Cura/resources/quality/xyzprinting/pla/xyzprinting_da_vinci_super_copper_0.40_pla_draft.inst.cfg

[general]
version = 4
name = Draft Quality
definition = xyzprinting_da_vinci_super

[metadata]
setting_version = 20
type = quality
quality_type = draft
weight = -2
material = xyzprinting_pla
variant = Copper 0.4mm Nozzle

[values]
layer_height = 0.3
layer_height_0 = 0.4
material_diameter = 1.75
material_bed_temperature_layer_0 = =material_bed_temperature
material_print_temperature_layer_0 = =material_print_temperature
material_initial_print_temperature = =material_print_temperature
material_final_print_temperature = =material_print_temperature
speed_print = 30
speed_topbottom = 10
speed_wall = =speed_print
speed_infill = =speed_print
speed_support = =speed_print
speed_travel = 120
retraction_amount = 5.5
retraction_speed = 50
skirt_brim_speed = =speed_print
infill_sparse_density = 10