Cura/resources/definitions/zyyx_pro.def.json

{
    "version": 2,
    "name": "ZYYX Pro",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Theodor Hansson",
        "manufacturer": "ZYYX Labs AB",
        "file_formats": "application/x3g",
        "platform": "zyyx_pro_platform.stl",
        "exclude_materials": [
            "3D-Fuel_PLA_PRO_Black",
            "3D-Fuel_PLA_SnapSupport",
            "bestfilament_abs_skyblue",
            "bestfilament_petg_orange",
            "bestfilament_pla_green",
            "leapfrog_abs_natural",
            "leapfrog_epla_natural",
            "leapfrog_pva_natural",
            "goofoo_abs",
            "goofoo_asa",
            "goofoo_bronze_pla",
            "goofoo_emarble_pla",
            "goofoo_esilk_pla",
            "goofoo_hips",
            "goofoo_pa_cf",
            "goofoo_pa",
            "goofoo_pc",
            "goofoo_peek",
            "goofoo_petg",
            "goofoo_pla",
            "goofoo_pva",
            "goofoo_tpe_83a",
            "goofoo_tpu_87a",
            "goofoo_tpu_95a",
            "emotiontech_abs",
            "emotiontech_absx",
            "emotiontech_acetate",
            "emotiontech_asax",
            "emotiontech_bvoh",
            "emotiontech_copa",
            "emotiontech_hips",
            "emotiontech_nylon_1030",
            "emotiontech_nylon_1030cf",
            "emotiontech_nylon_1070",
            "emotiontech_pa6cf",
            "emotiontech_pa6gf",
            "emotiontech_pc",
            "emotiontech_pekk",
            "emotiontech_petg",
            "emotiontech_pla",
            "emotiontech_pla_hr_870",
            "emotiontech_pva-m",
            "emotiontech_pva-s",
            "emotiontech_tpu98a",
            "eryone_petg",
            "eryone_pla_matte",
            "eryone_pla",
            "eryone_tpu",
            "eSUN_PETG_Black",
            "eSUN_PETG_Grey",
            "eSUN_PETG_Purple",
            "eSUN_PLA_PRO_Black",
            "eSUN_PLA_PRO_Grey",
            "eSUN_PLA_PRO_Purple",
            "eSUN_PLA_PRO_White",
            "Extrudr_GreenTECPro_Anthracite_175",
            "Extrudr_GreenTECPro_Black_175",
            "Extrudr_GreenTECPro_Blue_175",
            "Extrudr_GreenTECPro_Nature_175",
            "Extrudr_GreenTECPro_Red_175",
            "Extrudr_GreenTECPro_Silver_175",
            "Extrudr_GreenTECPro_White_175",
            "verbatim_bvoh_175",
            "Vertex_Delta_ABS",
            "Vertex_Delta_PET",
            "Vertex_Delta_PLA",
            "Vertex_Delta_TPU",
            "chromatik_pla",
            "dsm_arnitel2045_175",
            "dsm_novamid1070_175",
            "fabtotum_abs",
            "fabtotum_nylon",
            "fabtotum_pla",
            "fabtotum_tpu",
            "fdplast_abs_tomato",
            "fdplast_petg_gray",
            "fdplast_pla_olive",
            "fiberlogy_hd_pla",
            "filo3d_pla",
            "filo3d_pla_green",
            "filo3d_pla_red",
            "ideagen3D_ToughPLA",
            "imade3d_petg_green",
            "imade3d_petg_pink",
            "imade3d_pla_green",
            "imade3d_pla_pink",
            "imade3d_petg_175",
            "imade3d_pla_175",
            "innofill_innoflex60_175",
            "layer_one_black_pla",
            "layer_one_dark_gray_pla",
            "layer_one_white_pla",
            "octofiber_pla",
            "polyflex_pla",
            "polymax_pla",
            "polyplus_pla",
            "polywood_pla",
            "redd_abs",
            "redd_asa",
            "redd_hips",
            "redd_nylon",
            "redd_petg",
            "redd_pla",
            "redd_tpe",
            "tizyx_abs",
            "tizyx_flex",
            "tizyx_petg",
            "tizyx_pla_bois",
            "tizyx_pla",
            "tizyx_pva",
            "ultimaker_abscf_175",
            "ultimaker_absr_175",
            "ultimaker_asa_175",
            "ultimaker_nylon12-cf_175",
            "ultimaker_pla_175",
            "ultimaker_pva_175",
            "ultimaker_rapidrinse_175",
            "ultimaker_sr30_175",
            "ultimaker_tough_pla_175",
            "Vertex_Delta_ABS",
            "Vertex_Delta_PET",
            "Vertex_Delta_PLA_Glitter",
            "Vertex_Delta_PLA_Mat",
            "Vertex_Delta_PLA_Satin",
            "Vertex_Delta_PLA_Wood",
            "Vertex_Delta_PLA",
            "Vertex_Delta_TPU",
            "volumic_abs_ultra",
            "volumic_arma_ultra",
            "volumic_asa_ultra",
            "volumic_br80_ultra",
            "volumic_bumper_ultra",
            "volumic_cu80_ultra",
            "volumic_flex93_ultra",
            "volumic_medical_ultra",
            "volumic_nylon_ultra",
            "volumic_pekk_carbone",
            "volumic_petg_ultra",
            "volumic_petgcarbone_ultra",
            "volumic_pla_ultra",
            "volumic_pp_ultra",
            "volumic_strong_ultra",
