Cura/resources/quality/deltacomb/deltacomb_nylon_normal.inst.cfg

[general]
version = 4
name = Normal Quality (beta)
definition = deltacomb

[metadata]
setting_version = 5
type = quality
quality_type = normal
weight = 0
material = generic_nylon

[values]
adhesion_type = raft
brim_width = 4
cool_fan_enabled = False
cool_fan_full_at_height = 0.45
cool_fan_speed = 0
cool_fan_speed_max = 0
cool_fan_speed_min = 0
cool_min_layer_time = 5
cool_min_speed = 0
infill_overlap = 15
infill_sparse_density = 24
layer_height = 0.15
layer_height_0 = 0.10
line_width = =machine_nozzle_size
material_flow = 100
raft_airgap = 0.22
raft_base_line_width= =line_width * 2
raft_base_thickness = =layer_height_0 * 2
raft_interface_line_width  = =line_width
raft_interface_thickness = =layer_height
raft_margin = 5
raft_surface_layers = 2
raft_surface_line_width = =line_width
raft_surface_thickness = =layer_height
retraction_hop = 0.5
retraction_hop_enabled = False
retraction_hop_only_when_collides = True
skin_overlap = 10
skirt_brim_minimal_length = 75
skirt_gap = 1.5
skirt_line_count = 5
speed_infill = =speed_print
speed_layer_0 = =math.ceil(speed_print * 25 / 50)
speed_print = 50
speed_topbottom = =math.ceil(speed_print * 40 / 50)
speed_travel = 200
speed_wall_0 = =math.ceil(speed_print * 40 / 50)
speed_wall_x = =speed_print
support_angle = 70
support_type = buildplate
support_z_distance = 0.15
top_bottom_thickness = 0.8
wall_thickness = 0.8
z_seam_type = random