Cura/resources/definitions/ankermake_m5.def.json

{
    "version": 2,
    "name": "AnkerMake M5",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "just-trey",
        "manufacturer": "AnkerMake",
        "file_formats": "text/x-gcode",
        "platform": "ankermake_m5_platform.obj",
        "has_machine_quality": true,
        "machine_extruder_trains": { "0": "ankermake_m5_extruder_0" },
        "platform_texture": "ankermake_m5.png",
        "preferred_material": "generic_pla",
        "preferred_quality_type": "normal"
    },
    "overrides":
    {
        "acceleration_enabled": { "value": "True" },
        "acceleration_infill": { "maximum_value_warning": "2500" },
        "acceleration_layer_0": { "maximum_value_warning": "2500" },
        "acceleration_prime_tower": { "maximum_value_warning": "2500" },
        "acceleration_print":
        {
            "maximum_value_warning": "2500",
            "value": "2500"
        },
        "acceleration_print_layer_0": { "maximum_value_warning": "2500" },
        "acceleration_roofing": { "maximum_value_warning": "2500" },
        "acceleration_skirt_brim": { "maximum_value_warning": "2500" },
        "acceleration_support": { "maximum_value_warning": "2500" },
        "acceleration_support_bottom": { "maximum_value_warning": "2500" },
        "acceleration_support_infill": { "maximum_value_warning": "2500" },
        "acceleration_support_interface": { "maximum_value_warning": "2500" },
        "acceleration_support_roof": { "maximum_value_warning": "2500" },
        "acceleration_topbottom": { "maximum_value_warning": "2500" },
        "acceleration_travel":
        {
            "maximum_value_warning": "2500",
            "value": "acceleration_print"
        },
        "acceleration_travel_layer_0":
        {
            "maximum_value_warning": "2500",
            "value": "acceleration_travel"
        },
        "acceleration_wall": { "maximum_value_warning": "2500" },
        "acceleration_wall_0": { "maximum_value_warning": "2500" },
        "acceleration_wall_x": { "maximum_value_warning": "2500" },
        "adhesion_type": { "default_value": "skirt" },
        "cool_min_layer_time": { "value": 6 },
        "cool_min_speed": { "value": 30 },
        "gantry_height": { "value": 25 },
        "hole_xy_offset": { "value": 0.2 },
        "infill_pattern": { "value": "'lines' if infill_sparse_density >= 25 else 'grid'" },
        "infill_sparse_density": { "value": 25 },
        "machine_depth": { "default_value": 235 },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 250 },
        "machine_name": { "default_value": "AnkerMake M5" },
        "machine_start_gcode": { "default_value": "M104 S{material_print_temperature_layer_0} ; set final nozzle temp\nM190 S{material_bed_temperature_layer_0} ; set and wait for nozzle temp to stabilize\nM109 S{material_print_temperature_layer_0} ; wait for nozzle temp to stabilize\nG28 ;Home\nG1 E10 F3600; push out retracted filament(fix for over retraction after prime)" },
        "machine_width": { "default_value": 235 },
        "material_bed_temperature": { "maximum_value_warning": "110" },
        "material_bed_temperature_layer_0": { "maximum_value_warning": "110" },
        "material_diameter": { "default_value": 1.75 },
        "material_final_print_temperature": { "value": "material_print_temperature" },
        "material_flow_layer_0": { "value": 115 },
        "material_initial_print_temperature": { "value": "material_print_temperature" },
        "material_print_temperature": { "maximum_value_warning": "260" },
        "material_print_temperature_layer_0":
        {
            "maximum_value_warning": "270",
            "value": "material_print_temperature + 5"
        },
        "minimum_interface_area": { "value": 10 },
        "minimum_support_area": { "value": "2 if support_structure == 'normal' else 0" },
        "retraction_amount": { "default_value": 1.5 },
        "retraction_combing": { "value": "'off' if retraction_hop_enabled else 'infill'" },
        "retraction_hop": { "value": 0.2 },
        "retraction_speed": { "default_value": 60 },
        "skin_material_flow": { "value": 97 },
        "skin_monotonic": { "default_value": true },
        "skirt_line_count": { "value": 3 },
        "small_hole_max_size": { "value": 10 },
        "speed_infill": { "maximum_value_warning": 255 },
        "speed_print":
        {
            "maximum_value_warning": 255,
            "value": 250.0
        },
        "speed_support": { "maximum_value_warning": 255 },
        "speed_support_bottom": { "maximum_value_warning": 255 },
        "speed_support_infill": { "maximum_value_warning": 255 },
        "speed_support_interface": { "maximum_value_warning": 255 },
        "speed_support_roof": { "maximum_value_warning": 255 },
        "speed_topbottom": { "value": 150.0 },
        "speed_travel": { "value": 250.0 },
        "speed_wall":
        {
            "maximum_value_warning": 255,
            "value": 150.0
        },
        "speed_wall_x":
        {
            "maximum_value_warning": 255,
            "value": 250.0
        },
        "support_angle": { "value": "math.floor(math.degrees(math.atan(line_width / 2.0 /layer_height)))" },
        "support_brim_width": { "value": 4.0 },
        "support_infill_rate": { "value": "0 if support_enable and support_structure == 'tree' else 20" },
        "support_interface_density": { "value": 33.333 },
        "support_interface_enable": { "value": true },
        "support_interface_pattern": { "value": "'grid'" },
        "support_interface_skip_height": { "value": 0.2 },
        "support_roof_enable": { "value": true },
        "support_xy_distance": { "value": "wall_line_width_0 * 2" },
        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
        "support_xy_overrides_z": { "value": "'xy_overrides_z'" },
        "support_z_distance": { "value": "layer_height * 2" },
        "top_bottom_thickness": { "value": "layer_height * 4" },
        "wall_overhang_angle": { "value": 55 },
        "wall_overhang_speed_factor": { "value": 55 },
        "zig_zaggify_infill": { "value": "infill_pattern == 'cross' or infill_pattern == 'cross_3d' or infill_pattern == 'lines'" }
    }
}