| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149 |
- [general]
- name = Advanced
- weight = 2
- version = 2
- [machine_settings]
- [resolution]
- layer_height
- layer_height_0
- line_width
- wall_line_width
- wall_line_width_0
- wall_line_width_x
- skin_line_width
- infill_line_width
- initial_layer_line_width_factor
- [shell]
- wall_extruder_nr
- wall_0_extruder_nr
- wall_x_extruder_nr
- wall_thickness
- wall_line_count
- optimize_wall_printing_order
- xy_offset
- [top_bottom]
- top_bottom_extruder_nr
- top_bottom_thickness
- top_thickness
- top_layers
- bottom_thickness
- bottom_layers
- ironing_enabled
- skin_monotonic
- small_skin_width
- small_skin_on_surface
- [infill]
- infill_extruder_nr
- infill_sparse_density
- infill_line_distance
- infill_pattern
- infill_multiplier
- infill_overlap
- infill_sparse_thickness
- gradual_infill_steps
- [material]
- material_print_temperature
- material_print_temperature_layer_0
- material_initial_print_temperature
- material_final_print_temperature
- material_bed_temperature
- material_bed_temperature_layer_0
- retraction_enable
- retract_at_layer_change
- retraction_amount
- retraction_speed
- material_standby_temperature
- [speed]
- speed_print
- speed_infill
- speed_wall
- speed_wall_0
- speed_wall_x
- speed_topbottom
- speed_support
- speed_prime_tower
- speed_travel
- speed_layer_0
- skirt_brim_speed
- acceleration_enabled
- jerk_enabled
- [travel]
- retraction_combing
- travel_avoid_other_parts
- travel_avoid_supports
- travel_avoid_distance
- retraction_hop_enabled
- retraction_hop_only_when_collides
- retraction_hop
- retraction_hop_after_extruder_switch
- [cooling]
- cool_fan_enabled
- cool_fan_speed
- cool_fan_speed_min
- cool_fan_speed_max
- cool_min_layer_time_fan_speed_max
- cool_fan_speed_0
- cool_fan_full_at_height
- cool_fan_full_layer
- cool_min_layer_time
- cool_min_speed
- cool_lift_head
- [support]
- support_enable
- support_extruder_nr
- support_infill_extruder_nr
- support_extruder_nr_layer_0
- support_interface_extruder_nr
- support_structure
- support_type
- support_angle
- support_pattern
- support_infill_rate
- support_offset
- support_infill_sparse_thickness
- gradual_support_infill_steps
- gradual_support_infill_step_height
- support_interface_enable
- support_roof_enable
- support_bottom_enable
- [platform_adhesion]
- prime_blob_enable
- adhesion_type
- adhesion_extruder_nr
- skirt_line_count
- brim_width
- brim_line_count
- brim_location
- [dual]
- prime_tower_enable
- prime_tower_mode
- prime_tower_position_x
- prime_tower_position_y
- prime_tower_brim_enable
- [meshfix]
- [blackmagic]
- print_sequence
- user_defined_print_order_enabled
- magic_mesh_surface_mode
- magic_spiralize
- smooth_spiralized_contours
- [experimental]
- interlocking_enable
- conical_overhang_enabled
- support_conical_enabled
- adaptive_layer_height_enabled
|
