| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394 |
- [general]
- definition = ankermake_m5c
- name = Normal
- version = 4
- [metadata]
- global_quality = True
- quality_type = normal
- setting_version = 24
- type = quality
- weight = 0
- [values]
- acceleration_infill = 2500
- acceleration_layer_0 = 2500
- acceleration_prime_tower = 2500
- acceleration_print = 2500
- acceleration_print_layer_0 = 2500
- acceleration_roofing = 2500
- acceleration_skirt_brim = 2500
- acceleration_support = 2500
- acceleration_support_bottom = 2500
- acceleration_support_infill = 2500
- acceleration_support_interface = 2500
- acceleration_support_roof = 2500
- acceleration_topbottom = 2500
- acceleration_travel = 2500
- acceleration_travel_layer_0 = 2500
- acceleration_wall = 2500
- acceleration_wall_0 = 2500
- acceleration_wall_x = 2500
- bottom_layers = 4
- infill_line_width = 0.40
- initial_layer_line_width_factor = 100
- jerk_enabled = true
- jerk_infill = 10
- jerk_layer_0 = 10
- jerk_prime_tower = 10
- jerk_print = 10
- jerk_print_layer_0 = 10
- jerk_roofing = 10
- jerk_skirt_brim = 10
- jerk_support = 10
- jerk_support_bottom = 10
- jerk_support_infill = 10
- jerk_support_interface = 10
- jerk_support_roof = 10
- jerk_topbottom = 10
- jerk_travel = 10
- jerk_travel_layer_0 = 10
- jerk_wall = 10
- jerk_wall_0 = 8
- jerk_wall_x = 8
- layer_height = 0.2
- layer_height_0 = 0.14
- line_width = 0.40
- min_wall_line_width = 0.10
- prime_tower_line_width = 0.40
- skin_line_width = 0.40
- skirt_brim_line_width = 0.40
- skirt_brim_speed = 50
- speed_infill = 250
- speed_layer_0 = 50
- speed_prime_tower = 250
- speed_print = 250
- speed_print_layer_0 = 50
- speed_roofing = 150
- speed_support = 150
- speed_support_bottom = 100
- speed_support_infill = 150
- speed_support_interface = 100
- speed_support_roof = 100
- speed_topbottom = 150
- speed_travel = 250
- speed_travel_layer_0 = 50
- speed_wall = 150
- speed_wall_0 = 150
- speed_wall_x = 250
- support_bottom_line_width = 0.40
- support_interface_line_width = 0.40
- support_line_width = 0.40
- support_roof_line_width = 0.40
- top_layers = 4
- wall_0_extruder_nr = -1
- wall_0_inset = 0
- wall_0_wipe_dist = 0.20
- wall_extruder_nr = -1
- wall_line_count = 3
- wall_line_width = 0.40
- wall_line_width_0 = 0.44
- wall_line_width_x = 0.40
- wall_thickness = 1.24
- wall_x_extruder_nr = -1
|
