ultimaker_s3_aa0.25.inst.cfg 846 B

12345678910111213141516171819202122232425262728293031
  1. [general]
  2. definition = ultimaker_s3
  3. name = AA 0.25
  4. version = 4
  5. [metadata]
  6. hardware_type = nozzle
  7. setting_version = 22
  8. type = variant
  9. [values]
  10. brim_width = 7
  11. cool_min_layer_time = 0
  12. machine_nozzle_cool_down_speed = 0.85
  13. machine_nozzle_heat_up_speed = 1.5
  14. machine_nozzle_id = AA 0.25
  15. machine_nozzle_size = 0.25
  16. machine_nozzle_tip_outer_diameter = 0.65
  17. retraction_prime_speed = =retraction_speed
  18. speed_print = 55
  19. speed_topbottom = 20
  20. speed_wall = =math.ceil(speed_print * 30 / 55)
  21. support_angle = 60
  22. support_bottom_distance = =support_z_distance / 2
  23. support_top_distance = =support_z_distance
  24. support_z_distance = =layer_height * 2
  25. switch_extruder_prime_speed = =switch_extruder_retraction_speeds
  26. switch_extruder_retraction_amount = =machine_heat_zone_length
  27. top_bottom_thickness = 1.2
  28. wall_thickness = =wall_line_width_0 + wall_line_width_x * 2