eryone_thinker.def.json 7.3 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253
  1. {
  2. "version": 2,
  3. "name": "Eryone Thinker Series",
  4. "inherits": "fdmprinter",
  5. "metadata":
  6. {
  7. "visible": true,
  8. "author": "Demetrius Apostolopoulos",
  9. "manufacturer": "Eryone",
  10. "file_formats": "text/x-gcode",
  11. "platform": "eryone_thinker_platform.obj",
  12. "platform_texture": "eryone_thinker_plate.png",
  13. "platform_offset": [0, -120, 0],
  14. "has_materials": true,
  15. "preferred_material": "generic_pla",
  16. "has_machine_quality": true,
  17. "preferred_quality_type": "normal",
  18. "machine_extruder_trains":
  19. {
  20. "0": "eryone_thinker_extruder_0"
  21. },
  22. "first_start_actions": ["MachineSettingsAction"]
  23. },
  24. "overrides":
  25. {
  26. "machine_name": {
  27. "default_value": "Eryone Thinker Series"
  28. },
  29. "machine_heated_bed": {
  30. "default_value": true
  31. },
  32. "machine_width": {
  33. "default_value": 300
  34. },
  35. "machine_height": {
  36. "default_value": 400
  37. },
  38. "machine_depth": {
  39. "default_value": 300
  40. },
  41. "machine_center_is_zero": {
  42. "default_value": false
  43. },
  44. "machine_head_with_fans_polygon": {
  45. "default_value": [
  46. [-20, 30],
  47. [-20, -20],
  48. [20, -20],
  49. [20, 30]
  50. ]
  51. },
  52. "gantry_height": {
  53. "value": 30
  54. },
  55. "machine_gcode_flavor": {
  56. "default_value": "Marlin"
  57. },
  58. "machine_start_gcode": {
  59. "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z10.0 F600 ;move the platform down 10mm\nG92 E0 ;zero the extruded length\nG1 F200 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 Y-3 F1200 ;move to prime\nG1 X10 F1200 ;\nG1 Z0.1 F600 ;get ready to prime\nG1 X120 E15 F1200 ;prime nozzle \nG1 X120 F3600 ;quick wipe\nG92 E0 ;zero the extruded length\nG5 ;enable resume from power failure\nM117 Printing..."
  60. },
  61. "machine_end_gcode": {
  62. "default_value": "M104 S0 ;turn off extruder\nM140 S0 ;turn off bed\nM107 ;turn off all fans\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 E-5 F300\nG1 Z+0.5 E-5 ;move Z up a bit and retract filament even more\nG90 ;absolute positioning\nG1 X0 Y250 F4800 ; position for easy part removal\nM84 ;steppers off"
  63. },
  64. "acceleration_enabled": {
  65. "value": true
  66. },
  67. "acceleration_print": {
  68. "value": 750
  69. },
  70. "acceleration_travel": {
  71. "value": 1500
  72. },
  73. "adhesion_type": {
  74. "value": "'skirt'"
  75. },
  76. "brim_width": {
  77. "value": 5
  78. },
  79. "cool_fan_full_at_height": {
  80. "value": 0.5
  81. },
  82. "cool_fan_speed": {
  83. "value": 100
  84. },
  85. "cool_fan_speed_0": {
  86. "value": 0
  87. },
  88. "infill_overlap": {
  89. "value": "25 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0",
  90. "maximum_value_warning": 100,
  91. "minimum_value_warning": -50
  92. },
  93. "infill_pattern": {
  94. "value": "'lines' if infill_sparse_density > 25 else 'grid'"
  95. },
  96. "infill_sparse_density": {
  97. "value": 20
  98. },
  99. "initial_layer_line_width_factor": {
  100. "value": 120
  101. },
  102. "infill_before_walls": {
  103. "value": false
  104. },
  105. "jerk_enabled": {
  106. "value": true
  107. },
