elegoo_neptune_4.def.json 4.5 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104
  1. {
  2. "version": 2,
  3. "name": "ELEGOO NEPTUNE 4",
  4. "inherits": "elegoo_base",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "mastercaution"
  9. },
  10. "overrides":
  11. {
  12. "acceleration_print":
  13. {
  14. "maximum_value_warning": "20000",
  15. "value": 10000
  16. },
  17. "acceleration_wall": { "value": "acceleration_print/2" },
  18. "cool_fan_full_layer": { "value": 2 },
  19. "infill_line_width": { "value": "line_width + 0.05" },
  20. "infill_overlap": { "value": "0 if infill_sparse_density < 40.01 and infill_pattern != 'concentric' else -5" },
  21. "infill_pattern": { "value": "'lines' if infill_sparse_density > 35 else 'grid'" },
  22. "initial_layer_line_width_factor": { "value": "100.0 if resolveOrValue('adhesion_type') == 'raft' else 125 if line_width < 0.5 else 110" },
  23. "machine_acceleration": { "value": 5000 },
  24. "machine_depth": { "default_value": 230 },
  25. "machine_end_gcode": { "default_value": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z2 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y{machine_depth - 5} ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z" },
  26. "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
  27. "machine_head_with_fans_polygon":
  28. {
  29. "value": [
  30. [-40, 50],
  31. [-40, -30],
  32. [40, 50],
  33. [40, -30]
  34. ]
  35. },
  36. "machine_heated_bed": { "default_value": true },
  37. "machine_height": { "default_value": 270 },
  38. "machine_max_acceleration_e": { "value": 5000 },
  39. "machine_max_acceleration_x": { "value": 20000 },
  40. "machine_max_acceleration_y": { "value": 20000 },
  41. "machine_name": { "default_value": "ELEGOO NEPTUNE 4" },
  42. "machine_nozzle_cool_down_speed": { "value": 0.75 },
  43. "machine_nozzle_heat_up_speed": { "value": 1.6 },
  44. "machine_start_gcode": { "default_value": ";ELEGOO NEPTUNE 4 / 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140 ;Start heating extruder\nM190 S{material_bed_temperature_layer_0} ;Wait for the bed to reach print temp\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S{material_print_temperature_layer_0} ;Wait for extruder to reach print temp\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder" },
  45. "machine_width": { "default_value": 235 },
  46. "retraction_amount": { "default_value": 0.5 },
  47. "retraction_count_max": { "value": 80 },
  48. "retraction_speed": { "default_value": 45 },
  49. "skirt_brim_speed": { "maximum_value_warning": "500" },
  50. "speed_infill":
  51. {
  52. "maximum_value_warning": "500",
  53. "value": "speed_print"
  54. },
  55. "speed_layer_0":
  56. {
  57. "maximum_value_warning": "500",
  58. "value": 60
  59. },
  60. "speed_prime_tower": { "maximum_value_warning": "500" },
  61. "speed_print":
  62. {
  63. "default_value": 250,
  64. "maximum_value_warning": "500"
  65. },
  66. "speed_print_layer_0": { "maximum_value_warning": "500" },
  67. "speed_roofing": { "maximum_value_warning": "500" },
  68. "speed_support": { "maximum_value_warning": "500" },
  69. "speed_support_bottom": { "maximum_value_warning": "500" },
  70. "speed_support_infill": { "maximum_value_warning": "500" },
  71. "speed_support_interface": { "maximum_value_warning": "500" },
  72. "speed_support_roof": { "maximum_value_warning": "500" },
  73. "speed_topbottom":
  74. {
  75. "maximum_value_warning": "500",
  76. "value": "speed_wall"
  77. },
  78. "speed_travel":
  79. {
  80. "maximum_value_warning": "500",
  81. "value": "speed_print"
  82. },
  83. "speed_travel_layer_0":
  84. {
  85. "maximum_value_warning": "500",
  86. "value": "speed_layer_0*2"
  87. },
  88. "speed_wall":
  89. {
  90. "maximum_value_warning": "500",
  91. "value": "speed_print / 2"
  92. },
  93. "speed_wall_0":
  94. {
  95. "maximum_value_warning": "500",
  96. "value": "speed_wall"
  97. },
  98. "speed_wall_x":
  99. {
  100. "maximum_value_warning": "500",
  101. "value": "speed_wall + (speed_wall / 2)"
  102. }
  103. }
  104. }