Cura/resources/definitions/rigid3d_hobby.def.json

{
    "name": "Rigid3D Hobby",
    "version": 2,
    "inherits": "rigid3d_base",
    "metadata": {
		"visible": true,
		"quality_definition": "rigid3d_base",	
		"preferred_quality_type": "standard",

        "preferred_material": "generic_pla_175",
        "exclude_materials": [
			"chromatik_pla",
            "dsm_arnitel2045_175",
            "dsm_novamid1070_175",
			"emotiontech_abs",
			"emotiontech_asax",
			"emotiontech_hips",
			"emotiontech_petg",
			"emotiontech_pla",
			"emotiontech_pva-m",
			"emotiontech_pva-oks",
			"emotiontech_pva-s",
			"emotiontech_tpu98a",
            "fabtotum_abs",
            "fabtotum_nylon",
            "fabtotum_pla",
            "fabtotum_tpu",
            "fiberlogy_hd_pla",
            "filo3d_pla",
            "filo3d_pla_green",
            "filo3d_pla_red",
            "generic_abs",
			"generic_abs_175",
            "generic_bam",
            "generic_cffcpe",
            "generic_cffpa",
            "generic_cpe",
			"generic_cpe_175",
            "generic_cpe_plus",
            "generic_gffcpe",
            "generic_gffpa",
            "generic_hips",
			"generic_hips_175",
            "generic_nylon",
			"generic_nylon_175",
            "generic_pc",
			"generic_pc_175",
            "generic_petg",
			"generic_petg_175",
            "generic_pla",
            "generic_pp",
            "generic_pva",
			"generic_pva_175",
            "generic_tough_pla",
            "generic_tpu",
			"generic_tpu_175",
            "imade3d_petg_175",
            "imade3d_pla_175",
            "innofill_innoflex60_175",
			"leapfrog_abs_natural",
			"leapfrog_epla_natural",
			"leapfrog_pva_natural",
            "octofiber_pla",
            "polyflex_pla",
            "polymax_pla",
            "polyplus_pla",
            "polywood_pla",
            "structur3d_dap100silicone",
            "tizyx_abs",
            "tizyx_flex",
            "tizyx_petg",
            "tizyx_pla",
            "tizyx_pla_bois",
            "tizyx_pva",
            "verbatim_bvoh_175",
            "Vertex_Delta_ABS",
            "Vertex_Delta_PET",
            "Vertex_Delta_PLA",
            "Vertex_Delta_PLA_Glitter",
            "Vertex_Delta_PLA_Mat",
            "Vertex_Delta_PLA_Satin",
            "Vertex_Delta_PLA_Wood",
            "Vertex_Delta_TPU",
            "zyyx_pro_flex",
            "zyyx_pro_pla"
        ]		
    },
    "overrides": {
        "machine_name": { "default_value": "Rigid3D Hobby" },

		"machine_heated_bed": { "default_value": false },
		
		"machine_width": { "default_value": 150 },
        "machine_depth": { "default_value": 150 },
        "machine_height": { "default_value": 150 },
		
		"machine_center_is_zero": { "default_value": false },
		
		"machine_start_gcode": {"default_value": "G21\nG28 ; Home extruder\nM420 S1 ; Enable MBL\nM107 ; Turn off fan\nG91 ; Relative positioning\nG1 Z5 F180;\nG1 X30 Y30 F3000;\nG90 ; Absolute positioning\nM82 ; Extruder in absolute mode\nG92 E0 ; Reset extruder position\n"},
        "machine_end_gcode": {"default_value": "G1 X0 Y145 ; Get extruder out of way.\nM107 ; Turn off fan\nG91 ; Relative positioning\nG0 Z20 ; Lift extruder up\nT0\nG1 E-1 ; Reduce filament pressure\nM104 T0 S0 ; Turn extruder heater off\nG90 ; Absolute positioning\nG92 E0 ; Reset extruder position\nM84 ; Turn steppers off\n"},
		
		"machine_head_with_fans_polygon": { 
            "default_value": [
                 [ -16, -30], [ -16, 45], [ 16, -30], [ 16, 45]
				 ] 
        },

        "gantry_height": { "value": 20 }
    }
}