Cura/resources/definitions/weedo_f152s.def.json

{
    "version": 2,
    "name": "WEEDO F152S",
    "inherits": "weedo_base",
    "metadata":
    {
        "visible": true,
        "author": "WEEDO",
        "manufacturer": "WEEDO",
        "file_formats": "text/x-gcode",
        "platform_offset": [
            0,
            0,
            0
        ]
    },
    "overrides":
    {
        "machine_depth": { "default_value": 185 },
        "machine_end_gcode": { "default_value": ";(**** end.gcode for F152S****)\nM203 Z15\nG1 X170 Y130 F3000\nG92 E0\nG1 E-10 F1680\nG28 Z F400; Get extruder out of way. Uncomment to use!\nM107 ; Turn off fan\n; Disable all extruder\nM104 T0 S0\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM140 S0 ; Disable heated bed\nM84 ; Turn steppers off" },
        "machine_height": { "default_value": 195 },
        "machine_name": { "default_value": "WEEDO F152S" },
        "machine_start_gcode": { "default_value": ";MachineType:{machine_name}\n;FilamentType:{material_type}\n;InfillDensity:{infill_sparse_density}\n;Extruder0Temperature:{material_print_temperature}\n;BedTemperature:{material_bed_temperature}\n\n;(**** start.gcode for F152S ****)\nM203 Z15\nM104 S170\nG28 ; Home extruder\nG29\nM107 ; Turn off fan\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG1 Z20\nM109 S{material_print_temperature_layer_0}\nG92 E0 ; Reset extruder position\nG1 X140 Y7 Z0.27 F4000\nG1 X40 Y7 Z0.27 E25 F1000\nG92 E0\nM203 Z5" },
        "machine_width": { "default_value": 200 },
        "retraction_amount": { "default_value": 1.2 }
    }
}