Cura/resources/quality/liquid/liquid_vo0.4_CPE_Normal_Quality.inst.cfg

[general]
version = 4
name = Fine
definition = liquid

[metadata]
setting_version = 20
type = quality
quality_type = normal
weight = 0
material = generic_cpe
variant = VO 0.4

[values]
machine_nozzle_cool_down_speed = 0.85
machine_nozzle_heat_up_speed = 1.5
material_initial_print_temperature = =material_print_temperature - 5
material_final_print_temperature = =material_print_temperature - 10
retraction_combing_max_distance = 50
speed_print = 55
speed_layer_0 = =math.ceil(speed_print * 20 / 55)
speed_topbottom = =math.ceil(speed_print * 30 / 55)
speed_wall = =math.ceil(speed_print * 30 / 55)

infill_pattern = triangles
speed_infill = =math.ceil(speed_print * 45 / 55)