Cura/resources/definitions/ultimaker2_plus_connect.def.json

{
    "version": 2,
    "name": "Ultimaker 2+ Connect",
    "inherits": "ultimaker2",
    "metadata":
    {
        "author": "Ultimaker",
        "manufacturer": "Ultimaker B.V.",
        "file_formats": "application/x-ufp;text/x-gcode",
        "platform": "ultimaker2_plus_connect_platform.obj",
        "exclude_materials": [
            "generic_hips",
            "generic_bam",
            "ultimaker_bam",
            "generic_pva",
            "ultimaker_pva",
            "ultimaker_petcf_black",
            "ultimaker_petcf_blue",
            "ultimaker_petcf_gray",
            "generic_petcf",
            "generic_cffcpe",
            "generic_cffpa",
            "generic_gffcpe",
            "generic_gffpa",
            "structur3d_dap100silicone"
        ],
        "first_start_actions": [],
        "has_machine_materials": true,
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains": { "0": "ultimaker2_plus_connect_extruder_0" },
        "platform_offset": [
            -1,
            -6,
            0
        ],
        "platform_texture": "Ultimaker2PlusConnectbackplate.png",
        "preferred_variant_name": "0.4 mm",
        "supported_actions": [],
        "supports_network_connection": true,
        "supports_usb_connection": false,
        "weight": 1
    },
    "overrides":
    {
        "gantry_height": { "value": "52" },
        "infill_overlap": { "value": "0" },
        "infill_pattern": { "value": "'zigzag' if infill_sparse_density > 80 else 'grid'" },
        "infill_wipe_dist": { "value": "0" },
        "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
        "machine_depth": { "default_value": 220 },
        "machine_disallowed_areas":
        {
            "default_value": [
                [
                    [-115, 112.5],
                    [-83, 112.5],
                    [-85, 104.0],
                    [-115, 104.0]
                ],
                [
                    [115, 112.5],
                    [115, 104.0],
                    [104, 104.0],
                    [102, 112.5]
                ],
                [
                    [-115, -112.5],
                    [-115, -104.0],
                    [-87, -104.0],
                    [-85, -112.5]
                ],
                [
                    [115, -112.5],
                    [104, -112.5],
                    [106, -104.0],
                    [115, -104.0]
                ]
            ]
        },
        "machine_end_gcode": { "value": "''" },
        "machine_gcode_flavor": { "default_value": "Griffin" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-44, 14],
                [-44, -34],
                [64, 14],
                [64, -34]
            ]
        },
        "machine_heat_zone_length": { "default_value": 20 },
        "machine_height": { "default_value": 205 },
        "machine_name": { "default_value": "Ultimaker 2+ Connect" },
        "machine_nozzle_head_distance": { "default_value": 5 },
        "machine_show_variants": { "default_value": true },
        "machine_start_gcode": { "value": "''" },
        "machine_width": { "default_value": 223 },
        "material_initial_print_temperature":
        {
            "maximum_value": 260,
            "value": "material_print_temperature"
        },
        "material_print_temperature": { "maximum_value": 260 },
        "material_print_temperature_layer_0": { "maximum_value": 260 },
        "meshfix_maximum_deviation": { "value": "(layer_height / 3) if magic_spiralize else (layer_height / 4)" },
        "meshfix_maximum_resolution": { "value": "(speed_wall_0 + speed_wall_x) / 60" },
        "meshfix_maximum_travel_resolution": { "value": 0.5 },
        "optimize_wall_printing_order": { "value": "True" },
        "prime_blob_enable":
        {
            "default_value": true,
            "enabled": true,
            "value": "resolveOrValue('print_sequence') != 'one_at_a_time'"
        },
        "retraction_prime_speed": { "value": "15" },
        "retraction_speed": { "value": "45" },
        "speed_support": { "value": "speed_wall_0" },
        "speed_wall_x": { "value": "speed_wall" },
        "zig_zaggify_infill": { "value": "gradual_infill_steps == 0" }
    }
}