Cura/resources/quality/anycubic_kobra/anycubic_kobra_abs.inst.cfg

[general]
version = 4
name = Suggested parameters for ABS_V1.0
definition = anycubic_kobra

[metadata]
setting_version = 20
type = quality
quality_type = abs
weight = 0
global_quality = True

[values]
layer_height = 0.2
acceleration_enabled = True
default_material_bed_temperature = 80
jerk_enabled = True
layer_height_0 = 0.2
acceleration_print = 800
acceleration_travel = 3000
acceleration_travel_layer_0 = 3000.0
bottom_layers = 6
brim_width = 7.0
default_material_print_temperature = 230
infill_overlap = 15
infill_sparse_density = 20
initial_layer_line_width_factor = 140
jerk_print = 8
jerk_travel = 10
material_final_print_temperature = 230
material_flow = 100
material_flow_layer_0 = 120
material_initial_print_temperature = 230
optimize_wall_printing_order = True
inset_direction = outside_in
retraction_amount = 6
retraction_min_travel = =line_width * 2
retraction_speed = 40
skirt_brim_speed = 40
speed_print = 50
speed_travel = 100
top_bottom_thickness = 1.2
wall_thickness = 1.2
z_seam_type = sharpest_corner
z_seam_x = 110
z_seam_y = 220