Cura/resources/definitions/atmat_signal_pro_base.def.json

{
    "version": 2,
    "name": "Signal Pro Base",
    "inherits": "fdmprinter",
    "metadata":
    {
        "visible": false,
        "author": "ATMAT",
        "manufacturer": "ATMAT sp. z o.o.",
        "file_formats": "text/x-gcode",
        "exclude_materials": [
            "dsm_arnitel2045",
            "dsm_novamid1070",
            "generic_cpe",
            "imade3d_petg",
            "imade3d_pla",
            "innofill_innoflex60",
            "verbatim_bvoh"
        ],
        "has_machine_quality": true,
        "has_materials": true,
        "has_variants": true,
        "machine_extruder_trains":
        {
            "0": "atmat_signal_pro_extruder_left",
            "1": "atmat_signal_pro_extruder_right"
        },
        "preferred_material": "generic_pla_175",
        "preferred_quality_type": "fast",
        "preferred_variant_name": "V6 0.40mm",
        "supports_network_connection": false,
        "supports_usb_connection": false,
        "variants_name": "Nozzle"
    },
    "overrides":
    {
        "acceleration_enabled": { "value": "True" },
        "acceleration_layer_0": { "value": "250" },
        "acceleration_prime_tower": { "value": "1000" },
        "acceleration_print": { "value": "1000" },
        "acceleration_support": { "value": "1000" },
        "acceleration_support_interface": { "value": "750" },
        "acceleration_topbottom": { "value": "750" },
        "acceleration_travel": { "value": "1000" },
        "acceleration_wall": { "value": "750" },
        "acceleration_wall_0": { "value": "500" },
        "adhesion_type": { "default_value": "skirt" },
        "alternate_extra_perimeter": { "value": "True" },
        "bridge_fan_speed": { "value": "100" },
        "bridge_fan_speed_2": { "resolve": "max(cool_fan_speed, 50)" },
        "bridge_fan_speed_3": { "resolve": "max(cool_fan_speed, 20)" },
        "bridge_settings_enabled": { "value": "True" },
        "bridge_wall_coast": { "value": "10" },
        "build_volume_temperature": { "maximum_value_warning": 45 },
        "cool_fan_full_at_height": { "value": "resolveOrValue('layer_height_0') + resolveOrValue('layer_height') * max(1, cool_fan_full_layer - 1)" },
        "cool_fan_full_layer": { "value": "4" },
        "cool_fan_speed_min": { "value": "cool_fan_speed" },
        "cool_min_layer_time": { "value": "15" },
        "cool_min_layer_time_fan_speed_max": { "value": "20" },
        "extruder_prime_pos_abs": { "value": "True" },
        "fill_outline_gaps": { "value": "True" },
        "gantry_height": { "value": 30 },
        "infill_before_walls": { "value": "False" },
        "infill_enable_travel_optimization": { "value": "True" },
        "jerk_enabled": { "value": "True" },
        "jerk_layer_0": { "value": "5" },
        "jerk_prime_tower": { "value": "jerk_print" },
        "jerk_print": { "value": "10" },
        "jerk_support": { "value": "jerk_print" },
        "jerk_support_interface": { "value": "jerk_print" },
        "jerk_topbottom": { "value": "jerk_print" },
        "jerk_travel": { "value": "jerk_layer_0" },
        "jerk_travel_layer_0": { "value": "jerk_layer_0" },
        "jerk_wall": { "value": "jerk_print" },
        "jerk_wall_0": { "value": "jerk_print" },
        "layer_height_0": { "resolve": "max(0.2, min(extruderValues('layer_height')))" },
        "line_width": { "value": "machine_nozzle_size * 1.125" },
        "machine_acceleration": { "default_value": 1500 },
        "machine_depth": { "default_value": 300 },
        "machine_end_gcode": { "default_value": "M104 T0 S0                     ;extruder heater off\nM104 T1 S0                     ;extruder heater off\nM140 S0                     ;heated bed heater off\nG91\nG1 Z1 F420                                        ;relative positioning\nG1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+1 E-1 F300 ;move Z up a bit and retract filament even more\nG90                         ;absolute positioning\nG1 X0 Y300 F6000                              ;move the head out of the way\nM84                         ;steppers off" },
        "machine_extruder_count": { "default_value": 2 },
        "machine_gcode_flavor": { "default_value": "RepRap (Marlin/Sprinter)" },
        "machine_head_with_fans_polygon":
        {
            "default_value": [
                [-35, 65],
                [-35, -50],
                [35, -50],
