| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119 |
- [general]
- definition = key3d_tyro
- name = Best Quality
- version = 4
- [metadata]
- global_quality = True
- quality_type = best
- setting_version = 24
- type = quality
- weight = 1
- [values]
- acceleration_enabled = False
- acceleration_roofing = 3000
- adhesion_type = skirt
- alternate_extra_perimeter = False
- bottom_layers = 3
- bottom_thickness = 0.6
- build_volume_temperature = 0
- carve_multiple_volumes = False
- cool_fan_enabled = True
- cool_fan_full_at_height = 0.24
- cool_fan_speed = 100
- cool_fan_speed_0 = 0
- cool_lift_head = False
- default_material_bed_temperature = 0
- default_material_print_temperature = 220
- fill_outline_gaps = True
- gradual_infill_steps = 0
- gradual_support_infill_steps = 0
- infill_before_walls = False
- infill_multiplier = 1
- infill_overlap = 10
- infill_sparse_density = 20
- infill_support_enabled = False
- infill_wall_line_count = 0
- infill_wipe_dist = 0.1
- initial_layer_line_width_factor = 100
- ironing_enabled = False
- jerk_enabled = False
- layer_height = 0.08
- layer_height_0 = 0.24
- line_width = 0.4
- material_bed_temperature = 0
- material_final_print_temperature = 220
- material_flow = 100
- material_initial_print_temperature = 220
- material_print_temperature = 220
- material_print_temperature_layer_0 = 220
- max_skin_angle_for_expansion = 90
- meshfix_extensive_stitching = False
- meshfix_keep_open_polygons = False
- meshfix_union_all = True
- meshfix_union_all_remove_holes = False
- multiple_mesh_overlap = 0.16
- optimize_wall_printing_order = False
- retract_at_layer_change = False
- retraction_amount = 5
- retraction_combing = off
- retraction_count_max = 90
- retraction_enable = True
- retraction_extra_prime_amount = 0
- retraction_extrusion_window = 5
- retraction_hop_enabled = False
- retraction_min_travel = 0.8
- retraction_speed = 45
- roofing_layer_count = 1
- skin_no_small_gaps_heuristic = True
- skin_outline_count = 1
- skin_overlap = 5
- skirt_gap = 3
- skirt_line_count = 2
- speed_layer_0 = 10
- speed_print = 30
- speed_slowdown_layers = 2
- speed_travel = 150
- speed_travel_layer_0 = 50
- support_angle = 50
- support_bottom_enable = False
- support_bottom_stair_step_height = 0.3
- support_bottom_stair_step_width = 5.0
- support_brim_enable = True
- support_brim_line_count = 5
- support_enable = True
- support_fan_enable = False
- support_infill_angles = [0]
- support_infill_rate = =20 if support_enable and support_structure == 'normal' else 0 if support_enable and support_structure == 'tree' else 20
- support_join_distance = 2.0
- support_offset = 0.2
- support_pattern = grid
- support_roof_density = 45
- support_roof_enable = True
- support_roof_height = 0.45
- support_roof_pattern = lines
- support_tower_diameter = 3
- support_tower_roof_angle = 65
- support_type = everywhere
- support_use_towers = True
- support_wall_count = 0
- support_xy_distance = 0.7
- support_xy_distance_overhang = 0.2
- support_z_distance = 0.2
- switch_extruder_retraction_amount = 16
- switch_extruder_retraction_speeds = 20
- top_bottom_pattern = lines
- top_bottom_pattern_0 = lines
- top_bottom_thickness = 0.6
- top_layers = 5
- top_thickness = 0.8
- travel_retract_before_outer_wall = False
- wall_0_inset = 0
- wall_0_wipe_dist = 0.2
- wall_line_width_0 = 0.4
- wall_thickness = 0.8
- xy_offset = 0
- zig_zaggify_infill = False
- zig_zaggify_support = False
|
