Cura/resources/quality/ultimaker_methodxl/um_methodxl_labs_um-petg-175_0.2mm.inst.cfg

[general]
definition = ultimaker_methodxl
name = Fast
version = 4

[metadata]
material = ultimaker_petg_175
quality_type = draft
setting_version = 24
type = quality
variant = LABS
weight = -2

[values]
cool_fan_enabled = True
cool_fan_speed = 50
cool_fan_speed_0 = 0
cool_fan_speed_max = 100
cool_min_layer_time = 10
cool_min_speed = 5
initial_layer_line_width_factor = 150
min_bead_width = =line_width * 0.75
min_wall_line_width = =line_width * 0.75
raft_airgap = 0.2
raft_base_infill_overlap = 10
raft_base_line_spacing = =4 if extruder_nr == raft_interface_extruder_nr else 2.8
raft_base_line_width = =1.2 if extruder_nr == raft_interface_extruder_nr else 1.4
raft_base_thickness = 0.6
raft_interface_infill_overlap = 35
raft_interface_line_spacing = 0.75
raft_interface_speed = 40
raft_speed = 15
raft_surface_infill_overlap = 25
raft_surface_line_spacing = 0.425
raft_surface_line_width = 0.4
raft_surface_speed = 40
skin_overlap = 10
speed_layer_0 = 15
speed_print = 60
speed_roofing = =speed_print / 3
speed_support = =speed_print
speed_support_interface = 40
speed_topbottom = =speed_print * 0.6
speed_wall = =speed_print / 6
speed_wall_0 = =speed_wall
speed_wall_x = =speed_wall
support_angle = 50.0
support_bottom_distance = =layer_height
support_bottom_enable = False
support_infill_angles = [45 ]
support_infill_rate = 12
support_interface_density = 83
support_interface_height = =layer_height * 4
support_interface_material_flow = =material_flow
support_line_width = =line_width * 0.75
support_material_flow = =material_flow
support_offset = 3
support_roof_density = =support_interface_density
support_roof_line_width = =line_width
support_supported_skin_fan_speed = =cool_fan_speed if support_wall_count > 0 else cool_fan_speed_max
support_top_distance = =support_z_distance
support_xy_distance = 0.3
support_xy_overrides_z = xy_overrides_z
support_z_distance = 0.2
switch_extruder_retraction_amount = 1