Cura/resources/definitions/structur3d_discov3ry1_complete_um2plus.def.json

{
    "version": 2,
    "name": "Discov3ry Complete",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": true,
        "author": "Andrew Finkle, CTO",
        "manufacturer": "Structur3d.io",
        "file_formats": "text/x-gcode",
        "platform": "ultimaker2_platform.obj",
        "firmware_file": "MarlinUltimaker2plus.hex",
        "first_start_actions": [],
        "has_machine_quality": false,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains": { "0": "structur3d_discov3ry1_complete_um2plus_extruder_0" },
        "platform_offset": [
            0,
            0,
            0
        ],
        "platform_texture": "Ultimaker2Plusbackplate.png",
        "preferred_material": "structur3d_dap100silicone",
        "preferred_quality_type": "extra_fast",
        "preferred_variant_name": "0.84mm (Green)",
        "supported_actions": [],
        "variants_name": "Print Core"
    },
    "overrides":
    {
        "adhesion_type": { "default_value": "skirt" },
        "gantry_height": { "value": "52" },
        "infill_sparse_density": { "value": 100 },
        "layer_height_0": { "value": "round(machine_nozzle_size / 1.5, 2)" },
        "line_width": { "value": "round(machine_nozzle_size * 0.875, 2)" },
        "machine_depth": { "default_value": 205 },
        "machine_disallowed_areas":
        {
            "default_value": [
                [
                    [-115, 112.5],
                    [-78, 112.5],
                    [-80, 102.5],
                    [-115, 102.5]
                ],
                [
                    [115, 112.5],
                    [115, 102.5],
                    [105, 102.5],
                    [103, 112.5]
                ],
                [
                    [-115, -112.5],
                    [-115, -104.5],
                    [-84, -104.5],
                    [-82, -112.5]
                ],
                [
                    [115, -112.5],
                    [108, -112.5],
                    [110, -104.5],
                    [115, -104.5]
                ]
            ]
        },
        "machine_end_gcode": { "default_value": "M104 S0 ;extruder heater off \nM140 S0 ;heated bed heater off (if you have it) \nM92 E282 ;reset extruder EEPROM steps/mm for plastic filament \nG91 ;relative positioning \nG1 E-1 F300  ;retract the filament a bit before lifting the nozzle, to release some of the pressure \nG1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more \nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way \nM84 ;steppers off\nG90 ;absolute positioning" },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-44, 14],
                [-44, -34],
                [64, 14],
                [64, -34]
            ]
        },
        "machine_heat_zone_length": { "default_value": 20 },
        "machine_height": { "default_value": 205 },
        "machine_name": { "default_value": "Discov3ry Complete (Ultimaker 2+)" },
        "machine_show_variants": { "default_value": true },
        "machine_start_gcode": { "default_value": "\n;Updated Firmware (.hex and Marlin .ino) for \n;Ultimaker 2+ with Discov3ry Extruder available at: \n;https://github.com/Structur3d/UM2.1Discov3ry-Firmware-beta \n;**Learn more at https://www.structur3d.io** \n \nM104 S{material_print_temperature} ;Start heating extruder  \nM140 S{material_bed_temperature} ;Start heating bed \nG21 ;metric values \nG90 ;absolute positioning \nM82 ;set extruder to absolute mode \nM107 ;start with the fan off \nM302 ;allow cold extrusion \nM92 E2589 ;set extruder EEPROM steps/mm for paste \nG28 Z0 ;move Z to bottom endstops \nG28 X0 Y0 ;move X/Y to endstops \nG1 X15 Y0 F4000 ;move X/Y to front of printer \nG1 Z15.0 F9000 ;move the platform to 15mm \nG92 E0 ;zero the extruded length \nG1 F200 E10 ;extrude 10 mm of feed stock \nG92 E0 ;zero the extruded length again \nG1 F9000 \n;Put printing message on LCD screen \nM117 Printing..." },
        "machine_width": { "default_value": 205 },
        "retraction_hop_enabled": { "value": true },
        "skirt_brim_minimal_length": { "value": 1500 },
        "speed_print": { "value": 15 },
        "speed_support": { "value": "speed_wall_0" },
        "speed_wall_x": { "value": "speed_wall" }
    }
}