easyarts_ares.def.json 2.2 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859
  1. {
  2. "name": "EasyArts Ares",
  3. "version": 2,
  4. "inherits": "fdmprinter",
  5. "metadata": {
  6. "visible": true,
  7. "author": "nliaudat",
  8. "manufacturer": "EasyArts",
  9. "file_formats": "text/x-gcode",
  10. "machine_extruder_trains":
  11. {
  12. "0": "easyarts_ares_extruder_0"
  13. }
  14. },
  15. "overrides": {
  16. "machine_start_gcode": {
  17. "default_value": "; -- START GCODE --\nG21 ;metric values\nG90 ;absolute positioning\nM82 ;set extruder to absolute mode\nM107 ;start with the fan off\nG28 \nG29 Z0.12 ;Auto-bedleveling with Z offset \nG92 E0 ;zero the extruded length \nG1 F2000 E3 ;extrude 3mm of feed stock\nG92 E0 ;zero the extruded length again\nG1 F{speed_travel}\nM117 Printing...\n; -- end of START GCODE --"
  18. },
  19. "machine_end_gcode": {
  20. "default_value": "; -- START GCODE --\nG28 ; Home all axes\nM104 S0 ;extruder heater off\n;M140 S0 ;heated bed heater off (if you have it)\nG91 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\n;M84 ;steppers off\nG90 ;absolute positioning\n; -- end of START GCODE --"
  21. },
  22. "machine_width": {
  23. "default_value": 180
  24. },
  25. "machine_depth": {
  26. "default_value": 180
  27. },
  28. "machine_height": {
  29. "default_value": 200
  30. },
  31. "machine_heated_bed": {
  32. "default_value": false
  33. },
  34. "machine_center_is_zero": {
  35. "default_value": true
  36. },
  37. "machine_gcode_flavor": {
  38. "default_value": "RepRap"
  39. },
  40. "layer_height": {
  41. "default_value": 0.2
  42. },
  43. "layer_height_0": {
  44. "default_value": 0.2
  45. },
  46. "wall_thickness": {
  47. "value": "1"
  48. },
  49. "top_bottom_thickness": {
  50. "default_value": 1
  51. },
  52. "speed_print": {
  53. "default_value": 75
  54. },
  55. "support_enable": {
  56. "default_value": true
  57. }
  58. }
  59. }