6,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},  // I2C1_SCL (EEPROM)
    191. 

  191.   //{PB_10, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},  // EDIAG
    192. 

  192.   //{PC_6,  USART6,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},  // FAN
    193. 

  193.   {PC_10, UART4,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},     // SERIAL_TX (TMC)
    194. 

  194.   //{PC_10, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},  // SERIAL_TX (TMC)
    195. 

  195.   //{PC_12, UART5,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},   // Y_ENABLE
    196. 

  196.   {NC,    NP,    0}
    197. 

  197. };
    198. 

  198. 

  199. WEAK const PinMap PinMap_UART_RX[] = {
    200. 

  200.   //{PA_1,  UART4,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},   // TEMP_0
    201. 

  201.   //{PA_3,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},  // Z_STEP
    202. 

  202.   {PA_10, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},    // SERIAL_RX (HEADER)
    203. 

  203.   //{PB_7,  USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},  // I2C1 SDA (EEPROM)
    204. 

  204.   //{PB_11, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},  // E_DIR
    205. 

  205.   //{PC_7,  USART6,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},  // FAN1 / AUTO_FAN
    206. 

  206.   {PC_11, UART4,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},     // SERIAL_RX (TMC)
    207. 

  207.   //{PC_11, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},  // SERIAL_RX (TMC)
    208. 

  208.   //{PD_2,  UART5,   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},   // X_DIR
    209. 

  209.   {NC,    NP,    0}
    210. 

  210. };
    211. 

  211. 

  212. WEAK const PinMap PinMap_UART_RTS[] = {
    213. 

  213.   //{PA_1,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // TEMP_0
    214. 

  214.   //{PA_12, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // USB D
    215. 

  215.   //{PB_14, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // LCD-MISO
    216. 

  216.   {NC,    NP,    0}
    217. 

  217. };
    218. 

  218. 

  219. WEAK const PinMap PinMap_UART_CTS[] = {
    220. 

  220.   //{PA_0,  USART2,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},  // TEMP_BED / WKUP
    221. 

  221.   //{PA_11, USART1,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},  // USB H
    222. 

  222.   //{PB_13, USART3,  STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},  // LCD-SCK
    223. 

  223.   {NC,    NP,    0}
    224. 

  224. };
    225. 

  225. #endif
    226. 

  226. 

  227. //*** SPI ***
    228. 

  228. 

  229. #ifdef HAL_SPI_MODULE_ENABLED
    230. 

  230. WEAK const PinMap PinMap_SPI_MOSI[] = {
    231. 

  231.   {PA_7,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},    // SPI1 MOSI (SD)
    232. 

  232.   //{PB_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},  // X_ENABLE
    233. 

  233.   //{PB_5,  SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
    234. 

  234.   {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},    // SPI2 MOSI (LCD)
    235. 

  235.   //{PC_3,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},  // Z_STOP
    236. 

  236.   //{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},  // Y_ENABLE
    237. 

  237.   {NC,    NP,    0}
    238. 

  238. };
    239. 

  239. 

  240. WEAK const PinMap PinMap_SPI_MISO[] = {
    241. 

  241.   {PA_6,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},    // SPI1 MOSI (SD)
    242. 

  242.   //{PB_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},  // XDIAG
    243. 

  243.   //{PB_4,  SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
    244. 

  244.   {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},    // SPI2 MISO (LCD)
    245. 

  245.   //{PC_2,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},  // Y_STOP
    246. 

  246.   //{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},  // SERIAL_RX (TMC)
    247. 

  247.   {NC,    NP,    0}
    248. 

  248. };
    249. 

  249. 

  250. WEAK const PinMap PinMap_SPI_SCLK[] = {
    251. 

  251.   {PA_5,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},    // SPI1 CLK (SD)
    252. 

  252.   //{PB_3,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},  // X_STEP
    253. 

  253.   //{PB_3,  SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
    254. 

  254.   //{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},  // EDIAG
    255. 

  255.   {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},    // SPI2 SCK (LCD)
    256. 

  256.   //{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},  // SERIAL_TX (TMC)
    257. 

  257.   {NC,    NP,    0}
    258. 

  258. };
    259. 

  259. 

  260. WEAK const PinMap PinMap_SPI_SSEL[] = {
    261. 

  261.   {PA_4,  SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},    // SPI1 CS (SD)
    262. 

  262.   //{PA_4,  SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
    263. 

  263.   //{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},  // E0_STEP
    264. 

  264.   //{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
    265. 

  265.   //{PB_9,  SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},  // YDIAG
    266. 

  266.   {PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},    // SPI2 CS (LCD)
    267. 

  267.   {NC,    NP,    0}
    268. 

  268. };
    269. 

  269. #endif
    270. 

  270. 

  271. //*** No CAN ***
    272. 

  272. 

  273. //*** No ETHERNET ***
    274. 

  274. 

  275. //*** No QUADSPI ***
    276. 

  276. 

  277. //*** USB ***
    278. 

  278. 

  279. #ifdef HAL_PCD_MODULE_ENABLED
    280. 

  280. WEAK const PinMap PinMap_USB_OTG_FS[] = {
    281. 

  281.   //{PA_8,  USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF  NEOPIXEL
    282. 

  282.   //{PA_9,  USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS  SERIAL_TX (HEADER)
    283. 

  283.   //{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID  SERIAL_RX (HEADER)
    284. 

  284.   {PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM  USB H
    285. 

  285.   {PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP  USB D
    286. 

  286.   {NC,    NP,    0}
    287. 

  287. };
    288. 

  288. 

  289. WEAK const PinMap PinMap_USB_OTG_HS[] = {
    290. 

  290. #ifdef USE_USB_HS_IN_FS
    291. 

  291.   //{PA_4,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_SOF  CS (SD)
    292. 

  292.   //{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID   CS (LCD)
    293. 

  293.   //{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS        LCD_PINS_D4
    294. 

  294.   //{PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DM   MISO (LCD)
    295. 

  295.   //{PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DP   LCD_PINS_ENABLE
    296. 

  296. #else
    297. 

  297.   //{PA_3,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D0  Z_STEP
    298. 

  298.   //{PA_5,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_CK  SPI-SCK
    299. 

  299.   //{PB_0,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D1  BTN_ENC
    300. 

  300.   //{PB_1,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D2  I2C1 (EEPROM)
    301. 

  301.   //{PB_5,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D7  X_ENABLE
    302. 

  302.   //{PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D3  EDIAG
    303. 

  303.   //{PB_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D4  FAN
    304. 

  304.   //{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D5  CS (LCD)
    305. 

  305.   //{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D6  LCD_PINS_D4
    306. 

  306.   //{PC_0,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_STP  FIL_RUNOUT
    307. 

  307.   //{PC_2,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_DIR  Y_STOP
    308. 

  308.   //{PC_3,  USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_NXT  Z_STOP
    309. 

  309. #endif /* USE_USB_HS_IN_FS */
    310. 

  310.   {NC,    NP,    0}
    311. 

  311. };
    312. 

  312. #endif
    313. 

  313. 

  314. //*** No SDIO ***
    315.