biqu_b1_abl.def.json 2.5 KB

1234567891011121314151617181920212223242526272829303132333435363738394041424344
  1. {
  2. "name": "Biqu B1 ABL",
  3. "version": 2,
  4. "inherits": "biqu_base",
  5. "metadata": {
  6. "quality_definition": "biqu_base",
  7. "visible": true,
  8. "has_machine_materials": true,
  9. "platform": "BIQU_SSS.stl",
  10. "platform_offset": [
  11. 0,
  12. -7.4,
  13. 5
  14. ]
  15. },
  16. "overrides": {
  17. "coasting_enable": { "value": true },
  18. "retraction_amount": { "value": 7 },
  19. "retraction_speed": { "value": 70 },
  20. "support_enable": { "value": true },
  21. "support_structure": { "value": "'normal'" },
  22. "support_type": { "value": "'buildplate'" },
  23. "support_angle": { "value": 45 },
  24. "support_infill_rate": { "value": 15 },
  25. "infill_overlap_mm": { "value": 0.06 },
  26. "speed_print": { "value": 60 },
  27. "machine_name": { "default_value": "BIQU B1 ABL" },
  28. "machine_width": { "value": 235 },
  29. "machine_depth": { "value": 235 },
  30. "machine_height": { "value": 270 },
  31. "machine_head_with_fans_polygon": { "default_value": [
  32. [-33, 35],
  33. [-33, -23],
  34. [33, -23],
  35. [33, 35]
  36. ]
  37. },
  38. "machine_start_gcode": {
  39. "default_value": "; BIQU B1 Start G-code\nM117 Getting the bed up to temp!\nM140 S{material_bed_temperature_layer_0} ; Set Heat Bed temperature\nM190 S{material_bed_temperature_layer_0} ; Wait for Heat Bed temperature\nM117 Pre-heating the extruder\nM104 S160 ; Set Extruder temperature\nM117 Homing axes\nG28 ; Home all axes\nM117 ABL Probing\nG29\nM117 Getting the extruder up to temp\nM104 S{material_print_temperature_layer_0} ; Set Extruder temperature\nM109 S{material_print_temperature_layer_0} ; Wait for Extruder temperature\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X4.1 Y20 Z0.3 F5000.0 ; Move to start position\nM117 Purging\nG1 X4.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X4.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X4.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM117 Lets make\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X5 Y20 Z0.3 F5000.0 ; Move over to prevent blob squish"
  40. },
  41. "gantry_height": { "value": 27.5 }
  42. }
  43. }