# CR-10 S5 with BTT SKR E3 mini v3.0:

 - BLtouch v3.1 (conneted to the Z endstop pin)
 - Stock LCD (connected to the LCD's EXT3 spare port, with one single straight ribbon cable)
 - Bondtech or stock extruder
 - Bowden setup
 - All 4 fans are PWM controlled.

## Flashing Mainboard Firmware

The bootloader which handles flashing new firmware on this board remembers the last filename you used.

### Where to put the firmware file on the SDCard:

Put the `firmware.bin` file into the root folder.