ultimaker_s3_bb0.8.inst.cfg 1.4 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546
  1. [general]
  2. definition = ultimaker_s3
  3. name = BB 0.8
  4. version = 4
  5. [metadata]
  6. hardware_type = nozzle
  7. setting_version = 22
  8. type = variant
  9. [values]
  10. acceleration_prime_tower = =math.ceil(acceleration_print * 200 / 3500)
  11. acceleration_support = =math.ceil(acceleration_print * 2000 / 3500)
  12. acceleration_support_bottom = =math.ceil(acceleration_support_interface * 100 / 1500)
  13. acceleration_support_interface = =math.ceil(acceleration_support * 1500 / 2000)
  14. brim_width = 3
  15. cool_fan_speed = 50
  16. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'triangles'
  17. infill_wipe_dist = 0
  18. jerk_print = 25
  19. layer_height = 0.2
  20. machine_min_cool_heat_time_window = 15
  21. machine_nozzle_heat_up_speed = 1.5
  22. machine_nozzle_id = BB 0.8
  23. machine_nozzle_size = 0.8
  24. machine_nozzle_tip_outer_diameter = 2.0
  25. multiple_mesh_overlap = 0
  26. prime_tower_mode = none
  27. prime_tower_wipe_enabled = True
  28. raft_surface_layers = 1
  29. retraction_hop = 2
  30. retraction_hop_only_when_collides = True
  31. speed_prime_tower = =math.ceil(speed_print * 7 / 35)
  32. speed_print = 35
  33. speed_support = =math.ceil(speed_print * 25 / 35)
  34. speed_support_interface = =math.ceil(speed_support * 20 / 25)
  35. speed_wall_0 = =math.ceil(speed_wall * 25 / 30)
  36. support_angle = 60
  37. support_bottom_height = =layer_height * 2
  38. support_interface_enable = True
  39. support_z_distance = 0
  40. switch_extruder_prime_speed = 15
  41. switch_extruder_retraction_amount = 12
  42. top_bottom_thickness = 1
  43. wall_0_inset = 0