makeit_pro_m.def.json 2.7 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253
  1. {
  2. "version": 2,
  3. "name": "Makeit Pro-M",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "unknown",
  9. "manufacturer": "Makeit 3D",
  10. "file_formats": "text/x-gcode",
  11. "has_materials": false,
  12. "machine_extruder_trains":
  13. {
  14. "0": "makeit_dual_1st",
  15. "1": "makeit_dual_2nd"
  16. }
  17. },
  18. "overrides":
  19. {
  20. "adhesion_type": { "default_value": "skirt" },
  21. "cool_min_layer_time_fan_speed_max": { "default_value": 5 },
  22. "gantry_height": { "value": "200" },
  23. "infill_sparse_density": { "default_value": 20 },
  24. "layer_height": { "default_value": 0.2 },
  25. "machine_center_is_zero": { "default_value": false },
  26. "machine_depth": { "default_value": 240 },
  27. "machine_end_gcode": { "default_value": "M104 T0 S0 ;1st extruder heater off\nM104 T1 S0 ;2nd extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-5 F9000 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+5 X+20 Y+20 F9000 ;move Z up a bit\nM117 MAKEiT Pro@Done\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning\nM81" },
  28. "machine_extruder_count": { "default_value": 2 },
  29. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  30. "machine_head_with_fans_polygon":
  31. {
  32. "default_value": [
  33. [-200, 240],
  34. [-200, -32],
  35. [200, 240],
  36. [200, -32]
  37. ]
  38. },
  39. "machine_heated_bed": { "default_value": true },
  40. "machine_height": { "default_value": 200 },
  41. "machine_name": { "default_value": "MAKEiT Pro-M" },
  42. "machine_start_gcode": { "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nG92 E0 ;zero the extruded length\nG28 ;home\nG1 F200 E30 ;extrude 30 mm of feed stock\nG92 E0 ;zero the extruded length\nG1 E-5 ;retract 5 mm\nG28 SC ;Do homeing, clean nozzles and let printer to know that printing started\nG92 X-6 ;Sets Curas checker board to match printers heated bed coordinates\nG1 F{speed_travel}\nM117 Printing..." },
  43. "machine_use_extruder_offset_to_offset_coords": { "default_value": true },
  44. "machine_width": { "default_value": 200 },
  45. "prime_tower_position_x": { "value": "185" },
  46. "prime_tower_position_y": { "value": "160" },
  47. "print_sequence": { "enabled": false },
  48. "retraction_amount": { "default_value": 6 },
  49. "retraction_speed": { "default_value": 180 },
  50. "speed_print": { "default_value": 60 },
  51. "wall_thickness": { "value": "1.2" }
  52. }
  53. }