            "volumic_support_ultra",
            "xyzprinting_abs",
            "xyzprinting_antibact_pla",
            "xyzprinting_carbon_fiber",
            "xyzprinting_colorinkjet_pla",
            "xyzprinting_flexible",
            "xyzprinting_metallic_pla",
            "xyzprinting_nylon",
            "xyzprinting_pahtcf15",
            "xyzprinting_pc",
            "xyzprinting_petcf15",
            "xyzprinting_petg",
            "xyzprinting_pla",
            "xyzprinting_ppgf30",
            "xyzprinting_tough_pla",
            "xyzprinting_tpu",
            "zyyx_abs-mm",
            "zyyx_abs-perf",
            "zyyx_flex95a",
            "zyyx_petg",
            "zyyx_pla",
            "zyyx_pro_flex",
            "zyyx_pro_pla",
            "zyyx_pronylon"
        ],
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine": "zyyx_pro",
        "machine_extruder_trains": { "0": "zyyx_pro_extruder" },
        "machine_x3g_variant": "z",
        "preferred_material": "generic_pla",
        "preferred_variant_name": "Carbon0.6",
        "quality_definition": "zyyx_pro",
        "setting_version": 3,
        "variants_name": "SwiftTool"
    },
    "overrides":
    {
        "gantry_height": { "value": "10" },
        "infill_overlap": { "value": "12 if infill_sparse_density < 95 and infill_pattern != 'concentric' else 0" },
        "machine_center_is_zero": { "default_value": true },
        "machine_depth": { "default_value": 228 },
        "machine_disallowed_areas":
        {
            "default_value": [
                [
                    [-58, 117.5],
                    [-58, 108],
                    [-50, 108],
                    [-50, 117.5]
                ],
                [
                    [119, 117.5],
                    [119, 108],
                    [140, 108],
                    [140, 117.5]
                ],
                [
                    [-58, -117.5],
                    [-58, -108],
                    [-50, -108],
                    [-50, -117.5]
                ],
                [
                    [119, -117.5],
                    [119, -108],
                    [140, -108],
                    [140, -117.5]
                ]
            ]
        },
        "machine_end_gcode": { "default_value": "; ZYYX 3D Printer end gcode\nM73 P100 ; end build progress\nG0 Z195 F1000 ; send Z axis to bottom of machine\nM104 S0 T0 ; cool down extruder\nM127 ; stop blower fan\nG162 X Y F3000 ; home XY maximum\nM18 ; disable stepper\nM70 P5 (ZYYX Print Finished!)\nM72 P1 ; play Ta-Da song\n" },
        "machine_gcode_flavor": { "default_value": "Makerbot" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-37, 50],
                [25, 50],
                [25, -40],
                [-37, -40]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_height": { "default_value": 195 },
        "machine_name": { "default_value": "ZYYX Pro" },
        "machine_start_gcode": { "default_value": "; ZYYX Pro start gcode\n; Author Theodor Hansson 2024\nM73 P0; enable build progress\nM420 P20; set back fan speed 10 off 11-20 10-100%\nM140 S10 T0; set 100% heater power\nM140 S99 T0; set chamber heater negative hysteresis 19 degrees\nM140 S102 T0; set chamber heater positive hysteresis 2 degrees\nM140 S{material_bed_temperature_layer_0} T0; set chamber temperature\nM104 S{material_print_temperature_layer_0} T0; set nozzle temperature\nG21; set units to mm\nG90; set positioning to absolute\nG130 X80 Y90 A127 B127 ; Set Stepper Vref to default value\n\n; Home xy-axis\nG162 X Y F2500; home XY axes maximum\nG92 X0 Y0\nG1 X-5 Y-5 F2500\nG162 X Y F200; home XY axes maximum slowly\nG92 X135 Y114\n\n; Home z-axis\nG161 Z F1100; home Z axis minimum\nG92 Z0\nG1 Z2 F1100\nG161 Z F100; home Z axis minimum slowly\nG92 Z0\nM132 Z; Recall home offsets for Z\n\n; Calibrate point 1 (we're already at point 1)\nM131 A; store surface calibration point 1\nG1 Z2 F1100; back up from buildplate\n\n; Calibrate point 2\nG1 X-47 F7000; move to 2nd probing point\nG161 Z F100\nM131 B; store surface calibration point 1\nG1 Z2 F1100; back up from buildplate\n\n; Calibrate point 3\nG1 X135 Y-114 F7000; move to 2nd probing point\nG161 Z F100\nM131 AB; store surface calibration point 3\nG1 Z2 F1100; back up from buildplate\nM132 AB; Activate auto-leveling\n\n; Extrude material over hole\nM133 T0; stabilize extruder temperature\nM126 S{cool_fan_speed_0}; Activate fan\nG4 P1000; Wait a little bit longer\nG1 Z0.10 E500 F50\nG1 X115 Y-95 F1000\nG92 E0 ; Set E to 0\n; End of start gcode" },
        "machine_steps_per_mm_e": { "default_value": 96.27520187033366 },
        "machine_steps_per_mm_x": { "default_value": 88.888889 },
        "machine_steps_per_mm_y": { "default_value": 88.888889 },
        "machine_steps_per_mm_z": { "default_value": 400 },
        "machine_width": { "default_value": 265 },
        "material_diameter": { "default_value": 1.75 }
    }
}