1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889909192 |
- {
- "id": "BIBO2 dual",
- "version": 2,
- "name": "BIBO2 dual",
- "inherits": "fdmprinter",
- "metadata": {
- "visible": true,
- "author": "na",
- "manufacturer": "BIBO",
- "category": "Other",
- "file_formats": "text/x-gcode",
- "has_materials": true,
- "machine_extruder_trains": {
- "0": "bibo2_dual_extruder_0",
- "1": "bibo2_dual_extruder_1"
- },
- "first_start_actions": [
- "MachineSettingsAction"
- ]
- },
- "overrides": {
- "machine_name": {
- "default_value": "BIBO2 dual"
- },
- "machine_width": {
- "default_value": 214
- },
- "machine_height": {
- "default_value": 160
- },
- "machine_depth": {
- "default_value": 186
- },
- "machine_center_is_zero": {
- "default_value": true
- },
- "machine_heated_bed": {
- "default_value": true
- },
- "machine_nozzle_heat_up_speed": {
- "default_value": 2
- },
- "machine_nozzle_cool_down_speed": {
- "default_value": 2
- },
- "machine_head_with_fans_polygon": {
- "default_value": [
- [
- -68.18,
- 64.63
- ],
- [
- -68.18,
- -47.38
- ],
- [
- 35.18,
- 64.63
- ],
- [
- 35.18,
- -47.38
- ]
- ]
- },
- "gantry_height": {
- "default_value": 12
- },
- "machine_use_extruder_offset_to_offset_coords": {
- "default_value": true
- },
- "machine_gcode_flavor": {
- "default_value": "RepRap (Marlin/Sprinter)"
- },
- "machine_start_gcode": {
- "default_value": "G21 ;metric values\nG90 ;absolute positioning\nM107 ;start with the fan off\nG28 X0 Y0 ;move X/Y to min endstops\nG28 Z0 ;move Z to min endstops\nG1 Z2.0 F400 ;move the platform down 15mm\nT0\nG92 E0\nG28\nG1 Y0 F1200 E0\nG92 E0\nM117 BIBO Printing..."
- },
- "machine_end_gcode": {
- "default_value": ";End GCode\nM104 T0 S0 ;extruder heater off\nM104 T1 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG91\nG1 Z1 F100 ;relative positioning\nG1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z+0.5 E-2 X-20 Y-20 F300 ;move Z up a bit and retract filament even more\nG28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way\nM84 ;steppers off\nG90 ;absolute positioning"
- },
- "machine_extruder_count": {
- "default_value": 2
- },
- "prime_tower_position_x": {
- "default_value": 50
- },
- "prime_tower_position_y": {
- "default_value": 50
- }
- }
- }
|