gmax15plus_global_dual_very_thick.inst.cfg 1.5 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970
  1. [general]
  2. version = 4
  3. name = gMax 1.5+ Dual Very Thick Layers
  4. definition = gmax15plus_dual
  5. [metadata]
  6. setting_version = 16
  7. type = quality
  8. quality_type = extra_course
  9. weight = -3
  10. global_quality = True
  11. [values]
  12. layer_height = 0.32
  13. infill_before_walls = False
  14. infill_overlap = 20
  15. infill_pattern = grid
  16. speed_slowdown_layers = 1
  17. acceleration_enabled = True
  18. acceleration_print = 400
  19. acceleration_travel = 700
  20. coasting_enable = False
  21. coasting_volume = 0.0625
  22. retraction_combing = off
  23. retraction_amount = 0.75
  24. retraction_speed = 70
  25. material_flow = 98
  26. material_diameter = 1.75
  27. support_use_towers = False
  28. support_z_distance = 0.2
  29. support_xy_distance = 1.5
  30. support_join_distance = 10
  31. support_interface_enable = True
  32. support_interface_pattern = lines
  33. adhesion_type = skirt
  34. skirt_gap = 2
  35. cool_fan_speed = 70
  36. cool_fan_speed_max = 85
  37. skin_overlap = 10
  38. speed_print = 40
  39. speed_infill = =math.ceil(speed_print * 0.85)
  40. speed_layer_0 = =math.ceil(speed_print * 0.45)
  41. speed_topbottom = =math.ceil(speed_print * 0.75)
  42. speed_wall = =math.ceil(speed_print * 0.5)
  43. speed_wall_x = =math.ceil(speed_print * 0.7)
  44. top_bottom_pattern = lines
  45. top_layers = 3
  46. top_thickness = 1
  47. bottom_layers = 2
  48. wall_line_count = 2
  49. z_seam_corner = z_seam_corner_none
  50. ooze_shield_angle = 20
  51. ooze_shield_dist = 4
  52. ooze_shield_enabled = True
  53. prime_tower_enable = False
  54. prime_tower_position_x = 350
  55. prime_tower_position_y = 350
  56. switch_extruder_retraction_amount = 6
  57. switch_extruder_retraction_speeds = 60
  58. material_standby_temperature = =material_print_temperature - 10