um3_aa0.4_PP_Normal_Quality.inst.cfg 1.7 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758
  1. [general]
  2. version = 4
  3. name = Fine
  4. definition = ultimaker3
  5. [metadata]
  6. setting_version = 20
  7. type = quality
  8. quality_type = normal
  9. weight = 0
  10. material = generic_pp
  11. variant = AA 0.4
  12. [values]
  13. brim_width = 20
  14. cool_fan_speed_max = 100
  15. cool_min_layer_time = 7
  16. cool_min_layer_time_fan_speed_max = 7
  17. cool_min_speed = 2.5
  18. infill_overlap = 0
  19. infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'tetrahedral'
  20. infill_wipe_dist = 0.1
  21. jerk_enabled = True
  22. jerk_print = 25
  23. machine_min_cool_heat_time_window = 15
  24. machine_nozzle_cool_down_speed = 0.85
  25. machine_nozzle_heat_up_speed = 1.5
  26. material_bed_temperature_layer_0 = =material_bed_temperature + 5
  27. material_final_print_temperature = =material_print_temperature - 10
  28. material_initial_print_temperature = =material_print_temperature - 5
  29. material_print_temperature = =default_material_print_temperature - 15
  30. material_print_temperature_layer_0 = =material_print_temperature + 3
  31. material_standby_temperature = 100
  32. multiple_mesh_overlap = 0
  33. prime_tower_enable = False
  34. prime_tower_size = 16
  35. prime_tower_wipe_enabled = True
  36. retraction_count_max = 12
  37. retraction_extra_prime_amount = 0.8
  38. retraction_extrusion_window = 1
  39. retraction_hop = 2
  40. retraction_hop_only_when_collides = True
  41. retraction_min_travel = 0.8
  42. retraction_prime_speed = 18
  43. speed_layer_0 = =math.ceil(speed_print * 15 / 25)
  44. speed_print = 25
  45. speed_topbottom = =math.ceil(speed_print * 25 / 25)
  46. speed_travel = 300
  47. speed_travel_layer_0 = 50
  48. speed_wall = =math.ceil(speed_print * 25 / 25)
  49. speed_wall_0 = =math.ceil(speed_wall * 25 / 25)
  50. support_angle = 50
  51. switch_extruder_prime_speed = 15
  52. switch_extruder_retraction_amount = 20
  53. switch_extruder_retraction_speeds = 35
  54. top_bottom_thickness = 1
  55. wall_0_inset = 0