| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667 |
- {
- "version": 2,
- "name": "Lotmaxx SC-10",
- "inherits": "fdmprinter",
- "metadata":
- {
- "visible": true,
- "author": "lotmaxx.com",
- "manufacturer": "Lotmaxx",
- "file_formats": "text/x-gcode",
- "platform": "lotmaxx_sc_10_20_platform.3mf",
- "has_materials": true,
- "machine_extruder_trains": { "0": "lotmaxx_sc10_extruder_0" }
- },
- "overrides":
- {
- "acceleration_enabled": { "value": false },
- "adhesion_type": { "value": "'none' if support_enable else 'skirt'" },
- "cool_fan_enabled": { "value": true },
- "cool_fan_full_at_height": { "value": "layer_height_0 + 2 * layer_height" },
- "cool_min_layer_time": { "value": 10 },
- "gantry_height": { "value": 40 },
- "jerk_print": { "value": 8 },
- "jerk_travel": { "value": "jerk_print" },
- "jerk_travel_layer_0": { "value": "jerk_travel" },
- "machine_depth": { "default_value": 235 },
- "machine_end_gcode": { "default_value": "; SC-10 Custom End G-code\nG4 ; Wait\nM220 S100 ; Reset Speed factor override percentage to default (100%)\nM221 S100 ; Reset Extrude factor override percentage to default (100%)\nG91 ; Set coordinates to relative\nG1 F1800 E-3 ; Retract filament 3 mm to prevent oozing\nG1 F3000 Z20 ; Move Z Axis up 20 mm to allow filament ooze freely\nG90 ; Set coordinates to absolute\nG1 X0 Y{machine_depth} F1000 ; Move Heat Bed to the front for easy print removal\nM84 ; Disable stepper motors\n; End of custom end GCode" },
- "machine_head_with_fans_polygon":
- {
- "default_value": [
- [-32, 11],
- [-32, -32],
- [28, -32],
- [28, 11]
- ]
- },
- "machine_heated_bed": { "default_value": true },
- "machine_height": { "default_value": 320 },
- "machine_max_jerk_e": { "value": 5 },
- "machine_max_jerk_xy": { "value": 10 },
- "machine_max_jerk_z": { "value": 0.4 },
- "machine_name": { "default_value": "Lotmaxx SC-10" },
- "machine_start_gcode": { "default_value": "; SC-10 Custom Start G-code\nG28 ; Home all axes\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\nG1 X0.1 Y20 Z0.3 F5000.0 ; Move to start position\nG1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line\nG1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little\nG1 X0.4 Y20 Z0.3 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nG1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed\n; End of custom start GCode" },
- "machine_width": { "default_value": 235 },
- "material_diameter": { "default_value": 1.75 },
- "meshfix_maximum_resolution": { "value": "0.25" },
- "meshfix_maximum_travel_resolution": { "value": "meshfix_maximum_resolution" },
- "retraction_count_max": { "value": 100 },
- "retraction_enable": { "value": true },
- "retraction_extrusion_window": { "value": 10 },
- "retraction_min_travel": { "value": 1.5 },
- "skirt_brim_speed": { "value": "speed_layer_0" },
- "skirt_gap": { "value": 5.0 },
- "skirt_line_count": { "value": 4 },
- "speed_infill": { "value": "speed_print * 2" },
- "speed_layer_0": { "value": 20.0 },
- "speed_prime_tower": { "value": "speed_topbottom" },
- "speed_print": { "value": 60.0 },
- "speed_roofing": { "value": "speed_topbottom" },
- "speed_support": { "value": "speed_wall_0" },
- "speed_support_interface": { "value": "speed_topbottom" },
- "speed_travel": { "value": "150.0 if speed_print < 60 else 250.0 if speed_print > 100 else speed_print * 2.5" },
- "speed_travel_layer_0": { "value": "100 if speed_layer_0 < 20 else 150 if speed_layer_0 > 30 else speed_layer_0 * 5" },
- "speed_wall_0": { "value": "speed_wall" },
- "speed_wall_x": { "value": "speed_wall" }
- }
- }
|