                [35, 65]
            ]
        },
        "machine_heated_bed": { "default_value": true },
        "machine_heated_build_volume": { "default_value": true },
        "machine_height": { "default_value": 300 },
        "machine_max_acceleration_x": { "default_value": 1500 },
        "machine_max_acceleration_y": { "default_value": 1500 },
        "machine_max_acceleration_z": { "default_value": 250 },
        "machine_max_feedrate_e": { "default_value": 120 },
        "machine_max_feedrate_z": { "default_value": 10 },
        "machine_max_jerk_e": { "default_value": 15 },
        "machine_max_jerk_xy": { "default_value": 15 },
        "machine_max_jerk_z": { "default_value": 1 },
        "machine_name": { "default_value": "Signal Pro" },
        "machine_start_gcode": { "default_value": "G21 ; set units to millimeters\nG90 ; use absolute positioning\nM82 ; absolute extrusion mode\nG28 ; home all without mesh bed level\nM420 S1\nG92 E0.0 ; reset extruder distance position\nG1 Z0.25\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E21.5 F1000.0 ; intro line\nG92 E0.0 ; reset extruder distance position" },
        "machine_width": { "default_value": 300 },
        "material_bed_temperature": { "maximum_value_warning": 140 },
        "material_print_temperature": { "maximum_value_warning": 295 },
        "meshfix_maximum_deviation": { "value": "layer_height / 2" },
        "meshfix_maximum_resolution": { "value": "0.01" },
        "min_infill_area": { "value": "5.0" },
        "minimum_polygon_circumference": { "value": "0.2" },
        "optimize_wall_printing_order": { "value": "True" },
        "prime_tower_enable": { "value": "True" },
        "retraction_amount": { "value": "1" },
        "retraction_combing": { "value": "'noskin'" },
        "retraction_combing_max_distance": { "value": "10" },
        "retraction_hop": { "value": "0.5" },
        "retraction_hop_enabled": { "value": "True" },
        "retraction_prime_speed":
        {
            "maximum_value_warning": "130",
            "value": "math.ceil(retraction_speed * 0.4)"
        },
        "retraction_retract_speed":
        {
            "maximum_value_warning": "130",
            "value": "retraction_speed"
        },
        "retraction_speed":
        {
            "maximum_value_warning": "130",
            "value": "50"
        },
        "roofing_layer_count": { "value": "1" },
        "skirt_brim_minimal_length": { "value": "550" },
        "speed_layer_0": { "value": "math.ceil(speed_print * 0.25)" },
        "speed_roofing": { "value": "math.ceil(speed_print * 0.45)" },
        "speed_slowdown_layers": { "value": "2" },
        "speed_topbottom": { "value": "math.ceil(speed_print * 0.45)" },
        "speed_travel":
        {
            "maximum_value": "150",
            "maximum_value_warning": "151",
            "value": "150"
        },
        "speed_travel_layer_0": { "value": "math.ceil(speed_travel * 0.4)" },
        "speed_wall": { "value": "math.ceil(speed_print * 0.50)" },
        "speed_wall_0": { "value": "math.ceil(speed_print * 0.50)" },
        "speed_wall_x": { "value": "math.ceil(speed_print * 0.75)" },
        "support_angle": { "value": "60" },
        "support_bottom_distance": { "value": "support_z_distance / 2" },
        "support_bottom_enable": { "value": "False" },
        "support_brim_enable": { "value": "True" },
        "support_infill_rate": { "value": "20" },
        "support_interface_enable": { "value": "True" },
        "support_interface_height": { "value": "1" },
        "support_join_distance": { "value": "1" },
        "support_offset": { "value": "1.5" },
        "support_pattern": { "default_value": "zigzag" },
        "support_top_distance": { "value": "support_z_distance" },
        "support_xy_distance": { "value": "wall_line_width_0 * 2.5" },
        "support_xy_distance_overhang": { "value": "wall_line_width_0" },
        "support_z_distance": { "value": "layer_height" },
        "switch_extruder_prime_speed": { "value": "15" },
        "switch_extruder_retraction_amount": { "value": "2" },
        "travel_avoid_other_parts": { "value": "True" },
        "travel_avoid_supports": { "value": "True" },
        "wall_line_width": { "value": "machine_nozzle_size" },
        "wall_overhang_angle": { "value": "75" },
        "wall_overhang_speed_factor": { "value": "50" },
        "zig_zaggify_infill": { "value": "True" }
    }
}