  108. "jerk_print": {
  109. "value": 10
  110. },
  111. "jerk_travel": {
  112. "value": 15
  113. },
  114. "material_bed_temperature": {
  115. "maximum_value_warning": 100
  116. },
  117. "material_print_temperature": {
  118. "maximum_value_warning": 250
  119. },
  120. "optimize_wall_printing_order": {
  121. "default_value": true
  122. },
  123. "outer_inset_first": {
  124. "default_value": false
  125. },
  126. "retract_at_layer_change": {
  127. "value": true
  128. },
  129. "retraction_amount": {
  130. "default_value": 4
  131. },
  132. "retraction_hop": {
  133. "value": 0.075
  134. },
  135. "retraction_hop_enabled": {
  136. "value": false
  137. },
  138. "retraction_hop_only_when_collides": {
  139. "value": true
  140. },
  141. "retraction_min_travel": {
  142. "value": 1.5
  143. },
  144. "retraction_speed": {
  145. "default_value": 85,
  146. "maximum_value_warning": 100
  147. },
  148. "retraction_retract_speed": {
  149. "maximum_value_warning": 130
  150. },
  151. "retraction_prime_speed": {
  152. "value": "math.ceil(retraction_speed * 0.4)",
  153. "maximum_value_warning": 130
  154. },
  155. "retraction_combing": {
  156. "value": "'off' if retraction_hop_enabled else 'noskin'"
  157. },
  158. "skin_overlap": {
  159. "value": 10
  160. },
  161. "skirt_brim_speed": {
  162. "value": 40
  163. },
  164. "skirt_gap": {
  165. "value": 5
  166. },
  167. "skirt_line_count": {
  168. "value": 3
  169. },
  170. "speed_infill": {
  171. "value": "speed_print"
  172. },
  173. "speed_topbottom": {
  174. "value": "math.ceil(speed_print * 20 / 50)"
  175. },
  176. "speed_travel": {
  177. "value": "120"
  178. },
  179. "speed_layer_0": {
  180. "value": "math.ceil(speed_print * 30 / 50)"
  181. },
  182. "speed_wall": {
  183. "value": "speed_print"
  184. },
  185. "speed_wall_0": {
  186. "value": "math.ceil(speed_print * 30 / 50)"
  187. },
  188. "speed_wall_x": {
  189. "value": "speed_print"
  190. },
  191. "support_angle": {
  192. "value": 50
  193. },
  194. "support_enable": {
  195. "default_value": false
  196. },
  197. "support_interface_enable": {
  198. "value": true
  199. },
  200. "support_pattern": {
  201. "value": "'triangles'"
  202. },
  203. "support_roof_enable": {
  204. "value": true
  205. },
  206. "support_type": {
  207. "value": "'everywhere'"
  208. },
  209. "support_use_towers": {
  210. "value": false
  211. },
  212. "support_z_distance": {
  213. "value": 0.3
  214. },
  215. "support_xy_distance": {
  216. "value": 0.7
  217. },
  218. "support_xy_distance_overhang": {
  219. "value": 0.2
  220. },
  221. "smooth_spiralized_contours": {
  222. "value": false
  223. },
  224. "travel_retract_before_outer_wall": {
  225. "value": true
  226. },
  227. "wall_line_count": {
  228. "value": 3
  229. },
  230. "wall_thickness": {
  231. "value": "1.2"
  232. },
  233. "bottom_layers": {
  234. "value": "4"
  235. },
  236. "bottom_thickness":{
  237. "value": "layer_height * bottom_layers"
  238. },
  239. "top_layers": {
  240. "value": "6"
  241. },
  242. "top_thickness":{
  243. "value": "layer_height * top_layers"
  244. },
  245. "z_seam_type": {
  246. "value": "'shortest'"
  247. },
  248. "z_seam_corner": {
  249. "value": "'z_seam_corner_inner'"
  250. }
  251. }
  252. }