| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677 |
- [general]
- definition = ultimaker_s5
- name = Fast
- version = 4
- [metadata]
- material = ultimaker_tough_pla
- quality_type = draft
- setting_version = 23
- type = quality
- variant = AA 0.8
- weight = -2
- [values]
- _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size = 0.2
- _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled = True
- _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration = 2
- acceleration_infill = =acceleration_print
- acceleration_ironing = 1000
- acceleration_layer_0 = =acceleration_wall_0
- acceleration_print = 3500
- acceleration_roofing = =acceleration_wall_0
- acceleration_topbottom = =acceleration_wall
- acceleration_wall = =acceleration_infill
- acceleration_wall_0 = 1500
- acceleration_wall_x = =acceleration_wall
- bridge_skin_material_flow = 200
- bridge_skin_speed = =bridge_wall_speed
- bridge_sparse_infill_max_density = 50
- bridge_wall_material_flow = 200
- bridge_wall_speed = 30
- cool_min_layer_time = 6
- infill_pattern = ='zigzag' if infill_sparse_density > 80 else 'grid'
- infill_sparse_density = 15
- jerk_infill = =jerk_print
- jerk_layer_0 = =jerk_wall_0
- jerk_print = =max(30, speed_print/2)
- jerk_roofing = =jerk_wall_0
- jerk_topbottom = =jerk_wall
- jerk_wall = =jerk_infill
- jerk_wall_0 = =max(30, speed_wall_0/2)
- machine_nozzle_cool_down_speed = 1.3
- machine_nozzle_heat_up_speed = 1.9
- material_extrusion_cool_down_speed = 0.7
- material_flow = 93
- material_max_flowrate = 17
- material_print_temperature = =default_material_print_temperature + 10
- meshfix_maximum_resolution = 0.7
- optimize_wall_printing_order = False
- prime_tower_enable = True
- raft_airgap = 0.25
- retraction_amount = 4
- retraction_prime_speed = 22
- retraction_speed = 45
- small_skin_on_surface = False
- small_skin_width = 4
- speed_infill = =speed_print
- speed_ironing = 20
- speed_layer_0 = 26
- speed_prime_tower = =speed_wall_0
- speed_print = 100
- speed_roofing = =math.ceil(speed_wall*(45/100))
- speed_support_interface = =speed_wall_0
- speed_topbottom = =speed_print
- speed_wall = =speed_infill
- speed_wall_0 = =math.ceil(speed_wall*(30/100))
- speed_wall_x = =speed_wall
- speed_wall_x_roofing = =speed_roofing
- support_angle = 70
- support_interface_enable = False
- support_structure = tree
- top_bottom_thickness = =max(1 , layer_height * 5)
- wall_0_wipe_dist = 0.8
- z_seam_relative = True
- z_seam_type = back
- zig_zaggify_infill = True
|
